Simple Synthesis of NdFeO3 Nanoparticles By the Co-Precipitation Method Based on a Study of Thermal Behaviors of Fe (III) and Nd (III) Hydroxides

Photocatalytic removal of some selected antibiotics in polluted water system by graphitic carbon nitride-enhanced vanadium ferrite (VFe2O4@g-C3N4)

Antibiotics such as sulfamethoxazole (SUF), ciprofloxacin (CIP) and erythromycin (ERY) are frequently detected in water systems without being efficiently removed during water treatment. This study synthesized a graphitic carbon nitride-enhanced vanadium ferrite (VFe2O4@g-C3N4) as a photocatalyst for degrading SUF, CIP and ERY in an aqueous solution. VFe2O4@g-C3N4 was characterized with X-ray diffractometry (XRD), thermogravimetry analysis (TGA), ultraviolet (UV)-visible spectrophotometry, scanning electron microscope (SEM) and transmission electron microscope (TEM). The XRD characterization of VFe2O4@g-C3N4 revealed diffraction patterns with a crystallite size of 22.45 nm and a bandgap energy of 1.94 eV. The SEM image revealed the surface to be rough with irregular particle shape and size. The TEM image showed an average particle size of 92.47 nm. VFe2O4@g-C3N4 exhibited a degradation efficiency, which showed complete removal of SUF (100 %) from solution while the efficiency towards CIP is 94 ± 0.60 % and 90 ± 0.8 % towards ERY. The best photocatalytic performance was achieved with 0.12 g L-1 of VFe2O4@g-C3N4 and pH = 7.0 as the optimal conditions for achieving complete removal of SUF, CIP and ERY at a concentration lower than 10.00 mg L-1 under visible-light irradiation. The photodegradation of SUF, CIP and ERY by VFe2O4@g-C3N4 was found to be promoted by ROS with ˙OH and SO4˙- radicals playing a significant role. VFe2O4@g-C3N4 demonstrated a regeneration capacity that is above 90 % at the 10th cycle of regeneration treatment, suggesting it to be stable and reusable with the X-ray diffraction pattern remaining unchanged and no leaching of VFe2O4@g-C3N4 into solution. The result from the study reveals VFe2O4@g-C3N4 as a promising photocatalyst for removing antibiotics from an aqueous solution.

Effect of ball milling time on Sr0.7Sm0.3Fe0.4Co0.6O2.65 perovskites and their application as semiconductor layers in dye-sensitized solar cells

The practical utilization of TiO2 as a semiconductor in dye-sensitized solar cells (DSSCs) has been set back by poor visible light absorption, high charge carrier recombination, and low electrical conductivity, which reduce the power conversion efficiency (PCE) and sustainability of the device. In this respect, perovskites with excellent properties, such as large surface area, good optical properties, high electrical conductivity, and superior electrochemical stability, have recently emerged as promising alternatives capable of overcoming the drawbacks of TiO2. Herein, Sr0.7Sm0.3Fe0.4Co0.6O2.65 (SSFC) perovskites were prepared via the ball milling method at various milling times of 0, 5, and 10 h, and the obtained samples were denoted by SSFC-0, SSCF-5, and SSCF-10, respectively. Increasing the ball milling time led to a significant reduction in nanoparticle size and agglomeration, which, in turn, increased the surface area and electrical conductivity of the samples. As a consequence, the SSFC-10 perovskite exhibited the smallest average particle sizes (18.9 nm) with the largest surface area (61.8 m2 g-1) and minimum defects, which allowed for efficient electron transport, resulting in the best electrical conductivity of 49.8 S cm-1. Ultimately, DSSCs fabricated using SSFC-10 semiconductor layers achieved an optimum PCE of 6.01 %, which is an improvement of 8.67 %, 1.1 %, and 6.56 % for SSFC-0 (3.69 %), SSFC-5 (4.96 %), and TiO2 (5.64 %), respectively. Thus, varying the ball milling time can be used as an effective technique to tailor the physicochemical properties of SSFC to suit desired applications, particularly the fabrication of highly efficient and sustainable DSSC semiconductor layers.

One-Dimensional La0.2Sr0.8Cu0.4Co0.6O3-δ Nanostructures for Efficient Oxygen Evolution Reaction

Producing oxygen and hydrogen via the electrolysis of water has the advantages of a simple operation, high efficiency, and environmental friendliness, making it the most promising hydrogen production method. In this study, La0.2Sr0.8Cu0.4Co0.6O3-δ (LSCC) nanofibers were prepared by electrospinning to utilize non-noble perovskite oxides instead of noble metal catalysts for the oxygen evolution reaction, and the performance and electrochemical properties of LSCC nanofibers synthesized at different firing temperatures were evaluated. In an alkaline environment (pH = 14, 6 M KOH), the nanofibers calcined at 650 °C showed an overpotential of 209 mV at a current density of 10 mA cm-2 as well as good long-term stability. Therefore, the prepared LSCC-650 NF catalyst shows excellent potential for electrocatalytic oxygen evolution.

