A CeO2/ZrO2-TiO2 Catalyst for the Selective Catalytic Reduction of NOx with NH3

A Study of CeSnOx and Pd/CeSnOx as Low-Temperature NOx Adsorbers with Excellent Hydrothermal Stability

In the present work, we report on two passive NOx adsorber (PNA) material candidates: the novel support CeSnOx with and without Pd loading. The NOx adsorption and storage capacities of fresh and hydrothermally aged CeSnOx and Pd/CeSnOx were investigated. The results show that CeSnOx exhibits a rather large NOx uptake and storage capacity (28.9 μmol/g), while the loading of Pd on CeSnOx can further increase the storage capacity to 37.6 μmol/g and affect the desorption temperature of NOx. It was found that the NOx desorption temperature of Pd/CeSnOx was compatible with the efficient operating window of selective catalytic reduction (SCR) catalysts. After a hydrothermal aging treatment at 800 °C for 12 h, the NOx adsorption and storage capacities of CeSnOx and Pd/CeSnOx increased, indicating excellent hydrothermal stability. The interaction of Pd with CeSnOx, the state of Pd species, and the structure of CeSnOx and Pd/CeSnOx are studied by combination of the characterization results.

Promotional catalytic activity and reaction mechanism of Ag-modified Ce0.6Zr0.4O2 catalyst for catalytic oxidation of ammonia

Ce_1-xZr_xO₂ composite oxides (molar, x = 0-1.0, interval of 0.2) were prepared by a cetyltrimethylammonium bromide-assisted precipitation method. The enhancement of silver-species modification and catalytic mechanism of adsorption-transformation-desorption process were investigated over the Ag-impregnated catalysts for low-temperature selective catalytic oxidation of ammonia (NH₃-SCO). The optimal 5 wt.% Ag/Ce_0.6Zr_0.4O₂ catalyst presented good NH₃-SCO performance with >90% NH₃ conversion at temperature (T) ≥ 250°C and 89% N₂ selectivity. Despite the irregular block shape and underdeveloped specific surface area (∼60 m²/g), the naked and Ag-modified Ce_0.6Zr_0.4O₂ solid solution still obtained highly dispersed distribution of surface elements analyzed by scanning electron microscope-energy dispersive spectrometer (SEM-EDS) (mapping), N₂ adsorption-desorption test and X-ray diffraction (XRD). H₂ temperature programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) results indicated that Ag-modification enhanced the mobility and activation of oxygen-species leading to a promotion on CeO₂ reducibility and synergistic Ag⁰/Ag⁺ and Ce⁴⁺/Ce³⁺ redox cycles. Besides, Ag⁺/Ag₂O clusters could facilitate the formation of surface oxygen vacancies that was beneficial to the adsorption and activation of ammonia. NH₃-temperature programmed desorption (NH₃-TPD) showed more adsorption-desorption capacity to ammonia were provided by physical, weak- and medium-strong acid sites. Diffused reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments revealed the activation of ammonia might be the control step of NH₃-SCO procedure, during which NH₃ dehydrogenation derived from NH_x-species and also internal selective catalytic reduction (i-SCR) reactions were proposed.

Influence of zirconia addition in TiO2 and TiO2-CeO2 aerogels on the textural, structural and catalytic properties of supported vanadia in chlorobenzene oxidation

This paper studies the effect of the direct incorporation of ZrO₂ in TiO₂ and TiO₂-CeO₂ aerogel supports prepared by sol-gel route on the physico-chemical and catalytic properties of supported vanadia catalysts in the total oxidation of chlorobenzene. The obtained catalysts have been characterized by means of ICP-AES, N₂ adsorption-desorption at 77 K, XRD, XPS, H₂-TPR and NH₃-TPD. The results revealed that Zr-doped V₂O₅ based catalyst is beneficial for the improvement of catalytic properties in chlorobenzene total oxidation. In particular, in the absence of cerium groups, this beneficial effect is correlated with the better acidic properties or/and the stabilization of the V₂O₅ active phase in a higher oxidation state. However, in the case of cerium rich catalyst, this positive effect is much stronger thanks to the enhanced redox properties of V₂O₅/TiO₂-CeO₂-ZrO₂.

Synergistic Effects of Ternary PdO-CeO2-OMS-2 Catalyst Afford High Catalytic Performance and Stability in the Reduction of NO with CO

We developed a robust ternary PdO-CeO₂-OMS-2 catalyst with excellent catalytic performance in the selective reduction of NO with CO using a strategy based on combining components that synergistically interact leading to an effective abatement of these toxic gases. The catalyst affords 100% selectivity to N₂ at the nearly full conversion of NO and CO at 250 °C, high stability in the presence of H₂O, and a remarkable SO₂ tolerance. To unravel the origin of the excellent catalytic performance, the structural and chemical properties of the PdO-CeO₂-OMS-2 nanocomposite were analyzed in the as-prepared and used state of the catalyst, employing a series of pertinent characterization methods and specific catalytic tests. The experimental as well as theoretical results, based on density-functional theory calculations suggest that CO and NO follow different reaction pathways, CO is preferentially adsorbed and oxidized at Pd sites (Pd^II and Pd⁰), while NO decomposes on the ceria surface. Lattice oxygen vacancies at the interfacial perimeter of PdO-CeO₂ and PdO-OMS-2, and the diffusion of oxygen and oxygen vacancies are proposed to play a critical role in this multicenter reaction system.

Emissions Control Catalysis

Important advances have been achieved over the past years in agriculture, industrial technology, energy, and health, which have contributed to human well-being [...]

Ru-Ti Oxide Based Catalysts for HCl Oxidation: The Favorable Oxygen Species and Influence of Ce Additive

Several Ru-Ti oxide-based catalysts were investigated for the catalytic oxidation of HCl to Cl2 in this work. The active component RuO2 was loaded on different titanium-containing supports by a facile wetness impregnation method. The Ru-Ti oxide based catalysts were characterized by XRD, N2 sorption, SEM, TEM, H2-TPR, XPS, and Raman, which is correlated with the catalytic tests. Rutile TiO2 was confirmed as the optimal support even though it has a low specific surface area. In addition to the interfacial epitaxial lattice matching and epitaxy, the extraordinary performance of Ru-Ti rutile oxide could also be attributed to the favorable oxygen species on Ru sites and specific active phase-support interactions. On the other hand, the influence of additive Ce on the RuO2/TiO2-rutile was studied. The incorporation of Ce by varied methods resulted in further oxidation of RuO2 into RuO2δ+ and a modification of the support structure. The amount of favorable oxygen species on the surface was decreased. As a result, the Deacon activity was lowered. It was demonstrated that the surface oxygen species and specific interactions of the Ru-Ti rutile oxide were critical to HCl oxidation.