Diatoms for Carbon Sequestration and Bio-Based Manufacturing

Revealing the static and dynamic nanomechanical properties of diatom frustules—Nature's glass lace

Diatoms are single cell microalgae enclosed in silica exoskeletons (frustules) that provide inspiration for advanced hybrid nanostructure designs mimicking multi-scale porosity to achieve outstanding mechanical and optical properties. Interrogating the structure and properties of diatoms down to nanometer scale leads to breakthrough advances reported here in the nanomechanical characterization of Coscinodiscus oculus-iridis diatom pure silica frustules, as well as of air-dried and wet cells with organic content. Static and dynamic mode Atomic Force Microscopy (AFM) and in-SEM nanoindentation revealed the peculiarities of diatom response with separate contributions from material nanoscale behavior and membrane deformation of the entire valve. Significant differences in the nanomechanical properties of the different frustule layers were observed. Furthermore, the deformation response depends strongly on silica hydration and on the support from the internal organic content. The cyclic loading revealed that the average compliance of the silica frustule is 0.019 m/N and increases with increasing number of cycles. The structure–mechanical properties relationship has a direct impact on the vibrational properties of the frustule as a complex micrometer-sized mechanical system. Lessons from Nature’s nanostructuring of diatoms open up pathways to new generations of nano- and microdevices for electronic, electromechanical, photonic, liquid, energy storage, and other applications.

Media engineering in marine diatom Phaeodactylum tricornutum employing cost-effective substrates for sustainable production of high-value renewables

Phaeodactylum tricornutum is a marine diatom, rich in omega-3 polyunsaturated fatty acids especially eicosapentaenoic acid (EPA) and brown pigment, that is, fucoxanthin. These high-value renewables (HVRs) have a high commercial and nutritional relevance. In this study, our focus was to enhance the productivities of such renewables by employing media engineering strategy via., photoautotrophic (P1, P2, P3) and mixotrophic (M1, M2, M3, M4) modes of cultivation with varying substrate combinations of carbon (glycerol: 0.1 m) and nitrogen (urea: 441 mm and/or sodium nitrate: 882 mm). Our results demonstrate that mixotrophic [M4] condition supplemented with glycerol (0.1 m) and urea (441 mm) feed enhanced productivities (mg L^-1  day^-1 ) as follows: biomass (770.0), total proteins (36.0), total lipids (22.0), total carbohydrates (23.0) with fatty acid methyl esters (9.6), EPA (2.7), and fucoxanthin (1.1), respectively. The overall yield of EPA represents 28% of total fatty acids in the mixotrophic [M4] condition. In conclusion, our improved strategy of feeding urea to a glycerol-supplemented medium defines a new efficient biomass valorization paradigm with cost-effective substrates for the production of HVRs in oleaginous diatoms P. tricornutum.

Diatoms as a biotechnological resource for the sustainable biofuel production: a state-of-the-art review

The greenhouse gas emission from fossil fuel and higher economic cost in its transportation are stimulating scientists to explore biomass energy production at the local level. In the present review, the authors have explored the prospects of commercial-scale biofuels production from the microalgal group, diatoms. Insights on suitability of mass cultivation systems for large-scale production of diatoms have been deliberated based on published literature. Diatoms can proliferate extracting nutrients from the wastewater and the same biomass can be harvested for biofuel production. Residues can be further utilized for the formation of other bioproducts and biofertilizers. The residual applications of diatoms from mass culture are estimated to compensate for the additional costs incurred in the removal of impurities. Well-planned research is required to optimize the commercial-scale production of biofuels from diatoms. The aim of this review is therefore, to demonstrate the economically feasible, hygienically safe cultivation of diatoms on nutrients from wastewater, limitations in using diatoms for biofuel production, and how these limitations can be shorted out for optimum utilization of diatom for biofuel production.

