Raman Spectra of Diphenylalanine Microtubes: Polarisation and Temperature Effects

pH-sensitive release of nitric oxide gas using peptide-graphene co-assembled hybrid nanosheets

Nitric oxide (NO) donating drugs such as organic nitrates have been used to treat cardiovascular diseases for more than a century. These donors primarily produce NO systemically. It is however sometimes desirable to control the amount, location, and time of NO delivery. We present the design of a novel pH-sensitive NO release system that is achieved by the synthesis of dipeptide diphenylalanine (FF) and graphene oxide (GO) co-assembled hybrid nanosheets (termed as FF@GO) through weak molecular interactions. These hybrid nanosheets were characterised by using X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, zeta potential measurements, X-ray photoelectron spectroscopy, scanning and transmission electron microscopies. The weak molecular interactions, which include electrostatic, hydrogen bonding and π-π stacking, are pH sensitive due to the presence of carboxylic acid and amine functionalities on GO and the dipeptide building blocks. Herein, we demonstrate that this formulation can be loaded with NO gas with the dipeptide acting as an arresting agent to inhibit NO burst release at neutral pH; however, at acidic pH it is capable of releasing NO at the rate of up to 0.6 μM per minute, comparable to the amount of NO produced by healthy endothelium. In conclusion, the innovative conjugation of dipeptide with graphene can store and release NO gas under physiologically relevant concentrations in a pH-responsive manner. pH responsive NO-releasing organic-inorganic nanohybrids may prove useful for the treatment of cardiovascular diseases and other pathologies.

Piezoactive Bioorganic Diphenylalanine Films: Mechanism of Phase Formation

Self-organized peptides are unique materials with various applications in biology, medicine, and nanotechnology. Many of these applications require fabrication of homogeneous thin films having high piezoelectric effect and sufficiently low roughness. Recently, a facile method for the controlled deposition of flat solid films of the most studied peptide, diphenylalanine (FF), has been proposed, which is based on the crystallization of FF in the amorphous phase under the action of water vapor. This method is very advantageous compared with crystallization from a liquid phase reported previously. Here, we thoroughly investigate the mechanism of solid-state transformation from the amorphous to crystalline phase. The study revealed that the process proceeds in two distinct stages, maintaining clamped condition of self-assembling building blocks that preserve the films' morphology and high piezoelectric activity. We emphasize the critical role of water diffusion that governs two-dimensional growth of crystalline domains in FF films, merging in very dense, flat, and homogeneous films. These findings open a wide perspective for using this methodology for the direct fabrication of biofilms from the amorphous phase. We thus expect the application of these films to various nanotechnological applications of self-assembled structures.

Solvent-dependent formation kinetics of L,L-diphenylalanine micro/nanotubes

Investigating the molecular mechanism underlying the aggregation process of amyloid fibers is of great importance both for its implications in several degenerative diseases and for the design of new materials based on self-assembly. In particular, micro/nanotubes of L,L-diphenylalanine have been investigated as a model of amyloid plaques in Alzheimer's disease and also for their broad range of physical properties, e.g., good thermo- and mechanical stability, semiconductivity, piezoelectricity and optical properties. It has been reported that the assembly/disassembly dynamics of L,L-diphenylalanine crystals is influenced by the solvent composition being triggered by evaporation of solvents. In fact the solvatomorphism of this peptide-based nanomaterial is complex and rich attracting great attention. Here we investigated the growing kinetics of the micro/nanotubes of L,L-diphenylalanine in samples prepared with toluene, ethanol, and acetic acid solvents by time-resolved Raman spectroscopy. Our results indicated that the self-assembly in this case competes with the water evaporation process contrary to what is reported by samples prepared with widely used solvent 1,1,1,3,3,3-hexafluoro-2-propanol. We note that exclusively tubular structures (being hollow for the toluene solvent case) were observed. Interestingly our results support the fact that for acetic acid, ethanol, and toluene the micro/nanotube formation process is autocatalytic instead of being nucleation-dominating as reported for samples prepared using solvent 1,1,1,3,3,3-hexafluoro-2-propanol.

