Review on Carbon Dot-Based Fluorescent Detection of Biothiols

A series of anthracene-derived dyes for Cu2+-assisted CO sensing and bio-imaging: synthesis, performance, and mechanism

Endogenous CO acts as an important messenger for signal transduction and therapeutic effect in the human body. Fluorescent imaging appears to be a promising method for endogenous CO recognition, but traditional luminescent probes based on Pd-complexes suffered from defects of high cost. In this work, four anthracene-derived dyes having an = N-N = group were synthesized for Cu2+-assisted CO sensing. Their molecular structure, photophysical performance and spectral response to Cu2+ and CO were analyzed in detail. The optimal probe showed good selectivity and quenching effect to Cu2+, with PLQY (photoluminescence quantum yield) decreased from 0.33 to 0.04. The quenching mechanism was found as a static quenching mechanism by forming a non-fluorescent complex with Cu2+ (stoichiometric ratio = 1:1), as revealed by single crystal, EPR (electron paramagnetic resonance), and XPS (X-ray photoelectron spectroscopy) analysis. Such quenching effect could be reversed by CO, showing recovered fluorescence, with PLQY recovered to 0.32 within 328 s. Discussion on cellular endogenous CO imaging was included as well.

Recent advances in fluorescent probes for ATP imaging

Adenosine-5'-triphosphate (ATP) is a critical biological molecule that functions as the primary energy currency within cells. ATP synthesis occurs in the mitochondria, and variations in its concentration can significantly influence mitochondrial and cellular performance. Prior studies have established a link between ATP levels and a variety of diseases, such as cancer, neurodegenerative conditions, ischemia, and hypoglycemia. Consequently, researchers have developed many fluorescent probes for ATP detection, recognizing the importance of monitoring intracellular ATP levels to understand cellular processes. These probes have been effectively utilized for visualizing ATP in living cells and biological samples. In this comprehensive review, we categorize fluorescent sensors developed in the last five years for ATP detection. We base our classification on fluorophores, structure, multi-response channels, and application. We also evaluate the challenges and potential for advancing new generations of fluorescence imaging probes for monitoring ATP in living cells. We hope this summary motivates researchers to design innovative and effective probes tailored to ATP sensing. We foresee imminent progress in the development of highly sophisticated ATP probes.

A difunctional NMR&CD probe for specific detection and enantiomeric recognition of biothiols in complex mixtures

BACKGROUND

Biothiols are important for numerous cellular processes, such as resisting oxidative stress and protecting cell health. Their abnormal levels and molecular configurations have been associated with various diseases. So, establishing an effective and reliable method for the specific detection and enantiomeric discrimination of diverse biothiols is highly meaningful.

RESULTS

We have developed a new NMR and CD probe using 1,4-dinitroimidazole, specifically targeting the thiol group. This probe allows for the specific detection and enantiomeric recognition of biothiols in complex mixtures. We achieved this by identifying the distinguishable 1H NMR signals of 2nd in imidazole-ring of the resulting 4NI-biothiols in the downfield region at 7-8 ppm and newly discovered induced CD signals within 290-430 nm. Using this probe, the limits of detection of Cys, GSH, and Hcy, the recovery rates, and the concentration of GSH extracted from HEK293T cells were determined by measuring the unique downfield 1H NMR signals. Moreover, Cys, GSH, and Hcy can be discriminated simultaneously in complicated samples at a pH range of 2-3.5. Furthermore, this probe can also be utilized to sense chiral thiol-drugs.

SIGNIFICANCE

This method offers a cost-effective and accurate sensing solution for the specific detection of biothiols in complex mixtures, with stereochemical recognition.

A ratiometric fluorescent probe based on a novel fluorophore with high selectivity for imaging cysteine in living cells

As a biothiol, cysteine (Cys) is essential to both physiological and pathological processes and has been associated with many diseases, including neurological disorders, rheumatoid arthritis, and renal dysfunction. Therefore, the development of a high-performance probe for detecting Cys levels can help prevent and diagnose disease. In this study, a ratiometric fluorescent probe based on a novel fluorophore was developed for detecting Cys, and it showed high specificity and a rapid response time toward Cys. This probe demonstrates excellent biocompatibility and has been utilized effectively for the imaging of Cys in living cells.

Construction of a novel fluorescent probe for sensitive determination of glyphosate in food and imaging living cells

Glyphosate is a widely used broad-spectrum herbicide in agriculture and horticulture to control a variety of weeds and undesirable plants. However, the excessive use of glyphosate has raised a number of environmental and human health concerns. It is urgent to develop tools to detect glyphosate. Herein, a novel dual-signal probe CCU-Cu2+ was designed and synthesized on the basis of CCU. CCU exhibited excellent selectivity and great sensitivity for Cu2+ which were based on both fluorescence "turn-off" reaction and comparative color visualisation methods. Due to the strong chelating ability of glyphosate on Cu2+, the CCU-Cu2+ complex was applied to glyphosate detection in practical samples. The experimental results in vitro showed that the CCU-Cu2+ complex was highly selective and rapid, with a low detection limit (1.6 μM), and could be recognised by the naked eye in the detection of glyphosate. Based on the excellent properties of the CCU-Cu2+ complex, we also constructed a smartphone-assisted detection sensing system for glyphosate detection, which has the advantages of precision, sensitivity, and high interference immunity. Moreover, the CCU-Cu2+ complex was also successfully employed for exogenous glyphosate imaging in living cells. These characteristics demonstrated that CCU-Cu2+ holds significant potential for detection and imaging of glyphosate in bio-systems.

