Flexible and Structural Coloured Composite Films from Cellulose Nanocrystals/Hydroxypropyl Cellulose Lyotropic Suspensions

Angle-resolved optical spectroscopy of photonic cellulose nanocrystal films reveals the influence of additives on the mechanism of kinetic arrest

Cellulose nanocrystals (CNCs) are rod-like nanoparticles whose chiral self-assembly into photonic films has been promoted as a sustainable source of colouration. Upon drying, an aqueous CNC suspension passes through two regimes: first, a liquid phase, where the CNCs self-organise into a cholesteric liquid crystal, followed by a kinetically-arrested phase, where the helicoidal structure compresses upon loss of solvent, resulting in a solid film with vibrant structural colour. The transition between these two regimes plays an important role in the visual appearance of photonic CNC films, but details on when and how kinetic arrest occurs have remained elusive. In this work, we combine angle-resolved optical spectroscopy of photonic films (approx. 100 vol% CNC) with a model for compressed helicoidal structures to retrieve the suspension conditions during kinetic arrest (approx. 10 vol% CNC). This analysis indicates a shift in the mechanism of kinetic arrest from a glass transition at lower ionic strength to gelation at higher ionic strength, explaining the trends in domain size and film colour. In contrast, neutral additives (glucose, poly(ethylene glycol)) appear to primarily reduce the compression upon drying without affecting cholesteric behaviour, as supported by a general analytical model. These findings deepen our understanding of CNC co-assembly with various commonly-used additives, enabling better control over the production of multifunctional structurally coloured materials.

Water and Oxygen Barrier Properties of All-Cellulose Nanocomposites

Hydroxypropyl cellulose (HPC) is potentially interesting as a biobased, rigid food packaging material, but its stiffness and strength are somewhat low, and its water and oxygen transport rates are too high. To improve these characteristics, we investigated nanocomposites of HPC and cellulose nanocrystals (CNCs). These high-aspect-ratio nanoparticles display high stiffness and strength, and their high crystallinity renders them virtually impermeable. Exchanging the counterions of sulfate-ester decorated CNCs with cetyltrimethylammonium ions affords particles that are dispersible in ethanol (CTA.CNC) and allows solvent casting of HPC/CTA.CNC nanocomposite films, which, even at a CTA.CNC content of 90 wt %, are highly transparent. The introduction of CTA.CNC considerably increases the Young's modulus (Ey) and upper tensile strength (σUTS). For example, in the nanocomposite with 90% CTA.CNC, Ey = 7.6 GPa is increased 20-fold and σUTS = 42.7 MPa is more than doubled in comparison to HPC, whereas the extensibility (1.1%) remains appreciable. Composites with a CTA.CNC content of 70 wt % or less show a lower water vapor permeability (6.4-9.2 × 10-5 g μm m-2 s-1 Pa-1) than the neat HPC (1.5 × 10-4 g μm m-2 s-1 Pa-1), whereas the oxygen permeability (5.6 × 10-7-1.3 × 10-6 cm3 μm m-2 s-1 Pa-1) is reduced by 1 order of magnitude compared to HPC (3.2 × 10-6 cm3 μm m-2 s-1 Pa-1). The biobased nanocomposites retain their mechanical integrity at a relative humidity of 75% but readily disintegrate in water.

Inkjet Printed Photonic Cellulose Nanocrystal Patterns

Naturally-sourced cellulose nanocrystals (CNCs) are elongated, birefringent nanoparticles that can undergo cholesteric self-assembly in water to produce vibrant, structurally colored films. As such, they are an ideal candidate for use as sustainable and cost-effective inks in the printing of scalable photonic coatings and bespoke patterns. However, the small volume and large surface area of a sessile CNC drop typically leads to rapid evaporation, resulting in microfilms with a coffee-stain-like morphology and very weak coloration. Here, it is demonstrated that inkjet printing of CNC drops directly through an immiscible oil layer can immediately inhibit water loss, resulting in reduced internal mass flows and greater time for cholesteric self-assembly. The color of each microfilm is determined by the initial composition of the drop, which can be tuned on-demand by exploiting the overprinting and coalescence of multiple smaller drops of different inks. This enables the production of multicolored patterns with complex optical behaviors, such as angle-dependent color and polarization-selective reflection. Finally, the array can be made responsive to stimuli (e.g., UV light, polar solvent) by the inclusion of a degradable additive. This suite of functional properties promotes inkjet-printed photonic CNC arrays for smart colorimetric labeling or optical anticounterfeiting applications.

