Green Synthesis of a Cu/SiO2 Catalyst for Efficient H2-SCR of NO

Tailoring Cu-SiO2 Interaction through Nanocatalyst Architecture to Assemble Surface Sites for Furfural Aqueous-Phase Hydrogenation to Cycloketones

In this contribution, nanocatalysts with rather diverse architectures were designed to promote different intimacy degrees between Cu and SiO2 and consequently tune distinct Cu-SiO2 interactions. Previously synthesized copper nanoparticles were deposited onto SiO2 (NPCu/SiO2) in contrast to ordinarily prepared supported Cu/SiO2. NPCu@SiO2 and SiO2@Cu core-shell nanocatalysts were also synthesized, and they were all bulk and surface characterized by XRD, TGA, TEM/HRTEM, H2-TPR, XANES, and XPS. It was found that Cu0 is the main copper phase in NPCu/SiO2 while Cu2+ rules the ordinary Cu/SiO2 catalyst, and Cu0 and electron-deficient Cuδ+ species coexist in the core-shell nanocatalysts as a consequence of a deeper metal-support interaction. Catalytic performance could not be associated with the physical properties of the nanocatalysts derived from their architectures but was associated with the more refined chemical characteristics tuned by their design. Cu/SiO2 and NPCu/SiO2 catalysts led to the formation of furfuryl alcohol, evidencing that catalysts holding weak or no metal-support interaction have no significant impact on product distribution even in the aqueous phase. The establishment of such interactions through advanced catalyst architecture, allowing the formation of electron-deficient Cuδ+ moieties, particularly Cu2+ and Cu+ as unveiled by spectroscopic investigations, is critical to promoting the hydrogenation-ring rearrangement cascade mechanism leading to cycloketones.

Boosting the performance of Ni/Al2O3 for the reverse water gas shift reaction through formation of CuNi nanoalloys

Adding Cu to Ni/Al2O3 is an excellent strategy to suppress methane formation and enhance carbon monoxide yield through formation of alloyed nanoparticles.

Rational design of tandem catalysts using a core-shell structure approach

A facile and rational approach to synthesize bimetallic heterogeneous tandem catalysts is presented. Using core-shell structures, it is possible to create spatially controlled ensembles of different nanoparticles and investigate coupled chemocatalytic reactions. The CO2 hydrogenation to methane and light olefins was tested, achieving a tandem process successfully.

Sonophotocatalytic Degradation of Malachite Green by Nanocrystalline Chitosan-Ascorbic Acid@NiFe2O4 Spinel Ferrite

Statistics show that more than 700 thousand tons of dye are produced annually across the globe. Around 10–20% of this is used in industrial processes such as printing and dyeing, while about 50% of the dye produced is discharged into the environment without proper physicochemical treatment. Even trace amounts of dye in water can reduce oxygen solubility and have carcinogenic, mutagenic, and toxic effects on aquatic organisms. Therefore, before dye-containing wastewater is discharged into the environment, it must be properly treated. The present study investigates the green synthesis of nickel ferrite NiFe2O4 (NIFE) spinel magnetic nanoparticles (MNPs) via chemical coprecipitation of a solution of Ni2+/Fe3+ in the presence of a biopolymer blend of chitosan (CT) and ascorbic acid (AS). The magnetic nanomaterial was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy–energy dispersive X-ray analysis (SEM-EDX), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-Vis), differential scanning calorimetry (DSC), and vibrating-sample magnetometry (VSM). The material was further explored as a catalyst for the photocatalytic degradation of malachite green (MG) under visible light irradiation coupled with ultrasonic waves. The combination of 90 min of visible solar light irradiation with 6.35 W·mL−1 ultrasonic power at pH 8 resulted in 99% of the photocatalytic efficiency of chitosan-ascorbic acid@NIFE (CTAS@NIFE) catalyst for 70 mg·L−1 MG. The quenching of the photocatalytic efficiency from 98% to 64% in the presence of isopropyl alcohol (IPA) suggested the involvement of hydroxy (•OH) radicals in the mineralization process of MG. The high regression coefficients (R2) of 0.99 for 35, 55, and 70 mg·L−1 MG indicated the sonophotocatalysis of MG by CTAS@NIFE was best defined by a pseudo first-order kinetic model. The mechanism involves the adsorption of MG on the catalyst surface in the first step and thereby mineralization of the MG by the generated hydroxyl radicals (•OH) under the influence of visible radiation coupled with 6.34 W·mL−1 ultrasonic power. In the present study the application of photodegradation process with sonochemistry results in 99% of MG mineralization without effecting the material structure unlike happens in the case adsorption process. So, the secondary pollution (generally happens in case of adsorption) can be avoided by reusing the spent material for another application instead of disposing it. Thus, the ecofriendly synthesis protocol, ease in design of experimentation like use of solar irradiation instead of electric power lamps, reusability and high efficiency of the material suggested the study to be potentially economical for industrial development at pilot scale towards wastewater remediation.