Advances in Antibacterial Functionalized Coatings on Mg and Its Alloys for Medical Use—A Review

Nanomaterial-Based Antimicrobial Coating for Biomedical Implants: New Age Solution for Biofilm-Associated Infections

Recently, the upsurge in hospital-acquired diseases has put global health at risk. Biomedical implants being the primary source of contamination, the development of biomedical implants with antimicrobial coatings has attracted the attention of a large group of researchers from around the globe. Bacteria develops biofilms on the surface of implants, making it challenging to eradicate them with the standard approach of administering antibiotics. A further issue of current concern is the fast resurgence of resistance to conventional antibiotics. As nanotechnology continues to advance, various types of nanomaterials have been created, including 2D nanoparticles and metal and metal oxide nanoparticles with antimicrobial properties. Researchers from all over the world are using these materials as a coating agent for biomedical implants to create an antimicrobial environment. This comprehensive and contemporary review summarizes various metals, metal oxide nanoparticles, 2D nanomaterials, and their composites that have been used or may be used in the future as an antimicrobial coating agent for biomedical implants, as well as their succinct mode of action to combat biofilm-associated infection and diseases.

A Gallic Acid-Doped Polypyrrole Coating with Anticorrosion and Antibacterial Properties on Magnesium Alloy

Magnesium (Mg) and its alloys exhibit great potential as biomedical implants due to their excellent biological performance and mechanical properties. However, their clinical applications are limited by their rapid corrosion rate in physiological media and the risk of implant-associated infections. Herein, a multifunctional polypyrrole/gallic acid (PPy/GA) coating was deposited on an AZ31 Mg alloy substrate by electrochemical polymerization to enhance simultaneously the corrosion resistance and antibacterial properties of the Mg alloy. Electrochemical and in vitro immersion tests demonstrated that the anticorrosion performance of the Mg alloy was significantly improved with the PPy/GA coating. The thiazolyl blue tetrazolium bromide (MTT) assay and live-dead staining of L929 cells indicated the acceptable cytocompatibility of the PPy/GA coating. In vitro antibacterial tests revealed a remarkable enhancement in the antibacterial activity of the PPy/GA-coated Mg alloy compared with the PPy-coated material and the bare Mg alloy.

Biodegradable interbody cages for lumbar spine fusion: Current concepts and future directions

Lumbar fusion often remains the last treatment option for various acute and chronic spinal conditions, including infectious and degenerative diseases. Placement of a cage in the intervertebral space has become a routine clinical treatment for spinal fusion surgery to provide sufficient biomechanical stability, which is required to achieve bony ingrowth of the implant. Routinely used cages for clinical application are made of titanium (Ti) or polyetheretherketone (PEEK). Ti has been used since the 1980s; however, its shortcomings, such as impaired radiographical opacity and higher elastic modulus compared to bone, have led to the development of PEEK cages, which are associated with reduced stress shielding as well as no radiographical artefacts. Since PEEK is bioinert, its osteointegration capacity is limited, which in turn enhances fibrotic tissue formation and peri-implant infections. To address shortcomings of both of these biomaterials, interdisciplinary teams have developed biodegradable cages. Rooted in promising preclinical large animal studies, a hollow cylindrical cage (Hydrosorb™) made of 70:30 poly-l-lactide-co-d, l-lactide acid (PLDLLA) was clinically studied. However, reduced bony integration and unfavourable long-term clinical outcomes prohibited its routine clinical application. More recently, scaffold-guided bone regeneration (SGBR) with application of highly porous biodegradable constructs is emerging. Advancements in additive manufacturing technology now allow the cage designs that match requirements, such as stiffness of surrounding tissues, while providing long-term biomechanical stability. A favourable clinical outcome has been observed in the treatment of various bone defects, particularly for 3D-printed composite scaffolds made of medical-grade polycaprolactone (mPCL) in combination with a ceramic filler material. Therefore, advanced cage design made of mPCL and ceramic may also carry initial high spinal forces up to the time of bony fusion and subsequently resorb without clinical side effects. Furthermore, surface modification of implants is an effective approach to simultaneously reduce microbial infection and improve tissue integration. We present a design concept for a scaffold surface which result in osteoconductive and antimicrobial properties that have the potential to achieve higher rates of fusion and less clinical complications. In this review, we explore the preclinical and clinical studies which used bioresorbable cages. Furthermore, we critically discuss the need for a cutting-edge research program that includes comprehensive preclinical in vitro and in vivo studies to enable successful translation from bench to bedside. We develop such a conceptual framework by examining the state-of-the-art literature and posing the questions that will guide this field in the coming years.

