Immobilization Effects on the Catalytic Properties of Two Fusarium Verticillioides Lipases: Stability, Hydrolysis, Transesterification and Enantioselectivity Improvement

Support Enzyme Loading Influences the Effect of Aldehyde Dextran Modification on the Specificity of Immobilized Ficin for Large Proteins

It has been reported that the modification of immobilized glyoxyl-ficin with aldehyde dextran can promote steric hindrances that greatly reduce the activity of the immobilized protease against hemoglobin, while the protease still maintained a reasonable level of activity against casein. In this paper, we studied if this effect may be different depending on the amount of ficin loaded on the support. For this purpose, both the moderately loaded and the overloaded glyoxyl-ficin biocatalysts were prepared and modified with aldehyde dextran. While the moderately loaded biocatalyst had a significantly reduced activity, mainly against hemoglobin, the activity of the overloaded biocatalyst was almost maintained. This suggests that aldehyde dextran was able to modify areas of the moderately loaded enzyme that were not available when the enzyme was overloaded. This modification promoted a significant increase in biocatalyst stability for both biocatalysts, but the stability was higher for the overloaded biocatalyst (perhaps due to a combination of inter- and intramolecular crosslinking).

An Insight in Developing Carrier-Free Immobilized Enzymes

Enzymes play vital roles in all organisms. The enzymatic process is progressively at its peak, mainly for producing biochemical products with a higher value. The immobilization of enzymes can sometimes tremendously improve the outcome of biocatalytic processes, making the product(s) relatively pure and economical. Carrier-free immobilized enzymes can increase the yield of the product and the stability of the enzyme in biocatalysis. Immobilized enzymes are easier to purify. Due to these varied advantages, researchers are tempted to explore carrier-free methods used for the immobilization of enzymes. In this review article, we have discussed various aspects of enzyme immobilization, approaches followed to design a process used for immobilization of an enzyme and the advantages and disadvantages of various common processes used for enzyme immobilization.

Characterization of free and immobilized lipase from Penicillium sp. onto three modified bentonites: A comparative study

The present work was conducted to investigate the immobilization of lipase from Penicillium sp. onto three modified bentonites by simple adsorption and crosslinking methods. The composites were characterized by FTIR, SEM and BET. The free and bentonite-supported lipase was evaluated in terms of operational and storage stability and pH and thermal activity and stability. The kinetic parameters were also evaluated. The results show that all immobilized enzymes had better thermal and pH stability compared to free enzymes. Among the immobilized enzymes, GDU-bent-lipase had more efficient performance in thermal (38% of its initial activity within 24 h at 65 °C), operational (70% residual activity after 9 cycles), storage stability (70.14% of its initial activities at 4 °C for 21 days), and kinetic properties (effectiveness factor 0.79 relative to free enzyme) than free and other immobilized enzymes. The adsorption isotherm was modeled by Langmuir, Freundlich and Temkin isotherms which Langmuir isotherm indicated a better fit of the experimental adsorption data. To the best of our knowledge, this is the first comparative report about the immobilization of lipase Produced by Penicillium sp., isolated from olive mill wastewater, and the most comprehensive study about the immobilization of lipase onto several supports.

Production and Characterization of Cross-Linked Aggregates of Geobacillus thermoleovorans CCR11 Thermoalkaliphilic Recombinant Lipase

Immobilization of enzymes has many advantages for their application in biotechnological processes. In particular, the cross-linked enzyme aggregates (CLEAs) allow the production of solid biocatalysts with a high enzymatic loading and the advantage of obtaining derivatives with high stability at low cost. The purpose of this study was to produce cross-linked enzymatic aggregates (CLEAs) of LipMatCCR11, a 43 kDa recombinant solvent-tolerant thermoalkaliphilic lipase from Geobacillus thermoleovorans CCR11. LipMatCCR11-CLEAs were prepared using (NH4)2SO4 (40% w/v) as precipitant agent and glutaraldehyde (40 mM) as cross-linker, at pH 9, 20 °C. A U10(56) uniform design was used to optimize CLEA production, varying protein concentration, ammonium sulfate %, pH, glutaraldehyde concentration, temperature, and incubation time. The synthesized CLEAs were also analyzed using scanning electron microscopy (SEM) that showed individual particles of <1 µm grouped to form a superstructure. The cross-linked aggregates showed a maximum mass activity of 7750 U/g at 40 °C and pH 8 and retained more than 20% activity at 100 °C. Greater thermostability, resistance to alkaline conditions and the presence of organic solvents, and better durability during storage were observed for LipMatCCR11-CLEAs in comparison with the soluble enzyme. LipMatCCR11-CLEAs presented good reusability by conserving 40% of their initial activity after 9 cycles of reuse.

