Strategies for Enhancing the Sensitivity of Electrochemiluminescence Biosensors

A triple read-out visible biosensing platform based on multifunctional nanozyme and bipolar electrode for multi-mode detection and imaging of CEA

In this paper, a proposal of closed bipolar electrode (BPE) and nanozyme based multi-mode biosensing platform is first presented. As a novel integrated chip, multi-mode-BPE (MMBPE) combines enzyme-linked immunoassay (ELISA), electrochemiluminescence (ECL), ECL imaging and light emitting diode (LED) imaging, enabling highly sensitive triple read-out visible detection of cancer embryonic antigen (CEA). The ECL probe Ab2@Au@Co3O4/CoFe2O4 hollow nanocubes (HNCs) with excellent peroxidase (POD) activity is introduced into the BPE cathode through immune adsorption. The Au@Co3O4/CoFe2O4 HNCs can increase the rate of hydrogen peroxide oxidation of TMB, thus promoting the reaction, and can be used for ELISA detection of CEA at different concentrations. The modification of the BPE sensing interface and reporting interface involved the introduction of the luminescent reagent Ru(bpy)32+ to the BPE anode. The decomposition rate of H2O2 increased under the catalytic action of Au@Co3O4/CoFe2O4 HNCs nanozyme, leading to an accelerated electron transfer rate in the MMBPE system and an enhanced ECL signal from Ru(bpy)32+. The LED imaging technology further provides a convenient and visible approach for CEA imaging in which no additional chemicals are needed. The integration of nanoenzymes as the catalytic core in MMBPE system provides impetus, while the combination of nanozymes with BPE expands the application of nanoenzymes in the field of biological analysis. The integration of intelligent chips with multiple modes of detection shows portable, miniaturized, and integrated excellent properties which meets the requirements of modern detection devices and thus offers a flexible approach for determination of nucleic acids, proteins, and cells.

Recent Trends and Innovations in Bead-Based Biosensors for Cancer Detection

Demand is strong for sensitive, reliable, and cost-effective diagnostic tools for cancer detection. Accordingly, bead-based biosensors have emerged in recent years as promising diagnostic platforms based on wide-ranging cancer biomarkers owing to the versatility, high sensitivity, and flexibility to perform the multiplexing of beads. This comprehensive review highlights recent trends and innovations in the development of bead-based biosensors for cancer-biomarker detection. We introduce various types of bead-based biosensors such as optical, electrochemical, and magnetic biosensors, along with their respective advantages and limitations. Moreover, the review summarizes the latest advancements, including fabrication techniques, signal-amplification strategies, and integration with microfluidics and nanotechnology. Additionally, the challenges and future perspectives in the field of bead-based biosensors for cancer-biomarker detection are discussed. Understanding these innovations in bead-based biosensors can greatly contribute to improvements in cancer diagnostics, thereby facilitating early detection and personalized treatments.

Optimization and miniaturization of SE-ECL for potential-resolved, multi-color, multi-analyte detection

Electrochemiluminescence (ECL) is a bioanalytical technique with numerous advantages, including the potential for high temporal and spatial resolution, a high signal-to-noise ratio, a broad dynamic range, and rapid measurement capabilities. To reduce the complexity of a multi-electrode approach, we use a single-electrode electrochemiluminescence (SE-ECL) configuration to achieve the simultaneous emission and detection of multiple colors for applications that require multiplexed detection of several analytes. This method exploits intrinsic differences in the electric potential applied along single electrodes built into electrochemical cells, enabling the achievement of distinct colors through selective excitation of ECL luminophores. We present results on the optimization of SE-ECL intensity for different channel lengths and widths, with sum intensities being 5 times larger for 6 cm vs. 2 cm channels and linearly increasing with the width of the channels. Furthermore, we demonstrated for the first time that applying Alternating Current (AC) voltage within the single electrode setup for driving the ECL reactions has a dramatic effect on the emitted light intensity, with square waveforms resulting in higher intensities vs sine waveforms. Additionally, multiplexed multicolor SE-ECL on a 6.5 mm × 3.6 mm CMOS semiconductor image sensor was demonstrated for the first time, with the ability to simultaneously distinguish four different colors, leading to the ability to measure multiple analytes.