Topography Control of Micro-Nanosized Anatase Coating on Magnesium Alloy

Constructing surface topographies in the micro- or nanometer range is an effective way to improve the biocompatibility of biomaterials. For the present work, anatase coatings with controllable micro/nanoscale characteristics were successfully prepared on an MgZn alloy surface via solvothermal route, and their formation mechanisms are discussed. The features of the as-prepared coatings were characterized using a scanning electron microscope (SEM), a transmission electron microscope (TEM), an atomic force microscope (AFM), X-ray diffraction (XRD), and a contact angle goniometer. The corrosion behavior of the coatings was also evaluated by testing the open circuit potential (OCP) in SBF (Simulated Body Fluid). The results show that a gradual variation of the anatase coating morphologies was obtained through adjusting the solvothermal reaction conditions. With the increase of NH4F concentration in the solution, the cross-combined anatase nanosheets became more dispersed. The micro/nanostructured anatase coatings provide the MgZn alloy with good corrosion resistance, which increased with the density of anatase nanosheets in the coatings. In addition, the coatings exhibit the inhibition of platelet aggregation, and the micro/nano structures can also adsorb endothelial cells.

A Review on Antibacterial Biomaterials in Biomedical Applications: From Materials Perspective to Bioinks Design

In tissue engineering, three-dimensional (3D) printing is an emerging approach to producing functioning tissue constructs to repair wounds and repair or replace sick tissue/organs. It allows for precise control of materials and other components in the tissue constructs in an automated way, potentially permitting great throughput production. An ink made using one or multiple biomaterials can be 3D printed into tissue constructs by the printing process; though promising in tissue engineering, the printed constructs have also been reported to have the ability to lead to the emergence of unforeseen illnesses and failure due to biomaterial-related infections. Numerous approaches and/or strategies have been developed to combat biomaterial-related infections, and among them, natural biomaterials, surface treatment of biomaterials, and incorporating inorganic agents have been widely employed for the construct fabrication by 3D printing. Despite various attempts to synthesize and/or optimize the inks for 3D printing, the incidence of infection in the implanted tissue constructs remains one of the most significant issues. For the first time, here we present an overview of inks with antibacterial properties for 3D printing, focusing on the principles and strategies to accomplish biomaterials with anti-infective properties, and the synthesis of metallic ion-containing ink, chitosan-containing inks, and other antibacterial inks. Related discussions regarding the mechanics of biofilm formation and antibacterial performance are also presented, along with future perspectives of the importance of developing printable inks.

Novel Hydroxyapatite Whiskers Modified by Silver Ion and Nano Zinc Oxide Used for Bone Defect Repairment

The hydroxyapatite (HA) is widely used as bone tissue repair material. The improvement of the antibacterial performance is an aroused general interest. In the present study, the silver ion and nano-zinc oxide modified hydroxyapatite whiskers (HAw) were successfully prepared. The microstructure and the composition of the modified HAw were analyzed by Field Emission Scanning Electron Microscopy (FESEM) and X-ray diffractometer (XRD). SEM analysis showed that the length of the whiskers was 70–190 μm, and the aspect ratio was 10–60. With the increase of Ag+ content, the length and aspect ratio of the whiskers gradually decreased and incomplete spherical hydroxyapatite appeared. FEEM analysis showed that nano-zinc oxide particles on ZnO/3Ag-HAw surface are evenly distributed; the average particle size is less than 30 nm. XRD analysis showed that after sol-gel and calcination treatment, the nano-zinc oxide phase appeared in the diffraction pattern of ZnO/Ag-HAw. TEM analysis showed that the interplanar spacing of 5Ag-HAw increased slightly. The CCK-8 and cells co-culture assays were used to assess the proliferation and differentiation of MC3T3-E1 cells, respectively. The antibacterial abilities of the modified HAw against E. coli (ATCC25922) and S. aureus (ATCC6538) were investigated. The cell cytotoxicity test showed that the cytotoxicity level was 0, and there was no cytotoxicity. Cell adhesion experiments showed that ZnO/3Ag-HAw has good cell compatibility and biological activity. The modified hawthorn has a bacteriostatic rate of more than 90% and has good bacteriostatic activity.

Properties of Titanium Oxide Coating on MgZn Alloy by Magnetron Sputtering for Stent Application

Constructing surface coatings is an effective way to improve the corrosion resistance and biocompatibility of magnesium alloy bioabsorbable implants. In this present work, a titanium oxide coating with a thickness of about 400 nm was successfully prepared on a MgZn alloy surface via a facile magnetron sputtering route. The surface features were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and the contact angle method. The corrosion behavior and biocompatibility were evaluated. The results indicated that the amorphous TiO2 coating with a flat and dense morphology was obtained by magnetron-sputtering a titanium oxide target. The corrosion current density decreased from 1050 (bare MgZn alloy) to 49 μA/cm2 (sample with TiO2 coating), suggesting a significant increase in corrosion resistance. In addition, the TiO2 coating showed good biocompatibilities, including significant reduced hemolysis and platelet adhesion, and increased endothelial cell viability and adhesion.