Crystal Structure, Vibrational, Spectroscopic and Thermochemical Properties of Double Sulfate Crystalline Hydrate [CsEu(H2O)3(SO4)2]·H2O and Its Thermal Dehydration Product CsEu(SO4)2

Sr2HgGe2OS6: A Hg-Based Oxychalcogenide Infrared Nonlinear Optical Material Exhibiting Favorable Balance between a Large Band Gap and Strong Second Harmonic Generation Response

Currently, oxychalcogenides with mixed-anion groups that integrate the property advantages of oxides (wide optical band gap) and chalcogenides [strong second harmonic generation (SHG) response] through chemical substitution engineering have attracted widespread interest and are considered to be important candidates for infrared (IR) nonlinear optical (NLO) materials. Herein, the first Hg-based oxychalcogenide Sr2HgGe2OS6 with mixed anion [GeOS3] units has been successfully synthesized through a spontaneous crystallization method, which exhibits a favorable balance between the strong SHG response (0.7 × AgGaS2) and large optical band gap (2.9 eV). In addition, Sr2HgGe2OS6 shows high laser-induced damage threshold (LIDT, 2.1 × AgGaS2) as well as phase-matching (PM) performance. Theoretical calculations indicate that the Sr2HgGe2OS6 encompasses large birefringence of 0.128@2090 nm (3.3 × AgGaS2) and its SHG density mainly comes from [HgS4] tetrahedra and [GeOS3] units. This work not only demonstrates that Sr2HgGe2OS6 is a promising IR NLO material but also provides new ideas for the exploration of Hg-based oxychalcogenide IR NLO materials.

Thermal Stability and Non-Linear Optical and Dielectric Properties of Lead-Free K0.5Bi0.5TiO3 Ceramics

Lead-free K0.5Bi0.5TiO3 (KBT) ceramics with high density (~5.36 g/cm3, 90% of X-ray density) and compositional purity (up to 90%) were synthesized using a solid-state reaction method. Strongly condensed KBT ceramics revealed homogenous local microstructures. TG/DSC (Thermogravimetry-differential scanning calorimetry) techniques characterized the thermal and structural stability of KBT. High mass stability (>0.4%) has proven no KBT thermal decomposition or other phase precipitation up to 1000 °C except for the co-existing K2Ti6O13 impurity. A strong influence of crystallites size and sintering conditions on improved dielectric and non-linear optical properties was reported. A significant increase (more than twice) in dielectric permittivity (εR), substantial for potential applications, was found in the KBT-24h specimen with extensive milling time. Moreover, it was observed that the second harmonic generation (λSHG = 532 nm) was activated at remarkably low fundamental beam intensity. Finally, spectroscopic experiments (Fourier transform Raman and far-infrared spectroscopy (FT-IR)) were supported by DFT (Density functional theory) calculations with a 2 × 2 × 2 supercell (P42mc symmetry and C4v point group). Moreover, the energy band gap was calculated (Eg = 2.46 eV), and a strong hybridization of the O-2p and Ti-3d orbitals at Eg explained the nature of band-gap transition (Γ → Γ).

Triboluminescence and crystal structure of the complex [Eu(MBA)3 Dipy]2 (HMBA)

The atomic structure of the crystals [Eu(MBA)3 Dipy]2 (HMBA) (MBA-аnion toluic acid, Dipy-2,2'-dipyridyl, HMBA-toluic acid), displaying intensive luminescence and triboluminescence was determined using single crystal X-ray diffraction analysis. The triclinic centrosymmetric crystals have the following parameters: a = 10.620(2), b = 11.849(2), c = 14.9868(2) Å, α = 68.297(1), β = 76.172(1), γ = 80.378(1)°, sp.gr. P - 1, Z = 1, ρcalc.  = 1.537 g/cm3 . The structure belongs to the insular type and is presented as the isolated complex Eu2 -dimeric formations and outer-sphere HMBA. The structural aspects of the observed luminescence and triboluminescence properties of the compound were discussed, and the cleavage plane role in the process of the crystal destruction was revealed.