Effect of Triton X-100 on the Activity and Selectivity of Lipase Immobilized on Chemically Reduced Graphene Oxides

The effect of support hydrophobicity on lipase activity and substrate selectivity was investigated with and without Triton X-100 (TX-100). Lipases from Thermomyces lanuginosa (TL) and Alcaligenes sp. (QLM) were immobilized on graphene oxide (GO) and a range of chemically reduced graphene oxides (CRGOs) with different levels of surface hydrophobicity. Activity assays using 4-hydroxy-N-propyl-1,8-naphthalimide (NAP) esters of varying chain lengths (NAP-butyrate (NAP-B), NAP-octanoate (NAP-O), and NAP-palmitate (NAP-P)) showed that the activity of immobilized QLM and TL decreased by more than 60% on GO and 80% on CRGO (2 h), with activity decreasing further as surface hydrophobicity of the CRGOs increased. Across the hydrophobicity range of GO/CRGOs, the substrate selectivity of QLM shifted from more readily hydrolyzing NAP-P to NAP-B, while TL retained its substrate selectivity for NAP-O. Lipase TL was also shown to desorb from GO and 2 h CRGO when mixed with NAP-O and NAP-P, whereas QLM did not. Circular dichroism analyses of the lipase α-helix content correlate to the observed activity data, with decreases in the α-helical content (40% in TL and 20% in QLM relative to free lipase) consistent with decreases in activity after immobilization on GO. α-Helical content decreased even further as the surface hydrophobicity of CRGOs increased. Attenuated total reflectance-Fourier transform infrared spectroscopy also showed significant changes to the lipase secondary structure upon immobilization. The addition of TX-100 into the activity assay modified the substrate selectivity of immobilized QLM, improving the activity against NAP-O (90%) and NAP-P (67%) compared to the activity measured without TX-100. It was shown that TX-100 primarily affected the activity of QLM by interacting with the ester substrate and the lipase itself. This study provides an improved understanding of how support hydrophobicity and the presence of TX-100 can affect activity/selectivity of lipases immobilized on hydrophobic supports.

Ethanol as additive enhance the performance of immobilized lipase LipA from Pseudomonas aeruginosa on polypropylene support

Immobilization is practical to upgrade enzymes, increasing their performance and expanding their applications. The recombinant, solvent tolerant lipase LipA PSA01 from Pseudomonas aeruginosa was immobilized on polypropylene Accurel® MP1004 to improve its performance. We investigated the effect of ethanol as an additive during the immobilization process at three concentrations (20%, 25%, and 30%) on the operational behavior of the enzyme. The immobilization efficiency was higher than 92%, and the immobilized enzymes showed hyperactivation and thermal resistance depending on the concentration of ethanol. For example, at 70 °C, the free enzyme lost the activity, while the prepared one with ethanol 25% conserved a residual activity of up to 73.3% (∆ T¹⁵ ₅₀ = 27.1 °C). LipA immobilized had an optimal pH value lower than that of the free enzyme, and the organic solvent tolerance of the immobilized enzymes depended on the ethanol used. Hence, the immobilized enzyme with ethanol 25% showed hyperactivation to more solvents than the soluble enzyme. Remarkable stability towards methanol (up to 8 folds) was evidenced in all the immobilized preparations. The immobilized enzyme changed their chemo preference, and it hydrolyzed oils preferentially with short-chain than those with long-chain. LipA had a notable shelf-life after one year, keeping its activity up to 87%. Ethanol facilitated the access of the enzyme to the hydrophobic support and increased its activity and stability according to the amount of ethanol added.

Noninvasive, label-free, and quantitative monitoring of lipase kinetics using terahertz emission technology

Enzymes catalyze chemical transformations of great importance in many fields, and analysis of the rate of these transformations is equally important. The latter are typically monitored using surrogate substrates that produce quantifiable optical signals, owing to limitations associated with "label-free" techniques that could be used to monitor the transformation of original substrate molecules. In this study, terahertz (THz) emission technology is used as a noninvasive and label-free technique to monitor the kinetics of lipase-induced hydrolysis of several substrate molecules (including the complex substrate whole cow's milk) and horseradish peroxidase-catalyzed oxidation of o-phenylenediamine in the presence of H₂ O₂ . This technique was found to be quantitative, and kinetic parameters are compared to those obtained by proton NMR spectroscopy or UV/Vis spectroscopy. This study sets the stage for investigating THz emission technology as a tool for research and development involving enzymes, and for monitoring industrial processes in the food, cosmetic, detergent, pharmaceutical, and biodiesel sectors.

