Proposed Methods for Testing and Comparing the Emulsifying Properties of Proteins from Animal, Plant, and Alternative Sources

Formation mechanism, environmental sensitivity and functional characteristics of succinylated ovalbumin/ε-polylysine electrostatic complexes: The roles of succinylation modification and ε-polylysine combination

Biocomplex materials formed by oppositely charged biopolymers (proteins) tend to be sensitive to environmental conditions and may lose part functional properties of original proteins, and one of the approaches to address these weaknesses is protein modification. This study established an electrostatic composite system using succinylated ovalbumin (SOVA) and ε-polylysine (ε-PL) and investigated the impact of varying degrees of succinylation and ε-PL addition on microstructure, environmental responsiveness and functional properties. Molecular docking illustrated that the most favorable binding conformation was that ε-PL binds to OVA groove, which was contributed by the multi‑hydrogen bonding and hydrophobic interactions. Transmission electron microscopy observed that SOVA/ε-PL had a compact spherical structure with 100 nm. High-degree succinylation reduced complex sensitivity to heat, ionic strength, and pH changes. ε-PL improved the gel strength and antibacterial properties of SOVA. The study suggests possible uses of SOVA/ε-PL complex as multifunctional protein complex systems in the field of food additives.

Enhanced toxicity-free astaxanthin extraction from Haematococcus pluvialis via concurrent cell disruption and demulsification

The extraction of astaxanthin from Haematococcus pluvialis involves the utilization of petroleum-derived organic solvents or supercritical CO2, beset by safety concerns, high costs, and environmental sustainability limitations. This study, in contrast, employed a method involving the adjustment of salt concentration, propylene glycol, and vegetable oil fraction to disrupt emulsion in aqueous cell lysates for facilitating the separation of astaxanthin. Under optimized conditions, an astaxanthin-containing oil with a content of 1.88% was obtained even with the use of wet biomass, and four rounds of consecutive extraction resulted in a cumulative recovery yield of 66.41%. This process produced astaxanthin-enriched soybean oil with 9.49 times improved antioxidant capacity that satisfies a requirement for health functional application. Omitting the solvent removal and drying processes, which consume tremendous energy, can reduce the production cost by 2.98 times compared to conventional methods. Consequently, this study suggests an effective technique for producing edible oil containing H. pluvialis-derived astaxanthin.

Insights into the emulsification mechanism of the surfactant-like protein oleosin

Oleosins are proteins with a unique central hydrophobic hairpin designed to stabilize lipid droplets (oleosomes) in plant seeds. For efficient droplet stabilization, the hydrophobic hairpin with a strong affinity for the apolar droplet core is flanked by hydrophilic arms on each side. This gives oleosins a unique surfactant-like shape making them a very interesting protein. In this study, we tested if isolated oleosins retain their ability to stabilize oil-in-water emulsions, and investigated the underlying stabilization mechanism. Due to their surfactant-like shape, oleosins when dispersed in aqueous buffers associated to micelle-like nanoparticles with a size of ∼33 nm. These micelles, in turn, clustered into larger aggregates of up to 20 µm. Micelle aggregation was more extensive when oleosins lacked charge. During emulsification, oleosin micelles and micelle aggregates dissociated and mostly individual oleosins adsorbed on the oil droplet interface. Oleosins prevented the coalescence of the oil droplets and if sufficiently charged, droplet flocculation as well.

The role of polysaccharides in improving the functionality of zein coated nanocarriers: Implications for colloidal stability under environmental stresses

Zein has gained popularity over the past few years as an incredible food and bio-based materials. The potential functions and health benefits of zein microcapsules or micro-/nanoparticles in bioactive components delivery, structured emulsion, etc., have received great attention. However, the development has been limited by colloidal destabilization, especially when thermal processing is involved. There is a recent trend in developing zein-polysaccharide complexes (ZPCs), which has tremendously improved the performance of zein-based colloidal carrier systems or emulsions. Increasing our understanding of zein interactions and their contribution to the structure of various macromolecules can help us to develop novel biomaterials that can be used in food, agriculture, biomedicine, and cosmetics. In addition, these nanocarriers are suitable for the encapsulation and delivery of bioactive compounds which have positive perspective in food industry. Therefore, this article aimed to review recent advances in the ZPCs that can be applied to functional or health-promoting foods, with a focus on the characteristics of different ZPCs, factors and mechanisms affecting the stability (especially thermal stability) of these complexes, and their application in food industry as a carrier for BCs. Further, the stability of ZPCs based emulsions under processing and physiological environments, as well some typical effective methods are introduced. Also, the principal challenges and prospects were enumerated and discussed.

