N,Fe-Doped Carbon Dot Decorated Gear-Shaped WO3 for Highly Efficient UV-Vis-NIR-Driven Photocatalytic Performance

Multifunctional N, Fe-doped carbon dots with peroxidase-like activity for the determination of H2O2 and ascorbic acid and cell protection against oxidation

Multifunctional N, Fe-doped carbon dots (N, Fe-CDs) were synthesized by the one-step hydrothermal method using ferric ammonium citrate and dicyandiamide as raw materials. The N, Fe-CDs exhibited peroxidase-like (POD) activity by catalyzing the oxidization of 3,3',5,5'-tetramethylbenzidine (TMB) to the green oxidation state ox-TMB in the presence of hydrogen peroxide (H2O2). Subsequently, based on the POD activity of N, Fe-CDs, an efficient and sensitive colorimetric method for the detection of H2O2 and ascorbic acid (AA) was established with a limit of detection of 0.40 µM and 2.05 µM. The proposed detection method has been successfully applied to detect AA in fruit juice, vitamin C tablets, and human serum samples and has exhibited excellent application prospects in biotechnology and food fields. Furthermore, N, Fe-CDs also showed a protective effect on the cell damage caused by H2O2 and could be used as an antioxidant agent.

High-performance photocatalytic reduction of Cr(VI) using a retrievable Fe-doped WO3/SiO2 heterostructure

The enhancement of the photocatalytic performance of pristine WO3 was systematically adjusted due to its fast recombination rate and low reduction potential. A designed heterostructure photocatalyst was necessarily synthesised by Fe3+ metal ions doping into WO3 structure with and composition modification. In this study, we synthesised a retrievable Fe-doped WO3/SiO2 heterostructure using a surfactant-assisted hydrothermal method. This heterostructure was then employed as an effective photocatalyst for the removal of Cr(VI) under visible light irradiation. Enlarged photocatalytic reduction was observed over a synergetic 7.5 mol% Fe-doped WO3/SiO2-20 nanocomposite, resulting in dramatically increased activity compared with undoped WO3 and SiO2 nanomaterials under visible light illumination within 90 min. The presence of 7.5 mol% Fe3+ ion dopant in WO3 optimised electron-hole recombination, consequently reducing WO3 photocorrosion. After adding SiO2 nanoparticles, the binary WO3-SiO2 nanocomposite played roles as both adsorbent and photocatalyst to increase specific surface area. Thus, the 7.5 mol% Fe-doped WO3/SiO2-20 nanocomposite catalyst had more active sites on the surface of catalyst, and enhanced photocatalytic reduction was significantly achieved. The results showed 91.1% photocatalytic reduction over the optimum photocatalyst, with a photoreduction kinetic rate of 21.1 × 10-3 min-1, which was approximately four times faster than pristine WO3. Therefore, the superior optimal photocatalyst demonstrated reusability, with activities decreasing by only 9.8% after five cycles. The high photocatalytic performance and excellent stability of our photocatalyst indicate great potential for water pollution treatments.

Photocatalytic degradation performance of antibiotics by WO3/α-Fe2O3/zeolite type II heterojunction with core-shell structure

The accumulation of antibiotics in the environment can be harmful to human health, and research on their disposal technologies is of increasing interest. In this study, WO3/α-Fe2O3/zeolite (WFZ) type II heterojunction composites with core-shell structures were prepared by coupling WO3 semiconductors with visible-light photocatalytic activity with α-Fe2O3 via hydrothermal synthesis using zeolite as a carrier for the adsorption of synergistic photocatalytic degradation of antibiotics in wastewater. X-ray diffraction, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), specific surface, and porosity measurements were used to characterize the structure of WFZ type II heterojunction. The performance of WFZ heterojunction for the visible photocatalytic degradation of antibiotics (tetracycline hydrochloride (TCH), ciprofloxacin (CIP), and levofloxacin hydrochloride (LVF)) was investigated. Through four photocatalytic cycles, the catalyst exhibited excellent durability and stability. This was attributed to the core-shell structure and type II heterojunction promoting the effective separation of photogenerated carriers and the extended visible light response range, which resulted in the best photocatalytic activity of the catalyst under visible light irradiation. Radical trapping experiments showed that superoxide radicals (•O2-) and hydroxyl radical (•OH) were the main active species that played a major role in the photocatalytic degradation. These findings show that the synthesized WFZ type-II heterojunction can be used as a reliable visible-light-responsive photocatalyst for the treatment of antibiotics in wastewater.

Synthesis of Highly Efficient (0D/1D) Z-Scheme CdS-NPs@ZnO-NRs Visible-Light-Driven Photo(electro)catalyst for PEC Oxygen Evolution Reaction and Removal of Tetracycline

Herein, we synthesized the cadmium sulfide nanoparticles (CdS-NPs) coated zinc oxide nanorods (ZnO-NRs) core-shell like CdS-NPs@ZnO-NRs heterojunction for photo(electro)chemical applications. The CdS-NPs and ZnO-NRs were synthesized through a simple hydrothermal path. The physicochemical and optoelectronic properties of the as-prepared catalysts are characterized by various spectroscopy techniques, such as FTIR, XRD, SEM, TEM, EDX, VB-XPS, DRS, and PL. The photocatalytic performances of the CdS-NPs@ZnO-NRs catalyst were evaluated by photodegradation of tetracycline (TC) in aqueous media under visible-light irradiation, which demonstrated 94.07 % of removal (k’ = 0.0307 min−1) within 90 min. On the other hand, the photoelectrochemical (PEC) water-oxidation/oxygen-evolution reaction (OER) was performed, which resulted in the photocurrent density of 3.002 mA/cm2 and overpotential (at 2 mA/cm2) of 171 mV (vs RHE) in 1.0 M KOH under AM 1.5G illumination. The reactive species scavenging experiment demonstrates the significant contributions of photogenerated holes towards TC removal. Furthermore, the Z-scheme CdS-NPs@ZnO-NRs core-shell heterojunction exhibits high efficiency, recyclability, and photostability, demonstrating that the CdS-NPs@ZnO-NRs is a robust photo(electro)catalyst for visible-light PEC applications.