Sensing Utilities of Cesium Lead Halide Perovskites and Composites: A Comprehensive Review

Recently, the utilization of metal halide perovskites in sensing and their application in environmental studies have reached a new height. Among the different metal halide perovskites, cesium lead halide perovskites (CsPbX3; X = Cl, Br, and I) and composites have attracted great interest in sensing applications owing to their exceptional optoelectronic properties. Most CsPbX3 nanostructures and composites possess great structural stability, luminescence, and electrical properties for developing distinct optical and photonic devices. When exposed to light, heat, and water, CsPbX3 and composites can display stable sensing utilities. Many CsPbX3 and composites have been reported as probes in the detection of diverse analytes, such as metal ions, anions, important chemical species, humidity, temperature, radiation photodetection, and so forth. So far, the sensing studies of metal halide perovskites covering all metallic and organic-inorganic perovskites have already been reviewed in many studies. Nevertheless, a detailed review of the sensing utilities of CsPbX3 and composites could be helpful for researchers who are looking for innovative designs using these nanomaterials. Herein, we deliver a thorough review of the sensing utilities of CsPbX3 and composites, in the quantitation of metal ions, anions, chemicals, explosives, bioanalytes, pesticides, fungicides, cellular imaging, volatile organic compounds (VOCs), toxic gases, humidity, temperature, radiation, and photodetection. Furthermore, this review also covers the synthetic pathways, design requirements, advantages, limitations, and future directions for this material.

Mitochondria-targeted ruthenium(II) complexes for photodynamic therapy and GSH detection in living cells

Photodynamic therapy is an emerging tumor therapy that kills tumor cells by activating reactive oxygen species (ROS) produced by photosensitizers. Mitochondria, as an important organelle, are the main generator of cellular ROS. Therefore, the development of photosensitizers capable of targeting mitochondria could significantly enhance the efficacy of photodynamic therapy. In this study, two novel ruthenium(II) complexes, Ru-1 and Ru-2, were designed and synthesized, both of which were functionalized with α,β-unsaturated ketones for sensing of glutathione (GSH). The crystal structures of the two complexes were determined and they exhibited good recognition of GSH by off-on luminescence signals. The complex Ru-2 containing aromatic naphthalene can enter the cells and react with GSH to generate a strong luminescence signal that can be used to monitor intracellular GSH levels through imaging. Ru-2 also has an excellent mitochondrial localization ability with a Pearson's coefficient of 0.95, which demonstrates that it can efficiently target the mitochondria of tumor cells to enhance the effectiveness of photodynamic therapy as a photosensitizer.

Metal-assisted core-shell plasmonic nanoparticles for small molecule biothiol analysis and enantioselective recognition

Cysteine (Cys) enantiomorphs, important small-molecule biothiols, participate in various antioxidative, flavoring, and poison-removing processes in the food industry. Current cysteine enantiomorph analysis methods require effective strategies for distinguishing them due to their similar structures and reactivity. Herein, we present a metal ion-assisted enantiomorph-selective surface-enhanced Raman scattering (SERS) biosensor based on an amphiphilic polymer matrix (APM), which can promote cysteine enantiomorph (L/D-Cys) identification. The highly selective molecular orientation is perhaps caused by the intermolecular hydrogen bonding with chiral isomers (metal centers). The experimental results show that the SERS biosensor has a sensitivity-distincting factor toward L-Cys and D-Cys. The linear range is from 1 mmol L-1 to 1 nmol L-1, along with a low limit of detection of 0.77 pmol L-1. Moreover, the fabricated Cu-APM biosensor exhibits remarkable stability and high repeatability, with an RSD of 3.7%. Real food cysteine enantiomorph detection was performed with L-Cys-containing samples of onion, cauliflower, garlic, and apple, and D-Cys-containing samples of vinegar, black garlic, cheese, and beer. The results show that the Cu-APM biosensor can be utilized as a powerful tool for real-time determination of Cys enantiomorphs in different food samples. Thus, the metal-ion-assisted enantiomorph-selective SERS biosensor has potential as an adaptable tool for enantiomorph detection and food sample analysis.

Simple and Cost-Effective Quantum Dot Chemodosimeter for Visual Detection of Biothiols in Human Blood Serum

An emission "turn-off" chemodosimeter for the naked-eye detection of biothiols using silica-overcoated cadmium selenide quantum dots is developed. Hole scavenging by the thiol group of cysteine, homocysteine, or glutathione on interaction with quantum dots resulted in an instant and permanent emission quenching under physiologically relevant conditions. Also, the emission suppression is so specific that thiols and substituted thiols (methionine and cystine) can easily be distinguished. A pilot experiment for the visual detection of serum thiols in human blood was also conducted. Densitometry analysis proved the potential of this system as a new methodology in clinical chemistry and research laboratories for routine blood and urine analyses using a simple procedure. This method enables one to visually distinguish biothiols and oxidized biothiols, whose ratio plays a crucial role in maintaining "redox thiol status" in the blood.

