Newly Developed System for Acetamiprid Residue Screening in the Lettuce Samples Based on a Bioelectric Cell Biosensor

A Novel Application of B.EL.D™ Technology: Biosensor-Based Detection of Salmonella spp. in Food

The prevalence of foodborne diseases is continuously increasing, causing numerous hospitalizations and deaths, as well as money loss in the agri-food sector and food supply chain worldwide. The standard analyses currently used for bacteria detection have significant limitations with the most important being their long procedural time that can be crucial for foodborne outbreaks. In this study, a biosensor system able to perform robust and accurate detection of Salmonella spp. in meat products was developed. To achieve this, a portable device developed by EMBIO Diagnostics called B.EL.DTM (Bio Electric Diagnostics) and cell-based biosensor technology (BERA) were used. Results indicated that the new method could detect the pathogen within 24 h after a 3-min analysis and discriminate samples with and without Salmonella with high accuracy. Achieving an accuracy of 86.1% and a detection limit (LOD) of 1 log CFU g-1, this innovative technology enables rapid and sensitive identification of Salmonella spp. in meat and meat products, making it an excellent tool for pathogen screening.

Development of a Portable Cell-Based Biosensor for the Ultra-Rapid Screening for Boscalid Residues in Lettuce

Fungal plant pathogens have posed a significant threat to crop production. However, the large-scale application of pesticides is associated with possible risks for human health and the environment. Boscalid is a widely used fungicide, consistently implemented for the management of significant plant pathogens. Conventionally, the detection and determination of boscalid residues is based on chromatographic separations. In the present study, a Bioelectric Recognition Assay (BERA)-based experimental approach combined with MIME technology was used, where changes in the electric properties of the membrane-engineering cells with anti-boscalid antibodies were recorded in response to the presence of boscalid at different concentrations based on the maximum residue level (MRL) for lettuce. The membrane-engineering Vero cells with 0.5 μg/mL of antibody in their surface were selected as the best cell line in combination with the lowest antibody concentration. Furthermore, the biosensor was tested against another fungicide in order to prove its selectivity. Finally, the BERA cell-based biosensor was able to detect the boscalid residue, below and above the MRL, in spiked lettuce leaf extracts in an entirely distinct and reproducible manner. This study indicates that the BERA-based biosensor, after further development and optimization, could be used for the routine, high-throughput detection of boscalid residue in lettuce, and not only that.

Recent advances in electrochemical cell-based biosensors for food analysis: Strategies for sensor construction

Owing to their advantages such as great specificity, sensitivity, rapidity, and possibility of noninvasive and real-time monitoring, electrochemical cell-based biosensors (ECBBs) have been a powerful tool for food analysis encompassing the areas of nutrition, flavor, and safety. Notably, the distinctive biological relevance of ECBBs enables them to mimic physiological environments and reflect cellular behaviors, leading to valuable insights into the biological function of target components in food. Compared with previous reviews, this review fills the current gap in the narrative of ECBB construction strategies. The review commences by providing an overview of the materials and configuration of ECBBs, including cell types, cell immobilization strategies, electrode modification materials, and electrochemical sensing types. Subsequently, a detailed discussion is presented on the fabrication strategies of ECBBs in food analysis applications, which are categorized based on distinct signal sources. Lastly, we summarize the merits, drawbacks, and application scope of these diverse strategies, and discuss the current challenges and future perspectives of ECBBs. Consequently, this review provides guidance for the design of ECBBs with specific functions and promotes the application of ECBBs in food analysis.

