Preparation of Fe3O4/TiO2/C Nanocomposites and Their Application in Fenton-Like Catalysis for Dye Decoloration

Activated Carbon Assisted Fenton-like Treatment of Wastewater Containing Acid Red G

The Fenton reaction as an effective advanced oxidation technology has been widely used in wastewater treatment for its stable effluent quality, simple operation, mild condition, and higher organic degradation with non-selectivity. However, the traditional Fenton reaction is limited by the sluggish regeneration of Fe2+, resulting in a slower reaction rate, and it is necessary to further increase the dosage of Fe2+, which will increase the production of iron sludge. Activated carbon (AC) has a strong adsorption property, and it cannot be ignored that it also can reduce Fe3+. In this study, the degradation of acid red G (ARG) by adding AC to the Fe3+/H2O2 system, the role of the reducing ability, and the reason why AC can reduce Fe3+ were studied. By adding three kinds of ACs, including coconut shell-activated carbon (CSPAC), wood-activated carbon (WPAC), and coal-activated carbon (CPAC), the ability of ACs to assist the Fe3+/H2O2 Fenton-like system to degrade ARG was clarified. Through the final treatment effect and the ability to reduce Fe3+, the type of AC with the best promotion effect was CSPAC. The different influence factors of particle size, the concentration of CSPAC, concentration of H2O2, concentration of Fe3+, and pH value were further observed. The best reaction conditions were determined as CSPAC powder with a particle size of 75 μm and dosage of 0.6 g/L, initial H2O2 concentration of 0.4 mmol/L, Fe3+ concentration of 0.1 mmol/L, and pH = 3. By reducing the adsorption effect of CSPAC, it was further observed that CSPAC could accelerate the early reaction rate of the degradation process of ARG by the Fe3+/H2O2 system. FT-IR and XPS confirmed that the C-O-H group on the surface of CSPAC could reduce Fe3+ to Fe2+. This study can improve the understanding and role of AC in the Fenton reaction, and further promote the application of the Fenton reaction in sewage treatment.

Enhanced photocatalytic activity of efficient magnetically recyclable core-shell nanocomposites on 2,2',4,4',5,5'-hexachlorobiphenyl (PCB 153) degradation under UV-LED irradiation

The congener polychlorinated biphenyls (PCBs) are one of the of persistent organic pollutant compounds that increase lifestyle-related diseases, such as diabetes, obesity, and cancer. So, 2,2',4,4',5,5'-hexachlorobiphenyl (PCB153), which is one of the most common PCB contaminants in nature, was selected as a model compound to study the photocatalytic degradation of Fe₃O₄@SiO₂@TiO₂ core-shell structure. In this work, Fe₃O₄@SiO₂@TiO₂ nanocomposite was synthesized and characterized using transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), energy-dispersive X-ray (EDS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and vibrating sample magnetometer (VSM) techniques. Then, the effect of parameters such as catalyst dosage, initial concentration of PCB 153, solution pH, amount of H₂O₂, and kind of co-solvent on photocatalytic degradation of PCB 153 by the synthesized nanocomposite was investigated. The high degradation efficiency of Fe₃O₄@SiO₂@TiO₂ nanocomposite, which was 96.5%, was obtained at 4 g/l of the catalysts, 4 ppm of PCB 153, pH 5, 20 mM H₂O₂, 2 h of reaction time, and acetone as a cosolvent. Also, the rate of mineralization for Fe₃O₄@SiO₂@TiO₂ nanocomposite with H₂O₂ and UV-LED irradiation was 75.3% which had a significant efficiency compared to control experiments. Moreover, the mentioned photocatalysts are possible to be reused through exposing to external magnetic field, with insignificant decrease in the catalytic activity even after 6 cycles. The photocatalytic degradation process has an effective and environmental friendly effect on the degradation of organic pollutants.

Visible-Light-Driven Bio-Templated Magnetic Copper Oxide Composite for Heterogeneous Photo-Fenton Degradation of Tetracycline

The development of a visible-light-driven, reusable, and long-lasting catalyst for the heterogeneous photo-Fenton process is critical for practical application in the treatment of contaminated water. This study focuses on synthesizing a visible-light-driven heterogenous bio-templated magnetic copper oxide composite (Fe3O4/CuO/C) by a two-step process of bio-templating and hydrothermal processes. The prepared composite was characterized by field emission-scanning electron microscope (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), electrical impedance spectroscopy (EIS), and vibrating sample magnetometer (VSM). The results reveal that the prepared composite retains the template’s (corn stalk’s) original porous morphology, and a substantial amount of CuO and Fe3O4 particles are loaded onto the surface of the template. The prepared Fe3O4/CuO/C composite was employed as a catalyst for heterogeneous photo-Fenton degradation of tetracycline (TC) irradiated by visible light. The prepared Fe3O4/CuO/C catalyst has high efficiency towards TC degradation within 60 min across a wide pH range irradiated by visible light, which is attributed to its readily available interfacial boundaries, which significantly improves the movement of photoexcited electrons across various components of the prepared composite. The influence of other parameters such as initial H2O2 concentration, initial concentration of TC, and catalyst dosages was also studied. In addition to high efficiency, the prepared catalyst’s performance was sustained after five cycles, and its recovery is aided by the use of an external magnetic field. This research paper highlights the development of a heterogeneous catalyst for the elimination of refractory organic compounds in wastewater.

