Antioxidant Materials Based on 2D Nanostructures: A Review on Recent Progresses

Conjugated Network Supporting Highly Surface-Exposed Ru Site-Based Artificial Antioxidase for Efficiently Modulating Microenvironment and Alleviating Solar Dermatitis

Solar dermatitis, a form of acute radiation burn that affects the skin, results from overexposure to ultraviolet B (UVB) radiation in strong sunlight. Cell damage caused by the accumulation of reactive oxygen species (ROS) produced by UVB radiation plays an important role in UVB-induced inflammation in the skin. Here, for efficiently scavenging excess ROS, modulating the microenvironment, and alleviating solar dermatitis, a π-conjugated network polyphthalocyanine supporting a highly surface-exposed Ru active site-based artificial antioxidase (HSE-PPcRu) is designed and fabricated with excellent ROS-scavenging, antioxidant, and anti-inflammatory capabilities. In photodamaged human keratinocyte cells, HSE-PPcRu could modulate mitogen-activated protein kinase (MAPK) and nuclear factor kappa-B signaling pathways, prevent DNA damage, suppress apoptosis, inhibit pro-inflammatory cytokine secretion, and alleviate cell damage. In vivo animal experiments reveal the higher antioxidant and anti-inflammatory efficacies of HSE-PPcRu by reversing the activation of p38 and c-Jun N-terminal kinase, inhibiting expression of cyclooxygenase-2, interleukin-6, interleukin-8, and tumor necrosis factor-α. This work not only provides an idea for alleviating solar dermatitis via catalytically scavenging ROS and modulating the microenvironment but also offers a strategy to design an intelligent conjugated network-based artificial antioxidase with a highly surface-exposed active site.

Manganese-Based Antioxidase-Inspired Biocatalysts with Axial Mn-N5 Sites and 2D d-π-Conjugated Networks for Rescuing Stem Cell Fate

Constructing highly effective biocatalysts with controllable coordination geometry for eliminating reactive oxygen species (ROS) to address the current bottlenecks in stem-cell-based therapeutics remains challenging. Herein, inspired by the coordination structure of manganese-based antioxidase, we report a manganese-coordinated polyphthalocyanine-based biocatalyst (Mn-PcBC) with axial Mn-N5 sites and 2D d-π-conjugated networks that serves as an artificial antioxidase to rescue stem cell fate. Owing to the unique chemical and electronic structures, Mn-PcBC displays efficient, multifaceted, and robust ROS-scavenging activities, including elimination of H2 O2 and O2 ⋅- . Consequently, Mn-PcBC efficiently rescues the bioactivity and functionality of stem cells in high-ROS-level microenvironments by protecting the transcription of osteogenesis-related genes. This study offers essential insight into the crucial functions of axially coordinated Mn-N5 sites in ROS scavenging and suggests new strategies to create efficient artificial antioxidases for stem-cell therapies.

Clear-Box Machine Learning for Virtual Screening of 2D Nanozymes to Target Tumor Hydrogen Peroxide

Targeting tumor hydrogen peroxide (H₂ O₂ ) with catalytic materials has provided a novel chemotherapy strategy against solid tumors. Because numerous materials have been fabricated so far, there is an urgent need for an efficient in silico method, which can automatically screen out appropriate candidates from materials libraries for further therapeutic evaluation. In this work, adsorption-energy-based descriptors and criteria are developed for the catalase-like activities of materials surfaces. The result enables a comprehensive prediction of H₂ O₂ -targeted catalytic activities of materials by density functional theory (DFT) calculations. To expedite the prediction, machine learning models, which efficiently calculate the adsorption energies for 2D materials without DFT, are further developed. The finally obtained method takes advantage of both interpretability of physics model and high efficiency of machine learning. It provides an efficient approach for in silico screening of 2D materials toward tumor catalytic therapy, and it will greatly promote the development of catalytic nanomaterials for medical applications.

