Polyethylene Glycol Pulsed Electrodeposition for the Development of Antifouling Coatings on Titanium

A Janus Adhesive Hydrogel with Integrated Attack and Defense for Bacteria Killing and Antifouling

Objective: Skin wound exposed to complex external environment for a long time is highly susceptible to bacterial infection. Impact Statement: This work designs a Janus adhesive dual-layer hydrogel containing in situ silver nanoparticles (named PSAP/DXP@AgNPs) with integrated attack and defense to simultaneously kill the existing bacteria and prevent foreign bacterial contamination. Introduction: The current gauze dressing fixed by tape fails to well fit at skin wound and lacks intrinsic antibacterial property, making it highly prone to causing secondary infection. Moreover, foreign bacteria may contaminate the wound dressing during use, further increasing the risk of secondary infection. Methods: In this work, a Janus adhesive dual-layer PSAP/DXP@AgNPs hydrogel is prepared by sequentially building the PSAP gel layer containing zwitterionic poly(sulfobetaine methacrylamide) (PSBMA) on the DXP@AgNPs gel layer containing in situ catechol-reduced AgNPs. Results: The flexible PSAP/DXP@AgNPs can adapt shape change of skin and adhere to skin tissue with interfacial toughness of 153.38 J m-2 relying on its DXP@AgNPs layer, which is beneficial to build favorable fit. The in situ reduced AgNPs released from the DXP@AgNPs layer of PSAP/DXP@AgNPs exhibit obvious antibacterial effects against Escherichia coli and Staphylococcus aureus, with antibacterial rates of 99% and 88%, respectively. Meanwhile, the hydrated PSAP layer of PSAP/DXP@AgNPs containing PSBMA is able to prevent the bacterial contamination, decreasing the risk of secondary infection. Besides, cell experiments demonstrate that PSAP/DXP@AgNPs is biocompatible. Conclusion: The PSAP/DXP@AgNPs hydrogel with integrated attack and defense simultaneously possessing bacteria-killing and bacteria-antifouling properties is a potential alternative in treating infected skin wound.

TiO2/PEG as smart anticorrosion and drug-eluting platforms in inflammatory conditions

The failure of a titanium implant is often attributed to inflammatory reactions following implantation. This study focuses on the synthesis of a polyethylene glycol (PEG) layer on porous titanium dioxide (TiO2) coatings using plasma electrolytic oxidation (PEO). This PEG layer serves as a foundation for a drug-eluting platform designed to respond to pH stimuli during inflammation. Betamethasone (BET), a widely used anti-inflammatory drug, was loaded onto the pH-responsive functional PEG layers. The application of the PEG-BET layer onto TiO2 coatings through the vacuum dip coating method resulted in a pH-sensitive sustained release of BET over a 30-day period. Notably, the release rates were 81% at pH 5.0 and 55% at pH 7.2. Electrochemical corrosion tests conducted in both normal and acidic inflammatory solutions demonstrated that duplex composite coatings offer superior protection compared to simple oxide coatings. In a pH 5.0 solution, corrosion current density measurements revealed values of 1.75 μA cm-2 (PEO/PEG-BET), 8.87 μA cm-2 (PEO), and 49.17 μA cm-2 (bare titanium). These results highlight the effectiveness of the PEO/PEG-BET layer in sealing pores within PEO coatings, subsequently reducing the infiltration of corrosive ions in inflammatory environments.

Biofunctionalization of Porous Titanium Oxide through Amino Acid Coupling for Biomaterial Design

Porous transition metal oxides are widely studied as biocompatible materials for the development of prosthetic implants. Resurfacing the oxide to improve the antibacterial properties of the material is still an open issue, as infections remain a major cause of implant failure. We investigated the functionalization of porous titanium oxide obtained by anodic oxidation with amino acids (Leucine) as a first step to couple antimicrobial peptides to the oxide surface. We adopted a two-step molecular deposition process as follows: self-assembly of aminophosphonates to titanium oxide followed by covalent coupling of Fmoc-Leucine to aminophosphonates. Molecular deposition was investigated step-by-step by Atomic Force Microscopy (AFM) and X-ray Photoemission Spectroscopy (XPS). Since the inherent high roughness of porous titanium hampers the analysis of molecular orientation on the surface, we resorted to parallel experiments on flat titanium oxide thin films. AFM nanoshaving experiments on aminophosphonates deposited on flat TiO₂ indicate the formation of an aminophosphonate monolayer while angle-resolved XPS analysis gives evidence of the formation of an oriented monolayer exposing the amine groups. The availability of the amine groups at the outer interface of the monolayer was confirmed on both flat and porous substrates by the following successful coupling with Fmoc-Leucine, as indicated by high-resolution XPS analysis.