Construction of novel curdlan-based and Ca2+-chelated magnetic microspheres (CCMM) for efficient protein purification and oriented immobilization

In this study, curdlan-based and calcium ion (Ca²⁺)-chelated magnetic microspheres (CCMM) were prepared for protein purification and oriented immobilization. Additional purification steps before immobilization were not required. CCMM samples were produced by reverse embedding of Fe₃O₄ nanoparticles with curdlan and chelated with Ca²⁺ in the presence of iminodiacetic acid. The β-xylanase XynII from Trichoderma reesei QM6a was used to investigate the efficiency of CCMM preparation. The resulting CCMM-XynII was found to be very stable, showing 82 % and 60 % of initial activities after storage for 35 days and after being assayed ten times, respectively. In addition, the CCMM-XynII showed higher stabilities in the presence of organic solvents and multiple chemicals than the free XynII, suggesting that the CCMM-XynII could be efficient for applications requiring the presence of organic solvents. In addition, CCMM may be more suitable than commercially available Ni-NTA for purification of proteins intolerant of Ni²⁺.

Lipase from Rhizopus oryzae R1: in-depth characterization, immobilization, and evaluation in biodiesel production

Background

Rhizopus species is among the most well-known lipase producers, and its enzyme is suitable for use in many industrial applications. Our research focuses on the production of lipase utilizing waste besides evaluating its applications.

Results

An extracellular lipase was partially purified from the culture broth of Rhizopus oryzae R1 isolate to apparent homogeneity using ammonium sulfate precipitation followed by desalting via dialysis. The partially purified enzyme was non-specific lipase and the utmost activity was recorded at pH 6, 40 °C with high stability for 30 min. The constants K_m and V_max, calculated from the Lineweaver-Burk plot, are 0.3 mg/mL and 208.3 U/mL, respectively. Monovalent metal ions such as Na⁺ (1 and 5 mM) and K⁺ (5 mM) were promoters of the lipase to enhance its activity with 110, 105.5, and 106.5%, respectively. Chitosan was used as a perfect support for immobilization via both adsorption and cross-linking in which the latter method attained immobilization efficiency of 99.1% and reusability of 12 cycles. The partially purified enzyme proved its ability in forming methyl oleate (biodiesel) through the esterification of oleic acid and transesterification of olive oil.

Conclusion

The partially purified and immobilized lipase from Rhizopus oryzae R1 approved excellent efficiency, reusability, and a remarkable role in detergents and biodiesel production.

Modified silicates and carbon nanotubes for immobilization of lipase from Rhizomucor miehei: Effect of support and immobilization technique on the catalytic performance of the immobilized biocatalysts

Lipase from Rhizomucor miehei (RML) was covalently immobilized on different supports, two silica gels and two carbon nanotube samples, using two different strategies. RML was immobilized on 3-carboxypropyl silica gel (RML@Si-COOH) and multi-wall carbon nanotubes containing carboxylic acid functionalities (RML@MCNT-COOH) using a two-step carbodiimide activation/immobilization reaction. Moreover, the enzyme was also immobilized on 3-aminopropyl silica (RML@Si-Glu) and single-wall carbon nanotubes functionalized with 3-APTES and activated with glutaraldehyde (RML@SCNT-Glu). Before and after RML immobilization, the structurel properties of supports were characterized and compared in detail. After immobilization, the expressed activities were 36.9, 90.2, 16.9, and 26.1 % for RML@Si-COOH, RML@Si-Glu, RML@MCNT-COOH, and RML@SCNT-Glu, respectively. The kinetic parameters of free and immobilized RML samples were determined for three substrates, p-nitrophenyl acetate, p-nitrophenyl butyrate and p-nitrophenyl palmitate, and RML@Si-Glu showed higher catalytic efficiency than the other immobilized RML samples. RML@Si-COOH, RML@Si-Glu, RML@MCNT-COOH, and RML@SCNT-Glu exhibited 5.8, 7.6, 4.2 and 4.6 folds longer half-life values than those of the free enzyme at pH 7.5 and 40 °C. Recyclability studies showed that all the immobilized RML biocatalysts retained over 90 % of their initial activities after ten cycles in the hydrolysis of p-nitrophenyl butyrate.

Catalytic and physical features of a naturally immobilized Yarrowia lipolytica lipase in cell debris (LipImDebri) displaying high thermostability

Lipase activity (337 U/g dry weight of cell debris) was detected in cell debris after ultrasound treatment of Yarrowia lipolytica cells cultivated in residual frying palm oil. It is a naturally immobilized lipase with protein content of 47%, herein called LipImDebri. This immobilized biocatalyst presents low hydrophobicity (8%), that can be increased adjusting pH and buffer type. Despite apparent intact cells, electron microscopy showed a shapeless and flat surface for LipImDebri and optical microscopy revealed no cell viability. Besides, an inferior mean diameter (3.4 mm) in relation to whole cells reveals structure modification. A high negative zeta potential value (- 33.86 mV) for pH 6 and 25 °C suggests that LipImDebri is a stable suspension in aqueous solution. Fourier Transform Infrared Spectra (FTIR) expose differences between LipImDebri and extracellular lipase extract signaling a physical interaction between enzyme and cell debris, which is possibly the reason for the high thermostability (k _d = 0.246 h^-1; t _1/2 = 2.82 h at 50 °C, pH 7.0). A good adjustment of LipImDebri kinetic data with Hill equation (R ² = 0.95) exposes an allosteric behavior related to the presence of more than one lipase isoform. These features reveal that LipImDebri can be a good catalyst for industrial applications.

