Removal of Organic Dyes from Water and Wastewater Using Magnetic Ferrite-Based Titanium Oxide and Zinc Oxide Nanocomposites: A Review

Enhanced Photocatalytic Activities of Sodium Borohydride-Calcined Magnetic Manganese Ferrite Nanoparticles

The synthesis, enhancement, and maintenance of magnetite-based catalyst nanoparticles (NPs) are important for photocatalytic activity and recovery rates. We used a sodium borohydride (NaBH4) calcination method to modify MnFe2O4 nanoparticles to optimize their performance in the photocatalytic oxidation of 2,5-hydroxymethylfurfural. The results indicated a 94% increase in photocatalytic efficiency, while magnetic assessments performed using a vibrating sample magnetometer showed an 8.9% improvement in magnetic properties without degradation. These findings show the dual benefits of increased photocatalytic performance with strong magnetic properties, which are important for the application and reusability of photocatalysts. The recycling of these photocatalysts reduces secondary pollution and increases the process cost-effectiveness. These results contribute to the solution of problems with the use of photocatalytic materials.

Synergistic effects of β-NaFeO2 ferrite nanoparticles for photocatalytic degradation, antibacterial, and antioxidant applications

Here, synthesis and thorough characterization of β-NaFeO2 nanoparticles utilizing a co-precipitation technique is presented. XRD analysis confirmed a hexagonal-phase structure of β-NaFeO2. SEM revealed well-dispersed spherical nanoparticles with an average diameter of 45 nm. The FTIR spectrum analysis revealed weak adsorption bands at 1054 cm-1 suggested metal-metal bond stretching (Fe-Na). UV-Visible spectroscopy indicates a 4.4 eV optical band gap. Colloidal stability of β-NaFeO2 was evidenced via Zeta potential (-28.5 mV) and Dynamic Light Scattering (DLS) measurements. BET analysis reveals a substantial 343.27 m2 g-1 surface area with mesoporous characteristics. Antioxidant analysis indicates efficacy comparable to standard antioxidants, while concentration-dependent antibacterial effects suggest enhanced efficacy against Gram-positive bacteria, particularly Streptococcus. The Photocatalytic activity of β-NaFeO2 showed significant pollutant degradation (>90% efficiency), with increased degradation rates at higher nanoparticle concentrations, indicating potential for environmental remediation applications.

A comprehensive insight on plasma-catalytic degradation of organic pollutants in water: Comparison between ZnO and TiO2

A novel system combining underwater plasma bubbles and high voltage nanopulses was combined for the first time with ZnO and TiO2 for the degradation of organic pollutants in water. The effect of catalyst loading, discharge power and plasma gas on pollutant degradation was investigated whereas the plasma-catalytic mechanism was explored through the quantification of plasma species, COD/TOC measurements and scavenging experiments in the presence and absence of catalysts. The increased efficiency in the presence of either ZnO or TiO2, especially under plasma gases (air and oxygen) able to produce UV radiation in the range of wavelengths absorbed by both catalysts, lies on the increased concentration of the critical reactive species (e.g. ·O2-, ·ΟΗ, H2O2). Compared to plasma alone process, H2O2 was significantly enhanced in the presence of TiO2 and decreased in the presence of ZnO, whereas ·OH concentration was higher in the plasma-ZnO but lower in the plasma-TiO2 system which supports the overall superior performance of ZnO compared to TiO2. The synergy of plasma-ZnO process compared to that of plasma-TiO2 was ∼2.4 and ∼1.5 times higher for Orange II (OII) and Methylene Blue (MB), respectively, exhibiting a very low electrical energy per order (1.4 kWh m-3 for OII and 0.31 kWh m-3 or MB). The present effort contributes on providing fundamental insights and further expand of plasma-catalysis for water treatment.

Review on magnetic spinel ferrite (MFe2O4) nanoparticles: From synthesis to application

Magnetic spinel ferrite materials offer various applications in biomedical, water treatment, and industrial electronic devices, which has sparked a lot of attention. This review focuses on the synthesis, characterization, and applications of spinel ferrites in a variety of fields, particularly spinel ferrites with doping. Spinel ferrites nanoparticles doped with the elements have remarkable electrical and magnetic properties, allowing them to be used in a wide range of applications such as magnetic fields, microwave absorbers, and biomedicine. Furthermore, the physical properties of spinel ferrites can be modified by substituting metallic atoms, resulting in improved performance. The most recent and noteworthy applications of magnetic ferrite nanoparticles are reviewed and discussed in this review. This review goes over the synthesis, doping and applications of different types of metal ferrite nanoparticles, as well as views on how to choose the appropriate magnetic ferrites based on the intended application.