Antibacterial features of material surface: strong enough to serve as antibiotics?

Bacteria are small but need big efforts to control. The use of antibiotics not only produces superbugs that are increasingly difficult to inactivate, but also raises environmental concerns with the growing consumption. It is now believed that the antibacterial task can count on some physiochemical features of material surfaces, which can be anti-adhesive or bactericidal without releasing toxicants. It is necessary to evaluate to what extent can we rely on the surface design since the actual application scenarios will need the antibacterial performance to be sharp, robust, environmentally friendly, and long-lasting. Herein, we review the recent laboratory advances that have been classified based on the specific surface features, including hydrophobicity, charge potential, micromorphology, stiffness and viscosity, and photoactivity, and the antibacterial mechanisms of each feature are included to provide a basic rationale for future design. The significance of anti-biofilms is also introduced, given the big role of biofilms in bacteria-caused damage. A perspective on the potential wide application of antibacterial surface features as a substitute or supplement to antibiotics is then discussed. Surface design is no doubt a solution worthy to explore, and future success will be a result of further progress in multiple directions, including mechanism study and material preparation.

Dental Materials for Oral Microbiota Dysbiosis: An Update

The balance or dysbiosis of the microbial community is a major factor in maintaining human health or causing disease. The unique microenvironment of the oral cavity provides optimal conditions for colonization and proliferation of microbiota, regulated through complex biological signaling systems and interactions with the host. Once the oral microbiota is out of balance, microorganisms produce virulence factors and metabolites, which will cause dental caries, periodontal disease, etc. Microbial metabolism and host immune response change the local microenvironment in turn and further promote the excessive proliferation of dominant microbes in dysbiosis. As the product of interdisciplinary development of materials science, stomatology, and biomedical engineering, oral biomaterials are playing an increasingly important role in regulating the balance of the oral microbiome and treating oral diseases. In this perspective, we discuss the mechanisms underlying the pathogenesis of oral microbiota dysbiosis and introduce emerging materials focusing on oral microbiota dysbiosis in recent years, including inorganic materials, organic materials, and some biomolecules. In addition, the limitations of the current study and possible research trends are also summarized. It is hoped that this review can provide reference and enlightenment for subsequent research on effective treatment strategies for diseases related to oral microbiota dysbiosis.

Latest Trends in Surface Modification for Dental Implantology: Innovative Developments and Analytical Applications

An increase in the world population and its life expectancy, as well as the ongoing concern about our physical appearance, have elevated the relevance of dental implantology in recent decades. Engineering strategies to improve the survival rate of dental implants have been widely investigated, focusing on implant material composition, geometry (usually guided to reduce stiffness), and interface surrounding tissues. Although efforts to develop different implant surface modifications are being applied in commercial dental prostheses today, the inclusion of surface coatings has gained special interest, as they can be tailored to efficiently enhance osseointegration, as well as to reduce bacterial-related infection, minimizing peri-implantitis appearance and its associated risks. The use of biomaterials to replace teeth has highlighted the need for the development of reliable analytical methods to assess the therapeutic benefits of implants. This literature review considers the state-of-the-art strategies for surface modification or coating and analytical methodologies for increasing the survival rate for teeth restoration.

Trends in Managing Cardiac and Orthopaedic Device-Associated Infections by Using Therapeutic Biomaterials

Over the years, there has been an increasing number of cardiac and orthopaedic implanted medical devices, which has caused an increased incidence of device-associated infections. The surfaces of these indwelling devices are preferred sites for the development of biofilms that are potentially lethal for patients. Device-related infections form a large proportion of hospital-acquired infections and have a bearing on both morbidity and mortality. Treatment of these infections is limited to the use of systemic antibiotics with invasive revision surgeries, which had implications on healthcare burdens. The purpose of this review is to describe the main causes that lead to the onset of infection, highlighting both the biological and clinical pathophysiology. Both passive and active surface treatments have been used in the field of biomaterials to reduce the impact of these infections. This includes the use of antimicrobial peptides and ionic liquids in the preventive treatment of antibiotic-resistant biofilms. Thus far, multiple in vivo studies have shown efficacious effects against the antibiotic-resistant biofilm. However, this has yet to materialize in clinical medicine.