Catalase-Mimetic Artificial Biocatalysts with Ru Catalytic Centers for ROS Elimination and Stem-Cell Protection

Exploring high-efficiency reactive oxygen species (ROS)-elimination materials is of great importance for combating oxidative stress in diverse diseases, especially stem-cell-based biotherapeutics. By mimicking the FeN active centers of natural catalase, here, an innovative concept to design ROS-elimination artificial biocatalysts with Ru catalytic centers for stem-cell protection is reported. The experimental studies and theoretical calculations have systematically disclosed the activity merits and structure diversities of different Ru sites when serving as ROS-elimination artificial biocatalysts. Benefiting from the metallic electronic structures and synergetic effects of multiple sites, the artificial biocatalysts with Ru cluster centers present exceptional ROS-elimination activity; notably, it shows much higher catalytic efficiency per Ru atom on decomposing H₂ O₂ when compared to the isolated single-atom Ru sites, which is more efficient than that of the natural antioxidants and recently reported state-of-the-art ROS-scavenging biocatalysts. The systematic stem-cell protection studies reveal that the catalase-like artificial biocatalysts can provide efficient rescue ability for survival, adhesion, and differentiation functions of human mesenchymal stem cells in high ROS level conditions. It is suggested that applying these artificial biocatalysts with Ru cluster centers will offer a new pathway for engineering high-performance ROS-scavenging materials in stem-cell-based therapeutics and many other ROS-related diseases.

Characteristics and performance studies of a composite polymer electrolyte membrane based on chitosan/glycerol-sulfosuccinic acid modified montmorillonite clay

In this study, chitosan (CS) doped sulphosuccinic acid (SSA)-glycerol (Gly) and modified montmorillonite clay (MMT) were successfully fabricated. The membranes were prepared using the solution casting method. Analysis of morphology and topography using scanning electron microscopy (SEM) and atomic force microscopy (AFM) revealed that the composite membrane with 3 wt% MMT filler, namely CS/MMT-1, possessed the most adequate surface roughness compared to the other fabricated membranes. Furthermore, mechanical characterization of the CS/MMT-1 composite membrane showed that the membrane achieved satisfactory mechanical strength with a value of 39.23 MPa. Proton conductivity of the composite membranes increased as the temperature was increased. The proton conductivity of the CS/MMT-1 composite membrane increased from 1.75 × 10-2 S cm-1 at 25 °C up to 3.57 × 10-2 S cm-1 at 80 °C. The CS/MMT-1 composite membrane also exhibited a methanol permeability value that was significantly lower than that of pristine CS, namely 1.22 × 10-7 cm2 s-1 and 12.49 × 10-7 cm2 s-1, respectively. The results of this study show that the fabricated composite membrane can be used as an alternative polymer electrolyte membrane (PEM) for DMFC applications.

The physio-chemical properties and applications of 2D nanomaterials in agricultural and environmental sustainability

Global hunger and nutritional deficiency demand the advancement of existing and conventional approaches to food production. The application of nanoenabled strategies in agriculture has opened up new avenues for enhancing crop yield and productivity. Recently, two-dimensional (2D) nanomaterials (NMs) have manifested new possibilities for increasing food production and nutrition. Graphene nanosheets, the 2D form of graphene has been exemplary in enhancing the loading capacity of agro-active ingredients, their target-specific delivery, bioavailability, and controlled release with slow degradation, resulting in the increased shelf-life/active time of the agro-active components. Also, the development of novel formulations/composites of MXenes and Transition Metal Dichalcogenides (TMDs) can foster plant growth, metabolism, crop production, protection and improvement of soil quality. Additionally, the 2D NM-based biosensors can monitor the nutrient levels and other parameters affecting agronomical traits in plants. This review provides an insight into the details of 2D NM synthesis and functionalization methods. Notably, the review highlights the broad-range of 2D NM applications and their suitability in the development of nanotechnology-based agriformulations. The 2D NM-based derivatives have shown immense potential in enhancing the pedologic parameters, crop productivity, pest-protection and nutritional value. Thus, assisting in achieving food and environmental sustainability goals.

Interfacial interaction induced OER activity of MOF derived superhydrophilic Co3O4-NiO hybrid nanostructures

Electrocatalytic water splitting is one of the key technologies for future energy systems envisioned for the storage of energy obtained from variable renewables and green fuels. The development of efficient, durable, Earth-abundant and cheap electrocatalysts for the oxygen evolution reaction is a scorching area of research. The oxygen evolution reaction has huge potential for fuel cell and metal-air battery applications. Herein, we reported interfacially interacted and uniformly decorated Co₃O₄-NiO hybrid nanostructures formed by a metal-organic framework (Co₂-BDC(OH)₂) using BDC as a linker to the metal center. The fine nanosheets of Co₂-BDC(OH)₂ were first uniformly grown over the honeycomb-like structure of nickel foam (NF). After controlled calcination of these nanosheets/NF composites, a uniformly decorated, binder-free Co₃O₄-NiO/NF electrocatalyst was synthesized. The transformation of Co₂-BDC(OH)₂/NF into Co₃O₄-NiO/NF was characterized by several techniques such as powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy, transmission electron microscopy, etc. The catalyst exhibits a low overpotential of 311 mV vs. RHE at 10 mA cm^-2 current density. The catalyst also shows long-term stability (24 h) with a Tafel slope value of 90 mV dec^-1. The obtained experimental results are also in-line with the theoretical data acquired from model systems.

