Engineering Surface Ligands of Noble Metal Nanocatalysts in Tuning the Product Selectivity

Gaussian attractive potential for carboxylate/cobalt surface interactions

Ligand-decorated metal surfaces play a pivotal role in various areas of chemistry, particularly in selective catalysis. Molecular dynamics simulations at the molecular mechanics level of theory are best adapted to gain complementary insights to experiments regarding the structure and dynamics of such organic films. However, standard force fields tend to capture only weak physisorption interactions. This is inadequate for ligands that are strongly adsorbed such as carboxylates on metal surfaces. To address this limitation, we employ the Gaussian Lennard-Jones (GLJ) potential, which incorporates an attractive Gaussian potential between the surface and ligand atoms. Here, we develop this approach for the interaction between cobalt surfaces and carboxylate ligands. The accuracy of the GLJ approach is validated through the analysis of the interaction of oxygen with two distinct cobalt surfaces. The accuracy of this method reaches a root mean square deviation (RMSD) of about 3 kcal/mol across all probed configurations, which corresponds to a percentage error of roughly 4%. Application of the GLJ force field to the dynamics of the organic layer on these surfaces reveals how the ligand concentration influences the film order, and highlights differing mobility in the x and y directions, attributable to surface corrugation on Co(112̄0). GLJ is versatile, suitable for a broad range of metal/ligand systems, and can, subsequently, be utilized to study the organic film on the adsorption/desorption of reactants and products during a catalytic process.

Why surface hydrophobicity promotes CO2 electroreduction: a case study of hydrophobic polymer N-heterocyclic carbenes

We report the use of polymer N-heterocyclic carbenes (NHCs) to control the microenvironment surrounding metal nanocatalysts, thereby enhancing their catalytic performance in CO2 electroreduction. Three polymer NHC ligands were designed with different hydrophobicity: hydrophilic poly(ethylene oxide) (PEO-NHC), hydrophobic polystyrene (PS-NHC), and amphiphilic block copolymer (BCP) (PEO-b-PS-NHC). All three polymer NHCs exhibited enhanced reactivity of gold nanoparticles (AuNPs) during CO2 electroreduction by suppressing proton reduction. Notably, the incorporation of hydrophobic PS segments in both PS-NHC and PEO-b-PS-NHC led to a twofold increase in the partial current density for CO formation, as compared to the hydrophilic PEO-NHC. While polymer ligands did not hinder ion diffusion, their hydrophobicity altered the localized hydrogen bonding structures of water. This was confirmed experimentally and theoretically through attenuated total reflectance surface-enhanced infrared absorption spectroscopy and molecular dynamics simulation, demonstrating improved CO2 diffusion and subsequent reduction in the presence of hydrophobic polymers. Furthermore, NHCs exhibited reasonable stability under reductive conditions, preserving the structural integrity of AuNPs, unlike thiol-ended polymers. The combination of NHC binding motifs with hydrophobic polymers provides valuable insights into controlling the microenvironment of metal nanocatalysts, offering a bioinspired strategy for the design of artificial metalloenzymes.

Specific and Long-Term Luminescent Monitoring of Hydrogen Peroxide in Tumor Metastasis

Luminescent monitoring of endogenous hydrogen peroxide (H₂ O₂ ) in tumors is conducive to understanding metastasis and developing novel therapeutics. The clinical transformation is obstructed by the limited light penetration depth, toxicity of nano-probes, and lack of long-term monitoring modes of up to days or months. New monitoring modes are introduced via specific probes and implantable devices, which can achieve real-time monitoring with a readout frequency of 0.01 s or long-term monitoring for months to years. Near-infrared dye-sensitized upconversion nanoparticles (UCNPs) are fabricated as the luminescent probes, and the specificity to reactive oxygen species is subtly regulated by the self-assembled monolayers on the surfaces of UCNPs. Combined with the passive implanted system, a 20-day monitoring of H₂ O₂ in the rat model of ovarian cancer with peritoneal metastasis is achieved, in which the limited light penetration depth and toxicity of nano-probes are circumvented. The developed monitoring modes show great potential in accelerating the clinical transformation of nano-probes and biochemical detection methods.

