1
|
Sakthivel S, Muthusamy K, Thangarajan AP, Thiruvengadam M, Venkidasamy B. Nano-based biofuel production from low-cost lignocellulose biomass: environmental sustainability and economic approach. Bioprocess Biosyst Eng 2024; 47:971-990. [PMID: 38554183 DOI: 10.1007/s00449-024-03005-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2023] [Accepted: 03/14/2024] [Indexed: 04/01/2024]
Abstract
The use of nanomaterials in biofuel production from lignocellulosic biomass offers a promising approach to simultaneously address environmental sustainability and economic viability. This review provides an overview of the environmental and economic implications of integrating nanotechnology into biofuel production from low-cost lignocellulosic biomass. In this review, we highlight the potential benefits and challenges of nano-based biofuel production. Nanomaterials provide opportunities to improve feedstock pretreatment, enzymatic hydrolysis, fermentation, and catalysis, resulting in enhanced process efficiency, lower energy consumption, and reduced environmental impact. Conducting life cycle assessments is crucial for evaluating the overall environmental footprint of biofuel production. An economic perspective that focuses on the cost implications of utilizing nanomaterials in biofuel production is also discussed. A comprehensive understanding of both environmental and economic dimensions is essential to fully harness the potential of nanomaterials in biofuel production from lignocellulosic biomass and to move towards sustainable future energy.
Collapse
Affiliation(s)
- Selvakumar Sakthivel
- Department of Periodontics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai, 600077, Tamil Nadu, India
- Centre for Marine Science and Technology, Manonmaniam Sundaranar University, Rajakkamangalam, 629502, Tamil Nadu, India
| | - Kanthimathi Muthusamy
- Sri Paramakalyani Centre of Excellence in Environmental Sciences, Manonmaniam Sundaranar University, Alwarkurichi, 627412, Tamil Nadu, India
| | | | - Muthu Thiruvengadam
- Department of Applied Bioscience, College of Life and Environmental Science, Konkuk University, Seoul, 05029, Republic of Korea
- Center for Global Health Research, Saveetha Medical College, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai, 600077, India
| | - Baskar Venkidasamy
- Department of Oral and Maxillofacial Surgery, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai, 600077, Tamil Nadu, India.
| |
Collapse
|
2
|
Sheikh ZUD, Bajar S, Devi A, Rose PK, Suhag M, Yadav A, Yadav DK, Deswal T, Kaur J, Kothari R, Pathania D, Rani N, Singh A. Nanotechnology based technological development in biofuel production: Current status and future prospects. Enzyme Microb Technol 2023; 171:110304. [PMID: 37639935 DOI: 10.1016/j.enzmictec.2023.110304] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/20/2022] [Revised: 07/11/2023] [Accepted: 08/05/2023] [Indexed: 08/31/2023]
Abstract
Depleting fossil fuels and net carbon emissions associated with their burning have driven the need to find alternative energy sources. Biofuels are near-perfect candidates for alternative energy sources as they are renewable and account for no net CO2 emissions. However, biofuel production must overcome various challenges to compete with conventional fuels. Conventional methods for bioconversion of biomass to biofuel include chemical, thermochemical, and biological processes. Substrate selection and processing, low yield, and total cost of production are some of the main issues associated with biofuel generation. Recently, the uses of nanotechnology and nanoparticles have been explored to improve the biofuel production processes because of their high adsorption, high reactivity, and catalytic properties. The role of these nanoscale particles and nanocatalysts in biomass conversion and their effect on biofuel production processes and yield are discussed in the present article. The applicability of nanotechnology in production processes of biobutanol, bioethanol, biodiesel, biohydrogen, and biogas under biorefinery approach are presented. Different types of nanoparticles, and their function in the bioprocess, such as electron transfer, pretreatment, hydrolysis, microalgae cultivation, lipid extraction, dark and photo fermentation, immobilization, and suppression of inhibitory compounds, are also highlighted. Finally, the current and potential applications of nanotechnology in biorefineries are also discussed.