ROS-Scavenging Glyco-Nanoplatform for Synergistic Antibacteria and Wound-Healing Therapy of Bacterial Keratitis

Infectious keratitis is a serious disease originating from a corneal trauma infected with bacteria, which is intractable to heal due to stubborn infection and persistent inflammation featured with high reactive...

Rosmarinic Acid and Ulvan from Terrestrial and Marine Sources in Anti-Microbial Bionanosystems and Biomaterials

In order to increase their sustainability, antimicrobial renewable molecules are fundamental additions to consumer goods. Rosmarinic acid is extracted from several terrestrial plants and represents an effective anti-microbial agent. Ulvan, extracted from algae, is an anti-microbial polysaccharide. The present review is dedicated to discussing the sources and the extraction methodologies for obtaining rosmarinic acid and ulvan. Moreover, the preparation of bioanosystems, integrating the two molecules with organic or inorganic substrates, are reviewed as methodologies to increase their effectiveness and stability. Finally, the possibility of preparing functional biomaterials and anti-microbial final products is discussed, considering scientific literature. The performed analysis indicated that the production of both molecules is not yet performed with mature industrial technologies. Nevertheless, both molecules could potentially be used in the packaging, biomedical, pharmaceutical, cosmetic, sanitary and personal care sectors, despite some research being required for developing functional materials with specific properties to pave the way for many more applications.

Design of hybrid biocatalysts by controlled heteroaggregation of manganese oxide and sulfate latex particles to combat reactive oxygen species

The preparation of an antioxidant hybrid material by controlled heteroaggregation of manganese oxide nanoparticles (MnO2 NPs) and sulfate-functionalized polystyrene latex (SL) beads was accomplished. Negatively charged MnO2 NPs were prepared by precipitation and initially functionalized with poly(diallyldimethylammonium chloride) (PDADMAC) polyelectrolyte to induce charge reversal allowing decoration of oppositely charged SL surfaces via simple mixing. The PDADMAC-functionalized MnO2 NPs (PMn) aggregated with the SL particles leading to the formation of negatively charged, neutral and positively charged (SPMn) composites. The charge neutralization resulted in rapidly aggregating dispersions, while stable samples were observed once the composites possessed sufficiently high negative and positive charge, below and above the charge neutralization point, respectively. The antioxidant assays revealed that SL served as a suitable substrate and that the PDADMAC functionalization and immobilization of MnO2 NPs did not compromise their catalase (CAT) and superoxide dismutase (SOD)-like activities, which were also maintained within a wide temperature range. The obtained SPMn composite is expected to be an excellent candidate as an antioxidant material for the efficient scavenging of reactive oxygen species at both laboratory and larger scales, even under harsh conditions, where natural antioxidants do not function.

Characterization, antioxidant activity, and biocompatibility of selenium nanoparticle-loaded thermosensitive chitosan hydrogels

In this study, we recruited chitosan (CS) both for selenium nanoparticles (SeNPs) synthesis and for the development of a thermoresponsive nanocomposite hydrogel with the addition of glycerol phosphate (GP). Considering that SeNPs are toxic at high concentrations, five different ingredients of the nanocomposite hydrogel system with low concentrations of SeNPs (1.25-20 μg/mL) were prepared. The gelation conditions, structural characteristics, and mechanical properties of SeNPs-loaded thermosensitive CS/GP hydrogels were investigated. We also evaluated their antioxidizing activities and biocompatibility of the CS/GP/SeNPs hydrogels. Our study demonstrated that the incorporation of SeNPs in the hydrogel improved its mechanical properties, antioxidant activity, and degree of swelling. According to the properties of SeNPs and CS/GP thermosensitive hydrogels, the combination of these two technologies in an appropriate manner would be a promising antioxidant system for drug delivery and tissue engineering.