Surface functionalization of inorganic nanoparticles with ligands: a necessary step for their utility

The importance of protecting inorganic nanoparticles with organic ligands and thus imparting the needed stabilization as colloidal dispersions for their potential applications is highlighted in this review.

Temperature-Dependent Activity of Gold Nanocatalysts Supported on Activated Carbon in Redox Catalytic Reactions: 5-Hydroxymethylfurfural Oxidation and 4-Nitrophenol Reduction Comparison

In this study, the temperature-dependent activity of Au/AC nanocatalysts in redox catalytic reactions was investigated. To this end, a series of colloidal gold catalysts supported on activated carbon and titania were prepared by the sol immobilization method employing polyvinyl alcohol as a polymeric stabilizer at different hydrolysis degrees. The as-synthesized materials were widely characterized by spectroscopic analysis (XPS, XRD, and ATR-IR) as well as TEM microscopy and DLS/ELS measurements. Furthermore, 5-hydroxymethylfurfural (HMF) oxidation and 4-nitrophenol (4-NP) reduction were chosen to investigate the catalytic activity as a model reaction for biomass valorization and wastewater remediation. In particular, by fitting the hydrolysis degree with the kinetic data, volcano plots were obtained for both reactions, in which the maximum of the curves was represented relative to hydrolysis intermediate values. However, a comparison of the catalytic performance of the sample Au/AC_PVA-99 (hydrolysis degree of the polymer is 99%) in the two reactions showed a different catalytic behavior, probably due to the detachment of polymer derived from the different reaction temperature chosen between the two reactions. For this reason, several tests were carried out to investigate deeper the observed catalytic trend, focusing on studying the effect of the reaction temperature as well as the effect of support (metal–support interaction) by immobilizing Au colloidal nanoparticles on commercial titania. The kinetic data, combined with the characterization carried out on the catalysts, confirmed that changing the reaction conditions, the PVA behavior on the surface of the catalysts, and, therefore, the reaction outcome, is modified.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Self-assembled monolayer protection of chiral-imprinted mesoporous platinum electrodes for highly enantioselective synthesis

In modern chemistry, chiral (electro)catalysis is a powerful strategy to produce enantiomerically pure compounds (EPC). However, it still struggles with uncontrollable stereochemistry due to side reactions, eventually producing a racemic mixture. To overcome this important challenge, a well-controlled design of chiral catalyst materials is mandatory to produce enantiomers with acceptable purity. In this context, we propose the synergetic combination of two strategies, namely the elaboration of mesoporous Pt films, imprinted with chiral recognition sites, together with the spatially controlled formation of a self-assembled monolayer. Chiral imprinted metals have been previously suggested as electrode materials for enantioselective recognition, separation and synthesis. However, the outermost surface of such electrodes is lacking chiral information and thus leads to unspecific reactions. Functionalising selectively this part of the electrode with a monolayer of organosulfur ligands allows an almost total suppression of undesired side reactions and thus leads to a boost of enantiomeric excess to values of over 90% when using these surfaces in the frame of enantioselective electrosynthesis. In addition, this strategy also decreases the total reaction time by one order of magnitude. The study therefore opens up promising perspectives for the development of heterogeneous enantioselective electrocatalysis strategies.

Nitrogen-Doped Carbon Enables Heterogeneous Asymmetric Insertion of Carbenoids into Amines Catalyzed by Rhodium Nanoparticles

Development of stable heterogeneous catalyst systems is a crucial subject to achieve sustainable society. Though metal nanoparticles are robust species, the study of asymmetric catalysis by them has been restricted because methods to activate metal nanoparticles without causing metal leaching were limited. We developed Rh nanoparticle catalysts (NCI-Rh) supported on nitrogen-doped carbon as a solid ligand to interact with metals for asymmetric insertion of carbenoids into N-H bonds cocatalyzed by chiral phosphoric acid. Nitrogen dopants played a crucial role in both catalytic activity and enantioselectivity while almost no catalysis was observed with Rh nanoparticles immobilized on supports without nitrogen dopants. Various types of chiral α-amino acid derivatives were synthesized in high yields with high enantioselectivities and NCI-Rh could be reused in seven runs. Furthermore, we demonstrated the corresponding continuous-flow reaction using a column packed with NCI-Rh. The desired product was obtained efficiently for over 90 h through the reactivation of NCI-Rh and the chiral source could be recovered.