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

Polymer-Stabilized Cholesteric Liquid Crystal Films with Double Reflection Bands Prepared Based on the Competition between Photopolymerization and Photoisomerization

Composite colors have been widely found in nature. Herein, polymer-stabilized cholesteric liquid crystal (PSCLC) films with composite structural colors were prepared through a one-step photopolymerization approach. The CLC mixtures were prepared using a mixture of acrylates and a mixture of two chiral dopants. One of the chiral dopants is polymerizable, and the other one is photoisomerizable. After photopolymerization, the PSCLC films with double Bragg reflection bands were obtained on the surface of a substrate. The competition between the photopolymerization of the acrylates and the photoisomerization of the chiral dopant was proposed to drive the formation of the double reflection bands. Without oxygen inhibition, the polymerization of the acrylates near the substrate surface was carried out. However, due to oxygen inhibition, the polymerization of the acrylates near the air was retarded. Then, the photoisomerization of the chiral dopant was carried out prior to the polymerization of the acrylates. The wavelengths of the double reflection bands were tunable by changing the concentrations of the acrylates and chiral dopants and the polymerization temperature. Colorful patterns with composite structural colors were prepared, which were suitable for decoration and anti-counterfeiting.

Bioinspired Photonic Materials from Cellulose: Fabrication, Optical Analysis, and Applications

Polysaccharides are a class of biopolymers that are widely exploited in living organisms for a diversity of applications, ranging from structural reinforcement to energy storage. Among the numerous types of polysaccharides found in the natural world, cellulose is the most abundant and widespread, as it is found in virtually all plants. Cellulose is typically organized into nanoscale crystalline fibrils within the cell wall to give structural integrity to plant tissue. However, in several species, such fibrils are organized into helicoidal nanostructures with a periodicity comparable to visible light (i.e., in the range 250-450 nm), resulting in structural coloration. As such, when taking bioinspiration as a design principle, it is clear that helicoidal cellulose architectures are a promising approach to developing sustainable photonic materials. Different forms of cellulose-derived materials have been shown to produce structural color by exploiting self-assembly processes. For example, crystalline nanoparticles of cellulose can be extracted from natural sources, such as cotton or wood, by strong acid hydrolysis. Such "cellulose nanocrystals" (CNCs) have been shown to form colloidal suspensions in water that can spontaneously self-organize into a cholesteric liquid crystal phase, mimicking the natural helicoidal architecture. Upon drying, this nanoscale ordering can be retained into the solid state, enabling the specific reflection of visible light. Using this approach, colors from across the entire visible spectrum can be produced, alongside striking visual effects such as iridescence or a metallic shine. Similarly, polymeric cellulose derivatives can also organize into a cholesteric liquid crystal. In particular, edible hydroxypropyl cellulose (HPC) is known to produce colorful mesophases at high concentrations in water (ca. 60-70 wt %). This solution state behavior allows for interesting visual effects such as mechanochromism (enabling its use in low-cost colorimetric pressure or strain sensors), while trapping the structure into the solid state enables the production of structurally colored films, particles and 3D printed objects. In this article, we summarize the state-of-the-art for CNC and HPC-based photonic materials, encompassing the underlying self-assembly processes, strategies to design their photonic response, and current approaches to translate this burgeoning green technology toward commercial application in a wide range of sectors, from packaging to cosmetics and food. This overview is supported by a summary of the analytical techniques required to characterize these photonic materials and approaches to model their optical response. Finally, we present several unresolved scientific questions and outstanding technical challenges that the wider community should seek to address to develop these sustainable photonic materials.

Insights into thermal degradation kinetics and liquid crystalline behavior of cellulose nanocrystals from the waste of Cajanus cajan (pigeon pea)

Cellulose nanocrystals (CNCs) are essential for advancing nanotechnology and modern science. This work used the Cajanus cajan stem, an agricultural waste, as a lignocellulosic mass, which can serve as a supply of CNCs. After extraction from the Cajanus cajan stem, CNCs have been thoroughly characterized. FTIR (Infrared Spectroscopy) and ssNMR (solid-state Nuclear Magnetic Resonance) successfully validated eliminating additional components from the waste stem. The ssNMR and XRD (X-ray diffraction) were utilized to compare the crystallinity index. For structural analysis, the XRD of cellulose I_β was simulated to compare with the extracted CNCs. Various mathematical models inferred thermal stability and its degradation kinetics to ensure its high-end applications. Surface analysis established the rod-like shape of the CNCs. Rheological measurements were performed to gauge the liquid crystalline properties of CNC. The anisotropic liquid crystalline CNCs' birefringence proves that the Cajanus cajan stem is a promising resource for making CNCs for cutting-edge applications.