Catalytic antioxidant nanocomposites based on sequential adsorption of redox active metal complexes and polyelectrolytes on nanoclay particles

An antioxidant nanocomposite was prepared by successive adsorption of redox active metal complexes (copper(ii)-bipyridyl and iron(iii)-citrate) and polyelectrolytes (poly(styrene sulfonate) and poly(diallyldimethyl ammonium)) on layered double hydroxide nanoclay. The experimental conditions were optimized in each preparation step and thus, the final composite formed highly stable colloids, i.e., excellent resistance against salt-induced aggregation was achieved. Due to the synergistic effect of the metal complexes, the developed composite showed remarkable activity in the dismutation of superoxide radicals, close to the one determined for the native superoxide dismutase enzyme. The obtained composite is highly selective for superoxide radical dismutation, while its activity in other antioxidant tests was close to negligible. Structural characterization of the composite revealed that the excellent superoxide radical scavenging ability originated from the advantageous coordination geometry around the copper(ii) center formed upon immobilization. The structure formed around the metal centers led to optimal redox features and consequently, to an improved superoxide dismutase-like activity. The catalytic antioxidant composite is a promising candidate to reduce oxidative stress in industrial manufacturing processes, where natural enzymes quickly lose their activity due to the harsh environmental conditions.

Layered double hydroxide-based antioxidant dispersions with high colloidal and functional stability

Highly stable antioxidant dispersions were designed on the basis of ring-opened ellagic acid (EA) intercalated into MgAl-layered double hydroxide (LDH) nanoparticles. The morphology of the composite was delicately modified with ethanolic washing to obtain EtOH-EA-LDH with a high specific surface area. The colloidal stability was optimized by surface functionalization with positively charged polyelectrolytes. Polyethyleneimine (PEI), protamine sulfate (PS) and poly(acrylamide-co-diallyl dimethyl ammonium chloride) (PAAm-co-DADMAC) was adsorbed onto the surface of the oppositely charged EtOH-EA-LDH leading to charge neutralization and overcharging at appropriate doses. Formation of adsorbed polyelectrolyte layers provided remarkable colloidal stability for the EtOH-EA-LDH. Modification with PEI and PAAm-co-DADMAC outstandingly improved the resistance of the particles against salt-induced aggregation with a critical coagulation concentration value above 1 M, while only limited stability was achieved by covering the nanoparticles with PS. The high antioxidant activity of EtOH-EA-LDH was greatly preserved upon polyelectrolyte coating, which was proved in the scavenging of radicals in the test reaction applied. Hence, an active antioxidant nanocomposite of high drug dose and remarkable colloidal stability was obtained to combat oxidative stress in systems of high electrolyte concentrations.

Recent advances in ultrathin two-dimensional materials and biomedical applications for reactive oxygen species generation and scavenging

Graphene and graphene-like two-dimensional (2D) nanomaterials, such as black phosphorus (BP), transition metal carbides/carbonitrides (MXene) and transition metal dichalcogenides (TMD), have been extensively studied in recent years due to their unique physical and chemical properties. With atomic-scale thickness, these 2D materials and their derivatives can react with ROS and even scavenge ROS in the dark. With excellent biocompatibility and biosafety, they show great application potential in the antioxidant field and ROS detection for diagnosis. They can also generate ROS under light and be applied in antibacterial, photodynamic therapy (PDT), and other biomedical fields. Understanding the degradation mechanism of 2D nanomaterials by ROS generated under ambient conditions is crucial to developing air stable devices and expanding their application ranges. In this review, we summarize recent advances in 2D materials with a focus on the relationship between their intrinsic structure and the ROS scavenging or generating ability. We have also highlighted important guidelines for the design and synthesis of highly efficient ROS scavenging or generating 2D materials along with their biomedical applications.

Hierarchically Porous S/N Codoped Carbon Nanozymes with Enhanced Peroxidase-like Activity for Total Antioxidant Capacity Biosensing

Design of highly active carbon nanozymes and further establishment of ultrasensitive biosensors remain a challenge. Herein, hierarchically porous carbon nanozymes with sulfur (S)/nitrogen (N) codoping (SNC) were developed. Compared with N-doped carbon (NC) nanozymes, SNC nanozymes have a smaller Michaelis-Menten constant and higher specific activities, demonstrating that the S-doping in SNC nanozymes could not only enhance their affinity toward substrates but also improve their catalytic performance. These results may be caused by the synergistic effect of heteroatoms (S and N). Because of the good enzyme-like activity, the proposed SNC nanozymes were exploited to the colorimetric detection of the total antioxidant capacity (TAC) using ascorbic acid as a typical model with a limit of detection of 0.08 mM. Because of its high sensitivity and selectivity and encouraging performance, the detection method presented practical feasibility for the TAC assay in commercial beverages. This work paves a way to design the highly active carbon nanozymes and expand their applications in the construction of high-performance biosensors.