Control of physical properties in BiFeO3nanoparticles via Sm3+and Co2+ion doping

Highly crystalline BiFeO3(BFO), Bi0.97Sm0.03FeO3(Sm-BFO) and BiFe0.97Co0.03O3(Co-BFO) nanoparticles (NPs) were utilized as potential magnetic hyperthermia agents at two different frequencies in the radiofrequency (RF) range, and the effect of Sm3+and Co2+ion doping on the physical properties of the material was examined. The thermal behaviour of the as-prepared powders disclosed that the crystallization temperature of the powders is affected by the incorporation of the dopants into the BFO lattice and the Curie transition temperature is decreased upon doping. Vibrational analysis confirmed the formation of the R3c phase in all compounds through the characteristic FT-IR absorbance bands assigned to O-Fe-O bending vibration and Fe-O stretching of the octahedral FeO6group in the perovskite, as well as through Raman spectroscopy. The shift of the Raman-active phonon modes in Sm-BFO and Co-BFO NPs indicated structural distortion of the BFO lattice, which resulted in increased local polarization and enhanced visible light absorption. The aqueous dispersion of Co-BFO NPs showed the highest magnetic hyperthermia performance at 30 mT/765 kHz, entering the therapeutic temperature window for cancer treatment, whereas the heating efficiency of all samples was increased with increasing frequency from 375 to 765 kHz, making our doped nanoparticles to be suitable candidates for potential biomedical applications.

High-Efficiency Narrow-Band Green-Emitting Manganese(II) Halide for Multifunctional Applications

Zero-dimensional (0D) Mn2+-based metal halides used as luminescent materials and scintillators have become a research hotspot in the field of photoelectric materials and devices due to their unique composition, structure, and fluorescence properties. It is of great value to explore new Mn2+-based metal halides to achieve multifunctional applications. Herein, the novel 0D Mn2+-based metal halide single crystal (BPTP)2MnBr4 is synthesized by a simple solvent-antisolvent recrystallization method. Under excitation at 468 nm, the (BPTP)2MnBr4 single crystal shows a pronounced narrow-band green luminescence centered at 515 nm derived from the d-d transition of the Mn2+ ion. This emission has a relatively narrow full width at half maximum of 43 nm and a high photoluminescence quantum yield (PLQY) of 82%. In addition, (BPTP)2MnBr4 exhibits good thermal stability at 393 K with a retention of 79% of the initial photoluminescence intensity at 298 K. Benefiting from its strong blue light excitation, high PLQY, and good thermal stability, we manufacture an ideal white light-emitting diode (LED) device using a 460 nm blue LED chip, green-emitting (BPTP)2MnBr4, and commercial K2SiF6:Mn4+ red phosphor. Under 20 mA drive current, the LED shows a high luminous efficiency of 112 lm/W and a wide color gamut of 110.8%, according to the National Television System Committee standard. In addition, (BPTP)2MnBr4 crystals show a strong X-ray absorption. Based on the commercial Lu3Al5O12:Ce3+ scintillator, the calculated light yield of (BPTP)2MnBr4 reaches up to about 136,000 photons/MeV and the detection limit reaches 0.282 μGyair s-1. Additionally, a melt quenching approach is used to construct a (BPTP)2MnBr4 clear glass scintillation screen, realizing a spatial resolution of 10.1 lp/mm. The proper performances of (BPTP)2MnBr4 as phosphor-converted LED materials and the X-ray scintillator with the addition of eco-friendly, low-cost solution processability make 0D Mn2+-based metal halides potential luminescent materials for multifunctional applications.

Negative Thermal Expansion in the Polymorphic Modification of Double Sulfate β-AEu(SO4)2 (A-Rb+, Cs+)

