Primary MSCs for Personalized Medicine: Ethical Challenges, Isolation and Biocompatibility Evaluation of 3D Electrospun and Printed Scaffolds

Controversies regarding transplantation of mesenchymal stem cells

Mesenchymal stem cells (MSCs) have tantalized regenerative medicine with their therapeutic potential, yet a cloud of controversies looms over their clinical transplantation. This comprehensive review navigates the intricate landscape of MSC controversies, drawing upon 15 years of clinical experience and research. We delve into the fundamental properties of MSCs, exploring their unique immunomodulatory capabilities and surface markers. The heart of our inquiry lies in the controversial applications of MSC transplantation, including the perennial debate between autologous and allogeneic sources, concerns about efficacy, and lingering safety apprehensions. Moreover, we unravel the enigmatic mechanisms surrounding MSC transplantation, such as homing, integration, and the delicate balance between differentiation and paracrine effects. We also assess the current status of clinical trials and the ever-evolving regulatory landscape. As we peer into the future, we examine emerging trends, envisioning personalized medicine and innovative delivery methods. Our review provides a balanced and informed perspective on the controversies, offering readers a clear understanding of the complexities, challenges, and potential solutions in MSC transplantation.

Biocompatible 3D-Printed Devices With Adipose Stem Cells in the Regenerative Process of Sciatic Nerve Lesions in Rodent Models: An Experimental Study

INTRODUCTION

Peripheral nerve injuries are a significant clinical challenge. The rat sciatic nerve serves as an ideal model for studying nerve regeneration. Extensive research has been conducted to unravel the intricate mechanisms involved in peripheral nerve regeneration, aiming to develop effective therapeutic strategies for nerve injury patients. Research including different types of materials that can be used as nerve guides like synthetic polymers have been investigated for their biocompatibility and molding properties. Among multiple stem cell types, adipose-derived stem cells (ASCs), bone marrow-derived mesenchymal stem cells (BM-MSCs), and induced pluripotent stem cells (iPSCs) have shown neuroprotective and regenerative important properties.

METHODS

The purposes of our study were to develop a protocol for rat sciatic nerve injury treated with 3D-printed guide and adipose stem cells to investigate nerve regeneration through histologic examination and biomechanical characteristics of muscular tissue. We use 20 (100%) male Wistar rats, measuring between 350 g ± 35 g, who underwent complete transection of the right sciatic nerve, resulting in a 1 cm defect. The group was separated into three subgroups: the first subgroup (n = 8) was treated with a 3D-printed guide with adipose stem cells, the second subgroup (n = 8) was treated with a 3D-printed guide without adipose stem cells, and the third subgroup (n = 4) was the control group. At four, eight, and 12 weeks, we measured with ultrasonography the grade of muscular atrophy. At 12 weeks, we harvested the sciatic nerve and performed a histological examination and mechanical investigation of the tibialis anterior muscle.

RESULTS

On the examined specimen of the first subgroup, cross-sectioned nerve structures were present, surrounded by a mature fibro-adipose connective tissue, with blood vessels. In the second subgroup, no nerve structure was observed on the examined sections, but in the polymorphic inflammatory infiltrate and control group, no signs of regeneration were found.

CONCLUSIONS

The present study shows a promising potential when utilizing adipose stem cell-based therapies for promoting peripheral nerve regeneration following large (>1 cm) nerve defects knowing that at this size, regeneration is impossible with known treatments.

Pharmaceutical Applications of Biomass Polymers: Review of Current Research and Perspectives

Polymers derived from natural biomass have emerged as a valuable resource in the field of biomedicine due to their versatility. Polysaccharides, peptides, proteins, and lignin have demonstrated promising results in various applications, including drug delivery design. However, several challenges need to be addressed to realize the full potential of these polymers. The current paper provides a comprehensive overview of the latest research and perspectives in this area, with a particular focus on developing effective methods and efficient drug delivery systems. This review aims to offer insights into the opportunities and challenges associated with the use of natural polymers in biomedicine and to provide a roadmap for future research in this field.