In Silico Investigation of Selected Pesticides and Their Determination in Agricultural Products Using QuEChERS Methodology and HPLC-DAD

In this study, we considered some pesticides as active substances within formulations for the protection of plant-based food in the Republic of Serbia in silico, because these pesticides have not often been investigated in this way previously, and in an analytical way, because there are not very many available fast, cheap, and easy methods for their determination in real agricultural samples. Seven pesticides were detected in selected agricultural products (tomatoes, cucumbers, peppers, and grapes) using the QuEChERS methodology and HPLC-DAD. Standard curves for the investigated pesticides (chlorantraniliprole, methomyl, metalaxyl, thiacloprid, acetamiprid, emamectin benzoate, and cymoxanil) show good linearity, with R² values from 0.9785 to 0.9996. The HPLC-DAD method is fast, and these pesticides can be determined in real spiked samples in less than 15 min. We further characterized the pesticides we found in food based on physicochemical properties and molecular descriptors to predict the absorption, distribution, metabolism, elimination, and toxicity (ADMET) of the compounds. We summarized the data supporting their effects on humans using various computational tools to determine their potential adverse effects. The results of our prediction study show that all of the selected pesticides considered in this study have good oral bioavailability, and those with high toxicity, therefore, could be harmful to human health. Chlorantraniliprole was shown in a molecular docking study as a good starting point for a new Alzheimer's disease drug candidate.

Angiotensin-Converting Enzyme 2 (ACE2) As a Novel Biorecognition Element in A Cell-Based Biosensor for the Ultra-Rapid, Ultra-Sensitive Detection of the SARS-CoV-2 S1 Spike Protein Antigen

Antigen screening for the SARS-CoV-2 S1 spike protein is among the most promising tools for the mass monitoring of asymptomatic carriers of the virus, especially in limited resource environments. Herewith, we report on the possible use of the angiotensin-converting enzyme 2 (ACE2), the natural receptor and entry point of the virus, as a biorecognition element for the detection of the S1 antigen combined with an established bioelectric biosensor based on membrane-engineered cells. The working principle of our approach is based on the measurable change of the electric potential of membrane-engineered mammalian cells bearing ACE2 after attachment of the respective viral protein. We demonstrate that sensitive and selective detection of the S1 antigen is feasible in just three min, with a limit of detection of 20 fg/mL. In a preliminary clinical application, positive patient-derived samples were identified with a 87.9% score compared to RT-PCR. No cross-reactivity was observed against a wide range of nucleocapsid protein concentrations. The novel biosensor is embedded in a commercially ready-to-use testing platform, complete with the consumable immobilized cell–electrode interface and a portable read-out device operable through smartphone or tablet. In addition, the possible application of the system for the high throughput screening of potential pharmacological inhibitors of the ACE2 receptor-S1 RBD interaction is discussed.

Clinical Application of the Novel Cell-Based Biosensor for the Ultra-Rapid Detection of the SARS-CoV-2 S1 Spike Protein Antigen: A Practical Approach

The availability of antigen tests for SARS-CoV-2 represents a major step for the mass surveillance of the incidence of infection, especially regarding COVID-19 asymptomatic and/or early-stage patients. Recently, we reported the development of a Bioelectric Recognition Assay-based biosensor able to detect the SARS-CoV-2 S1 spike protein expressed on the surface of the virus in just three minutes, with high sensitivity and selectivity. The working principle was established by measuring the change of the electric potential of membrane-engineered mammalian cells bearing the human chimeric spike S1 antibody after attachment of the respective viral protein. In the present study, we applied the novel biosensor to patient-derived nasopharyngeal samples in a clinical set-up, with absolutely no sample pretreatment. More importantly, membrane-engineered cells were pre-immobilized in a proprietary biomatrix, thus enabling their long-term preservation prior to use as well as significantly increasing their ease-of-handle as test consumables. The plug-and-apply novel biosensor was able to detect the virus in positive samples with a 92.8% success rate compared to RT-PCR. No false negative results were recorded. These findings demonstrate the potential applicability of the biosensor for the early, routine mass screening of SARS-CoV-2 on a scale not yet realized.

Development and performance characteristics evaluation of a new Bioelectric Recognition Assay (BERA) method for rapid Sars-CoV-2 detection in clinical samples

Introduction

As the second wave of COVID-19 pandemic is in progress the development of fast and cost-effective approaches for diagnosis is essential. The aim of the present study was to develop and evaluate the performance characteristics of a new Bioelectric Recognition Assay (BERA) regarding Sars-CoV-2 detection in clinical samples and its potential to be used as a point of care test.