A comprehensive review on carbon source effect of microalgae lipid accumulation for biofuel production

Energy is a major driving force for the economic development. Due to the scarcity of fossil fuels and negative impact on the environment, it is important to develop renewable and sustainable energy sources for humankind. Microalgae as the primary feedstock for biodiesel has shown great application potential. However, lipid yield from microalgae is limited by the upstream cost, which restrain the realization of large-scale biofuel production. The modification of lipid-rich microalgae cell has become the focus over the last few decades to improve the lipid content and productivity of microalgae. Carbon is a vital nutrient that regulates the growth and metabolism of microalgae. Different carbon sources are assimilated by microalgae cells via different pathways. Inorganic carbon sources are mainly used through the CO₂-concentrating mechanisms (CCMs), while organic carbon sources are absorbed by microalgae mainly through the Pentose Phosphate (PPP) Pathway and the Embden-Meyerhof-Pranas (EMP) pathway. Therefore, the addition of carbon source has a significant impact on the production of microalgae biomass and lipid accumulation. In this paper, mechanisms of lipid synthesis and carbon uptake of microalgae were introduced, and the effects of different carbon conditions (types, concentrations, and addition methods) on lipid accumulation in microalgal biomass production and biodiesel production were comprehensively discussed. This review also highlights the recent advances in microalgae lipid cultivation with large-scale commercialization and the development prospects of biodiesel production. Current challenges and constructive suggestions are proposed on cost-benefit concerns in large-scale production of microalgae biodiesel.

Structural Identification of Metalloproteomes in Marine Diatoms, an Efficient Algae Model in Toxic Metals Bioremediation

The biosorption of pollutants using microbial organisms has received growing interest in the last decades. Diatoms, the most dominant group of phytoplankton in oceans, are (i) pollution tolerant species, (ii) excellent biological indicators of water quality, and (iii) efficient models in assimilation and detoxification of toxic metal ions. Published research articles connecting proteomics with the capacity of diatoms for toxic metal removal are very limited. In this work, we employed a structural based systematic approach to predict and analyze the metalloproteome of six species of marine diatoms: Thalassiosira pseudonana, Phaeodactylum tricornutum, Fragilariopsis cylindrus, Thalassiosira oceanica, Fistulifera solaris, and Pseudo-nitzschia multistriata. The results indicate that the metalloproteome constitutes a significant proportion (~13%) of the total diatom proteome for all species investigated, and the proteins binding non-essential metals (Cd, Hg, Pb, Cr, As, and Ba) are significantly more than those identified for essential metals (Zn, Cu, Fe, Ca, Mg, Mn, Co, and Ni). These findings are most likely related to the well-known toxic metal tolerance of diatoms. In this study, metalloproteomes that may be involved in metabolic processes and in the mechanisms of bioaccumulation and detoxification of toxic metals of diatoms after exposure to toxic metals were identified and described.

Towards a Phaeodactylum tricornutum biorefinery in an outdoor UK environment

A series of commercial powdered media (Cell-Hi F2P, JWP and WP) and a hydroponics medium (FloraMicroBloom) were investigated for the cultivation of P. tricornutum, and compared with f/2 (a commonly employed laboratory cultivation medium; costlier to scale). Cell-Hi JWP showed good performance characteristics including cost-effectiveness. Outdoor cultivation of P. tricornutum in an airlift photobioreactor, using Cell-Hi JWP in the United Kingdom (UK) during September and October (average daily temperature ranging between 8 and 18 °C and natural sunlight) was comparable to cultivation indoors under controlled temperature and lighting. A strong positive correlation between fucoxanthin and chlorophyll a content, and a weak inverse correlation between eicosapentaenoic (EPA) content and temperature were observed. Commensal bacterial counts revealed a sinusoidal growth profile with a change in community dominance from Halomonas sp. to Marinobacter sp. This investigation reveals for the first time that a multi-product approach can be adopted with P. tricornutum in a UK outdoor environment using commercially viable powdered media.