Advancing diabetes treatment: the role of mesenchymal stem cells in islet transplantation

Diabetes mellitus, a prevalent global health challenge, significantly impacts societal and economic well-being. Islet transplantation is increasingly recognized as a viable treatment for type 1 diabetes that aims to restore endogenous insulin production and mitigate complications associated with exogenous insulin dependence. We review the role of mesenchymal stem cells (MSCs) in enhancing the efficacy of islet transplantation. MSCs, characterized by their immunomodulatory properties and differentiation potential, are increasingly seen as valuable in enhancing islet graft survival, reducing immune-mediated rejection, and supporting angiogenesis and tissue repair. The utilization of MSC-derived extracellular vesicles further exemplifies innovative approaches to improve transplantation outcomes. However, challenges such as MSC heterogeneity and the optimization of therapeutic applications persist. Advanced methodologies, including artificial intelligence (AI) and single-cell RNA sequencing (scRNA-seq), are highlighted as potential technologies for addressing these challenges, potentially steering MSC therapy toward more effective, personalized treatment modalities for diabetes. This review revealed that MSCs are important for advancing diabetes treatment strategies, particularly through islet transplantation. This highlights the importance of MSCs in the field of regenerative medicine, acknowledging both their potential and the challenges that must be navigated to fully realize their therapeutic promise.

The Tissue Engineering Revolution: From Bench Research to Clinical Reality

At its core, tissue engineering involves the use of a scaffold for the formation of new viable tissue for medical purposes [...].

A Combined Computational and Experimental Analysis of PLA and PCL Hybrid Nanocomposites 3D Printed Scaffolds for Bone Regeneration

A combined computational and experimental study of 3D-printed scaffolds made from hybrid nanocomposite materials for potential applications in bone tissue engineering is presented. Polycaprolactone (PCL) and polylactic acid (PLA), enhanced with chitosan (CS) and multiwalled carbon nanotubes (MWCNTs), were investigated in respect of their mechanical characteristics and responses in fluidic environments. A novel scaffold geometry was designed, considering the requirements of cellular proliferation and mechanical properties. Specimens with the same dimensions and porosity of 45% were studied to fully describe and understand the yielding behavior. Mechanical testing indicated higher apparent moduli in the PLA-based scaffolds, while compressive strength decreased with CS/MWCNTs reinforcement due to nanoscale challenges in 3D printing. Mechanical modeling revealed lower stresses in the PLA scaffolds, attributed to the molecular mass of the filler. Despite modeling challenges, adjustments improved simulation accuracy, aligning well with experimental values. Material and reinforcement choices significantly influenced responses to mechanical loads, emphasizing optimal structural robustness. Computational fluid dynamics emphasized the significance of scaffold permeability and wall shear stress in influencing bone tissue growth. For an inlet velocity of 0.1 mm/s, the permeability value was estimated at 4.41 × 10-9 m2, which is in the acceptable range close to human natural bone permeability. The average wall shear stress (WSS) value that indicates the mechanical stimuli produced by cells was calculated to be 2.48 mPa, which is within the range of the reported literature values for promoting a higher proliferation rate and improving osteogenic differentiation. Overall, a holistic approach was utilized to achieve a delicate balance between structural robustness and optimal fluidic conditions, in order to enhance the overall performance of scaffolds in tissue engineering applications.

Involvement of the Expression of G Protein-Coupled Receptors in Schizophrenia

The expression of GPCRs has been associated with schizophrenia, and their expression may induce morphological changes in brain regions responsible for schizophrenia and disease-specific behavioral changes. The articles included in this review were selected using keywords and databases of scientific research websites. The expressions of GPRs have different involvements in schizophrenia, some increase the risk while others provide protection, and they may also be potential targets for new treatments. Proper evaluation of these factors is essential to have a better therapeutic response with a lower rate of chronicity and thus improve the long-term prognosis.