Effect of Polyvinyl Alcohol Ligands on Supported Gold Nano-Catalysts: Morphological and Kinetics Studies

The effect of polyvinyl alcohol (PVA) stabilizers and gold nanoparticles supported on active carbon (AuNPs/AC) was investigated in this article. Polymers with different molecular weights and hydrolysis degrees have been synthesized and used, like the stabilizing agent of Au nano-catalysts obtained by the sol-immobilization method. The reduction of 4-nitrophenol with NaBH4 has been used as a model reaction to investigate the catalytic activity of synthesized Au/AC catalysts. In addition, we report several characterization techniques such as ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) in order to correlate the properties of the polymer with the metal nanoparticle size and the catalytic activity. A volcano plot was observed linking the catalytic performance with hydrolysis degree and the maximum of the curve was identified at a value of 60%. The Au:PVA-60 weight ratio was changed in order to explain how the amount of the polymer can influence catalytic properties. The effect of nitroaromatic ring substituents on the catalytic mechanism was examined by the Hammett theory. Moreover, the reusability of the catalyst was investigated, with little to no decrease in activity observed over five catalytic cycles. Morphological and kinetic studies reported in this paper reveal the effect of the PVA polymeric stabilizer properties on the size and catalytic activity of supported gold nanoparticles.

A Polymer Solution To Prevent Nanoclustering and Improve the Selectivity of Metal Nanoparticles for Electrocatalytic CO2 Reduction

The stability of metal nanocatalysts for electrocatalytic CO₂ reduction is of key importance for practical application. We report the use of two polymeric N-heterocyclic carbenes (NHC) (polydentate and monodentate) to stabilize metal nanocatalysts (Au and Pd) for efficient CO₂ electroreduction. Compared with other conventional ligands including thiols and amines, metal-carbene bonds that are stable under reductive potentials prevent the nanoclustering of nanoparticles. Au nanocatalysts modified by polymeric NHC ligands show an activity retention of 86 % after CO₂ reduction at -0.9 V for 11 h, while it is less than 10 % for unmodified Au. We demonstrate that the hydrophobicity of polymer ligands and the enriched surface electron density of metal NPs through σ-donation of NHCs substantially improve the selectivity for CO₂ reduction over proton.

Crystalline Facet-Directed Generation Engineering of Ultrathin Platinum Nanodendrites

In this work, we successfully prepare two-dimensional ultrathin single-crystalline platinum nanodendrites (PtNDs) with precisely controlled generation (size) through a surfactant-directed solution-phase synthesis. The amphiphilic surfactant of C₂₂H₄₅-N⁺(CH₃)₂CH₂COOH (Br^-) acts as the structure-directing template and facet-capping agent simultaneously to kinetically engineer in-the-plane epitaxial growth of Pt nanocrystals along selectively exposed {111} facets into ultrathin PtNDs. A novel formation mechanism defined as crystalline facet-directed step-by-step in-the-plane epitaxial growth, similar to the synthesis of organic dendrimers, is proposed on the basis of the nanostructure and crystalline evolution of PtNDs. The generation growth process is readily extended to precisely engineer the generation of PtNDs (from 0 to 25) and can also be utilized to grow other noble metal NDs (e.g., PdNDs and AuNDs) and core-shell Pt-Pd NDs. Because of the structural advantages, ultrathin PtNDs exhibit enhanced electrocatalytic performance toward hydrogen evolution reaction.