Recent advances in the colorimetric and fluorescence analysis of bioactive small-molecule compounds based on the enzyme-like activity of nanomaterials

Nanomaterials with enzyme-like activity have been widely used in the construction of colorimetric and fluorescence sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. Furthermore, the colorimetric and fluorescence sensors, which are effective approaches for detecting bioactive small-molecule compounds, have been extensively explored due to their simple operation and high sensitivity. Recent significant researches have focused on designing various sensors based on nanozymes with peroxidase- and oxidase-like activity for the colorimetric and fluorescence analysis of different analytes. In this review, recent developments (from 2018 to present) in the colorimetric and fluorescent analysis of bioactive small-molecule compounds based on the enzyme-like activity of nanomaterials were summarized. In addition, the challenges and design strategies in developing colorimetric and fluorescent assays with high performance and specific sensing were discussed.

Theoretical investigation on a simple turn on fluorescent probe for detection of biothiols based on coumarin unit

The discovery of a simple and efficient detection method for biothiols would be scientifically significant due to the crucial role of them in various physiological processes. Recently, a simple fluorescent probe, DEMCA-NBSC, based on coumarin fragments, was developed by Ding et al., and provided an efficient way for real-time sensing of biothiols both in vivo and vitro. Theoretical insights to the fluorescence sensing mechanism of the probe were provided in this work. Details of the electron transfer process in the probe under optical excitation and the fluorescent character of the probe were analyzed using a quantum mechanical method. All these theoretical results could inspire the development of a highly convenient and efficient fluorescent probe to sense biothiols both in vivo and vitro.

Ultrasensitive Ratiometric Fluorescence Bioassay for Accurate Detection of Covid-19-Specific Nucleocapsid Protein in Clinical Serum Samples Using Modified Cleavable Mesoporous SiO2 Satellite-Enriched Carbon Dots

Due to the presence of various autofluorescent compounds in biological samples like serum and the photobleaching of organic fluorophores, fluorescence sensing has limited practical applicability. This study describes the development of an improved ratiometric fluorescence assay to determine the nucleocapsid protein (N protein), one of the most conserved biomarkers of Covid-19 in spiked and serum samples using highly stable buffer-based near IR-dual emission carbon dots (CDs) encapsulated into the cavities of cleavable silica nanocapsule (SNCs) nanocomposite. The cavities of cleavable silica nanocapsules (SNCs) and the formed core-shell CDs@ SNCs were used as a superior reservoir of fluorescent markers produced by cohydrolyzing tetraethyl orthosilicate and diiminosilane linker, which held hundreds of CDs in silica shell frameworks. The SiO2 nanocomposite was modified with an N protein antibody that specifically paired to the receptor binding region of the Cov-19 spike protein subunit. CDs were taken out of SNCs by NaBH4 reduction, and the released CDs exhibited dual emission at 475 and 675 nm when excited at 400 nm. Ratiometric detection is completed over a binding-induced, concentration-dependent immuno-affinity of the N protein that drives the fluorescence quenching phenomenon between the CDs as fluorophore and the AuNPs as quencher. As the N protein concentration increased, the intensity of the red emission (675 nm) dropped, whereas the intensity of the green emission (475 nm) already remained constant, which is due to sandwich immunoassays of CDs around AuNPs. Using the exceptional fluorescent characteristics of CDs and the high selectivity of nanocomposite functionalized with N-protein antibody, the developed assay efficiently eliminates the autofluorescence background interference of serum samples. The fluorescence ratio (I475/I675) provides a limit of detection of 2 pg mL-1 over a linear range of 0.01 to 5 ng mL-1 and exhibits an amplified sensitivity of 54 times compared to conventional immunoassay using CDs as fluorescent labels. With one-step signal amplification and requiring small sample quantities (only 20 μL), this sensing platform can be effectively used for the accurate detection of N protein, and no cross-reactivity is detected in the presence of different interfering agents.

A Green Synthesis Route to Derive Carbon Quantum Dots for Bioimaging Cancer Cells

Carbon quantum dots (CQDs) are known for their biocompatibility and versatile applications in the biomedical sector. These CQDs retain high solubility, robust chemical inertness, facile modification, and good resistance to photobleaching, which makes them ideal for cell bioimaging. Many fabrication processes produce CQDs, but most require expensive equipment, toxic chemicals, and a long processing time. This study developed a facile and rapid toasting method to prepare CQDs using various slices of bread as precursors without any additional chemicals. This fast and cost-effective toasting method could produce CQDs within 2 h, compared with the 10 h process in the commonly used hydrothermal method. The CQDs derived from the toasting method could be used to bioimage two types of colon cancer cells, namely, CT-26 and HT-29, derived from mice and humans, respectively. Significantly, these CQDs from the rapid toasting method produced equally bright images as CQDs derived from the hydrothermal method.