α-tending emulsifiers, microencapsulated improver powder and bakery applications

To date majority of bakery products are manufactured using emulsifiers in paste or gel form that restricts and causes many problems of storage, processing, and handling at the commercial level. Therefore, new developments are required to resolve the issues of the bakery industry. This review discusses the importance of α-tending emulsifiers in the bakery industry and the action of the α-form to produce superior quality products. Further, to produce desired results α-form of emulsifiers blend should be stable and functional at different operating and storage conditions. Emulsifiers in gel or paste form do not maintain the active α-gel phase over a longer storage period. Using emulsifiers blend in powder form can be a solution to all the mentioned difficulties. With the development of new technologies like spray drying and encapsulation has opened new doors to utilize emulsifiers blend in powder form. Few manufactures have tapped this opportunity and have developed improver powder that offers superior quality products as well as processing, storage, and handling benefits and is easy to use. Improver powder maintains its active and functional α-form when stored at ambient temperature. This development also increases the scope of dry premixes in the market and consumers can make products of their choice in the kitchen with minimal effort.

Fast Interfacial Polymerization for Stabilizing Emulsion Droplets with Polymer Films beyond Emulsifiers

Stabilizing emulsion droplets with amphiphilic emulsifiers are the current prevailing method, but the extensive use of such amphiphilic substances has caused widespread concerns. In this Perspective, three traditional methods for the stabilization of emulsion droplets according to the type of emulsifiers used are outlined, and the emphasis is placed on the mechanism of steric hindrance for emulsion stabilization. Then, we provide a concise introduction and discussion of the fast interfacial polymerization method as a new strategy for preparing stable emulsifier-free emulsion droplets with a polymer film, including its research background, current progress, and possible development directions. It is anticipated that this paper will promote the development of emulsifier-free emulsion production via fast interfacial polymerization and other related methods.

The influence of ionic polysaccharides on the physicochemical and techno-functional properties of soy proteins; a comprehensive review

Since the world's population has surged in recent decades, the need for sustainable as well as environmentally friendly protein sources is growing. However, there are daunting challenges in utilizing these protein sources in the food industry due to their poor techno-functional properties compared with animal proteins. Numerous procedures have been introduced to improve plant protein functionalities with related pros and cons. Among them, complexation with polysaccharides is considered a safe and effective process for modulating plant proteins' technological and industrial applications. Notwithstanding the nutritional value of soy protein (SP) as a "complete protein," it is a crucial protein commercially because of its rank as the highest-traded plant-based protein worldwide. The current review deals with SP complexation with ionic polysaccharides, including chitosan, alginate, carrageenan, and xanthan gum, and their effects on the physicochemical and techno-functional properties of SP. Accordingly, the structure of SP and the abovementioned polysaccharides have been considered for a better understanding of the possible interactions. Then, the changes in the physicochemical and functional properties of SP and their potential applications in the formulation of plant-based food products have been discussed. Overall, ionic polysaccharides at optimum conditions would improve the functional properties of SP by altering its secondary structure, making it suitable for a wide range of applications in the food industry.

Yellow Field Pea Protein (Pisum sativum L.): Extraction Technologies, Functionalities, and Applications

Yellow field peas (Pisum sativum L.) hold significant value for producers, researchers, and ingredient manufacturers due to their wealthy composition of protein, starch, and micronutrients. The protein quality in peas is influenced by both intrinsic factors like amino acid composition and spatial conformations and extrinsic factors including growth and processing conditions. The existing literature substantiates that the structural modulation and optimization of functional, organoleptic, and nutritional attributes of pea proteins can be obtained through a combination of chemical, physical, and enzymatic approaches, resulting in superior protein ingredients. This review underscores recent methodologies in pea protein extraction aimed at enhancing yield and functionality for diverse food systems and also delineates existing research gaps related to mitigating off-flavor issues in pea proteins. A comprehensive examination of conventional dry and wet methods is provided, in conjunction with environmentally friendly approaches like ultrafiltration and enzyme-assisted techniques. Additionally, the innovative application of hydrodynamic cavitation technology in protein extraction is explored, focusing on its prospective role in flavor amelioration. This overview offers a nuanced understanding of the advancements in pea protein extraction methods, catering to the interests of varied stakeholders in the field.

Assessing the emulsifying properties of Tenebrio molitor larvae protein preparations: Impact of storage, thermal, and freeze-thaw treatments on o/w emulsion stability

Insect proteins have gained attention as novel ingredients, which may contribute to the development of high-value-added products. This study evaluates the emulsifying and emulsion-stabilizing properties of Tenebrio molitor larvae protein preparations obtained through different procedures, leading to the following rich-in-protein samples: ASP (∼67 %), AIP (∼75 %), and SSP (∼62 %). The method applied for protein isolation influenced the molecular and structural characteristics of the preparations, thus affecting their adsorption behaviour at oil-water interfaces and ability to stabilize emulsions. O/w emulsions were prepared, and their physicochemical stability was assessed with respect to droplet size, oil droplet flocculation/coalescence, microstructure, and creaming upon storage as well as after thermal and freeze-thaw treatments. The use of ASP and AIP protein preparation as emulsifiers led to higher stability during storage. All emulsions were stable upon heating and able to withstand two freeze-thaw cycles without phase separation, although there was an increase in droplet size. Interestingly, the AIP emulsion remained stable after the 3rd freeze-thaw cycle, indicating remarkable stability under freezing compared to the other two emulsions. These findings are of great importance for the formulation of food-grade emulsions using insect protein preparations and their future exploitation in developing food items subjected to different treatments.