Cellulose Nanocrystal Aqueous Colloidal Suspensions: Evidence of Density Inversion at the Isotropic-Liquid Crystal Phase Transition

The colloidal suspensions of aqueous cellulose nanocrystals (CNCs) are known to form liquid crystalline (LC) systems above certain critical concentrations. From an isotropic phase, tactoid formation, growth, and sedimentation have been determined as the genesis of a high-density cholesteric phase, which, after drying, originates solid iridescent films. Herein, the coexistence of a liquid crystal upper phase and an isotropic bottom phase in CNC aqueous suspensions at the isotropic-nematic phase separation is reported. Furthermore, isotropic spindle-like domains are observed in the low-density LC phase and high-density LC phases are also prepared. The CNCs isolated from the low- and high-density LC phases are found to have similar average lengths, diameters, and surface charges. The existence of an LC low-density phase is explained by the presence of air dissolved in the water present within the CNCs. The air dissolves out when the water solidifies into ice and remains within the CNCs. The self-adjustment of the cellulose chain conformation enables the entrapment of air within the CNCs and CNC buoyancy in aqueous suspensions.

Analysis of the In Vitro Toxicity of Nanocelluloses in Human Lung Cells as Compared to Multi-Walled Carbon Nanotubes

Cellulose micro/nanomaterials (CMNM), comprising cellulose microfibrils (CMF), nanofibrils (CNF), and nanocrystals (CNC), are being recognized as promising bio-nanomaterials due to their natural and renewable source, attractive properties, and potential for applications with industrial and economical value. Thus, it is crucial to investigate their potential toxicity before starting their production at a larger scale. The present study aimed at evaluating the cell internalization and in vitro cytotoxicity and genotoxicity of CMNM as compared to two multi-walled carbon nanotubes (MWCNT), NM-401 and NM-402, in A549 cells. The exposure to all studied NM, with the exception of CNC, resulted in evident cellular uptake, as analyzed by transmission electron microscopy. However, none of the CMNM induced cytotoxic effects, in contrast to the cytotoxicity observed for the MWCNT. Furthermore, no genotoxicity was observed for CNF, CNC, and NM-402 (cytokinesis-block micronucleus assay), while CMF and NM-401 were able to significantly raise micronucleus frequency. Only NM-402 was able to induce ROS formation, although it did not induce micronuclei. Thus, it is unlikely that the observed CMF and NM-401 genotoxicity is mediated by oxidative DNA damage. More studies targeting other genotoxicity endpoints and cellular and molecular events are underway to allow for a more comprehensive safety assessment of these nanocelluloses.

Genotoxicity of Three Micro/Nanocelluloses with Different Physicochemical Characteristics in MG-63 and V79 Cells

(1) Background: Nanocellulose is an innovative engineered nanomaterial with an enormous potential for use in a wide array of industrial and biomedical applications and with fast growing economic value. The expanding production of nanocellulose is leading to an increased human exposure, raising concerns about their potential health effects. This study was aimed at assessing the potential toxic and genotoxic effects of different nanocelluloses in two mammalian cell lines; (2) Methods: Two micro/nanocelluloses, produced with a TEMPO oxidation pre-treatment (CNFs) and an enzymatic pre-treatment (CMFs), and cellulose nanocrystals (CNCs) were tested in osteoblastic-like human cells (MG-63) and Chinese hamster lung fibroblasts (V79) using the MTT and clonogenic assays to analyse cytotoxicity, and the micronucleus assay to test genotoxicity; (3) Results: cytotoxicity was observed by the clonogenic assay in V79 cells, particularly for CNCs, but not by the MTT assay; CNF induced micronuclei in both cell lines and nucleoplasmic bridges in MG-63 cells; CMF and CNC induced micronuclei and nucleoplasmic bridges in MG-63 cells, but not in V79 cells; (4) Conclusions: All nanocelluloses revealed cytotoxicity and genotoxicity, although at different concentrations, that may be related to their physicochemical differences and availability for cell uptake, and to differences in the DNA damage response of the cell model.

