A New, Extremely Sensitive, Turn-Off Optical Sensor Utilizing Schiff Base for Fast Detection of Cu(II)

Ultrasensitive and Selective Nitrogen-Doped Fluorescent Carbon Dots Probe for Quantification Analysis of Trace Cu2+ in the Aqueous Environment

As a typical non-ferrous metal, copper is heavily used in the manufacturing and chemical industries. Copper pollution has been demonstrated to have a significant detrimental impact on the natural environment, as well as causing irreparable damage to the human body, such as elevated Cu2+ levels have been identified as a factor in the pathogenesis of AD (Alzheimer's disease). In this study, novel nanoscale carbon dots Blue-CDs (B-CDs) were obtained by the solvothermal approach in formamide solution utilizing citric acid as the carbon source and ethylenediamine as the nitrogen dopant. The particle size of B-CD was assessed to be 2.17 nm, with a quantum yield (QY) of 10.28%. The B-CDs were found to be extinguished upon exposure to Cu2+, which exhibited a good fluorescence detection linear relationship within the concentration range of 0.25-10.0 µM Cu2+, showing a limit of detection (LOD) is 0.18 µM. B-CDs have been effectively used for the measurement of Cu2+ in actual aqueous systems. It is due to the chemical reactions that take place among the B-CDs and the Cu²⁺ that make the sensor highly sensitivities and highly selectivities. The results of the experiment demonstrate that the fluorescence quenching process is a consequence of Cu2+ binding to the amino groups of carbon dots, forming complexes via a non-radiative photoinduced electron transfer process. In conclusion, the described simple sensing techniques could be effectively utilized as monitoring tools for Cu2+ in environmental waters.

Curcumin-Derived Turn-Off Fluorescent Probe for Copper (II) Ion Detection and Live Cell Imaging Applications

A curcumin-derived chemosensor 4,4'-((1E,3Z,5Z,6E)-3,5-bis((2hydroxyphenyl)imino) hepta-1,6-diene-1,7-diyl)bis(2-methoxyphenol) (HIBMP) was developed from curcumin and o-aminophenol using Schiff base condensation method. HIBMP selectively recognizes Cu (II) ion (Cu (II)) relative to other tested metal ions. Selective binding of Cu (II) ion turns off the fluorescent property of HIBMP and shows no interference with other metal ions. Moreover, the favourable binding of Cu (II) with HIBMP was noticed by a good linearity between the fluorescence intensity and concentration of Cu (II) with a range of 0-15.6 × 10-7 M, and the limit of detection was determined to be as low as 30.1 nM. Furthermore a 1:1 stoichiometry was identified from the results of Job's plot and HR-MS. Density functional theory (DFT) calculation results expressed that the intramolecular charge transfer (ICT) during chelation is responsible for quenching of fluorescence. Besides, the fluorescence life time measurement and ethylenediaminetetraacetic acid (EDTA) titration method revealed the stability and reversibility of the sensor. Practical use of the sensor was achieved through the quantitative analysis of spiked Cu (II) ion in real water samples with good recoveries, and biological experiments exposed that the sensor was less toxic and could be applied in fluorescence imaging of Cu (II) in living cells.

A novel organic chromo-fluorogenic optical sensor for detecting chromium ions

Sensing trivalent chromium ion (Cr(III)) is widely applied in different areas, such as clinical analysis, marine, environmental monitoring, or even chemical industry applications. Cr(III) has a significant role in the physiological process of human life. It is classified as an essential micronutrient for living organisms. Herein, we developed and designed a novel optical Cr(III) ions sensor film. The investigated sensor has a relatively small dynamic range of 1.24 × 10-3 to 0.5 μM. We report a highly sensitive optical sensor film for Cr(III) ions based on diethyl 3,4-diaminothieno[2,3-b]thiophene-2,5-dicarboxylate (3D) probe. The optical characteristics of the chemical probe exhibit substantial emission at 460 nm under 354 nm excitation. Besides, the interaction of the Cr(III) ions with 3D involves a complex formation with a 2:1 (metal: ligand) ratio, which is convoyed by the main peak enhancement that centered at 460 nm of 3D, and the main peak is red-shifted to 480 nm. The easily discernible fluorescence enhancement effect is a defining characteristic of the complexation reaction between the 3D probe and Cr(III). On the basis of the substantial fluorescence mechanism caused by the formation of a (Cr(III)-3D complex, which inhibits the photo-induced electron transfer (PET) process, the devised optical sensor was proposed. This film exhibits exceptional sensitivity and selectivity due to its notable fluorescence properties, stock shift of less than 106 nm, and detection capabilities at a significantly low detection limit of 0.37 × 10-3 μM. The detection procedure is executed by utilizing a physiological pH medium (pH = 7.4) with a relative standard deviation RSDr (1 %, n = 3). In addition, the 3D sensor demonstrates a high degree of affinity for Cr(III), as determined by the calculation of its binding constant to be 1.40 × 106. We present an impressive optical sensor that is constructed upon a three-dimensional molecule.