Structure and physical stability of plant-based food gel systems: Impact of protein (mung bean, pea, potato, soybean) and fat (coconut, sunflower)

Despite their popularity, plant-based food gel systems (GS) sometimes have suboptimal texture compared to animal-based products. Therefore, 4 commercial plant proteins (from mung bean, pea, potato and soybean) and 2 commercial plant fats (sunflower oil and coconut fat) in 2 contents (7.5 wt% and 17.5 wt%) were evaluated towards their contribution to structure and physical stability a lean (LGS, no fat) and an emulsified GS (EGS). Generally, protein source had a larger effect on structure and physical stability than fat source and content. Unheated, GS with soybean protein showed most structure and highest physical stability. Heated till 94 °C, the structure of GS increased drastically, but EGS showed less structure than LGS, attributed to low solid fat contents (SFC), hence low rigidity, of the incorporated oil droplets at 94 °C. Cooled till 5 °C all GS showed an additional increase in structure, for GS with mung bean and pea protein accompanied with an increase in physical stability. Overall, EGS with sunflower oil showed less structure and lower stability than EGS with coconut fat, likely due to their different SFC. At 5 °C, Peak force of GS with potato protein was highest. Across protein sources, EGS displayed a higher Peak force with coconut fat than with sunflower oil, again likely due to different SFC, hence, rigidity of the oil droplets. Physical stability of GS did not vary significantly between protein sources, fat sources nor fat contents, after a freeze-thaw cycle, nor during prolonged cold storage.

Development of Avocado and Lemon Oil Emulgels Based on Natural Products: Phycocyanin and Pectin

Phycocyanin (PC), a natural product obtained from algae, is attracting attention due to its health benefits, such as its antioxidant and anti-inflammatory properties. This work studies the use of PC as the main stabilizer in avocado and lemon oil emulgels, a format for drug delivery. The influence of PC concentration on droplet size distribution, rheological properties, and physical stability is studied using a laser diffraction technique, rheological measurements, and multiple light scattering. The 5 wt.% PC emulsions show the lowest droplet size and, consequently, the best stability against creaming and droplet growth. Emulsions formulated with PC as the only stabilizer show a slight pseudoplastic character with an apparent viscosity below 10 mPa·s at 2 Pa. This indicates that these emulsions undergo creaming with aging time. In order to reduce creaming, pectin is incorporated into the 5 wt.% PC emulsion at different concentrations. Interestingly, yield stress and an incipient gel character are observed due to the presence of pectin. This is why the creaming mechanism is reduced. In conclusion, PC forms a layer that protects the interface against coalescence and Ostwald ripening. And, pectin is incorporated to reduce creaming. This research has the potential to make valuable contributions to diverse fields, such as health, medicine, and encapsulation technology.

Lomustine's nanoemulsion as nose-to-brain drug delivery system for CNS tumor treatment

Nose-to-brain delivery allows the direct targeting of drug molecules bypassing the Blood Brain Barrier and systemic effect. Nanoemulsion is one of the novel strategies to deliver drug in this route due to its simplicity in manufacturing, long-term stability, and strong solubilization property for drug. The anticancer drug lomustine had poor oral bioavailability in addition to its serious side effect, therefore, developing more effective drug delivery with direct targeting towards the brain through intra-nasal administration applying nanoemulsion technology is a promising alternative. The work involved lomustine solubility screening in oils, surfactants and cosurfactants as well as emulsifier ratio (Smix) nanoemulsion area was identified using pseudo-ternary phase diagrams. Eighteen nanoemulsion formulas were produced for optimization, then characterized for droplet size, polydispersity index, zeta potential, entrapment efficiency, conductivity, transmittance, dilution, visual transparency, physical stability and in vitro release. The optimum NE formula showed droplet size, zeta potential, polydispersity index, entrapment efficiency, %transmittance, conductivity of 31.31 nm, -30.65 mV, 0.159, 98.12%, 99.08%, and 951 us/cm, respectively. The best formula released 100% lomustine within 15 min which is a promising potential drug delivery system that may deliver the drug quickly and directly to the brain as a safe and effective alternative to oral delivery.