Materials and methods

All tests were performed using a custom portable hardware device developed by EMBIO DIAGNOSTICS (EMBIO DIAGNOSTICS Ltd, Cyprus). 110 positive and 136 negative samples tested by RT-PCR were used in order to define the lower limit of detection (L.O.D.) of the system, as well as the sensitivity and the specificity of the method.

Results

The system was able to detect a viral concentration of 4 genome copies/μL. The method displayed total sensitivity of 92.7 % (95 %CI: 86.2–96.8) and 97.8 % specificity (95 %CI: 93.7–99.5). When samples were grouped according to the recorded Ct values the BERA biosensor displayed 100.00 % sensitivity (95 %CI: 84.6–100.0) for Ct values <20−30. For the aforementioned Ct values the Positive Predictive Value (PPV) of the method was estimated at 31.4 % for COVID-19 prevalence of 1% and at 70.5 % for 5% prevalence. At the same time the Negative Predictive Value (NPV) of the BERA biosensor was at 100.0 % for both prevalence rates.

Conclusions

EMBIO DIAGNOSTICS BERA for the detection of SARS-CoV-2 infection has the potential to allow rapid and cost-effective detection and subsequent isolation of confirmed cases, and therefore reduce household and community transmissions.

Newly Developed System for the Robust Detection of Listeria monocytogenes Based on a Bioelectric Cell Biosensor

Human food-borne diseases caused by pathogenic bacteria have been significantly increased in the last few decades causing numerous deaths worldwide. The standard analyses used for their detection have significant limitations regarding cost, special facilities and equipment, highly trained staff, and a long procedural time that can be crucial for foodborne pathogens with high hospitalization and mortality rates, such as Listeria monocytogenes. This study aimed to develop a biosensor that could detect L. monocytogenes rapidly and robustly. For this purpose, a cell-based biosensor technology based on the Bioelectric Recognition Assay (BERA) and a portable device developed by EMBIO Diagnostics, called B.EL.D (Bio Electric Diagnostics), were used. Membrane engineering was performed by electroinsertion of Listeria monocytogenes homologous antibodies into the membrane of African green monkey kidney (Vero) cells. The newly developed biosensor was able to detect the pathogen's presence rapidly (3 min) at concentrations as low as 102 CFU mL-1, demonstrating a higher sensitivity than most existing biosensor-based methods. In addition, lack of cross-reactivity with other Listeria species, as well as with Escherichia coli, was shown, thus, indicating biosensor's significant specificity against L. monocytogenes.

Development of a Portable, Ultra-Rapid and Ultra-Sensitive Cell-Based Biosensor for the Direct Detection of the SARS-CoV-2 S1 Spike Protein Antigen

One of the key challenges of the recent COVID-19 pandemic is the ability to accurately estimate the number of infected individuals, particularly asymptomatic and/or early-stage patients. We herewith report the proof-of-concept development of a biosensor able to detect the SARS-CoV-2 S1 spike protein expressed on the surface of the virus. The biosensor is based on membrane-engineered mammalian cells bearing the human chimeric spike S1 antibody. We demonstrate that the attachment of the protein to the membrane-bound antibodies resulted in a selective and considerable change in the cellular bioelectric properties measured by means of a Bioelectric Recognition Assay. The novel biosensor provided results in an ultra-rapid manner (3 min), with a detection limit of 1 fg/mL and a semi-linear range of response between 10 fg and 1 μg/mL. In addition, no cross-reactivity was observed against the SARS-CoV-2 nucleocapsid protein. Furthermore, the biosensor was configured as a ready-to-use platform, including a portable read-out device operated via smartphone/tablet. In this way, we demonstrate that the novel biosensor can be potentially applied for the mass screening of SARS-CoV-2 surface antigens without prior sample processing, therefore offering a possible solution for the timely monitoring and eventual control of the global coronavirus pandemic.