Recent advances in graphene monolayers growth and their biological applications: A review

Development of two-dimensional high-quality graphene monolayers has recently received great concern owing to their enormous applications in diverging fields including electronics, photonics, composite materials, paints and coatings, energy harvesting and storage, sensors and metrology, and biotechnology. As a result, various groups have successfully developed graphene layers on different substrates by using the chemical vapor deposition method and explored their physical properties. In this direction, we have focused on the state-of-the-art developments in the growth of graphene layers, and their functional applications in biotechnology. The review starts with the introduction, which contains outlines about the graphene and their basic characteristics. A brief history and inherent applications of graphene layers followed by recent developments in growth and properties are described. Then, the application of graphene layers in biodevices is reviewed. Finally, the review is summarized with perspectives and future challenges along with the scope for future technological applications.

A Comparative Study on the Oxidation of Label-Free Silver Triangular Nanoplates by Peroxides: Main Effects and Sensing Applications

Nowadays, analytical systems based on silver triangular nanoplates (AgTNPs) have been shown as good prospects for chemical sensing. However, they still remain relatively poorly studied as colorimetric probes for sensing various classes of compounds. This study shows that these nanoparticles are capable of being oxidized by peroxides, including both hydrogen peroxide and its organic derivatives. The oxidation was found to result in a decrease in the AgTNPs' local surface plasmon resonance band intensity at 620 nm. This was proposed for peroxide-sensitive spectrophotometric determination. Five peroxides differing in their structure and number of functional groups were tested. Three of them easily oxidized AgTNPs. The effects of a structure of analytes and main exterior factors on the oxidation are discussed. The detection limits of peroxides in the selected conditions increased in the series peracetic acid < hydrogen peroxide < tert-butyl hydroperoxide, coming to 0.08, 1.6 and 24 μmol L^-1, respectively. tert-Butyl peroxybenzoate and di-tert-butyl peroxide were found to have no effect on the spectral characteristics of AgTNPs. By the example of hydrogen peroxide, it was found that the determination does not interfere with 100-4000-fold quantities of common inorganic ions. The proposed approach was successfully applied to the analysis of drugs, cosmetics and model mixtures.

Curcumin Incorporation into Zn3Al Layered Double Hydroxides—Preparation, Characterization and Curcumin Release

Curcumin (CR) is a natural antioxidant compound extracted from Curcuma longa (turmeric). Until now, researches related to the incorporation of CR into layered double hydroxides (LDHs) were focused only on hybrid structures based on a MgxAl-LDH matrix. Our studies were extended towards the incorporation of CR in another type of LDH-matrix (Zn3Al-LDH) which could have an even more prolific effect on the antioxidant activity due to the presence of Zn. Four CR-modified Zn3Al-LDH solids were synthesized, e.g., PZn3Al-CR(Aq), PZn3Al-CR(Et), RZn3Al-CR(Aq) and RZn3Al-CR(Et) (molar ratio CR/Al = 1/10, where P and R stand for the preparation method (P = precipitation, R = reconstruction), while (Aq) and (Et) indicate the type of CR solution, aqueous or ethanolic, respectively). The samples were characterized by XRD, Attenuated Total Reflectance Fourier Transformed IR (ATR-FTIR) and diffuse reflectance (DR)-UV–Vis techniques and the CR-release was investigated in buffer solutions at different pH values (1, 2, 5, 7 and 8). XRD results indicated a layered structure for PZn3Al-CR(Aq), PZn3Al-CR(Et), RZn3Al-CR(Aq) impurified with ZnO, while RZn3Al-CR(Et) contained ZnO nano-particles as the main crystalline phase. For all samples, CR-release revealed a decreasing tendency towards the pH increase, and higher values were obtained for RZn3Al-CR(Et) and PZn3Al-CR(Et) (e.g., 45% and 25%, respectively at pH 1).