Variation of Goliathus orientalis (Moser, 1909) Elytra Nanostructurations and Their Impact on Wettability

Investigation on dung beetle's (Heliocopris Hope, 1838) chitosan valorisation for hydrogel 3D printing

Biopolymers and their derivatives are materials with increasing interest for industry and especially for sustainable engineering development. Among such kind of materials, carbohydrate polymer like highly deacetylated chitin (chitosan) is widely used for a wide range of applications, including material and biomedical developments. The majority of industrially produced chitosan is based on chitin extracted from crustacean exoskeleton. However, with increase of interest on this material, chitosan's production will rapidly become insufficient and other species should be investigated as new sources of chitosan. In the present work, we focus on the preparation of chitosan from giant dung beetles (Genus Heliocopris, Hope, 1838). This genus was chosen to show the possibility to take animals that develop and leave near dejection and valuate them for material applications. This work includes all the chitosan extraction procedures, chitosan characterisation IR, SEM, NMR, ash content, and deacetylation degree. Finally, the prepared carbohydrate polymer is used to form hydrogel. The prepared gel has been characterised and used for 3D printing, to show the compatibility of extracted chitosan with biomaterial application.

Investigation on Mecynorhina torquata Drury, 1782 (Coleoptera, Cetoniidae, Goliathini) cuticle: Surface properties, chitin and chitosan extraction

Naturally derived polymers, such as cellulose or chitin, are materials with increasing interest for a sustainable future. Considering the pollution associated with plastics recycling, natural and fully biocompatible materials like cellulose and chitin are becoming increasingly more relevant for sustainable engineering applications. Chitin and highly deacetylated chitin (chitosan) are already implemented in a wide range of materials applications, especially in biomedical fields. One interesting aspect of chitin is that the majority of industrially produced chitin is extracted from shrimp exoskeleton. However, other arthropods can also be investigated as a source of chitin. In this work, we focus on the extraction of chitin and preparation of chitosan from a beetle specie: Mecynorhina torquata. This includes characterization of the native Mecynorhina torquata surfaces and all intermediate surfaces throughout the chitosan extraction procedure. The final product, prepared chitosan, is also characterized using IR, SEM, ash content, and deacetylation degree. In addition, spectacular iridescent surfaces of Mecynorhina torquata are highlighted at the intermediate steps during chitin extraction. Finally, as proof of concept, the isolated chitosan is used to form hydrogel.

Inspection of Biomimicry Approaches as an Alternative to Address Climate-Related Energy Building Challenges: A Framework for Application in Panama

In the Panama context, energy consumption in the building sector is mostly related to the conditioning of indoor spaces for cooling and lighting. Different nature strategies can be mimic to strongly impact these two aspects in the building sector, such as the ones presented here. A comprehensive analysis regarding literature related to biomimicry-based approaches destined to improve buildings designs is presented here. This analysis is driven by the increasing energy regulations demands to meet future local goals and to propose a framework for applications in Panama. Such biomimicry-based approaches have been further analyzed and evaluated to propose the incorporation of organism-based design for three of the most climate types found in Panama. Consequently, a SWOT analysis helped realized the potential that biomimicry-based approaches might have in improving the odds of in meeting the local and global regulations demands. The need for multidisciplinary collaboration to accomplish biomimicry-based-designed buildings, brings an increment in the competitivity regarding more trained human-assets, widening the standard-construction-sector thinking. Finally, the analysis presented here can serve as the foundation for further technical assessment, via numerical and experimental means.

Chitosan Extraction from Goliathus orientalis Moser, 1909: Characterization and Comparison with Commercially Available Chitosan

Chitosan is a polymer obtained by deacetylation of chitin, and chitin is one of the major components of the arthropod cuticle. Chitin and chitosan are both polysaccharides and are considered to be an interesting class of biosourced materials. This is evident as chitosan has already demonstrated utility in various applications in both industrial and biomedical domains. In the present work, we study the possibility to extract chitin and prepare chitosan from the Goliath beetle Goliathus orientalis Moser. The presented work includes description of this process and observation of the macroscopic and microscopic variations that occur in the specimen during the treatment. The prepared chitosan is characterized and compared with commercially available chitosan using infrared and thermogravimetric analysis. The deacetylation degree of prepared chitosan is also evaluated and compared with commercially available shrimp chitosan.