Electrogenerated Chemiluminescence Biosensor for Quantization of Matrix Metalloproteinase-3 in Serum via Target-Induced Cleavage of Oligopeptide

A highly sensitive and selective electrogenerated chemiluminescence (ECL) biosensor was developed for the determination of matrix metalloproteinase 3 (MMP-3) in serum via the target-induced cleavage of an oligopeptide. One ECL probe (named as Ir-peptide) was synthesized by covalently linking a new cyclometalated iridium(III) complex ([(3-pba)2Ir(bpy-COOH)](PF6)) (3-pba = 3-(2-pyridyl) benzaldehyde, bpy-COOH = 4'-methyl-2,2'-bipyridine-4-carboxylic acid) with an oligopeptide (CGVPLSLTMGKGGK). An ECL biosensor was fabricated by firstly casting Nafion and gold nanoparticles (AuNPs) on a glassy carbon electrode and then self-assembling both of the ECL probes, 6-mercapto-1-hexanol and zwitterionic peptide, on the electrode surface, from which the AuNPs could be used to amplify the ECL signal and Ir-peptide could serve as an ECL probe to detect the MMP-3. Thanks to the MMP-3-induced cleavage of the oligopeptide contributing to the decrease in ECL intensity and the amplification of the ECL signal using AuNPs, the ECL biosensor could selectively and sensitively quantify MMP-3 in the concentration range of 10-150 ng·mL-1 and with both a limit of quantification (26.7 ng·mL-1) and a limit of detection (8.0 ng·mL-1) via one-step recognition. In addition, the developed ECL biosensor showed good performance in the quantization of MMP-3 in serum samples, with a recovery of 92.6% ± 2.8%-105.6% ± 5.0%. An increased level of MMP-3 was found in the serum of rheumatoid arthritis patients compared with that of healthy people. This work provides a sensitive and selective biosensing method for the detection of MMP-3 in human serum, which is promising in the identification of patients with rheumatoid arthritis.

Nanomaterial-based methods for sepsis management

Sepsis is a serious disease caused by an impaired host immune response to infection, resulting in organ dysfunction, tissue damage and is responsible for high in-hospital mortality (approximately 20%). Recently, WHO documented sepsis as a global health priority. Nevertheless, there is still no effective and specific therapy for clinically detecting sepsis. Nanomaterial-based approaches have appeared as promising tools for identifying bacterial infections. In this review, recent biosensors are introduced and summarized as nanomaterial-based platforms for sepsis management and severe complications. Biosensors can be used as tools for the diagnosis and treatment of sepsis and as nanocarriers for drug delivery. In general, diagnostic methods for sepsis-associated bacteria, biosensors developed for this purpose are presented in detail, and their strengths and weaknesses are discussed. In other words, readers of this article will gain a comprehensive understanding of biosensors and their applications in sepsis management.

Free PCR virus detection via few-layer bismuthene and tetrahedral DNA nanostructured assemblies

In this work we describe a highly sensitive method based on a biocatalyzed electrochemiluminescence approach. The system combines, for the first time, the use of few-layer bismuthene (FLB) as a platform for the oriented immobilization of tetrahedral DNA nanostructures (TDNs) specifically designed and synthetized to detect a specific SARS-CoV-2 gene sequence. In one of its vertices, these TDNs contain a DNA capture probe of the open reading frame 1 ab (ORF1ab) of the virus, available for the biorecognition of the target DNA/RNA. At the other three vertices, there are thiol groups that enable the stable anchoring/binding to the FLB surface. This novel geometry/approach enables not only the binding of the TDNs to surfaces, but also the orientation of the capture probe in a direction normal to the bismuthine surface so that it is readily accessible for binding/recognition of the specific SARS-CoV-2 sequence. The analytical signal is based on the anodic electrochemiluminescence (ECL) intensity of luminol which, in turn, arises as a result of the reaction with H2O2, generated by the enzymatic reaction of glucose oxidation, catalyzed by the biocatalytic label avidin-glucose oxidase conjugate (Av-GOx), which acts as co-reactant in the electrochemiluminescent reaction. The method exhibits a limit of detection (LOD) of 4.31 aM and a wide linear range from 14.4 aM to 1.00 μM, and its applicability was confirmed by detecting SARS-CoV-2 in nasopharyngeal samples from COVID-19 patients without the need of any amplification process.

Antioxidant Cascade Modulated Electrochemiluminescence by a Biomimetic Metal-Organic Framework with Dual Enzymatic Activity for Disease Marker Immunoassays

High-performance electrochemiluminescence is a significant approach for the examination of disease biomarkers, and the utilization of innovative electrochemiluminescence detection systems represents a viable strategy to enhance the efficacy of ECL analysis. In this work, the biomimetic engineering metal-organic framework (MOF-818) has realized the ultrasensitive ECL immunoassay of disease markers based on the guidance of the free radical scavenging strategy provided by the antioxidant cascade. Initially, we synthesized a hydrogen-bonded organic framework (HOF) consisting of luminol and three active ligands based on simple room-temperature self-assembly. The luminol-HOF (L-HOF) showed more stable and brighter ECL luminescence activity than the monomer due to the nano-confinement enhancement of the coordinated luminol units. Subsequently, MOF-818 with biomimetic superoxide dismutase (SOD) and catalase (CAT) activities were recruited for the first time as quenching agents for sandwich immunoassay mode. The enzyme activity leads to the reverse transformation of superoxide anion radicals (O2-) and further antioxidant decomposition, decreasing in the responsiveness of luminol ECL signals. Using carcinoembryonic antigen (CEA) as an analytical model, a detection limit of 0.457 pg/mL was obtained within a detection range of 0.001-50 ng/mL. We believe that this novel sandwich sensing model based on enzyme activity provides a meaningful potential tool for precise detection, expanding the broader application of nanoenzymes in analysis.