Treatment of type 2 diabetes mellitus with stem cells and antidiabetic drugs: a dualistic and future-focused approach

Type 2 Diabetes Mellitus (T2DM) accounts for more than 90% of total diabetes mellitus cases all over the world. Obesity and lack of balance between energy intake and energy expenditure are closely linked to T2DM. Initial pharmaceutical treatment and lifestyle interventions can at times lead to remission but usually help alleviate it to a certain extent and the condition remains, thus, recurrent with the patient being permanently pharmaco-dependent. Mesenchymal stromal cells (MSCs) are multipotent, self-renewing cells with the ability to secrete a variety of biological factors that can help restore and repair injured tissues. MSC-derived exosomes possess these properties of the original stem cells and are potentially able to confer superior effects due to advanced cell-to-cell signaling and the presence of stem cell-specific miRNAs. On the other hand, the repository of antidiabetic agents is constantly updated with novel T2DM disease-modifying drugs, with higher efficacy and increasingly convenient delivery protocols. Delving deeply, this review details the latest progress and ongoing studies related to the amalgamation of stem cells and antidiabetic drugs, establishing how this harmonized approach can exert superior effects in the management and potential reversal of T2DM.

From Basic Science to Clinical Perfection: What Defines the Orthopedic Biocompatible Implant?

The general improvement in life expectancy and standard of living makes it easier for patients to get access to routine medical exams and is anticipated to increase the prevalence of several degenerative joint illnesses. In addition, it is anticipated that their incidence will increase both nationally and internationally, which will raise the demand for novel and long-lasting implantable devices in the field of orthopedics. The current review’s goals are to define what constitutes a biocompatible orthopedic implant in terms of in vitro biocompatibility testing and to clarify important concepts and definitions that are already in use. The demand for materials and implants made of various tissues is now increasing, and the ongoing advancement of in vitro cell culture studies is a reliable practical tool for examining the biocompatibility of potential implantable materials. In vitro biocompatibility research has been reduced and, in most cases, diminished to laboratory studies that no longer or drastically reduce animal sacrifice as a response to the well-known three “Rs” (“reduction”, “refinement”, and “replacement”) introduced to literature by English academics in the 1960s. As technology advances at an astounding rate, a new generation of gene-activating biomaterials tailored for specific people and disease conditions might emerge in the near future.

Organoids and Their Research Progress in Plastic and Reconstructive Surgery

Organoids are 3D structures generated from stem cells. Their functions and physiological characteristics are similar to those of normal organs. They are used in disease mechanism research, new drug development, organ transplantation and other fields. In recent years, the application of 3D materials in plastic surgery for repairing injuries, filling, tissue reconstruction and regeneration has also been investigated. The PubMed/MEDLINE database was queried to search for animal and human studies published through July of 2022 with search terms related to Organoids, Plastic Surgery, Pluripotent Stem Cells, Bioscaffold, Skin Reconstruction, Bone and Cartilage Regeneration. This review presents stem cells, scaffold materials and methods for the construction of organoids for plastic surgery, and it summarizes their research progress in plastic surgery in recent years.Level of Evidence III This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Effects of Laser Application on Alveolar Bone Mesenchymal Stem Cells and Osteoblasts: An In Vitro Study

Mesenchymal stem cells isolated from the bone marrow have a great differentiation potential, being able to produce many cell lines, including osteoblasts. Osteoblasts have an important role in bone remodeling by actively participating in the maturation and mineralization of the extracellular matrix. The aim of this study was to determine the effect of laser application on the viability and proliferation of osteoblasts. Methods: Alveolar bone was harvested from 8 patients and placed into a culture medium to induce proliferation of mesenchymal stem cells. These were differentiated into osteoblasts in special conditions. The cells from each patient were split into two groups, one was treated using a 980 nm laser (1W output power, pulsed mode, 20 s, 50 mm distance) (laser “+”) and the other one did not receive laser stimulation (laser “-”). Results: Using the confocal microscope, we determined that the cells from the laser “+” group were more active when compared to the laser “-” group. The number of cells in the laser “+” group was significantly greater compared to the laser “-” group as the ImageJ-NIH software showed (p = 0.0072). Conclusions: Laser application increases the proliferation rate of osteoblasts and intensifies their cellular activity.