New polymorphic modifications of double sulfates β-AEu(SO₄)₂ (A-Rb⁺, Cs⁺) were obtained by the hydrothermal method, the structure of which differs significantly from the monoclinic modifications obtained earlier by solid-state methods. According to single-crystal diffraction data, it was found that the compounds crystallize in the orthorhombic system, space group Pnna, with parameters β-RbEu(SO₄)₂: a = 9.4667(4) Å, b = 13.0786(5) Å, c = 5.3760(2) Å, V = 665.61(5) ų; β-CsEu(SO4)2: a = 9.5278(5) Å, b = 13.8385(7) Å, c = 5.3783(3) Å, V = 709.13(7) ų. The asymmetric part of the unit cell contains one-half Rb⁺/Cs⁺ ion, one-half Eu³⁺ ion, both in special sites, and one SO₄^2- ion. Both compounds exhibit nonlinear negative thermal expansion. According to the X-ray structural analysis and theoretical calculations, the polarizing effect of the alkali metal ion has a decisive influence on the demonstration of this phenomenon. Experimental indirect band gaps of β-Rb and β-Cs are 4.05 and 4.11 eV, respectively, while the direct band gaps are 4.48 and 4.54 eV, respectively. The best agreement with theoretical calculations is obtained using the ABINIT package employing PAW pseudopotentials with hybrid PBE0 functional, while norm-conserving pseudopotentials used in the frame of CASTEP code and LCAO approach in the Crystal package gave worse agreement. The properties of alkali ions also significantly affect the luminescent properties of the compounds, which leads to a strong temperature dependence of the intensity of the ⁵D₀ → ⁷F₄ transition in β-CsEu(SO₄)₂ in contrast to much weaker dependence of this kind in β-RbEu(SO₄)₂.

Study of the Effect of Baicalin from Scutellaria baicalensis on the Gastrointestinal Tract Normoflora and Helicobacter pylori

The antimicrobial properties of baicalin against H. pylori and several probiotic cultures were evaluated. Baicalin was isolated from a dry plant extract obtained by extraction with water at 70 °C. For isolation, extraction was carried out with n-butanol and purification on a chromatographic column. The antimicrobial potential was assessed by evaluating changes in the optical density of the bacterial suspension during cultivation; additionally, the disk diffusion method was used. During the study, the baicalin concentrations (0.25, 0.5, and 1 mg/mL) and the pH of the medium in the range of 1.5-8.0 were tested. The test objects were: suspensions of H. pylori, Lactobacillus casei, L. brevis, Bifidobacterium longum, and B. teenis. It was found that the greater the concentration of the substance in the solution, the greater the delay in the growth of the strain zone. Thus, the highest antimicrobial activity against H. pylori was observed at pH 1.5-2.0 and a baicalin concentration of 1.00 mg/mL. In relation to probiotic strains, a stimulating effect of baicalin (1.00 mg/mL) on the growth of L. casei biomass at pH 1.5-2.0 was observed. The results open up the prospects for the use of baicalin and probiotics for the treatment of diseases caused by H. pylori.

Effect of Dy3+ and Tb3+ Rare-Earth Cation Co-Substitution on the Structure, Magnetic, and Magnetostrictive Properties of Ni-Co-Ferrites

The design and development of electromagnetic and magnetoelectric materials with enhanced properties and performance are desirable for numerous technologies, which are based on integrated electromagnetic materials and components. Nevertheless, engineering the crystalline materials with multi-complex chemistry and multiple cations is challenging. In this context, herein, we report on the effect of rare-earth (RE) cations, namely, Dy³⁺ and Tb³⁺, co-substituted into the Co-Ni-mixed ferrite materials for applications in stress/torque sensors. The RE-cations that co-substituted Co-Ni-ferrite materials with a composition of Ni_0.8Co_0.2Fe_2-x(Dy_1-yTb_y)_xO₄ (x = 0-0.1, y = 0.3; NCFDT) were prepared by the high-temperature solid-state chemical reaction method. The effect of variable composition (x) on the structure, morphology, chemical bonding, and magnetic properties of NCFDT materials is investigated in detail, and the structure-property optimization enabled realizing magnetostrictive NCFDT for sensor applications. X-ray diffraction analysis coupled with Rietveld refinement confirms the face-centered cubic crystal structure. Chemical bonding analysis made using Raman spectroscopic and Fourier transform infrared spectroscopic measurements validates the active modes corresponding to the spinel ferrite structure. The effect of Dy³⁺ and Tb³⁺ substitution is primarily seen in the grain size (range of 5-15 μm), as evident from the scanning electron microscopy patterns. Energy-dispersive spectroscopy confirms the presence of all constituent elements with expected composition and without any impurities. The magnetic property measurements indicate that the remnant magnetization (M_r) increases from 0.06 to 0.17 μ_B/f.u. with the rare-earth (Dy and Tb) substitution and has achieved the maximum squareness ratio (M_r/M_s) = 0.097 at x = 0.10. To validate their application potential in magneto-mechanical sensors, we have measured the magnetostriction coefficients (λ₁₁ and λ₁₂), which demonstrate high values of λ₁₁ = -92 ppm (along the parallel direction) and λ₁₂ = 66 ppm (along the perpendicular direction) for NCFDT with x = 0.05 at H = 7000 Oe. In addition, the maximum value of strain sensitivity is observed, particularly dλ11dH = -0.764 nm/A whereas dλ12dH = 0.361 nm/A. The correlation between strain sensitivity (dλ/dH) and susceptibility (dM/dH), as derived from magnetostriction and magnetization measurements, respectively, is established. The outcomes of this study indicate that Ni-Co-ferrites with Dy³⁺ and Tb³⁺ substitution are suitable for stress/torque sensors. These NCFDT ferrites may also be useful as a necessary constitutive phase for the manufacture of magnetoelectric composite materials, making them appropriate for magnetic field sensors and energy harvesting applications.

