Photocatalytic Degradation of Thiacloprid Using Tri-Doped TiO2 Photocatalysts: A Preliminary Comparative Study

Highly Stable Self-Cleaning Paints Based on Waste-Valorized PNC-Doped TiO2 Nanoparticles

Adding photocatalytically active TiO2 nanoparticles (NPs) to polymeric paints is a feasible route toward self-cleaning coatings. While paint modification by TiO2-NPs may improve photoactivity, it may also cause polymer degradation and release of toxic volatile organic compounds. To counterbalance adverse effects, a synthesis method for nonmetal (P, N, and C)-doped TiO2-NPs is introduced, based purely on waste valorization. PNC-doped TiO2-NP characterization by vibrational and photoelectron spectroscopy, electron microscopy, diffraction, and thermal analysis suggests that TiO2-NPs were modified with phosphate (P=O), imine species (R=N-R), and carbon, which also hindered the anatase/rutile phase transformation, even upon 700 °C calcination. When added to water-based paints, PNC-doped TiO2-NPs achieved 96% removal of surface-adsorbed pollutants under natural sunlight or UV, paralleled by stability of the paint formulation, as confirmed by micro-Fourier transform infrared (FTIR) surface analysis. The origin of the photoinduced self-cleaning properties was rationalized by three-dimensional (3D) and synchronous photoluminescence spectroscopy, indicating that the dopants led to 7.3 times stronger inhibition of photoinduced e-/h+ recombination when compared to a benchmark P25 photocatalyst.

Toxicological approaches as tool to assess the effects of a mixture of photocatalytic degradation products originated from the unregulated neonicotinoid acetamiprid employing a terrestrial organism (Eisenia andrei)

Acetamiprid (ACT) has been detected in several water sources in Latin America. The presence of its degradation products in the environment is not negligible and transformation products (TPs) significantly contribute to environmental health risks. Although advanced oxidative processes are promising for the treatment of this neocotinoid, effects of these are still unknown. In this context, the effects of a mixture of photocatalytic degradation products resulting from an ACT treatment for 90 min employing TiO2/UV on cytotoxicity and oxidative stress parameters in Eisenia andrei earthworms in acute and chronic experiments using typical Latin American soil were assessed. Acute contact tests were performed (72 h) using a filter paper moistened with an ACT solution and a chronic test was performed using Oxisoil (200 g) moistened with an ACT solution for 45 days. Catalase (CAT) and glutathione-S-transferase (GST) activities, reduced glutathione (GSH) levels and cytotoxicity (cellular eleocyte and amoebocyte assessments) were investigated. Over 75 % of ACT was degraded within the first 15 min of treatment, with levels below the limit of detection after 60 min. The acute test revealed greater cytotoxic effects associated with the effluents treated for T0 and T15 min, with decreased cell density noted after 48 h of exposure, in addition to CAT induction (in all treatments) and GST induction following T0, T15 and T90 min exposures. Concerning the chronic assay, decreases in cell density (T0, T15, T60 and T90 min) and viability (T0, T60 and T90 min) were observed after 45 days, in addition to induced CAT activity following T0, T15 and T60 exposures and GST induction following the T60 min exposure. Reduced glutathione levels were unaltered, comprising the least sensitive biomarker among the investigated parameters to the treated effluent exposures. The mixture of ACT degradation products can cause toxic effects to non-target organisms, despite parent compound degradation, alerting for the need for ecotoxicological tests to prove decreased effluent toxicity, in addition to the improvement of degradation techniques.

Sustainable magnetically recoverable Iridium-coated Fe3O4 nanoparticles for enhanced catalytic reduction of organic pollutants in water

