Enhanced (−)-α-Bisabolol Productivity by Efficient Conversion of Mevalonate in Escherichia coli

Engineered Methylococcus capsulatus Bath for efficient methane conversion to isoprene

Isoprene has numerous industrial applications, including rubber polymer and potential biofuel. Microbial methane-based isoprene production could be a cost-effective and environmentally benign process, owing to a reduced carbon footprint and economical utilization of methane. In this study, Methylococcus capsulatus Bath was engineered to produce isoprene from methane by introducing the exogenous mevalonate (MVA) pathway. Overexpression of MVA pathway enzymes and isoprene synthase from Populus trichocarpa under the control of a phenol-inducible promoter substantially improved isoprene production. M. capsulatus Bath was further engineered using a CRISPR-base editor to disrupt the expression of soluble methane monooxygenase (sMMO), which oxidizes isoprene to cause toxicity. Additionally, optimization of the metabolic flux in the MVA pathway and culture conditions increased isoprene production to 228.1 mg/L, the highest known titer for methanotroph-based isoprene production. The developed methanotroph could facilitate the efficient conversion of methane to isoprene, resulting in the sustainable production of value-added chemicals.

Characterization of γ-Cadinene Enzymes in Ganoderma lucidum and Ganoderma sinensis from Basidiomycetes Provides Insight into the Identification of Terpenoid Synthases

Enzymes boost protein engineering, directed evolution, and the biochemical industry and are also the cornerstone of metabolic engineering. Basidiomycetes are known to produce a large variety of terpenoids with unique structures. However, basidiomycetous terpene synthases remain largely untapped. Therefore, we provide a modeling method to obtain specific terpene synthases. Aided by bioinformatics analysis, three γ-cadinene enzymes from Ganoderma lucidum and Ganoderma sinensis were accurately predicted and identified experimentally. Based on the highly conserved amino motifs of the characterized γ-cadinene enzymes, the enzyme was reassembled as model 1. Using this model as a template, 67 homologous sequences of the γ-cadinene enzyme were screened from the National Center for Biotechnology Information (NCBI). According to the 67 sequences, the same gene structure, and similar conserved motifs to model 1, the γ-cadinene enzyme model was further improved by the same construction method and renamed as model 2. The results of bioinformatics analysis show that the conservative regions of models 1 and 2 are highly similar. In addition, five of these sequences were verified, 100% of which were γ-cadinene enzymes. The accuracy of the prediction ability of the γ-cadinene enzyme model was proven. In the same way, we also reanalyzed the identified Δ⁶-protoilludene enzymes in fungi and (-)-α-bisabolol enzymes in plants, all of which have their own unique conserved motifs. Our research method is expected to be used to study other terpenoid synthases with a similar or the same function in basidiomycetes, ascomycetes, bacteria, and plants and to provide rich enzyme resources.

Alternative metabolic pathways and strategies to high-titre terpenoid production in Escherichia coli

Covering: up to 2021Terpenoids are a diverse group of chemicals used in a wide range of industries. Microbial terpenoid production has the potential to displace traditional manufacturing of these compounds with renewable processes, but further titre improvements are needed to reach cost competitiveness. This review discusses strategies to increase terpenoid titres in Escherichia coli with a focus on alternative metabolic pathways. Alternative pathways can lead to improved titres by providing higher orthogonality to native metabolism that redirects carbon flux, by avoiding toxic intermediates, by bypassing highly-regulated or bottleneck steps, or by being shorter and thus more efficient and easier to manipulate. The canonical 2-C-methyl-D-erythritol 4-phosphate (MEP) and mevalonate (MVA) pathways are engineered to increase titres, sometimes using homologs from different species to address bottlenecks. Further, alternative terpenoid pathways, including additional entry points into the MEP and MVA pathways, archaeal MVA pathways, and new artificial pathways provide new tools to increase titres. Prenyl diphosphate synthases elongate terpenoid chains, and alternative homologs create orthogonal pathways and increase product diversity. Alternative sources of terpenoid synthases and modifying enzymes can also be better suited for E. coli expression. Mining the growing number of bacterial genomes for new bacterial terpenoid synthases and modifying enzymes identifies enzymes that outperform eukaryotic ones and expand microbial terpenoid production diversity. Terpenoid removal from cells is also crucial in production, and so terpenoid recovery and approaches to handle end-product toxicity increase titres. Combined, these strategies are contributing to current efforts to increase microbial terpenoid production towards commercial feasibility.

Separation and purification of plant terpenoids from biotransformation

The production of plant terpenoids through biotransformation has undoubtedly become one of the research hotspots, and the continuous upgrading of the corresponding downstream technology is also particularly important. Downstream technology is the indispensable technical channel for the industrialization of plant terpenoids. How to efficiently separate high-purity products from complex microbial fermentation broths or enzyme-catalyzed reactions to achieve high separation rates, high returns and environmental friendliness has become the focus of research in recent years. This review mainly introduces the common separation methods of plant terpenoids based on biotransformation from the perspectives of engineering strain construction, unit separation technology, product properties and added value. Then, further attention was paid to the application prospects of intelligent cell factories and control in the separation of plant terpenoids. Finally, some current challenges and prospects are proposed, which provide possible directions and guidance for the separation and purification of terpenoids and even industrialization.