Enhanced UV-light driven photocatalytic performance of magnetic CoFe2O4/TiO2 nanohybrid for environmental applications

In this work, CoFe₂O₄/TiO₂ nanostructure was prepared through a facile and effective solvothermal route for efficient use in the degradation of the Erionyl Red A-3G model pollutant under ultraviolet irradiation. Characterization analysis indicated the successful heterojunction among the precursors. The composite presented band gap value of 2.75 eV, being smaller than that of the pristine TiO₂, as well as mesoporous structure. The catalytic activity of nanostructure was investigated by employing a 2² factorial experimental design with 3 central points. The optimized reaction conditions were set as pH = 2 and catalyst dosage = 1.0 g L^-1 for an initial pollutant concentration of 20 mg L^-1. The prepared nanohybrid presented remarkable catalytic activity, reaching color removal efficiency of 95.39% after 15 min, as well as total organic carbon (TOC) removal of 69.4% after 120 min. The kinetic studies of TOC removal followed the pseudo-first order model, with a rate constant of 0.10 min^-1. Moreover, the nanostructure presented magnetic behavior, being easily separated from the aqueous medium through the use of a simple external magnetic field.

Enhanced photocatalytic performance of CdFe2O4/Al2O3 nanocomposite for dye degradation

In the present work, CdFe₂O₄/Al₂O₃ magnetic nanocomposite photocatalyst is successfully synthesized by simple sol-gel auto-combustion method. The role of this sample is studied as a photocatalyst. The influence of Al₂O₃ concentration with CdFe₂O₄ on the photocatalytic property is also studied. We have considered three weight percentage of Al₂O₃, 5%, 10%, and 20% with CdFe₂O₄. All the samples are characterized with X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) with selected area electron diffraction (SAED), vibrating sample magnetometer (VSM), UV-Visible, and photoluminescence (PL) spectroscopy techniques. The 10% composite sample showed the lower particle size, higher surface area, enhanced porosity, higher saturation magnetization, and considerable band gap as compared to that of 5% and 20% CdFe₂O₄/Al₂O₃ as well as bare CdFe₂O₄ nanoparticles. The photocatalytic activity of the sample is evaluated towards the degradation of the xylenol orange (XO) dye under UV light. The degradation process of the dye is monitored spectrophotometrically. The performance in terms of removal efficiency is studied by varying the contact time, dye concentration and amount of catalyst. Among the three concentrations of Al₂O₃, the 10% weight concentration of Al₂O₃ with CdFe₂O₄ is found to be the optimal concentration and showed the higher degradation rate. After 30 min photocatalytic reaction, the degradation rate is 92.29% for 10% CdFe₂O₄/Al₂O₃ and for bare CdFe₂O₄, it is 85.79%. This work provides a new reference for designing Al₂O₃-based spinel ferrite nanocomposites and their role in wastewater management.

Impact of Gd3+ doping on structural, electronic, magnetic, and photocatalytic properties of MnFe2O4 nanoferrites and application in dye-polluted wastewater remediation

The present work focuses on developing Gd-doped Mn spinel nanoferrites and their potential application in the photodegradation of water pollutants. The impact of Gd³⁺ ion substitution on structural, electronic, and magnetic characteristics of manganese ferrites has been studied. Nanocrystalline samples of MnGd_xFe_2-xO₄ (x = 0.0 to 0.10, in step size of 0.02) ferrites were prepared via sol-gel self-ignition route. The Rietveld, XPS, HRTEM, and SAED characterization methods confirmed the formation of phase pure ferrite nanoparticles (~ 8-22 nm) in the cubic spinel structure. The Gd³⁺ content in these nanoferrites responded to a systematic reduction in the size of nanocrystallites and an upsurge in the density of nanoferrites. The XPS study revealed fine assimilation of constituent elements in the fcc lattice and ruled out impurities in the nanoferrites. The Fe and the Gd ions were found to be in Fe³⁺ and Gd³⁺ states, respectively. While a major fraction of the Mn ions were found to be in the Mn²⁺ state, a small fraction of Mn⁴⁺ ions was observed on the surface of nanoparticles. The nanoferrites were found to exhibit a soft ferromagnetic state from 300 to 20 K limits. The highest saturation magnetization was observed for x = 0.02 (M_S = 66.6 emu/g at 20 K). The observed magnetic properties can be understood with the competing (Fe³⁺ and Mn²⁺)_A-O^2--[Fe³⁺, Mn²⁺, and Gd³⁺]_B superexchange interactions and magnetocrystalline anisotropy. Due to the small band gap energy of Gd-doped Mn ferrites than that of the pure Mn ferrite, they have demonstrated excellent photocatalytic activity for the degradation of methylene blue (MB) dye under visible light illumination. As much as 96.35% of the MB dye was found to get degraded in 70 min of light illumination over synthesized nanoparticles and the photodegradation reaction followed pseudo-first-order kinetics. The increased optical absorbance due to lower band gap, suppressed recombination rate of charge carriers, and enhanced charge mobility make them effective visible light active photocatalysts. This study revealed that the electronic, optical, and magnetic properties of MnFe₂O₄ nanoferrites could be easily tuned by varying the Gd³⁺ content and the prepared Gd-doped MnFe₂O₄ nanomaterials have boundless potential to be utilized in the future making promising active photocatalysts and degradation of harmful industrial dyes for enhanced protection in the fields of environment and health care.