Boron-Salphen Conjugate based Molecular Probe Exhibiting Fluorescence On-Off-On Response in Detection of Cu2+ and ATP through Displacement Approach

Synthesis and photophysical properties of a fluorescent probe HBD is described. Probe upon interaction with metal ions, anions and nucleoside pyrophosphates (NPPs) showed fluorescence quenching with Cu2+ due to chelation enhanced quenching effect (CHEQ). Moreover, interaction of ensemble HBD.Cu2+ with anions and NPPs showed fluorescence "turn-On" response with ATP selectively. "On-Off-On" responses observed with Cu2+ and ATP is attributed to an interplay between ESIPT and TICT processes. Cyclic voltammogram of probe exhibited quasi-reversible redox behaviour with three oxidation and two reduction potentials and the change in band gaps of probe suggested the interaction with Cu2+ and ATP. The 2 : 1 and 1 : 1 binding stoichiometry for an interaction between probe and Cu2+ (LOD, 62 nM) and ensemble, HBD.Cu2+ with ATP (LOD, 0.4 μM) respectively are realised by Job's plot and HRMS data. Cell imaging studies carried out to detect Cu2+ and ATP in HeLa cells. Also, the output emission observed with Cu2+ and ATP is utilized to construct an implication (IMP) logic gate. Test paper strips showed naked-eye visible color responses to detect Cu2+ and ATP. In real water samples probe successfully detected copper (0.03 μM) between 5-6.5 ppb level (ICP-MS method).

Lanthanide-Based Single-Chain Nanoparticles as "Visual" Pass/Fail Sensors of Maximum Permissible Concentration of Cu2+ Ions in Drinking Water

The maximum permissible concentration (m.p.c.) of Cu2+ ions in drinking water, as set by the World Health Organization (WHO) is m.p.c. (Cu2+)WHO = 30 × 10-6 m, whereas the US Environmental Protection Agency (EPA) establishes a more restrictive value of m.p.c. (Cu2+)EPA = 20 × 10-6 m. Herein, for the first time ever, a family of m.p.c. (Cu2+) "visual" pass/fail sensors is developed based on water-soluble lanthanide-containing single-chain nanoparticles (SCNPs) exhibiting an average hydrodynamic diameter less than 10 nm. Both europium (Eu)- and terbium (Tb)-based SCNPs allow excessive Cu2+ to be readily detected in water, as indicated by the red-to-transparent and green-to-transparent changes, respectively, under UV light irradiation, occurring at 30 × 10-6 m Cu2+ in both cases. Complementary, dysprosium (Dy)-based SCNPs show a yellow color-to-transparent transition under UV light irradiation at ≈15 × 10-6 m Cu2+. Eu-, Tb-, and Dy-containing SCNPs prove to be selective for Cu2+ ions as they do not respond against other metal ions, such as Fe2+, Ag+, Co2+, Ba2+, Ni2+, Hg2+, Pb2+, Zn2+, Fe3+, Ca2+, Mn2+, Mg2+, or Cr3+. These new m.p.c. (Cu2+) "visual" pass/fail sensors are thoroughly characterized by a combination of techniques, including size exclusion chromatography, dynamic light scattering, inductively coupled plasma-mass spectrometry, as well as infrared, UV, and fluorescence spectroscopy.

SERS detection of dopamine using metal-chelated Ag nanoshell

As the concentrations of different neurotransmitters can indicate the presence of certain disorders affecting brain functions, quantitative analyses of neurotransmitters have attracted increasing attention in various fields. Surface-enhanced Raman scattering (SERS) spectroscopy is an outstanding spectroscopic analytical tool that enables detection at the single molecule level with high specificity. As local field enhancement of surface plasmon is effective within nanometers, active interaction between SERS-active noble metals (gold and silver) and analyte molecules enhances the molecular detection capacity of SERS. However, neurotransmitters and noble metal nanoparticles are often not affinitive, because neurotransmitters generally have a hydroxyl group rather than a thiol group. As a result, the interaction between the two typically remains inactive, which makes detection more difficult. To overcome this limitation, in the present work we utilized metal-chelation to attract dopamine, a neurotransmitter molecule, close to the surface of silver nanoparticles. AgNS was capped with poly(vinyl alcohol) (PVA) and sequentially integrated with copper ion to bind dopamine in the form of chelate bonding between dopamine and copper. The PVA linked AgNS and metal ions through a coordinate bond between hydroxyl groups and metal ions. This metal-chelation-functionalized nanoprobe allowed us to stably detect dopamine in aqueous solution at a concentration of less than 10-6 M. Therefore, this method provides a convenient and easy-to-prepare option for the effective detection of dopamine, thus meaning it has the potential to be applied to other neurotransmitters.