The beauty of biocatalysis: sustainable synthesis of ingredients in cosmetics

Covering: 2015 up to July 2021The market for cosmetics is consumer driven and the desire for green, sustainable and natural ingredients is increasing. The use of isolated enzymes and whole-cell organisms to synthesise these products is congruent with these values, especially when combined with the use of renewable, recyclable or waste feedstocks. The literature of biocatalysis for the synthesis of ingredients in cosmetics in the past five years is herein reviewed.

Production of (-)-α-bisabolol in metabolically engineered Saccharomyces cerevisiae

(-)-α-Bisabolol is a natural monocyclic sesquiterpene alcohol present in German chamomile and has been used as an ingredient of functional foods, cosmetics and pharmaceuticals. In this study, metabolic engineering strategies were attempted to produce (-)-α-bisabolol in Saccharomyces cerevisiae. The codon-optimized MrBBS gene coding for (-)-α-bisabolol synthase from Matricaria recutita was expressed in S. cerevisiae for (-)-α-bisabolol production. The resulting strain (DM) produced 9.5 mg/L of (-)-α-bisabolol in 24 h of batch culture. Additionally, the mevalonate pathway was intensified by introducing a truncated HMG1 gene coding for HMG-CoA reductase and ERG10 encoding acetyl-CoA thiolase. The resulting strain (DtEM) produced a 2.9-fold increased concentration of (-)-α-bisabolol than the DM strain. To increase the acetyl-CoA pool, the ACS1 gene coding for acetyl-CoA synthetase was also overexpressed in the DtEM strain. Finally, the DtEMA strain produced 124 mg/L of (-)-α-bisabolol with 2.7 mg/L-h of productivity in a fed-batch fermentation, which were 13 and 6.8 times higher than the DM strain in batch culture, respectively. Conclusively, these metabolically-engineered approaches might pave the way for the sustainable production of other sesquiterpenes in engineered S. cerevisiae.

(-)-α-Bisabolol Production in Engineered Escherichia coli Expressing a Novel (-)-α-Bisabolol Synthase from the Globe Artichoke Cynara cardunculus var. Scolymus

(-)-α-Bisabolol is a functional ingredient in various health and cosmetic products and has antibacterial, anti-inflammatory, and wound healing properties. (-)-α-Bisabolol is chemically synthesized and produced by steam distillation of essential oils extracted from Brazilian Candeia (Eremanthus erythropappus). To sustainably produce pure (-)-α-bisabolol, we previously engineered Escherichia coli to produce 9.1 g/L (-)-α-bisabolol via heterologous mevalonate pathways and (-)-α-bisabolol synthase (BOS) from German chamomile, Matricaria recutita (MrBOS). BOS has only been reported in MrBOS and Brazilian Candeia (EeBOS). The limited availability of BOS has made it difficult to achieve high titer and yield and large-scale (-)-α-bisabolol production. We identified a novel BOS in globe artichoke (CcBOS) and examined its functionality in vitro and in vivo. CcBOS showed higher catalytic efficiency and (-)-α-bisabolol production rates than those from MrBOS or EeBOS. In fed-batch fermentation, CcBOS generated the highest reported (-)-α-bisabolol titer to date (23.4 g/L). These results may facilitate economically viable industrial (-)-α-bisabolol production.

Adaptive laboratory evolution of Escherichia coli lacking cellular byproduct formation for enhanced acetate utilization through compensatory ATP consumption

Acetate has attracted great attention as a carbon source to develop economically feasible bioprocesses for sustainable bioproducts. Acetate is a less-preferred carbon source and a well-known growth inhibitor of Escherichia coli. In this study, we carried out adaptive laboratory evolution of an E. coli strain lacking four genes (adhE, pta, ldhA, and frdA) involved in acetyl-CoA consumption, allowing the efficient utilization of acetate as its sole carbon and energy source. Four genomic mutations were found in the evolved strain through whole-genome sequencing, and two major mutations (in cspC and patZ) mainly contributed to efficient utilization of acetate and tolerance to acetate. Transcriptomic reprogramming was examined by analyzing the genome-wide transcriptome with different carbon sources. The evolved strain showed high levels of intracellular ATP by upregulation of genes involved in NADH and ATP biosynthesis, which facilitated the production of enhanced green fluorescent protein, mevalonate, and n-butanol using acetate alone. This new strain, given its high acetate tolerance and high ATP levels, has potential as a starting host for cell factories targeting the production of acetyl-CoA-derived products from acetate or of products requiring high ATP levels.

Production of Terpenoids by Synthetic Biology Approaches

Terpenoids are a large family of natural products with remarkable diverse biological functions, and have a wide range of applications as pharmaceuticals, flavors, pigments, and biofuels. Synthetic biology is presenting possibilities for sustainable and efficient production of high value-added terpenoids in engineered microbial cell factories, using Escherichia coli and Saccharomyces cerevisiae which are identified as well-known industrial workhorses. They also provide a promising alternative to produce non-native terpenes on account of available genetic tools in metabolic engineering and genome editing. In this review, we summarize the recent development in terpenoids production by synthetic biology approaches.

Recent Advances on Biocatalysis and Metabolic Engineering for Biomanufacturing

The use of biocatalysts, including enzymes and metabolically engineered cells, has attracted a great deal of attention in chemical and bio-industry, because biocatalytic reactions can be conducted under environmentally-benign conditions and in more sustainable ways [...]