Precise Hue Control in a Single-Component White-Light Emitting Perovskite Cs2 SnCl6 through Defect Engineering Based on La3+ Doping

Single-component white light emitters based on the all-inorganic perovskites will act as outstanding candidates for applications in solid-state lighting thanks to their abundant energy states for self-trapped excitons (STE) with ultra-high photoluminescence (PL) efficiency. Here, a complementary white light is realized by dual STEs emissions with blue and yellow colors in a single-component perovskite Cs₂ SnCl₆ :La³⁺ microcrystal (MC). The dual emission bands centered at 450 and 560 nm are attributed to the intrinsic STE1 emission in host lattice Cs₂ SnCl₆ and the STE2 emission induced by the heterovalent La³⁺ doping, respectively. The hue of the white light can be tunable through energy transfer between the two STEs, the variation of excitation wavelength, and the Sn⁴⁺ /Cs⁺ ratios in starting materials. The effects of the doping heterovalent La³⁺ ions on the electronic structure and photophysical properties of the Cs₂ SnCl₆ crystals and the created impurity point defect states are investigated by the chemical potentials calculated using density functional theory (DFT) and confirmed by the experimental results. These results provide a facile approach to gaining novel single-component white light emitter and offer fundamental insights into the defect chemistry in the heterovalent ions doped perovskite luminescent crystals.

"Caught in the Act" @ disruption of A-ET-E process in the recognition of F- by a lamellar EuIII-MOF in heterogeneous manner with logic gate construction: From protagonist idea to implementation world

Development of cost-effective and reliable fluoride sensor for assessing water quality of natural water samples is of immense importance in developing countries as they can provide an easy platform for safeguarding human health. These sensors should be as simple as possible to be fabricated locally by layman. In this context, Eu^III-based MOFs provide trustable platform with bright luminescence in the visible region due to their absorbance-energy transfer-emission (A-ET-E) process. Herein the designed synthesis of a 2D porous coordination polymer, Eu@CMERI, has been carried out following a solvothermal reaction route. The compound shows selective "turn-off" sensing of fluoride in heterogeneous manner from purely aqueous phase and other biological matrices with a detection limit of 28.4 ppb and it carries enormous importance for drinking water analysis under internal regulations. Prohibition of A-ET-E cycle of the Eu^III-MOF is proposed to be the prime reason for fluorescence quenching upon interaction with F^-. DFT studies also revealed that lowest △E_HOMO-LUMO and highest chemical potential value (μ) of F^- are the driving forces for selectivity of Eu^III-MOF towards the targeted anion. The high stability of the porous frameworks along with its interesting sensing features, including fast response and wide linear detection range etc. instigated us not to restrict the chemistry of Eu^III-MOFs at protagonist idea rather to explore its application to real-world analysis. Based on the fluorescence signal exhibited by the targeted analyte, an integrated AND-OR logic gate has also been fabricated which depicts its applicability in molecular electronics. In view of the modular design principle of our polymeric probe, the proposed strategy could open a new horizon to construct powerful sensing materials for ultrafast detection of other important pollutants in the domain of supramolecular chemistry in coming days.