Synthesis of neodymium ferrite incorporated graphitic carbonitride (NdFe2O4@g-C3N4) and its application in the photodegradation of ciprofloxacin and ampicillin in a water system

Purification of antibiotic-contaminated drinking water sources is faced with limitations. Therefore, this study incorporated neodymium ferrite (NdFe2O4) in graphitic carbonitride (g-C3N4) to form NdFe2O4@g-C3N4 as a photocatalyst for removing ciprofloxacin (CIP) and ampicillin (AMP) from aqueous systems. X-ray diffraction (XRD) revealed a crystallite size of 25.15 nm for NdFe2O4 and 28.49 nm for NdFe2O4@g-C3N4. The bandgap is 2.10 and 1.98 eV for NdFe2O4 and NdFe2O4@g-C3N4, respectively. The transmission electron micrograph (TEM) images of NdFe2O4 and NdFe2O4@g-C3N4 gave an average particle size of 14.10 nm and 18.23 nm, respectively. Scanning electron micrograph (SEM) images showed heterogeneous surfaces with irregular-sized particles suggesting agglomeration at the surfaces. NdFe2O4@g-C3N4 (100.00 ± 0.00% for CIP and 96.80 ± 0.80% for AMP) exhibited better photodegradation efficiency towards CIP and AMP than NdFe2O4 (78.45 ± 0.80% for CIP and 68.25 ± 0.60% for AMP) in a process described by pseudo-first-order kinetics. NdFe2O4@g-C3N4 showed a stable regeneration capacity towards degradation of CIP and AMP with a capacity that is above 95% even at the 15th cycle of treatment. The use of NdFe2O4@g-C3N4 in this study revealed its potential as a promising photocatalyst for removing CIP and AMP in water systems.

Potential effects of nano-cellulose and nano-silica/polyvinyl alcohol nanocomposites in the strengthening of dyed paper manuscripts with madder: an experimental study

In the present work, the composite cross-linked were used to consolidate the dyed paper manuscripts. Nanocomposites of mesoporous silica nanoparticle (MPSNP)/polyvinyl alcohol (PVA) and cellulose nanofiber (CNF)/PVA, which have never been used before, have been evaluated for the consolidation process of the dyed paper manuscripts with madder extract. Three concentrations 1%, 3%, and 5% have been prepared. Analysis and investigation methods like scanning electron microscope (SEM), transmission electron microscope (TEM), dynamic light scattering analysis (DLS), X-Ray diffraction Analysis (XRD), atomic force microscope (AFM), Fourier transform infrared spectroscopy (FTIR) and total color difference (ΔE) by spectrophotometer have been used in order to characterize the prepared nano-sized composites and evaluate the treated dyed paper samples before and after the aging process. The results of surface morphology by SEM revealed the effectiveness of MPSNP/PVA core-shell nanocomposite at 5% in the consolidation process, where the improvement of properties of the aged dyed paper samples. The fibers of the treated paper became strong and appeared clearly. The result of ΔE measurements showed that the treated sample with MPSNP/PVA nanocomposite at 5% gave the lowest ΔE (5.22), while, the treated sample with CNF/PVA nanocomposite at 5% gave the highest ΔE value (11.66). Mechanical measurements (tensile strength and elongation) revealed the efficiency of MPSNP/PVA nanocomposite at 5% in the treatment of the aged dyed paper samples. The treated sample with the mentioned material gave tensile strength and elongation values of 84.8 N/nm² and 1.736%, respectively. In contrast, the treated sample with CNF/PVA nanocomposite at 1% gave the lowest tensile strength and elongation values 38.2 N/nm², and 1.166%, respectively. FTIR analysis revealed an increase was noticed in the CH₂ stretching band (refers to the crystallinity of cellulose), where the intensity of the treated sample with MPSNP/PVA nanocomposite was at a 5% increase compared to the control sample. The FTIR results supported the results of mechanical measurements. The intensity of the CH₂ stretching band, which refers to the crystallinity index of cellulose, was increased with the use of MPSNP/PVA nanocomposite at 3% and 5%, which explains the improvement in mechanical properties. This may be due to the nano-mineral particles, which improve the mechanical properties. Additionally, they reduce the effect of accelerated thermal aging on the cellulosic fibers and give them stability. The detailed analysis of analytical methods used for evaluation revealed the novelty of MPSNP/PVA nanocomposite, especially at 5%. It has a potential role in strengthening and improving different properties of the dyed paper manuscripts with madder extract.

Co-Doped NdFeO3 Nanoparticles: Synthesis, Optical, and Magnetic Properties Study

In this work, single-phase nanostructured NdFe_1-xCo_xO₃ (x = 0, 0.1, 0.2, and 0.3) perovskite materials were obtained by annealing stoichiochemistry mixtures of their component hydroxides at 750 °C for 60 min. The partial substitution of Fe by Co in the NdFeO₃ crystal lattice leads to significant changes in the structural characteristics, and as a consequence, also alters both the magnetic and optical properties of the resulting perovskites. The low optical band gap (E_g = 2.06 ÷ 1.46 eV) and high coercivity (H_c = 136.76 ÷ 416.06 Oe) give Co-doped NdFeO₃ nanoparticles a huge advantage for application in both photocatalysis and hard magnetic devices.

The synthesis of novel heterojunction h-YbFeO3/o-YbFeO3 photocatalyst with enhanced Fenton-like activity under visible-light

A simple solution combustion approach followed by heat treatment was used to successfully synthesize a novel h-YbFeO₃/o-YbFeO₃ nanocrystalline heterojunction with an enhanced photo-Fenton-like activity in the decolorization process of methyl violet.