Free and Substrate-Immobilised Lipases from Fusarium verticillioides P24 as a Biocatalyst for Hydrolysis and Transesterification Reactions

Fungal enzymes are widely used in technological processes and have some interesting features to be applied in a variety of biosynthetic courses. Here, free and substrate-immobilised lipases from Fusarium verticillioides P24 were obtained by solid-state fermentation using wheat bran as substrate and fungal carrier. Based on their hydrolytic and transesterification activities, the lipases were characterised as pH-dependent in both reactions, with higher substrate conversion in an alkaline environment. Thermally, the lipases performed well from 30 to 45 °C, being more stable in mild conditions. Organic solvents significantly influenced the lipase selectivity using different vegetable oils as fatty acid source. Omega(ω)-3 production in n-hexane achieved 45% using canola oil, against ≈ 18% in cyclohexane. However, ω-6 production was preferably produced for both solvents using linseed oil with significant alterations in the yield (≈ 79% and 49% for n-hexane and cyclohexane, respectively). Moreover, the greatest enzyme selectivity for ω-6 led us to suppose a lipase preference for the Sn1 position of the triacylglycerol. Lastly, a transesterification reaction was performed, achieving 90% of ester conversion in 72 h. This study reports the characterisation and use of free and substrate-immobilised lipases from Fusarium verticillioides P24 as an economic and efficient method for the first time.

High Throughput Screening for New Fungal Polyester Hydrolyzing Enzymes

There is a strong need for novel and more efficient polyester hydrolyzing enzymes in order to enable the development of more environmentally friendly plastics recycling processes allowing the closure of the carbon cycle. In this work, a high throughput system on microplate scale was used to screen a high number of fungi for their ability to produce polyester-hydrolyzing enzymes. For induction of responsible enzymes, the fungi were cultivated in presence of aliphatic and aromatic polyesters [poly(1,4-butylene adipate co terephthalate) (PBAT), poly(lactic acid) (PLA) and poly(1,4-butylene succinate) (PBS)], and the esterase activity in the culture supernatants was compared to the culture supernatants of fungi grown without polymers. The results indicate that the esterase activity of the culture supernatants was induced in about 10% of the tested fungi when grown with polyesters in the medium, as indicated by increased activity (to >50 mU/mL) toward the small model substrate para-nitrophenylbutyrate (pNPB). Incubation of these 50 active culture supernatants with different polyesters (PBAT, PLA, PBS) led to hydrolysis of at least one of the polymers according to liquid chromatography-based quantification of the hydrolysis products terephthalic acid, lactic acid and succinic acid, respectively. Interestingly, the specificities for the investigated polyesters varied among the supernatants of the different fungi.

Recent Developments in Carriers and Non-Aqueous Solvents for Enzyme Immobilization

Immobilization techniques are generally based on reusing enzymes in industrial applications to reduce costs and improve enzyme properties. These techniques have been developing for decades, and many methods for immobilizing enzymes have been designed. To find a better immobilization method, it is necessary to review the recently developed methods and have a clear overview of the advantages and limitations of each method. This review introduces the recently reported immobilization methods and discusses the improvements in enzyme properties by different methods. Among the techniques to improve enzyme properties, metal–organic frameworks, which have diverse structures, abundant organic ligands and metal nodes, offer a promising platform.

Immobilized Biocatalysts

An application-related definition for immobilized enzymes was given by Chibata in 1978 […] 

An Improved Method to Encapsulate Laccase from Trametes versicolor with Enhanced Stability and Catalytic Activity

In this work, laccase from Trametes versicolor pretreated with copper ion solution was entrapped in copper alginate beads. The presence of laccase in copper alginate beads was verified by Fourier transform infrared (FTIR) spectroscopy. The alginate concentration used was optimized based on the specific activity and immobilization yield. After entrapment, laccase presents perfect pH stability and thermal stability with 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as the substrate. Moreover, laccase in copper alginate beads exhibits good reusability during continuous batch operation for removing 2,4-dichlorophenol. More importantly, owing to the coupled effect of copper ion activation and copper alginate entrapment, the entrapped laccase shows a 3.0-fold and a 2.4-fold increase in specific activity and 2,4-DCP degradation rate compared with that of free laccase, respectively.