Reactive Flame-Retardant Cotton Fabric Coating: Combustion Behavior, Durability, and Enhanced Retardant Mechanism with Ion Transfer

In recent years, we have witnessed numerous indoor fires caused by the flammable properties of cotton. Flame-retardant cotton deserves our attention. A novel boric acid and diethylenetriaminepenta (methylene-phosphonic acid) (DTPMPA) ammonium salt-based chelating coordination flame retardant (BDA) was successfully prepared for cotton fabrics, and a related retardant mechanism with ion transfer was investigated. BDA can form a stable chemical and coordination bond on the surface of cotton fibers by a simple three-curing finishing process. The limiting oxygen index (LOI) value of BDA-90 increased to 36.1%, and the LOI value of cotton fabric became 30.3% after 50 laundering cycles (LCs) and exhibited excellent durable flame retardancy. Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) methods were used to observe the bonding mode and morphology of BDA on cotton fibers. A synergistic flame-retardant mechanism of condensed and gas phases was concluded from thermogravimetry (TG), cone calorimeter tests, and TG-FTIR. The test results of whiteness and tensile strength showed that the physical properties of BDA-treated cotton fabric were well maintained.

Excitation-Dependent Photoluminescence of BaZrO3:Eu3+ Crystals

The elucidation of local structure, excitation-dependent spectroscopy, and defect engineering in lanthanide ion-doped phosphors was a focal point of research. In this work, we have studied Eu³⁺-doped BaZrO₃ (BZOE) submicron crystals that were synthesized by a molten salt method. The BZOE crystals show orange-red emission tunability under the host and dopant excitations at 279 nm and 395 nm, respectively, and the difference is determined in terms of the asymmetry ratio, Stark splitting, and intensity of the uncommon ⁵D₀ → ⁷F₀ transition. These distinct spectral features remain unaltered under different excitations for the BZOE crystals with Eu³⁺ concentrations of 0-10.0%. The 2.0% Eu³⁺-doped BZOE crystals display the best optical performance in terms of excitation/emission intensity, lifetime, and quantum yield. The X-ray absorption near the edge structure spectral data suggest europium, barium, and zirconium ions to be stabilized in +3, +2, and +4 oxidation states, respectively. The extended X-ray absorption fine structure spectral analysis confirms that, below 2.0% doping, the Eu³⁺ ions occupy the six-coordinated Zr⁴⁺ sites. This work gives complete information about the BZOE phosphor in terms of the dopant oxidation state, the local structure, the excitation-dependent photoluminescence (PL), the concentration-dependent PL, and the origin of PL. Such a complete photophysical analysis opens up a new pathway in perovskite research in the area of phosphors and scintillators with tunable properties.

Investigation on anomalous thermal enhancement and temperature sensing properties of Zn3Mo2O9:Yb3+/RE3+ (RE = Er/Ho) phosphors

In this work, Yb³⁺/RE³⁺ (RE = Er/Ho) co-doped Zn₃Mo₂O₉ phosphors were synthesized by high-temperature solid-state reactions. Under 980 nm excitation, the upconversion (UC) luminescence thermal enhancement was obtained for Zn₃Mo₂O₉:Yb³⁺/RE³⁺ phosphors. The green emission intensity of the Zn₃Mo₂O₉:Yb³⁺/Er³⁺ sample was increased 5 times from 373 to 573 K. The red emission intensity of the Zn₃Mo₂O₉:Yb³⁺/Ho³⁺ sample was enhanced 7.92 times. The anomalous thermal enhancement of UC emission was induced by the negative thermal expansion (NTE) of the Zn₃Mo₂O₉ host. The energy transfer rate from the sensitizer (Yb³⁺) to the activator (RE³⁺) was enhanced because of the lattice contraction and distortion for NTE materials. Compared with the UC emission of Er³⁺single doped Zn₃Mo₂O₉ sample, the luminescence thermal enhancement was absent, which contributed to proving the physical mechanism. The temperature sensing properties of the Zn₃Mo₂O₉:Yb³⁺/Er³⁺ and Zn₃Mo₂O₉:Yb³⁺/Ho³⁺ samples were also investigated based on the fluorescence intensity ratio (FIR) technology. The absolute sensitivity (S_A) and relative sensitivity (S_R) of Zn₃Mo₂O₉:Yb³⁺/Er³⁺ phosphor reached 0.0060 K^-1 and 0.72% K^-1, which is based on the thermal coupling levels (²H_11/2, ⁴S_3/2) FIR of Er³⁺ ions. In addition, the S_A and S_R of Zn₃Mo₂O₉:Yb³⁺/Ho³⁺ phosphor reached 0.0119 K^-1 and 0.86% K^-1, that is based on the non-thermal coupling levels (⁵S₂/⁵F₄, ⁵F₅) FIR of Ho³⁺ ions. The research results indicate that the Zn₃Mo₂O₉ host shows NET. The Yb³⁺/RE³⁺ co-doped Zn₃Mo₂O₉ phosphors are good materials for highly sensitive optical temperature measurement, which can be used to develop thermally enhanced ratiometric optical thermometers.

