Perspectives in Prevention of Biofilm for Medical Applications

Non-aureus staphylococci and mammaliicocci as a cause of mastitis in domestic ruminants: current knowledge, advances, biomedical applications, and future perspectives - a systematic review

Non-aureus staphylococci and mammaliicocci (NASM) are one of the most common causes of subclinical mastitis in dairy animals and the extent of damage by intramammary infections (IMI) caused by NASM is still under debate. The different effects of NASM on the mammary gland may be associated with differences between bacterial species. NASM are normal and abundant colonizers of humans and animals and become pathogenic only in certain situations. The veterinary interest in NASM has been intense for the last 25 years, due to the strongly increasing rate of opportunistic infections. Therefore, the objective of this review is to provide a general background of the NASM as a cause of mastitis and the most recent advances that exist to prevent and fight the biofilm formation of this group of bacteria, introduce new biomedical applications that could be used in dairy herds to reduce the risk of chronic and recurrent infections, potentially responsible for economic losses due to reduced milk production and quality. Effective treatment of biofilm infection requires a dual approach through a combination of antibiofilm and antimicrobial agents. Even though research on the development of biofilms is mainly focused on human medicine, this technology must be developed at the same time in veterinary medicine, especially in the dairy industry where IMI are extremely common.

The Antimicrobial Activity of Micron-Thin Sol-Gel Films Loaded with Linezolid and Cefoxitin for Local Prevention of Orthopedic Prosthesis-Related Infections

Orthopedic prosthesis-related infections (OPRI) are an essential health concern. OPRI prevention is a priority and a preferred option over dealing with poor prognosis and high-cost treatments. Micron-thin sol-gel films have been noted for a continuous and effective local delivery system. This study aimed to perform a comprehensive in vitro evaluation of a novel hybrid organic-inorganic sol-gel coating developed from a mixture of organopolysiloxanes and organophosphite and loaded with different concentrations of linezolid and/or cefoxitin. The kinetics of degradation and antibiotics release from the coatings were measured. The inhibition of biofilm formation of the coatings against Staphylococcus aureus, S. epidermidis, and Escherichia coli strains was studied, as well as the cell viability and proliferation of MC3T3-E1 osteoblasts. The microbiological assays demonstrated that sol-gel coatings inhibited the biofilm formation of the evaluated Staphylococcus species; however, no inhibition of the E. coli strain was achieved. A synergistic effect of the coating loaded with both antibiotics was observed against S. aureus. The cell studies showed that the sol-gels did not compromise cell viability and proliferation. In conclusion, these coatings represent an innovative therapeutic strategy with potential clinical use to prevent staphylococcal OPRI.

Monitoring biofilm growth and dispersal in real-time with impedance biosensors

Microbial biofilm contamination is a widespread problem that requires precise and prompt detection techniques to effectively control its growth. Microfabricated electrochemical impedance spectroscopy (EIS) biosensors offer promise as a tool for early biofilm detection and monitoring of elimination. This study utilized a custom flow cell system with integrated sensors to make real-time impedance measurements of biofilm growth under flow conditions, which were correlated with confocal laser scanning microscopy (CLSM) imaging. Biofilm growth on EIS biosensors in basic aqueous growth media (tryptic soy broth, TSB) and an oil-water emulsion (metalworking fluid, MWF) attenuated in a sigmoidal decay pattern, which lead to an ∼22-25% decrease in impedance after 24 Hrs. Subsequent treatment of established biofilms increased the impedance by ∼14% and ∼41% in TSB and MWF, respectively. In the presence of furanone C-30, a quorum-sensing inhibitor (QSI), impedance remained unchanged from the initial time point for 18 Hrs in TSB and 72 Hrs in MWF. Biofilm changes enumerated from CLSM imaging corroborated impedance measurements, with treatment significantly reducing biofilm. Overall, these results support the application of microfabricated EIS biosensors for evaluating the growth and dispersal of biofilm in situ and demonstrate potential for use in industrial settings.

ONE-SENTENCE SUMMARY

This study demonstrates the use of microfabricated electrochemical impedance spectroscopy (EIS) biosensors for real-time monitoring and treatment evaluation of biofilm growth, offering valuable insights for biofilm control in industrial settings.

Influence of Addition of Antibiotics on Chemical and Surface Properties of Sol-Gel Coatings

Infection is one of the most common causes that leads to joint prosthesis failure. In the present work, biodegradable sol-gel coatings were investigated as a promising controlled release of antibiotics for the local prevention of infection in joint prostheses. Accordingly, a sol-gel formulation was designed to be tested as a carrier for 8 different individually loaded antimicrobials. Sols were prepared from a mixture of MAPTMS and TMOS silanes, tris(tri-methylsilyl)phosphite, and the corresponding antimicrobial. In order to study the cross-linking and surface of the coatings, a battery of examinations (Fourier-transform infrared spectroscopy, solid-state ²⁹Si-NMR spectroscopy, thermogravimetric analysis, SEM, EDS, AFM, and water contact angle, thickness, and roughness measurements) were conducted on the formulations loaded with Cefoxitin and Linezolid. A formulation loaded with both antibiotics was also explored. Results showed that the coatings had a microscale roughness attributed to the accumulation of antibiotics and organophosphites in the surface protrusions and that the existence of chemical bonds between antibiotics and the siloxane network was not evidenced.

The Effect of Cu Additions on the Antibacterial Properties of Metallic Glassy Ni50TM50 (TM; Ti, Zr) Binary Systems

Antibacterial agents derived from classic organic compounds have been frequently employed for a number of years as a protective layer for biofilms. On the other hand, these agents often comprise dangerous components that, due to their interaction with toxic compounds, may be damaging to human beings. This hazard may be caused by the agents’ proximity to the toxic substances. Over the course of the past three decades, a variety of approaches, such as the utilization of a broad spectrum of metallic and oxide materials, have been the subject of research in order to develop a diverse selection of antibacterial coating layers that are acceptable. One of these approaches is the use of silver nanoparticles. It has been established that the cold spray technique, a solid-state method compatible with nanopowders, has shown higher performance and is the most effective strategy for coating materials. This has been proven via testing. It is possible to produce one-of-a-kind material coatings in ways that are not even remotely imaginable with any other thermal coating method, which is the primary reason for its prominence in contemporary production. The capacity to do so is what provides it with an advantage over its rivals in the market. This current study was conducted, in part, to investigate the effects of Cu-alloying elements on the antibacterial behavior of metallic glassy alloys on Ni50TM50 (TM; Ti, Zr) and Cu50TM40Ni10 (TM; Ti, Zr) systems prepared by the mechanical disordering technique, in conjunction with the cold spray method. These alloys were created by combining the mechanical disordering technique with the cold spray method. The arc melting process was employed to generate master alloys consisting of Ni50Ti50, Ni50Zr50, Cu50Ti40Ni10, and Cu50Zr40Ni10 for the purpose of this investigation. The master alloys were then used as feedstock materials for the creation of metallic glassy powders. Following the pulverization of the alloys of each system into a powdered form, the mixtures were charged through a high-energy ball milling operation for a duration of 50 h. Using the cold spray technique, the as-milled powders, which were metallic glasses, were applied singly in order to coat SUS304 sheets. The method was employed for this purpose. After the addition of Cu to the two binary Ni50TM50 (TM; Ti, Zr) alloys, the antibacterial properties of their corresponding metallic glassy phases were found to be significantly enhanced. This was shown by the fact that they were successful in preventing the development of biofilm by E. coli in contrast to the other systems that were evaluated.