Spectrally combined four-diode-pumped femtosecond Ti:sapphire laser with 16.3 nJ pulse and its application to video-rate coherent anti-Stokes Raman scattering spectro-microscopy

We demonstrate the generation of high-energy femtosecond pulses by a spectrally combined four-diode-pumped Ti:sapphire laser with semi-conductor saturable absorber mirror mode locking. To achieve energy scaling, the laser cavity was extended using a design based on the Herriott multipass cell. The laser operates at a 17.5 MHz repetition rate and generates pulses with energies as high as 16.3 nJ and 80 fs in duration. The signal-to-noise ratio at the fundamental frequency showed an extinction ratio of >50 dB relative to the carrier. This compact single laser was applied to video-rate forward and backward coherent anti-Stokes Raman scattering spectro-microscopy with a pixel dwell time of 122 ns, which is the lowest dwell time ever achieved, to the best of our knowledge.

Three-Dimensional Printing of Dipeptides with Spatioselective Programming of Crystallinity for Multilevel Anticounterfeiting

The functionalities of peptide microstructures and nanostructures can be enhanced by controlling their crystallinity. Gaining control over the crystallinity within the desired structure, however, remains a challenge. We have developed a three-dimensional (3D) printing method that enables spatioselective programming of the crystallinity of diphenylalanine (FF) dipeptide microarchitectures. A femtoliter ink meniscus is used to spatially control reprecipitation self-assembly, enabling the printing of a freestanding FF microstructure with programmed shape and crystallinity. The self-assembly crystallization of FF can be switched on and off at will by controlling the evaporation of the binary solvent. The evaporation-dependent crystallization was theoretically studied by the numerical simulation of supersaturation fields in the meniscus. We found that a 3D-printed FF microarchitecture with spatially programmed crystallinity can carry a 3D digital optical anisotropy pattern, applicable to generating polarization-encoded anticounterfeiting labels. This crystallinity-controlled additive manufacturing will pave the new way for facilitating the creation of peptide-based devices.

Structural Transition-Induced Raman Enhancement in Bioinspired Diphenylalanine Peptide Nanotubes

Semiconducting materials are increasingly proposed as alternatives to noble metal nanomaterials to enhance Raman scattering. We demonstrate that bioinspired semiconducting diphenylalanine peptide nanotubes annealed through a reported structural transition can support Raman detection of 10^-7 M concentrations for a range of molecules including mononucleotides. The enhancement is attributed to the introduction of electronic states below the conduction band that facilitate charge transfer to the analyte molecule. These results show that organic semiconductor-based materials can serve as platforms for enhanced Raman scattering for chemical sensing. As the sensor is metal-free, the enhancement is achieved without the introduction of electromagnetic surface-enhanced Raman spectroscopy.

Three-Dimensional Printing of Self-Assembled Dipeptides

Peptide-based materials are emerging as smart building blocks for nanobiodevices due to the programmability of their properties via the molecular constituents or arrangements. Many clever molecular self-assembly approaches have been devised to produce peptide crystalline structures. However, their freeform shaping remains a challenge due to the intrinsic self-assembly nature. Here, we report the fabrication of freeform, crystalline diphenylalanine (FF) peptide structures by combining meniscus-guided 3D printing with molecular self-assembly. Self-assembly in 3D-printed FF arises from mild thermal activation under precise temperature control of the build platform. After thorough characterizations, we demonstrate layer-by-layer, crystalline 3D printing with a high spatial resolution of 2 μm laterally and 200 nm vertically. The 3D-printed FF exhibits piezoelectricity originating from its crystalline character, showing the potential to become a key constituent for bioelectronic devices. We expect this technique to open up the possibility to create functional devices based on self-assembled organic materials without design restrictions.

Morphology, energetics and growth kinetics of diphenylalanine fibres

Diphenylalanine (FF) has been shown to self-assemble from water into heterogeneous fibres that are among the stiffest biomaterials known. How and why the fibres form has, however, not been clear. In this work, the nucleation and growth of FF fibres was investigated in a combined experimental and theoretical study. Scanning electron microscopy and optical microscopy showed FF fibre morphology to be hollow tubes of varying widths with occasional endcaps. Molecular dynamics simulations of FF nanostructures based on the bulk crystalline geometry demonstrated that axial growth stablilises the fibres and that structures with different widths show similar stabilities, in accord with the wide range of fibre widths observed experimentally. Linear dichroism (LD) spectroscopy was used to determine the thermal stability of the fibres, showing that FF solutions are fully monomeric at 70 °C and that fibres begin to form at ∼40 °C upon cooling. The LD kinetic studies indicated a nucleation-driven assembly with subsequent fibre growth, but a secondary nucleation process is required to explain the data.