Passive water harvesting by desert plants and animals: lessons from nature

Fresh water sustains human life and is vital for human health. For some of the poorest countries, 1 in 10 people do not have access to safe and easily accessible water sources. Water consumption by man continues to grow with an increasing population. The current supply of fresh water needs to be supplemented to meet future needs. Living nature provides many lessons for water harvesting. It has evolved species which can survive in the most arid regions of the world by passively collecting water from fog and condensation of water vapour in the night. Before the collected water evaporates, species have mechanisms to transport water for storage or consumption. These species possess unique chemistry and structures on or within the body for collection and transport of water. Among the high diversity of species surviving in deserts, only a handful of species have been studied. Based on lessons from nature, bioinspired water harvesters can be designed. In this paper, an overview of various desert plants and animals is given and known water harvesting mechanisms of some are presented. This article is part of the theme issue 'Bioinspired materials and surfaces for green science and technology (part 3)'.

Cupric Oxide Nanostructures from Plasma Surface Modification of Copper

Taking inspiration from the hydrophilic and superhydrophilic properties observed from the nanostructures present on the leaves of plants such as Alocasia odora, Calathea zebrina, and Ruelia devosiana, we were able to synthesize cupric oxide (CuO) nanostructures from the plasma surface modification of copper (Cu) that exhibits hydrophilic and superhydrophilic properties. The Cu sheets were exposed to oxygen plasma produced from the P300 plasma device (Alliance Concept, Cran-Gevrier, France) at varying power, irradiation times, gas flow rates, and pulsing duty cycles. The untreated and plasma-treated Cu sheets were characterized by contact angle measurements, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) to determine the changes in the surface of Cu before and after plasma treatment. Results showed that plasma-treated Cu sheets exhibited enhanced wetting properties compared to untreated Cu. We attributed the decrease in the measured water contact angles after plasma treatment to increased surface roughness, formation of CuO nanostructures, and transformation of Cu to either CuO₂ or Cu₂O₃. The presence of the CuO nanostructures on the surface of Cu is very useful in terms of its possible applications, such as: (1) in antimicrobial and anti-fouling tubing; (2) in the improvement of heat dissipation devices, such as microfluidic cooling systems and heat pipes; and (3) as an additional protection to Cu from further corrosion. This study also shows the possible mechanisms on how CuO, CuO₂, and Cu₂O₃ were formed from Cu based on the varying the plasma parameters.

Micro- and nanoscopic observations of sexual dimorphisms in Mecynorhina polyphemus confluens (Kraatz, 1890) (Coleoptera, Cetoniidae, Goliathini) and consequences for surface wettability

In the animal kingdom, macroscopic variations in size, color, and even hairiness are frequently observed between male and female, making the sex of various species easy to discern. In the case of insects, similar variances also exist. While direct observation is a quick and efficient way to differentiate between sexes, there are also variations which are unseen to the naked eye and occur on a micro- or nanoscopic scale. Sometimes, these micro/nanoscopic variations can lead to significant variations in surface properties as a function of sex. Such is the case for the Mecynorhina polyphemus confluens (Kraatz, 1890). In this work, we characterize these micro- and nanoscale differences, and describe their impact on the surface properties (e.g. wettability). It is found that water interacts quite differently with the surface of the cuticle of Mecynorhina polyphenus confluens, depending on the specimen sex. On a female, water spreads readily across the elytra indicating hydrophilic behavior. However, on the surface of the male elytra, strong hydrophobicity is observed. Microscopic observations reveal differences in microscale surface morphology across the male and female cuticle. These observations contribute to a better, global understanding of the wettability behavior observed on M. polyphemus confluens.