Collapse
Affiliation(s)
- Zaheer Ud Din Sheikh
- Department of Environmental Sciences, Central University of Jammu, Samba, 181143, Jammu and Kashmir, India
| | - Somvir Bajar
- Department of Environmental Science and Engineering, J.C. Bose University of Science and Technology, YMCA, Faridabad, 121006, Haryana, India
| | - Arti Devi
- Department of Environmental Sciences, Central University of Jammu, Samba, 181143, Jammu and Kashmir, India
| | - Pawan Kumar Rose
- Department of Energy and Environmental Sciences, Chaudhary Devi Lal University, Sirsa, 125055, Haryana, India
| | - Meenakshi Suhag
- Institute of Environmental Studies, Kurukshetra University, Kurukshetra, India
| | - Arti Yadav
- Department of Environmental Science & Engineering, Guru Jambheshwar University of Science & Technology, Hisar, 125001, Haryana, India
| | - Deepak Kumar Yadav
- Department of Environmental Science & Engineering, Guru Jambheshwar University of Science & Technology, Hisar, 125001, Haryana, India
| | - Tanuj Deswal
- Department of Nano Science and Materials, Central University of Jammu, Samba, 181143, Jammu and Kashmir, India
| | - Japleen Kaur
- Department of Environmental Sciences, Central University of Jammu, Samba, 181143, Jammu and Kashmir, India
| | - Richa Kothari
- Department of Environmental Sciences, Central University of Jammu, Samba, 181143, Jammu and Kashmir, India
| | - Deepak Pathania
- Department of Environmental Sciences, Central University of Jammu, Samba, 181143, Jammu and Kashmir, India
| | - Neeta Rani
- Department of National Security Studies, Central University of Jammu, Samba, 181143, Jammu and Kashmir, India
| | - Anita Singh
- Department of Environmental Sciences, Central University of Jammu, Samba, 181143, Jammu and Kashmir, India; Department of Environmental Studies, Central University of Haryana, Jant-Pali, Mahendergarh, 12331, Haryana, India.
| |
Collapse
|
3
|
Sherafati A, Moradi S, Mahdavi M. Efficient synthesis of 3-alkyl-2-(-1H-1,2,3-triazolyl)methyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivative via multistep synthesis approach by novel Cu@Py-Oxa@SPION catalyst. BMC Chem 2023; 17:154. [PMID: 37964295 PMCID: PMC10647046 DOI: 10.1186/s13065-023-01072-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2022] [Accepted: 10/30/2023] [Indexed: 11/16/2023] Open
Abstract
In this pared, an efficient method is introduced for the synthesis of 3-alkyl-2-(((4-(2-oxopropyl)-1H-1,2,3-triazol-1-yl)alkyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivatives. These novel products have both 1,2,3-triazole and quinazolinone in their structures. For the synthesis of these products, a novel catalyst is designed, synthesized, and characterized by the immobilization of copper onto modified magnetic iron oxide. The catalyst (denoted: Cu@Py-Oxa@SPION) was characterized by several characterization techniques. In this regard, 16 3-alkyl-2-(((4-(2-oxopropyl)-1H-1,2,3-triazol-1-yl)alkyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivatives were synthesized in high isolated yields (77-86%). As an advantage, the catalyst is highly recoverable and its activity has not decreased after 7 sequential runs. The method is very efficient for the synthesis of the products in high isolated yields under mild reaction conditions in a green solvent. The scope of the method is broad and several examples were successfully synthesized using starting materials with different functional groups.
Collapse
Affiliation(s)
- Alireza Sherafati
- Department of Chemistry Tehran North Branch, Islamic Azad University, Tehran, Iran
| | - Shahram Moradi
- Department of Chemistry Tehran North Branch, Islamic Azad University, Tehran, Iran
| | - Mohammad Mahdavi
- Endocrinology and Metabolism Research Centre, Endocrinology and Metabolism Clinical Sciences Institute, Tehran University of Medical Sciences, Tehran, Iran.
| |
Collapse
|
5
|
Incorporation of Nanocatalysts for the Production of Bio-Oil from Staphylea holocarpa Wood. Polymers (Basel) 2022; 14:polym14204385. [PMID: 36297963 PMCID: PMC9609867 DOI: 10.3390/polym14204385] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/20/2022] [Revised: 10/13/2022] [Accepted: 10/14/2022] [Indexed: 11/30/2022] Open
Abstract
Biomass has been recognized as the most common source of renewable energy. In recent years, researchers have paved the way for a search for suitable biomass resources to replace traditional fossil fuel energy and provide high energy output. Although there are plenty of studies of biomass as good biomaterials, there is little detailed information about Staphylea holocarpa wood (S. holocarpa) as a potential bio-oil material. The purpose of this study is to explore the potential of S. holocarpa wood as a bio-oil. Nanocatalyst cobalt (II) oxide (Co3O4) and Nickel (II) oxide (NiO) were used to improve the production of bio-oil from S. holocarpa wood. The preparation of biofuels and the extraction of bioactive drugs were performed by the rapid gasification of nanocatalysts. The result indicated that the abundant chemical components detected in the S. holocarpa wood extract could be used in biomedicine, cosmetics, and biofuels, and have a broad industrial application prospect. In addition, nanocatalyst cobalt tetraoxide (Co3O4) could improve the catalytic cracking of S. holocarpa wood and generate more bioactive molecules at high temperature, which is conducive to the utilization and development of S. holocarpa wood as biomass. This is the first time that S. holocarpa wood was used in combination with nanocatalysts. In the future, nanocatalysts can be used to solve the problem of sustainable development of biological resources.