The reduction of nitroarenes to aromatic amines is one of the potential pathways to remediate the hazardous impact of toxic nitroarenes on the aquatic environment. Aromatic amines obtained from the reduction of nitroaromatics are not only less toxic than nitroaromatics but also act as important intermediates in the synthesis of dyes, drugs, pigments, herbicides, and polymers. There is a huge demand for the development of cost-effective, and eco-friendly catalysts for the efficient reduction of nitroarenes. In the present study, Fe₃O₄@trp@Ir nanoparticles were explored as efficient catalysts for the reduction of nitroarenes. Fe₃O₄@trp@Ir magnetic nanoparticles were fabricated by surface coating of Fe₃O₄ with tryptophan and iridium by co-precipitation method. As-prepared Fe₃O₄@trp@Ir nanoparticles are environmentally benign efficient catalysts for reducing organic pollutants such as 4-nitrophenol (4-NP), 4-nitroaniline (4-NA), and 1-bromo-4-nitrobenzene (1-B-4-NB). The key parameters that affect the catalytic activity like temperature, catalyst loading, and the concentration of reducing agent NaBH₄ were optimized. The obtained results proved that Fe₃O₄@trp@Ir is an efficient catalyst for reducing nitroaromatics at ambient temperature with a minimal catalyst loading of 0.0025%. The complete conversion of 4-nitrophenol to 4-aminophenol took only 20 s with a minimal catalyst loading of 0.0025% and a rate constant of 0.0522 s^-1. The high catalytic activity factor (1.040 s^-1 mg^-1) and high turnover frequency (9 min^-1) obtained for Fe₃O₄@trp@Ir nanocatalyst highlight the possible synergistic effect of the two metals (Fe and Ir). The visible-light photocatalytic degradation of 4-NP was also investigated in the presence of Fe₃O₄@trp@Ir. The photocatalytic degradation of 4-NP by Fe₃O₄@trp@Ir is completed in 20 min with 95.15% efficiency, and the rate of photodegradation of 4-NP (0.1507 min^-1) is about twice the degradation rate of 4-NP in the dark (0.0755 min^-1). The catalyst was recycled and reused for five cycles without significant reduction in the conversion efficiency of the catalyst.

Synthesis and Application of Innovative and Environmentally Friendly Photocatalysts: A Review

Modern society faces two major challenges: removing pollutants from water and producing energy from renewable sources. To do this, science proposes innovative, low-cost, and environmentally friendly methods. The heterogeneous photocatalysis process fits perfectly in this scenario. In fact, with photocatalysis, it is possible both to mineralize contaminants that are not easily biodegradable and to produce hydrogen from the water splitting reaction or from the conversion of organic substances present in water. However, the main challenge in the field of heterogeneous photocatalysis is to produce low-cost and efficient photocatalysts active under visible light or sunlight. The objective of this review is to compare the new proposals for the synthesis of innovative photocatalysts that reflect the requirements of green chemistry, applied both in the removal of organic contaminants and in hydrogen production. From this comparison, we want to bring out the strengths and weaknesses of the proposals in the literature, but above all, new ideas to improve the efficiency of heterogeneous photocatalysis guaranteeing the principles of environmental and economic sustainability.

Remediation of pesticides using TiO2 based photocatalytic strategies: A review

Nowadays, pesticides are regarded as the most dangerous of the various organic pollutants, posing substantial environmental and human threats worldwide. Pesticide contamination has become one of the most crucial environmental issues due to its bio-persistence and bioaccumulation. Different conventional methods are being utilized for pesticide removal, yet pesticides are thought to be significantly present in the environment. The development and application of sophisticated wastewater treatment methods are being pursued to remove contaminants effectively, particularly pesticides. In the past several decades, nanoscience and nanotechnology have emerged as essential tools for the identification, removal, and mineralization of persistent pesticides by employing advanced nanomaterials such as pristine titanium dioxide (TiO₂), doped TiO₂, nanocomposites (NCs) TiO₂, and ternary nanocomposites (TNCs) TiO₂ by advanced oxidation processes (AOPs). Advancement in the characteristics of TiO₂ by doping, co-doping, construction of NCs and TNCs has contributed to the dramatic efficiency up-gradation by reducing band gap, solar active photocatalyst, enhancing PCA, high photostability, chemically inertness and multiple time reusability. Based on previous literature, utilizing La-TiO₂ NCs photocatalyst, the mineralization of pesticide (imidacloprid) attained up to 98.17% that is almost 40-53% greater than pristine TiO₂. The present review attempt to discuss the recent research performed on TiO₂ based nanoparticles (NPs) and NCs for photocatalytic mineralization of various pesticides. The basic mechanism of TiO₂ photocatalysis, types of reactors used for photocatalysis, and optimized experimental conditions of TiO₂ for pesticides mineralization are discussed.

Heterogeneous Photocatalysis: A Solution for a Greener Earth

Since the beginning of the industrial era, various human activities have steadily increased, leading to rapid technological developments and high population growth [...]