Recent Progress on Carbon Quantum Dots Based Photocatalysis

As a novel carbon allotrope, carbon quantum dots (CQDs) have been investigated in various fields, including photocatalysis, bioimaging, optoelectronics, energy and photovoltaic devices, biosensing, and drug delivery owing to their unique optical and electronic properties. In particular, CQDs' excellent sunlight harvesting ability, tunable photoluminescence (PL), up-conversion photoluminescence (UCPL), and efficient photo-excited electron transfer have enabled their applications in photocatalysis. This work focuses on the recent progress on CQDs-related materials' synthesis, properties, and applications in photocatalysis.

Properties, optimized morphologies, and advanced strategies for photocatalytic applications of WO3 based photocatalysts

The development of WO₃ based photocatalysts has gained considerable attention across the world, especially in the realm of environmental remediation and energy production. WO₃ has a band gap of 2.5- 2.7 eV that falls under the visible region and is thus a potential candidate to utilize in various photocatalytic processes. As an earth-abundant metal oxide, WO₃ discovered in 1976 displayed excellent electronic and morphological properties, good stability, and enhanced photoactivity with diverse crystal phases. Also, it unveils non-toxicity, high stability in drastic conditions, biocompatibility, low cost, excellent hole mobility (10 cm² V^-1s^-1), and tunable band gap. This review provides a comprehensive overview of the different properties of WO₃ inclusive of crystallographic, electrical, optical, thermoelectrical, and ferroelectric properties. The different morphologies of WO₃ based on dimensions were obtained by adopting different fabrication methods including inspecting their effects on the efficiency of WO₃. Numerous strategies to construct an ideal photocatalyst such as engineering crystal facets, surface defects, doping, heterojunction formation explaining specifically type-II, Z-scheme, and S-scheme mechanisms with addition to carbonaceous based WO₃ nanocomposites are summed up to explore the photocatalytic performance. The typical application of WO₃ is deliberated in detail involving the role and efficiency of WO₃ in pollutant degradation, CO₂ photoreduction, and water splitting. Besides, other applications of WO₃ as gas-sensor, bio-sensor, decomposition of VOCs, heavy metals ions adsorption, and antimicrobial property are also included. Moreover, the numerous aspects responsible for the high efficiency of WO₃-based nanocomposites with their challenges, opportunities, and future aspects are summarized. Hopefully, this review may inspire researchers to explore new ideas to boost the production of clean energy for the next generation.

Applications of Carbon Dots for the Photocatalytic and Electrocatalytic Reduction of CO2

The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.

Surface chemistry in calcium capped carbon quantum dots

Colloidal carbon quantum dots (C-dots) have attracted a lot of attention because of their excellent optical properties for various types of applications. Due to the complicated structure of C-dots, the photoluminescence (PL) mechanism of C-dots is still unclear. In particular, it is still a big challenge to understand well the surface chemistry of C-dots. In this work, we used a vacuum-heating approach to produce high-quality C-dots. With different purification procedures, the surface chemistry of C-dots can be well-controlled. Removal of Ca²⁺ by Na₂CO₃ led to the disappearance of the absorption at 405 nm and a decrease of the quantum yield. In addition, the Na₂CO₃ treated C-dots exhibited an excitation-dependent PL behavior. These results confirmed that Ca²⁺ can interact with the surface functional group of C[double bond, length as m-dash]O of the C-dots, forming a stable structure surrounding the C-dot core, which contributed to a high quantum yield (QY) of 65%, excitation-independent PL behavior and absorption at 405 nm. Furthermore, the PL of the C-dots is strongly dependent on the pH, indicating that the Ca²⁺ capped C-dots could be used as pH indicators. Our finding provides clear evidence for the surface-chemistry dependent PL behavior of C-dots.

Tunable and sustainable photocatalytic activity of photochromic Y-WO3 under visible light irradiation

Although photochromic and photocatalytic performance are the most significant features of WO3, the effects of photochromism on photocatalytic activities have not been investigated further. Herein, a novel gear-shaped WO3, with high coloration efficiency, fast reversibility, and remarkable photocatalytic performance was successfully prepared via a facile hydrothermal method. The influence of photochromic effects on its photocatalytic properties was evaluated under visible light irradiation. The results showed that the yellow WO3 sample exhibited higher photocatalytic efficiencies toward tetracycline hydrochloride (TCH), oxytetracycline (OTC), rhodamine B (RhB), and ciprofloxacin (CIP) (94.3%, 87.9%, 76%, and 68.6%, respectively, in 60 min). Further research found that the redox conversion between W6+ and W5+ played a key role in separating e-/h+ pairs. Importantly, the rapid and reversible conversion between W6+ and W5+ could be realized through light radiation or H2O2 treatment. Therefore, the gear-shaped WO3 possessed tunable and sustainable photocatalytic properties and maintained a high level of activity after recycling ten times under visible light irradiation. This work provides new insights into practical WO3 applications for environmental remediation based on photochromic regulation.