Collapse
|
6
|
Cervantes FJ, Ramírez-Montoya LA. Immobilized Nanomaterials for Environmental Applications. MOLECULES (BASEL, SWITZERLAND) 2022; 27:molecules27196659. [PMID: 36235196 PMCID: PMC9572314 DOI: 10.3390/molecules27196659] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/08/2022] [Revised: 09/27/2022] [Accepted: 10/05/2022] [Indexed: 11/16/2022]
Abstract
Nanomaterials (NMs) have been extensively used in several environmental applications; however, their widespread dissemination at full scale is hindered by difficulties keeping them active in engineered systems. Thus, several strategies to immobilize NMs for their environmental utilization have been established and are described in the present review, emphasizing their role in the production of renewable energies, the removal of priority pollutants, as well as greenhouse gases, from industrial streams, by both biological and physicochemical processes. The challenges to optimize the application of immobilized NMs and the relevant research topics to consider in future research are also presented to encourage the scientific community to respond to current needs.
Collapse
|
7
|
Chandel H, Kumar P, Chandel AK, Verma ML. Biotechnological advances in biomass pretreatment for bio-renewable production through nanotechnological intervention. BIOMASS CONVERSION AND BIOREFINERY 2022; 14:1-23. [PMID: 35529175 PMCID: PMC9064403 DOI: 10.1007/s13399-022-02746-0] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/23/2021] [Revised: 04/10/2022] [Accepted: 04/25/2022] [Indexed: 05/05/2023]
Abstract
Globally, the fossil fuel reserves are depleting rapidly and the escalating fuel prices as well as plethora of the pollutants released from the emission of burning fossil fuels cause global warming that massively disturb the ecological balance. Moreover, the unnecessary utilization of non-renewable energy sources is a genuine hazard to nature and economic stability, which demands an alternative renewable source of energy. The lignocellulosic biomass is the pillar of renewable sources of energy. Different conventional pretreatment methods of lignocellulosic feedstocks have employed for biofuel production. However, these pretreatments are associated with disadvantages such as high cost of chemical substances, high load of organic catalysts or mechanical equipment, time consuming, and production of toxic inhibitors causing the environmental pollution. Nanotechnology has shown the promised biorefinery results by overcoming the disadvantages associated with the conventional pretreatments. Recyclability of nanomaterials offers cost effective and economically viable biorefineries processes. Lignolytic and saccharolytic enzymes have immobilized onto/into the nanomaterials for the higher biocatalyst loading due to their inherent properties of high surface area to volume ratios. Nanobiocatalyst enhance the hydrolyzing process of pretreated biomass by their high penetration into the cell wall to disintegrate the complex carbohydrates for the release of high amounts of sugars towards biofuel and various by-products production. Different nanotechnological routes provide cost-effective bioenergy production from the rich repertoires of the forest and agricultural-based lignocellulosic biomass. In this article, a critical survey of diverse biomass pretreatment methods and the nanotechnological interventions for opening up the biomass structure has been carried out.
Collapse
Affiliation(s)
- Heena Chandel
- Department of Biotechnology, School of Basic Sciences, Indian Institute of Information Technology Una, Himachal Pradesh, 177209 India
| | - Prateek Kumar
- Department of Biotechnology, School of Basic Sciences, Indian Institute of Information Technology Una, Himachal Pradesh, 177209 India
| | - Anuj K. Chandel
- Department of Biotechnology, Engineering School of Lorena, University of São, Paulo-12.602.810, Brazil
| | - Madan L. Verma
- Department of Biotechnology, School of Basic Sciences, Indian Institute of Information Technology Una, Himachal Pradesh, 177209 India
| |
Collapse
|