Foaming and Other Functional Properties of Freeze-Dried Mare's Milk

The aim of this study was to evaluate the effect of the freeze-drying process on the preservation of mare's milk. This was achieved through the characterization of the functional properties of reconstituted freeze-dried mare's milk. The chemical composition, bulk density, foam capacity, and ability to form emulsions of the atherogenic, thrombogenic, and hypercholesterolemic fatty acid index were investigated. The freeze-drying process did not change the proportion of the milk components in the dry matter. The moisture content of the freeze-dried mare's milk was 10.3 g/kg and the bulk was below 0.1 g/mL. The foaming capacity was 111.3%; hence, the foaming capacity of the milk was very poor. The oil binding capacity was 2.19 g/g of protein. The freeze-drying process improves the binding degree and retention of oil by milk proteins, but produced foam was unstable, short-lived, and lacked the ability to retain air fractions. The atherogenic index and thrombogenic index values calculated for reconstituted milk were 1.02 and 0.53, respectively. The hypercholesterolemia fatty acid index was 25.01.

Impact of Operating Parameters on the Production of Nanoemulsions Using a High-Pressure Homogenizer with Flow Pattern and Back Pressure Control

The main objective of this study was to establish the relative importance of the main operating parameters impacting the formation of food-grade oil-in-water nanoemulsions by high-pressure homogenization. The goal of this unit operation was to create uniform and stable emulsified products with small mean particle diameters and narrow polydispersity indices. In this study, we examined the performance of a new commercial high-pressure valve homogenizer, which has several features that provide good control over the particle size distribution of nanoemulsions, including variable homogenization pressures (up to 45,000 psi), nozzle dimensions (0.13/0.22 mm), flow patterns (parallel/reverse), and back pressures. The impact of homogenization pressure, number of passes, flow pattern, nozzle dimensions, back pressure, oil concentration, emulsifier concentration, and emulsifier type on the particle size distribution of corn oil-in-water emulsions was systematically examined. The droplet size decreased with increasing homogenization pressure, number of passes, back pressure, and emulsifier-to-oil ratio. Moreover, it was slightly smaller when a reverse rather than parallel flow profile was used. The emulsifying performance of plant, animal, and synthetic emulsifiers was compared because there is increasing interest in replacing animal and synthetic emulsifiers with plant-based ones in the food industry. Under fixed homogenization conditions, the mean particle diameter decreased in the following order: gum arabic (0.66 µm) > soy protein (0.18 µm) > whey protein (0.14 µm) ≈ Tween 20 (0.14 µm). The information reported in this study is useful for the optimization of the production of food-grade nanoemulsions using high-pressure homogenization.

Effect of Enzymatic Hydrolysis on Solubility and Emulsifying Properties of Lupin Proteins (Lupinus luteus)

Solubility and emulsifying properties are important functional properties associated with proteins. However, many plant proteins have lower techno-functional properties, which limit their functional performance in many formulations. Therefore, the objective of this study was to investigate the effect of protein hydrolysis by commercial enzymes to improve their solubility and emulsifying properties. Lupin protein isolate (LPI) was hydrolyzed by 7 commercial proteases using different E/S ratios and hydrolysis times while the solubility and emulsifying properties were evaluated. The results showed that neutral and alkaline proteases are most efficient in hydrolyzing lupin proteins than acidic proteases. Among the proteases, Protamex® (alkaline protease) showed the highest DH values after 5 h of protein hydrolysis. Meanwhile, protein solubility of LPI hydrolysates was significantly higher (p < 0.05) than untreated LPI at all pH analyzed values. Moreover, the emulsifying capacity (EC) of undigested LPI was lower than most of the hydrolysates, except for acidic proteases, while emulsifying stability (ES) was significantly higher (p < 0.05) than most LPI hydrolysates by acidic proteases, except for LPI hydrolyzed with Acid Stable Protease with an E/S ratio of 0.04. In conclusion, the solubility, and emulsifying properties of lupin (Lupinus luteus) proteins can be improved by enzymatic hydrolysis using commercial enzymes.

A Review of Pickering Emulsions: Perspectives and Applications

Pickering emulsions are systems composed of two immiscible fluids stabilized by organic or inorganic solid particles. These solid particles of certain dimensions (micro- or nano-particles), and desired wettability, have been shown to be an alternative to conventional emulsifiers. The use of biodegradable and biocompatible stabilizers of natural origin, such as clay minerals, presents a promising future for the development of Pickering emulsions and, with this, they deliver some advantages, especially in the area of biomedicine. In this review, the effects and characteristics of microparticles in the preparation and properties of Pickering emulsions are presented. The objective of this review is to provide a theoretical basis for a broader type of emulsion, in addition to reviewing the main aspects related to the mechanisms and applications to promote its stability. Through this review, we highlight the use of this type of emulsion and its excellent properties as permeability promoters of solid particles, providing ideal results for local drug delivery and use in Pickering emulsions.