Dual-emission ciprofloxacin-gold nanoclusters enable ratiometric sensing of Cu2+, Al3+, and Hg2

An innovative triple optical sensor is presented that utilizes gold nanoclusters (GNCs) stabilized with ciprofloxacin (CIP) and bovine serum albumin (BSA). The sensor is designed to identify three critical metal ions, namely Cu2+, Al3+, and Hg2+. Under 360 nm excitation, the synthesized CIP-BSA-GNCs demonstrate dual fluorescence emission with peaks at 448 nm (blue) and 612 nm (red). The red emission is associated with the interior of the CIP-BSA-GNCs, whereas the blue emission results from the surface-bound CIP molecules. The sensitive and selective fluorescent nanosensor CIP-BSA-GNCs were employed to detect Cu2+, Al3+, and Hg2+ ions. Cu2+ effectively quenched the fluorescence intensity of the CIP-BSA-GNCs at both peaks via the internal charge transfer mechanism (ICT). Cu2+ could be detected within the concentration range 1.13 × 10-3 to 0.05 µM, with a detection limit of 0.34 nM. Al3+ increased the intensity of CIP fluorescence at 448 nm via the chelation-induced fluorescence enhancement mechanism. The fluorescence intensity of the core CIP-BSA-GNCs at 612 nm was utilized as a reference signal. Thus, the ratiometric detection of Al3+ succeeded with a limit of detection of 0.21 nM within the dynamic range 0.69 × 10-3 to 0.07 µM. Hg2+ effectively quenched the fluorescence intensity of the CIP-BSA-GNCs at 612 nm via the metallophilic interaction mechanism. The fluorescence intensity of CIP molecules at 448 nm was utilized as a reference signal. This allowed for the ratiometric detection of Hg2+ with a detection limit of 0.7 nM within the concentration range 2.3 × 10-3 to 0.1 µM.

Highly sensitive and specific detection of Ni2+ using a novel fluorometric probe in the DMSO-H2O system

The rapid detection of Ni ions has important research and application value. This paper presents a novel specific turn-off fluorescence probe PCTMP-FS for detecting Ni2+ ions. The carbazole-based compound PCTMP is first synthesized via a two-step reaction. PCTMP-FS comprises PCTMP dispersed into a DMSO-H2O (fw = 30% v/v) mixed solvent. The probe demonstrates prominent selectivity and anti-interference abilities for detecting Ni2+ with a limit of detection (LOD) of 0.233 μM. The probe exhibits good applicability over a wide range of acidities. The detecting mechanism of the probe is due to the complex formed by PCTMP and Ni2+ (2:1), which destroys intramolecular charge transfer in the compound. The probe has good repeatability and demonstrates excellent stability and sensitivity for the detection of Ni2+ in real water samples.

Strategies for Improving Selectivity and Sensitivity of Schiff Base Fluorescent Chemosensors for Toxic and Heavy Metals

Toxic cations, including heavy metals, pose significant environmental and health risks, necessitating the development of reliable detection methods. This review investigates the techniques and approaches used to strengthen the sensitivity and selectivity of Schiff base fluorescent chemosensors designed specifically to detect toxic and heavy metal cations. The paper explores a range of strategies, including functional group variations, structural modifications, and the integration of nanomaterials or auxiliary receptors, to amplify the efficiency of these chemosensors. By improving selectivity towards targeted cations and achieving heightened sensitivity and detection limits, consequently, these strategies contribute to the advancement of accurate and efficient detection methods while increasing the range of end-use applications. The findings discussed in this review offer valuable insights into the potential of leveraging Schiff base fluorescent chemosensors for the accurate and reliable detection and monitoring of heavy metal cations in various fields, including environmental monitoring, biomedical research, and industrial safety.

Design, synthesis, and density functional theory studies of a new selective chemosensor for Pb2

Herein, we have focused on a new colorimetric ligand synthesized from the reaction of 2-hydroxy-5-methylbenzene-1,3-dialdehyde with 2-amino-thiophenol, and investigated its activity as a sensor. In this regard, the sensory activity of the ligand towards different ions (Mn2+, Cu2+, Co2+, Fe2+, Fe3+, Zn2+, Ni2+, Cd2+, Ag+, Na+, Cs+, Mg2+, Al3+, Ba2+, K+, and Pb2+) was studied. The specificity of ion bindings is discussed through UV-Vis analysis. The ligand that was synthesized showed remarkable sensitivity, with a detection limit of 0.001 ppb. Additionally, the presence of Pb2+ ions can be visually detected through a color change from colorless to yellow. In the last part of this work, we seek to predict the available experimental measurements. Density functional theory (DFT) and quantum theory of atoms in molecules (QTAIM) are employed to examine the bonding between the ligand and the Pb2+ ion. The effect of water solvent was thoroughly examined for all the steps via the conductor-like Polarizable Continuum Model (CPCM). The theoretical findings revealed that electronic properties, including energy gap, adsorption energy, charge/energy transfer, and optical characteristics, undergo significant changes when Pb2+ cations are present. Hence, it can be inferred that the newly synthesized chemosensor (NC) is highly efficient in detecting Pb2+.