A High-Efficient Carbon-Coated Iron-Based Fenton-Like Catalyst with Enhanced Cycle Stability and Regenerative Performance

Carbon coated iron-based Fenton-like catalysts are now widely studied in wastewater treatment. However, their poor stability is still a big challenge and the related regenerative performance is seldom investigated. Herein, a carbon-coated Fe3O4 on carbon cloth (cc/Fe3O4@C) was prepared with glucose as carbon source via electrodeposition and ethanol solvothermal methods. An amorphous carbon layer with polar C-groups covers the surface of Fe3O4, which presents a flaky cross-linked network structure on the carbon cloth (cc). The cc/Fe3O4@C exhibits an improved catalytic activity with nearly 84% phenol was removed within 35 min with polar C-groups. What’s more, around 80% phenol can still be degraded in 120 min after 14 degradation cycles. After the regeneration treatment, the degradation performance was restored to the level of the fresh in the first two regenerations. The enhanced cycle stability and regeneration performance of the catalyst are as follows: Firstly, the catalyst’s composition and structure were recovered; Secondly, the reduction effect of the amorphous carbon layer ensuring timely supplement of Fe2+ from Fe3+. Also, the carbon layer reduces Fe leaching during the Fenton-like process.

Green Fabrication of Tannic Acid-Inspired Magnetic Composite Nanoparticles toward Cationic Dye Capture and Selective Degradation

An environmental strategy for developing sustainable materials presents an attractive prospect for wastewater remediation. Herein, a facile, green, and economical strategy is proposed to fabricate magnetic composite nanoparticles (NPs) toward cationic dye adsorption and selective degradation. To prepare the composite TiO2-PEI-TA@Fe3O4 NPs, tannic acid (TA) and polyethyleneimine (PEI) were first used to decorate Fe3O4 NPs at aqueous solution, and then TiO2 NPs were anchored onto the surfaces of Fe3O4 NPs based on the catecholamine chemistry. The chemical composition and microstructure of the obtained NPs were systematically characterized. The NPs not only exhibited adsorption ability for the cationic dye of methylene blue (MB) but also responded to ultraviolet light to selectively degrade the adsorbed MB, and the removal (adsorption and/or degradation) ratio for MB could reach 95%. In addition, cyclic experiments showed that the removal ratio of the composite NPs for MB could still be maintained more than 85% even after five cycles. Given by the above-mentioned advantages, such a green and facile strategy for combining the adsorption and degradation methods to construct magnetic nanocomposites exhibits potential applications in cationic dye selective removal and sustainable wastewater remediation.

Biochar-Supported FeS/Fe3O4 Composite for Catalyzed Fenton-Type Degradation of Ciprofloxacin

The Fenton-type oxidation catalyzed by iron minerals is a cost-efficient and environment-friendly technology for the degradation of organic pollutants in water, but their catalytic activity needs to be enhanced. In this work, a novel biochar-supported composite containing both iron sulfide and iron oxide was prepared, and used for catalytic degradation of the antibiotic ciprofloxacin through Fenton-type reactions. Dispersion of FeS/Fe3O4 nanoparticles was observed with scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) and transmission electron microscopy (TEM). Formation of ferrous sulfide (FeS) and magnetite (Fe3O4) in the composite was validated by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Ciprofloxacin (initial concentration = 20 mg/L) was completely degraded within 45 min in the system catalyzed by this biochar-supported magnetic composite at a dosage of 1.0 g/L. Hydroxyl radicals (·OH) were proved to be the major reactive species contributing to the degradation reaction. The biochar increased the production of ·OH, but decreased the consumption of H2O2, and helped transform Fe3+ into Fe2+, according to the comparison studies using the unsupported FeS/Fe3O4 as the catalyst. All the three biochars prepared by pyrolysis at different temperatures (400, 500 and 600 °C) were capable for enhancing the reactivity of the iron compound catalyst.

Facile self-assembly synthesis of γ-Fe2O3 /graphene oxide for enhanced photo-Fenton reaction

A novel self-assembly method was developed to prepare a γ-Fe₂O₃/graphene oxide (GO) heterogeneous catalyst that showed excellent synergy between photocatalysis and Fenton-like reactions. The γ-Fe₂O₃/GO catalyst prepared on the iron plates demonstrated efficient and reproducible catalytic activities for water treatment. It takes only 80 min to degrade 50 mg L^-1 methylene (MB) completely, which is the main non-biodegradable dye in wastewater from the textile industry. The heterogeneous catalyst is stable over a wide range of pH (from 2.0 to 10.2) for MB degradation, and can be easily extracted from solution and repeatedly used with little loss of catalytic activity. The high activity and stability of the catalyst system can be attributed to charge separation between γ-Fe₂O₃ and GO, which could accelerate Fenton-like process and photocatalysis. In addition, the dominant reactive oxidant species responsible for the MB degradation, including the hydroxyl radicals (•OH) and holes (h⁺), were trapped on the surface of the γ-Fe₂O₃/GO composite, as proved by a free-radical quenching experiment. The γ-Fe₂O₃/GO heterogeneous catalyst could potentially provide a solution for removal of non-biodegradable dyes from wastewater in the textile industry.