Photocatalytic Properties of Doped TiO2 Coatings Deposited Using Reactive Magnetron Sputtering

Influence of Deposition Parameters of TiO2 + CuO Coating on the Membranes Surface Used in the Filtration Process of Dairy Wastewater on Their Functional Properties

A novel approach of the deposition of two-component coating consisting of TiO₂ and CuO on polymer membranes by MS-PVD method was presented in this work. This confirmed the possibility of using thin functional coatings for the modification of polymer membranes. The influence of technological parameters of the coating deposition on the membrane’s structure, chemical composition and functional properties (hydrophilic, photocatalytic and bactericidal properties) were analyzed using SEM. Model microorganism such as Escherichia coli and Bacillus subtilis have been used to check the antibacterial properties. The results indicated that doping with CuO highlights the potential of bactericidal efficiency. The surface properties of the membranes were evaluated with the surface free energy. For evaluating photocatalytic properties, the UV and visible light were used. The filtration tests showed that polymer membranes treated with two-component TiO₂ + CuO coatings have a permeate flux similar to the reference material (non-coated membrane). The obtained results constitute a very promising perspective of the potential application of magnetron sputtering for deposition of TiO₂ + CuO coatings in the prevention of biofouling resulted from the membrane filtration of dairy wastewater.

Marine Antibiofouling Properties of TiO2 and Ti-Cu-O Films Deposited by Aerosol-Assisted Chemical Vapor Deposition

The actual interest in developing light-induced catalytic coatings to act as an antibiofouling alternative has recently prompted interest in the incorporation of Cu into TiO2 films, working as a visible light sensitizer catalyst. TiO2 and new Ti-Cu-O films with Cu contents ranging between 16% and 75% Cu/(Cu + Ti) are deposited by aerosol-assisted metalorganic chemical vapor deposition at a substrate temperature of 550 °C. The films are composed of TiO2 anatase phase, mixed with Cu2O when including Cu in the composition. Pure TiO2 films’ morphologies are characterized by the formation of microflower-like structures with nanometric petals, which induce a high specific surface. These features are not present in Ti-Cu-O films. A UV-Visible study revealed that the optical band gap energy decreases with increasing Cu content. Interestingly, Ti-Cu-O films presented a highly photo-catalytic activity in the orange-G degradation. Marine biofouling field tests in Lorient’s Harbor in France and in vitro tests were carried out in order to evaluate the antifouling performance of the films, revealing that topography and chemical composition can act differently on different species. Field tests revealed that TiO2 microflowers reduced the fouling coverage. Besides, Ti-Cu-O films with 16 at.% Cu presented lower fouling coverage than films containing 58 at.% Cu. In vitro tests using two diatoms (P. tricornutum and N. perminuta) showed that the spaces between microflowers play a significant role in the adhesion of diatoms: microalgae adhere less when spaces are bigger than their cells, compared to when spaces are of the same size as cells. Films containing Cu did not alter N. perminuta growth nor adhesion, while they affected P. tricornutum by lowering its growth rate and adhesion without noticeable toxicity. Indeed, Cu-Ti-O is a very promising non-toxic fouling release film for marine and industrial applications.

Effect of Titanium Dioxide Film Thickness on Photocatalytic and Bactericidal Activities Against Listeria monocytogenes

Structural, microstructural and bactericidal surface properties of TiO₂ -coated glass substrates elaborated by reactive Radiofrequency sputtering are investigated. As pathogenic bacteria in biofilms are a major concern in food industries due to their growing resistance to cleaning and sanitizing procedures, the development of photoactive surfaces exhibiting bactericidal properties is acknowledged as an effective approach to tackle bacterial contaminations. Our principal aim concerns the study of the photoactive top-layer thickness impact (from 80 nm to ~500 nm) on Listeria monocytogenes. Structural characterization of the TiO₂ layers demonstrates that anatase and rutile phases are both present, depending on the film thickness. Photocatalytic activity of the samples has been evaluated through the degradation of aqueous methylene blue (MB) solutions under UVA light illumination for various time periods. The results show an efficiency rating increase according to TiO₂ film thickness up to a threshold value close to 400 nm. Moreover, a significant decrease of the adherent bacteria number is observed after 20 min of UVA illumination. The quantitative study of the bactericidal activity associated with scanning electron microscopy observations of the postprocess bacteria damaged cells demonstrates the efficiency of the 240-nm-thick TiO₂ coating sample. The results are correlated with the production of hydroxyl radicals during the process of photocatalysis.