Heterogeneous Catalysts for the Conversion of Glucose into 5-Hydroxymethyl Furfural

Synthesis and Catalytic Applications of Advanced Sn- and Zr-Zeolites Materials

The incorporation of isolated Sn (IV) and Zr (IV) ions into silica frameworks is attracting widespread attention, which exhibits remarkable catalytic performance (conversion, selectivity, and stability) in a broad range of reactions, especially in the field of biomass catalytic conversion. As a representative example, the conversion route of carbohydrates into valuable platform and commodity chemicals such as lactic acid and alkyl lactates, has already been established. The zeotype materials also possess water-tolerant ability and are capable to be served as promising heterogeneous catalysts for aqueous reactions. Therefore, dozens of Sn- and Zr-containing silica materials with various channel systems have been prepared successfully in the past decades, containing 8 membered rings (MR) small pore CHA zeolite, 10-MR medium pore zeolites (FER, MCM-56, MEL, MFI, MWW), 12-MR large pore zeolites (Beta, BEC, FAU, MOR, MSE, MTW), and 14-MR extra-large pore UTL zeolite. This review about Sn- and Zr-containing metallosilicate materials focuses on their synthesis strategy, catalytic applications for diverse reactions, and the effect of zeolite characteristics on their catalytic performances.

Synthesis of Pyrrole-2-Carboxylic Acid from Cellulose- and Chitin-Based Feedstocks Discovered by the Automated Route Search

The shift towards sustainable feedstocks for platform chemicals requires new routes to access functional molecules that contain heteroatoms, but there are limited bio-derived feedstocks that lead to heteroatoms in platform chemicals. Combining renewable molecules of different origins could be a solution to optimize the use of atoms from renewable sources. However, the lack of retrosynthetic tools makes it challenging to examine the extensive reaction networks of various platform molecules focusing on multiple bio-based feedstocks. In this study, a protocol was developed to identify potential transformation pathways that allow for the use of feedstocks from different origins. By analyzing existing knowledge on chemical reactions in large databases, several promising synthetic routes were shortlisted, with the reaction of D-glucosamine and pyruvic acid being the most interesting to make pyrrole-2-carboxylic acid (PCA). The optimized synthetic conditions resulted in 50 % yield of PCA, with insights gained from temperature variant NMR studies. The use of substrates obtained from two different bio-feedstock bases, namely cellulose and chitin, allowed for the establishment of a PCA-based chemical space.

Synthesis of Hollow Mesoporous Silica Nanospheroids with O/W Emulsion and Al(III) Incorporation and Its Catalytic Activity for the Synthesis of 5-HMF from Carbohydrates

Controlling the particle size as well as porosity and shape of silica nanoparticles is always a big challenge while tuning their properties. Here, we designed a cost-effective, novel, green synthetic method for the preparation of perforated hollow mesoporous silica nanoparticles (PHMS-1) using a very minute amount of cationic surfactant in o/w-type (castor oil in water) emulsion at room temperature. The grafting of Al(III) through post-synthetic modification onto this silica framework (PHMS-2, Si/Al ~20 atomic percentage) makes this a very efficient solid acid catalyst for the conversion of monosaccharides to 5-HMF. Brunauer–Emmett–Teller (BET) surface area for the pure silica and Al-doped mesoporous silica nanoparticles (MSNs) were found to be 866 and 660 m2g−1, respectively. Powder XRD, BET and TEM images confirm the mesoporosity of these materials. Again, the perforated hollow morphology was investigated using scanning electron microscopic analysis. Al-doped hollow MSNs were tested for acid catalytic-biomass conversion reactions. Our results show that PHMS-2 has much higher catalytic efficiency than contemporary aluminosilicate frameworks (83.7% of 5-HMF yield in 25 min at 160 °C for fructose under microwave irradiation).

Novel Challenges on the Catalytic Synthesis of 5-Hydroxymethylfurfural (HMF) from Real Feedstocks

The depletion of fossil resources makes the transition towards renewable ones more urgent. For this purpose, the synthesis of strategic platform-chemicals, such as 5-hydroxymethylfurfural (HMF), represents a fundamental challenge for the development of a feasible bio-refinery. HMF perfectly deals with this necessity, because it can be obtained from the hexose fraction of biomass. Thanks to its high reactivity, it can be exploited for the synthesis of renewable monomers, solvents, and bio-fuels. Sustainable HMF synthesis requires the use of waste biomasses, rather than model compounds such as monosaccharides or polysaccharides, making its production more economically advantageous from an industrial perspective. However, the production of HMF from real feedstocks generally suffers from scarce selectivity, due to their complex chemical composition and HMF instability. On this basis, different strategies have been adopted to maximize the HMF yield. Under this perspective, the properties of the catalytic system, as well as the choice of a suitable solvent and the addition of an eventual pretreatment of the biomass, represent key aspects of the optimization of HMF synthesis. On this basis, the present review summarizes and critically discusses the most recent and attractive strategies for HMF production from real feedstocks, focusing on the smartest catalytic systems and the overall sustainability of the adopted reaction conditions.

Sustainable Approaches to Selective Conversion of Cellulose Into 5-Hydroxymethylfurfural Promoted by Heterogeneous Acid Catalysts: A Review

5-Hydroxymethylfurfural (5-HMF) as a triply catalytic product is a value-added refining chemical in industry production. 5-HMF as biomass feedstock enables to be transformed into other high-value industrial compounds, such as 2,5-furandicarboxylic acid (FDCA), 5-hydroxymethyl-2-furancarboxylic acid (HMFCA), 5-formyl-2-furancarboxylic acid (FFCA), 2,5-diformylfuran (DFF), 2,5-bis(aminomethyl)furan (BAMF), and 2,5-dimethylfuran (DMF). Hence, catalytic conversion of biomass into 5-HMF has been given much more attention by chemists. In this review, some latest studies about the conversion of cellulose to 5-HMF have been introduced systematically. Solid acids such as heterogeneous catalysts have been widely applied in the conversion of cellulose into 5-HMF. Therefore, some novel solid acids with Brønsted and/or Lewis acidic sites, such as sulfonated solid acids, carbon-based acids, and zeolite particles employed for biomass conversions are listed.

Catalytic Routes to Produce Polyphenolic Esters (PEs) from Biomass Feedstocks

Polyphenolic esters (PEs) are valuable chemical compounds that display a wide spectrum of activities (e.g., anti-oxidative effects). As a result, their production through catalytic routes is an attractive field of research. The present review aims to discuss recent studies from the literature regarding the catalytic production of PEs from biomass feedstocks, namely, naturally occurred polyphenolic compounds. Several synthetic approaches are reported in the literature, mainly bio-catalysis and to a lesser extent acid catalysis. Immobilized lipases (e.g., Novozym 435) are the preferred enzymes thanks to their high reactivity, selectivity and reusability. Acid catalysis is principally investigated for the esterification of polyphenolic acids with fatty alcohols and/or glycerol, using both homogeneous (p-toluensulfonic acid, sulfonic acid and ionic liquids) and heterogeneous (strongly acidic cation exchange resins) catalysts. Based on the reviewed publications, we propose some suggestions to improve the synthesis of PEs with the aim of increasing the greenness of the overall production process. In fact, much more attention should be paid to the use of new and efficient acid catalysts and their reuse for multiple reaction cycles.