Shape selection through epitaxy of supported platinum nanocrystals

Supported nanocrystals of original shapes are highly desirable for the development of optimized catalysts; however, conventional methods for the preparation of supported catalysts do not allow shape control. In this work, we have synthesized concave platinum nanocubes exposing {110} crystallographic facets at 20 °C. In the presence of a crystallographically oriented Pt(111) support in the reaction medium, the concave nanocubes grow epitaxially on the support, producing macroscopic nanostructured surfaces. Higher reaction temperature produces a mixture of different nanostructures in solution; however, only the nanostructures growing along the 111 direction are obtained on the Pt(111) support. Therefore, the oriented surface acts as a template for a selective immobilization of specific nanostructures out of a mixture, which can be regarded as an "epitaxial resolution" of an inhomogeneous mixture of nanocrystals. Thus, a judicious choice of the support crystallographic orientation may allow the isolation of original nanostructures that cannot be obtained in a pure form.

Encapsulation of Metal Nanoparticle Catalysts Within Mesoporous Zeolites and Their Enhanced Catalytic Performances: A Review

Metal nanoparticles (NPs) exhibit desired activities in various catalytic reactions. However, the aggregation and sintering of metal NPs usually cause the loss of catalytic performance in practical reaction processes. Encapsulation of catalytically active metal NPs on/within a high-surface-area inorganic support partially resolve such concerns. Microporous zeolites, owing to their rigid frameworks and porous structural features, have been considered as one of ideal inorganic supports. Metal NPs can be easily encapsulated and stabilized within zeolitic frameworks to prevent unwished aggregation during the catalysis. Unfortunately, sole microporous nanochannels (generally <1 nm) in conventional zeolites are not easy to be accessed. The introduction of another set of nanochannel (e.g., mesopore), known as mesoporous zeolites, can greatly improve the mass-transfer efficiency, which is structurally beneficial for most catalytic reactions. The coexistence of micropores and mesopores in inorganic supports provides the synergetic advantages of both fine confinement effect for metal NPs and easy diffusion for organic reactants/intermediates/products. This review focuses on the recent advances in the design and synthesis of mesoporous zeolites-encapsulated metal NP catalysts as well as their desired catalytic performances (activity and stability) in organic reactions. We first discuss the advantages of mesoporous zeolites as the supports and present general strategies for the construction of mesoporous zeolites. Then, the preparation methods on how to encapsulate NP catalysts within both microporous and mesoporous zeolites are clearly demonstrated. Third, some recent important cases on catalytic applications are presented to verify structural advantages of mesoporous zeolite supports. Within the conclusion, the perspectives on future developments in metal NP catalysts encapsulated within mesoporous zeolites are lastly discussed.

Gold nanocatalysts supported on carbon for electrocatalytic oxidation of organic molecules including guanines in DNA

Gold (Au) is chemically stable and resistant to oxidation. Although bulk Au is catalytically inert, nanostructured Au exhibits unique size-dependent catalytic activity. When Au nanocatalysts are supported on conductive carbon (denoted as Au@C), Au@C becomes promising for a wide range of electrochemical reactions such as electrooxidation of alcohols and electroreduction of carbon dioxide. In this mini-review, we summarize Au@C nanocatalysts with specific attention on the most recent achievements including the findings in our own laboratories, and show that Au nanoclusters (AuNCs, <2 nm) on nitrided carbon are excellent electrocatalysts for the oxidation of organic molecules including guanines in DNA. The state-of-the-art synthesis and characterization of these nanomaterials are also documented. Synergistic interactions among Au-containing multicomponents on carbon supports and their applications in electrocatalysis are discussed as well. Finally, challenges and future outlook for these emerging and promising nanomaterials are envisaged.