Water Dynamics in Composite Aqueous Suspensions of Cellulose Nanocrystals and a Clay Mineral Studied through Magnetic Resonance Relaxometry

¹H spin-lattice relaxation time (T₁) measurements were performed to probe the dynamic behavior of water in aqueous suspensions of cellulose nanocrystals (CNCs) and a layered smectite clay mineral with different degrees of concentration. ¹H-T₁ experiments were carried out over a wide frequency domain, ranging from a few kilohertz to 500 MHz, with the aid of conventional and fast field cycling nuclear magnetic resonance (NMR) techniques. The experimental relaxometry data illustrate differences between the dynamic behavior of bulk water and that confined in the vicinity of CNC-clay surfaces. Clay alone in moderate concentration was found to enforce almost no effect on the water dynamics, whereas introducing CNCs to the system presented a significantly enhanced relaxivity. The modeling of the relaxation dispersions allowed the determination of dynamical processes and variables explaining the dynamic behavior of water in CNC-clay suspensions. It turned out that reorientations mediated by translational displacements are a leading NMR relaxation mechanism for water interacting with the surfaces of CNC-clay particles in the low-frequency domain. In the high-frequency regime, however, the inner-sphere paramagnetic relaxation mechanism dominates, which is caused by the interaction of water protons with dissolved Fe ions.

An Overview of Cellulose Derivatives-Based Dressings for Wound-Healing Management

Presently, notwithstanding the progress regarding wound-healing management, the treatment of the majority of skin lesions still represents a serious challenge for biomedical and pharmaceutical industries. Thus, the attention of the researchers has turned to the development of novel materials based on cellulose derivatives. Cellulose derivatives are semi-synthetic biopolymers, which exhibit high solubility in water and represent an advantageous alternative to water-insoluble cellulose. These biopolymers possess excellent properties, such as biocompatibility, biodegradability, sustainability, non-toxicity, non-immunogenicity, thermo-gelling behavior, mechanical strength, abundance, low costs, antibacterial effect, and high hydrophilicity. They have an efficient ability to absorb and retain a large quantity of wound exudates in the interstitial sites of their networks and can maintain optimal local moisture. Cellulose derivatives also represent a proper scaffold to incorporate various bioactive agents with beneficial therapeutic effects on skin tissue restoration. Due to these suitable and versatile characteristics, cellulose derivatives are attractive and captivating materials for wound-healing applications. This review presents an extensive overview of recent research regarding promising cellulose derivatives-based materials for the development of multiple biomedical and pharmaceutical applications, such as wound dressings, drug delivery devices, and tissue engineering.

Chiral Cellulose Nanocrystal Humidity-Responsive Iridescent Films with Glucan for Tuned Iridescence and Reinforced Mechanics

The fabrication of biomimetic photonic materials with environmental stimuli-responsive functions from entirely biobased materials is becoming increasingly challenging with the growing demand for biodegradable materials. Herein, the effect of glucan with different molecular weights on the mechanical performance and tunable structural color of iridescent CNC composite films was investigated. The existence of glucan did not influence the self-assembly performance of CNCs, but rather led to an improvement in the mechanical performance, enabling cholesteric CNC composite films with an adjustable structural color. Simultaneously, the iridescent films showed a conspicuous redshift and enlarged initial pitch without obstruction of the chiral structure. In response to environmental humidity, the structural colors of the iridescent composite films can be changed by regulating their chiral nematic structure. In particular, the films demonstrate a reversible structural color change between blue and red at RH between 50 and 98%. The resulting biobased iridescent composite films have potential applications in decorative coating, optical and humidity sensing, and anticounterfeiting.

Mechanochromic, Structurally Colored, and Edible Hydrogels Prepared from Hydroxypropyl Cellulose and Gelatin

Hydroxypropyl cellulose (HPC) is an edible, cost-effective and widely used derivative of cellulose. Under lyotropic conditions in water, HPC forms a photonic, liquid crystalline mesophase with an exceptional mechanochromic response. However, due to insufficient physical cross-linking photonic HPC can flow freely as a viscous liquid, preventing the exploitation of this mechanochromic material in the absence of any external encapsulation or structural confinement. Here this challenge is addressed by mixing HPC and gelatin in water to form a self-supporting, viscoelastic, and edible supramolecular photonic hydrogel. It is demonstrated that the structural coloration, mechanochromism and non-Newtonian shear-thinning behavior of the lyotropic HPC solutions can all be retained into the gel state. Moreover, the rigidity of the HPC-gel provides a 69% shorter mechanochromic relaxation time back to its initial color when compared to the liquid HPC-water only system, broadening the dynamic color range of HPC by approximately 2.5× in response to a compressive pressure. Finally, the ability to formulate the HPC-gels in a scalable fashion from only water and "food-grade" constituents unlocks a wide range of potential applications, from response-tunable mechanochromic materials and colorant-free food decoration, to short-term sensors in, for example, biodegradable "smart labels" for food packaging.