Electrochemiluminescent CdS Quantum Dots Biosensor for Cancer Mutation Detection at Different Positions on Linear DNA Analytes

PCR-based techniques routinely employed for the detection of mutated linear DNA molecules, including circulating tumor DNA (ctDNA), require large nucleotide sections on both sides of the mutation for primer annealing. This means that DNA fragments with a mutation positioned closer to the extremities are unlikely to be detected. Thus, sensors capable of recognizing linear DNA with characteristic mutations closer to the ends would be advantageous over the state-of-the-art approaches. Here, an electrochemiluminescence-resonance energy transfer (ECL-RET) biosensor comprising capped CdS quantum dots and hairpin DNA probes labeled with Au nanoparticles was developed for the detection of epidermal growth factor receptor (EGFR) ctDNA carrying the critical T790M lung cancer mutation. The ECL-RET system detected different DNA molecules including single-stranded 18-nucleotides (nt) and 40-nt as well as double-stranded 100-nt with the single nucleotide polymorphism (SNP) coding for T790M located either in the middle or only 7 nt from one end. For all target DNA, the sensor's limits of detection (LODs) were in the aM range, with excellent selectivity. It was the case of 100-nt target linear ctDNA fragments with LODs of 8.1 and 3.4 aM when the EGFR T790M SNP was either in the middle or at the end, respectively. These results show that ECL-RET systems can sense mutations in DNA fragments that would remain undetected by standard techniques.

Recent Progress in Biosensors Based on Biorecognition Molecules

Biosensors are considered a popular technology to rapidly detect targets, and are generally composed of biorecognition molecules that specifically capture analytes and signal elements [...].

Microtrap-assisted microfluidic magnetic separation and concentration for ultrasensitive immunoassays of biomarkers

Precise and accurate quantitation of important biomarkers is significant, especially in early-stage diseases diagnosis. To realized effective biosample preparation and trace-level biomarker detection, a microtrap-assisted microfluidic magnetic immunoassays (μMI) method was developed in this work. A microtrap was fabricated inside the straight microchannel of μMI device to help magnetic separation and concentration of immunocomplexes. These immunocomplexes were enriched in microtrap of μMI device to accomplish selective and sensitive biomarker detection. Horseradish peroxidase-labeled magnetic beads were employed to evaluate assay feasibility and microtrap effect on assay sensitivity. The microtrap-assisted μMI was then applied for model biomarkers detection. The limits of detection of μMI were 0.025 pg/mL for monocyte chemoattractant protein-1 (MCP-1) and 0.021 pg/mL for matrix metalloproteinase-9 (MMP-9), which corresponded up to 2014-fold sensitivity improvement compared to their standard microwell enzyme-linked immunosorbent assay (ELISA) results. In addition, the selectivity and reproducibility of microtrap-assisted μMI were confirmed. In clinical serum sample analysis, recoveries of 91.3%-106.7% with relative standard deviations less than 6.1% were obtained for MCP-1 and MMP-9, and method accuracy was verified by commercial ELISA kit. The developed μMI can accomplish ultratrace biomarker detection offering practical tool for laboratorial and clinical research.

Point-of-Care Diagnostic Biosensors to Monitor Anti-SARS-CoV-2 Neutralizing IgG/sIgA Antibodies and Antioxidant Activity in Saliva

Monitoring biomarkers is a great way to assess daily physical condition, and using saliva instead of blood samples is more advantageous as the process is simple and allows individuals to test themselves. In the present study, we analyzed the titers of neutralizing antibodies, IgG and secretory IgA (sIgA), in response to the SARS-CoV-2 vaccine, in saliva. A total of 19 saliva and serum samples were collected over a 10-month period 3 weeks after the first vaccine, 8 months after the second vaccine, and 1 month after the third vaccine. The ranges of antibody concentrations post-vaccination were: serum IgG: 81-15,000 U/mL, salivary IgG: 3.4-330 U/mL, and salivary IgA: 58-870 ng/mL. A sharp increase in salivary IgG levels was observed after the second vaccination. sIgA levels also showed an increasing trend. A correlation with trends in serum IgG levels was observed, indicating the possibility of using saliva to routinely assess vaccine efficacy. The electrochemical immunosensor assay developed in this study based on the gold-linked electrochemical immunoassay, and the antioxidant activity measurement based on luminol electrochemiluminescence (ECL), can be performed using portable devices, which would prove useful for individual-based diagnosis using saliva samples.