Topotactic Transformation of Solvated MgCr-LDH Nanosheets to Highly Efficient Porous MgO/MgCr2O4 Nanocomposite for Photocatalytic H2 Evolution

The hybrid structure of nanoparticles (NPs) with nanosheets has the advantage of both anisotropic properties of NPs and large specific surface areas of nanosheets, which is desirable for many technological applications. In this study, MgCr₂O₄ spinel NPs decorated on highly porous MgO nanosheets forming MgO/MgCr₂ O₄( x) nanocomposites were synthesized by a one pot coprecipitation method followed by a heat treatment process of the solvated wet gel of MgCr-LDH with polar solvent N, N-dimethylformamide (DMF) at 400 °C. This novel synthetic methodology generates materials consisting of porous metal oxides nanosheets adhered with spinel phase NPs due to the slow generation of gases such as H₂O, CO₂, and NH₃ under moderate temperature during the heat treatment process. The synergistic effect of much wider band gap MgO nanosheets and narrow band gap MgCr₂O₄ NPs added increased stability due to the stronger bonding coordination of MgCr₂O₄ NPs with MgO nanosheets. The obtained MgO/MgCr₂ O₄( x) nanocomposites possess large specific surface areas, highly porous structure, and excellent interface between MgCr₂O₄ NPs and MgO nanosheets, which proved from N₂ sorption isotherm, TEM, HR-TEM study. With metallic ratio of MgCr3:1, MgO/MgCr₂O₄(MgCr3:1) nanocomposites exhibit highest H₂ evolution rate of 840 μmolg^-12h^-1, which was 2 times higher than that of pure MgCr₂O₄(420 μmolg^-12h^-1). The LSV measurement study of MgO/MgCr₂O₄ (MgCr3:1) nanocomposite shows an enhancement of light current density of 0.22 μA/cm² at potential bias of -1.1 V. The Mott-Schottky analysis suggested the band edge positions of the n-type constituents and formation of n-n type heterojunctions in MgO/MgCr₂O₄ (MgCr3:1) nanocomposite, which facilitates the flow of charge carriers. The EIS and Bode phase plot of MgO/MgCr₂O₄ (MgCr3:1) nanocomposite signifies the lower interfacial charge transfer resistance and higher lifetime of electrons (2.7 ms) for enhanced H₂ production. Lastly, the enhanced photocatalytic H₂ production activity and long-term stability of MgO/MgCr₂O₄(MgCr3:1) could be attributed to maximum specific surface area, porous structure, close intimacy contact angle between two cubic phases of MgCr₂O₄ NPs and MgO nanosheets, abundant oxygen vacancies sites, reduced charge transfer resistance and suitable band edge potential to drive the thermodynamic energy for H₂ production. This work highlighted an effective strategy for the synthesis of cost-effective 2D porous heterojunctions nanocomposite photocatalyst for promising applications in the field of clean H₂ production utilizing abundant solar energy.

Nanoengineering of aggregation-free and thermally-stable gold nanoparticles in mesoporous frameworks

Loading catalytically active, aggregation-free and thermally stable metal nanoparticles (NPs) on a high surface area support represents a major interest in heterogeneous catalysis. Current synthetic approaches to these hybrid catalysts, however, still lack controllability in the thermal stability of metal NPs, particularly at high temperatures in the absence of organic ligands. We herein report a facile "co-assembly" methodology to prepare aggregation-free, ligand-free and thermally stable mesoporous hybrid nanocatalysts of metal-oxides and metal-carbons. Immobilization of catalytically active gold NPs (AuNPs) within high surface area mesoporous frameworks was achieved via the polymer-directed co-assembly of chemically and structurally equivalent Pluronic P-123 and poly(ethylene oxide)-modified metallic gold NPs (AuNP-PEO) as co-structure-directing-agents. The in situ immobilization of AuNPs partially embedded into periodically ordered mesoporous frameworks imposed a three-dimensional "nanoconfinement" effect and essentially enhanced the long-term thermal stability of AuNPs up to 800 °C. The mesoporous hybrids retained a high surface accessibility of AuNPs and they had a fantastic high-temperature catalytic durability (>130 h at 375 °C) confirmed by two model catalytic reactions, including aerobic oxidation of benzyl alcohol and CO oxidation, respectively. Our results may offer a new realm of possibilities for the rational applications of thermally stable nanocatalysts in renewable energy technology and high-temperature catalysis.