High Transmittance Superhydrophobic Coatings with Durable Self-Cleaning Properties

Wetting Properties of Simulated and Commercial Contaminants on High Transmittance Superhydrophobic Coating

The large and necessary diffusion of huge solar plants in extra urban areas implies the adoption of maintenance strategies especially where human intervention would require high costs and logistic problems. Animal dejections like bird droppings and agricultural sprays are environmental agents able to significantly decrease light absorption and, in some cases, cause serious damage to the electric conversion systems in a photovoltaic panel. In this work, the performance of a superhydrophobic (SH) coating in terms of durable self-cleaning properties and transparency has been studied in the presence of commercial and simulated contaminants on glass reference and solar panel surfaces. Wettability studies have been carried out both in static and dynamic conditions in order to compare the compositional effect of commercial liquids used as fertilizers or pesticides and molecules like pancreatin as model substances simulating bird droppings. From these studies, it can be observed that the superhydrophobic coating, independently from the surface where it is applied, is able to repel water and substances used such as fertilizers or pesticides and substances simulating bird droppings, maintaining its properties and transparency. This kind of approach can provide information to design suitable spray formulations without the above-mentioned drawbacks to be used in natural environment areas and agrosolar plants.

Spheroid Formation and Recovery Using Superhydrophobic Coating for Regenerative Purposes

Cell therapies commonly pursue tissue stimulation for regenerative purposes by replacing cell numbers or supplying for functional deficiencies. To this aim, monodispersed cells are usually transplanted for incorporation by local injection. The limitations of this strategy include poor success associated with cell death, insufficient retention, or cell damage due to shear forces associated with the injection. Spheroids have recently emerged as a model that mimics an in vivo environment with more representative cell-to-cell interactions and better intercellular communication. Nevertheless, cost-effective and lab friendly fabrication and effectively performed recovery are challenges that restrict the broad application of spheroids. In this work, glass surfaces were modified with an environmentally friendly superhydrophobic coating. The superhydrophobic surfaces were used for the 3D spheroid preparation of fibroblasts (3T3 cell line) and keratinocytes (HaCaT cell line). The effectiveness of the spheroids to be recovered and grown under 2D culture conditions was evaluated. The morphology of the migrated cells from the 3D spheroids was characterized at the nano-microscale through 3D profilometry. The results demonstrated improved adhesion and proliferation in the migrated cells, both advanced properties for regenerative applications.

Comparison of Dust Deposition Reduction Performance by Super-Hydrophobic and Super-Hydrophilic Coatings for Solar PV Cells

Dust deposition on solar photovoltaic (PV) cells will dramatically reduce the photovoltaic power output. Self-cleaning coating may be a novel method to decrease dust deposition problems. This paper compares self-cleaning performances and mechanisms of super-hydrophobic and super-hydrophilic coating on dirt deposition decrease for solar photovoltaic cells by experimental measurement. In the process of the deposition of dust on solar cells, covering glass, coated and uncoated, is conducted under natural settling conditions. Moreover, the dust removal efficiency of the glass samples with and without coatings is studied under water spraying conditions. The wettability of different surfaces, dust deposition mass, dust removal efficiency, self-cleaning mechanisms, and transmittance of glass samples are investigated and analyzed. Under natural settling conditions, the deposition mass reduction ratio by the super-hydrophilic coating is only 8.1%, while it can reach 85.8% by the super-hydrophobic coating because of surface micro-structures and low surface energy. However, after the water spraying process, the remaining dust mass ratio for the super-hydrophobic surface is only 16.5%, while it is 18.6% for the super-hydrophilic surface. The self-cleaning mechanism of super-hydrophobic coating is that most deposited particles of dust are removed from glass samples by the rolling of liquid droplets. However, the self-cleaning mechanism of super-hydrophilic coating is the breakup of the liquid film. Therefore, both coatings can effectively reduce dust deposition under water spraying conditions. The average transmittance of super-hydrophobic and super-hydrophilic coatings after the water spraying process is 91.1% and 86.4%, respectively, while it is only 61.1% for the uncoated glass sample.

Mammalian Cell Spheroids on Mixed Organic–Inorganic Superhydrophobic Coating

Three-dimensional cell culture has become a reliable method for reproducing in vitro cellular growth in more realistic physiological conditions. The surface hydrophobicity strongly influences the promotion of cell aggregate formation. In particular, for spheroid formation, highly water-repellent coatings seem to be required for the significant effects of the process. In this work, surfaces at different wettability have been compared to observe their influence on the growth and promotion of aggregates of representative mammalian cell lines, both tumoral and non-tumoral (3T3, HaCat and MCF-7 cell lines). The effect of increased hydrophobicity from TCPS to agarose hydrogel to mixed organic–inorganic superhydrophobic (SH) coating has been investigated by optical and fluorescence microscopy, and by 3D confocal profilometry, in a time scale of 24 h. The results show the role of less wettable substrates in inducing the formation of spheroid-like cell aggregates at a higher degree of sphericity for the studied cell lines.

Transparent Self-Cleaning Coatings Based on Colorless Polyimide/Silica Sol Nanocomposite

We herein report transparent self-cleaning coatings based on polyimide-fluorinated silica sol (PIFSS) nanocomposite. Polyamic acid-silica sol (PASS) suspensions were synthesized by adding four different amounts of a silica sol suspension to each end-capped polyamic acid solution. The PASS suspensions were spin-coated on glass slides, thermally imidized and treated with triethoxy-1H,1H,2H,2H-perfluorodecylsilane (TEFDS) to prepare PIFSS coatings. The PIFSS coatings showed high resistance to separation from glass substrates and thermal stability. Furthermore, the PIFSS coatings on the glass substrate could be cleanly removed using polar aprotic solvents and repeated coating was possible. As the amount of silica sol particles in the PIFSS coating was increased, the hydrophobic contact angle increased. Among them, PIFSS-10 and PIFSS-15 coatings showed nearly superhydrophobic contact angles (144° and 148°, respectively) and good self-cleaning property. It was confirmed by SEM and AFM studies that their hydrophobic and self-cleaning properties are due to uniform particle distribution and relatively high surface roughness. PIFSS-10 coating showed a high transmittance value (88%) at 550 nm and good self-cleaning property, therefore suitable as a transparent self-cleaning coating. The advantages of the coating are that the fabrication process is simple, and the substrate is reusable. The PIFSS coating is expected to be applied in solar cell panels, windows, lenses and safety goggles.