Covalent immobilization of DJK-5 peptide on porous titanium for enhanced antibacterial effects and restrained inflammatory osteoclastogenesis

Currently, implant-related bone infection characterized by aggravated infection-induced inflammatory responses and osteolysis, remains a severe challenge in orthopedic surgery, especially in patients with osteoporosis. Attempts to control such responses using biomaterials with combined immunomodulatory and anti-bacterial properties may provide novel strategies. Herein, DJK-5, a class of host defense peptides (HDPs) with established antimicrobial and immunomodulatory functions, was introduced into porous Ti alloy. Our results indicated that the DJK-5 immobilized surfaces showed intrinsically multifunctional properties, including antibacterial ability, anti-inflammation, biocompatibility and osteolysis-inhibiting properties. The results demonstrated that the antibacterial efficiency of DJK-5 functionalized surfaces was over 90 % for both Gram-positive and Gram-negative bacteria. Specifically, DJK-5 functionalized samples also possessed the excellent anti-bacterial activity against a mixture of bacterial strains, including S. aureus, S. epidermidis and P. aeruginosa, with an antibacterial rate against mixed bacteria reaching 91.36 %, as well as reduced biofilm formation. The remarkable anti-bacterial efficacy was likely based on the direct anti-bacterial effect of DJK-5, which destroyed the integrity of bacteria membranes, leading to the leakage of intracellular materials. Additionally, the immobilized DJK-5 surfaces could indirectly kill bacteria through promoted macrophage capacity to bacteria uptake. Furthermore, DJK-5 functionalized surfaces suppressed inflammatory reaction by decreasing the release of pro-inflammatory factors and increasing the secretions of anti-inflammatory factors, and thereby impeded the activation of NF-κB signal pathway, which resulted in the disruption of the actin rings and decreased Tracp5b expressions. Based on these promising findings, the multi-functional DJK-5 immobilized titanium represents an efficient alternative to realize better osseointegration in sever implant-associated bacterial infections.

One-Step Liquid Phase Polymerization of HEMA by Atmospheric-Pressure Plasma Discharges for Ti Dental Implants

Dental implants can fail due to various factors, in which bad tissue integration is believed to have a significant role. Specific properties of the implant surface, such as its chemistry and roughness, are of paramount importance to address specific cell responses, such as the adsorption of proteins, as well as the adhesion and differentiation of cells, which are suitable for biomaterial and tissue engineering. In this study, an acrylate-containing coating was produced on titanium surfaces through the atmospheric pressure plasma treatment of a liquid precursor, 2-hydroxyethyl methacrylate. A hydrophilic coating was obtained, showing retention of the monomer chemistry as assessed by FTIR analysis and XPS. Enhanced fibroblast adhesion and decreased Staphylococcus aureus and Escherichia coli adhesion were recorded, showing that this is a suitable method to produce biocompatible coatings with a reduced bacterial adhesion.

Chemically Diverse Multifunctional Peptide Platforms with Antimicrobial and Cell Adhesive Properties

Bacterial infections and incomplete biomaterial integration are major problems that can lead to the failure of medical implants. However, simultaneously addressing these two issues remains a challenge. Here, we present a chemical peptide library based on a multifunctional platform containing the antimicrobial peptide LF1-11 and the cell-adhesive motif RGD. The scaffolds were customized with catechol groups to ensure straightforward functionalization of the implant surface, and linkers of different length to assess the effect of peptide accessibility on the biological response. The peptidic platforms significantly improved the adhesion of mesenchymal stem cells and showed antimicrobial effects against Staphylococcus aureus. Of note is that peptides bearing spacers that were too long displayed the lowest efficiency. Subsequently, we designed a platform replacing linear RGD by cyclic RGD; this further enhanced eukaryotic cell adhesion while retaining excellent antimicrobial properties, thus being a suitable candidate for tissue engineering applications.

Electrophoretic deposition of polymers and proteins for biomedical applications

This review is focused on new electrophoretic deposition (EPD) mechanisms for deposition biomacromolecules, such as biopolymers, proteins and enzymes. Among the rich literature sources of EPD of biopolymers, proteins and enzymes for biomedical applications we selected papers describing new fundamental deposition mechanisms. Such deposition mechanisms are of critical importance for further development of EPD method and its emerging biomedical applications. Our goal is to emphasize innovative ideas which have enriched colloid and interface science of EPD during recent years. We describe various mechanisms of cathodic and anodic EPD of charged biopolymers. Special attention is focused on in-situ chemical modification of biopolymers and crosslinking techniques. Recent innovations in the development of natural and biocompatible charged surfactants and film forming agents are outlined. Among the important advances in this area are the applications of bile acids and salts for EPD of neutral polymers. Such innovations allowed for the successful EPD of various electrically neutral functional polymers for biomedical applications. Particularly important are biosurfactant-polymer interactions, which facilitate dissolution, dispersion, charging, electrophoretic transport and deposit formation. Recent advances in EPD mechanisms addressed the problem of EPD of proteins and enzymes related to their charge reversal at the electrode surface. Conceptually new methods are described, which are based on the use of biopolymer complexes with metal ions, proteins, enzymes and other biomolecules. This review describes new developments in co-deposition of biomacromolecules and future trends in the development of new EPD mechanisms and strategies for biomedical applications.