Synthesis and Characterization of Monodispersed Spherical Calcium Oxide and Calcium Carbonate Nanoparticles via Simple Pyrolysis

In this study, calcium carbonate nanoparticles (CCNPs) and calcium oxide nanoparticles (CONPs) are synthesized by the carbonization/calcination of calcium oleate. CONPs are an essential inorganic material, and they are used as catalysts and as effective chemisorbents for toxic gases. CCNPs are widely used in plastics, printing ink, and medicines. Here, calcium oleate is used as a starting material for the preparation of CCNPs and CONPs. This calcium oleate is prepared from calcium hydroxide and oleic acid in ethanol under mild reflux conditions. The effect of the calcination temperature of calcium oleate is examined during the synthesis of CCNPs and CONPs. By simple carbonization/calcination, calcite-type CCNPs and CONPs are prepared at <550 °C and >600 °C, respectively. The synthesized nanomaterials are analyzed by various physicochemical characterization techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA) with derivative thermogravimetry (DTG), and scanning electron microscopy (SEM) with energy dispersive X-ray analysis. An X-ray diffractometer and the Scherrer formula are used to analyze the crystalline phase and crystallite size of prepared nanoparticles. TGA techniques confirm the thermal stability of the calcium oleate, CCNPs, and CONPs. The SEM analysis illustrates the dispersive behavior and cubic/spherical morphologies of CCNPs/CONPs. Furthermore, the obtained results are compared to the CCNP and CONP samples prepared using calcium hydroxide. As a result, the carbonization/calcination of calcium oleate produces monodispersed CONPs, which are then compared to the CONPs from calcium hydroxide. Additionally, from calcium oleate, CONPs can be prepared on a large scale in a cheap, convenient way, using simple equipment which can be applied in various applications.

Exploration of the Crystal Structure and Thermal and Spectroscopic Properties of Monoclinic Praseodymium Sulfate Pr2(SO4)3

Praseodymium sulfate was obtained by the precipitation method and the crystal structure was determined by Rietveld analysis. Pr₂(SO₄)₃ is crystallized in the monoclinic structure, space group C2/c, with cell parameters a = 21.6052 (4), b = 6.7237 (1) and c = 6.9777 (1) Å, β = 107.9148 (7)°, Z = 4, V = 964.48 (3) ų (T = 150 °C). The thermal expansion of Pr₂(SO₄)₃ is strongly anisotropic. As was obtained by XRD measurements, all cell parameters are increased on heating. However, due to a strong increase of the monoclinic angle β, there is a direction of negative thermal expansion. In the argon atmosphere, Pr₂(SO₄)₃ is stable in the temperature range of T = 30–870 °C. The kinetics of the thermal decomposition process of praseodymium sulfate octahydrate Pr₂(SO₄)₃·8H₂O was studied as well. The vibrational properties of Pr₂(SO₄)₃ were examined by Raman and Fourier-transform infrared absorption spectroscopy methods. The band gap structure of Pr₂(SO₄)₃ was evaluated by ab initio calculations, and it was found that the valence band top is dominated by the p electrons of oxygen ions, while the conduction band bottom is formed by the d electrons of Pr³⁺ ions. The exact position of ZPL is determined via PL and PLE spectra at 77 K to be at 481 nm, and that enabled a correct assignment of luminescent bands. The maximum luminescent band in Pr₂(SO₄)₃ belongs to the ³P₀ → ³F₂ transition at 640 nm.

Low-temperature synthesis of NaRE(WO4)2 films via anion exchange from Layered rare-earth hydroxides (LRHs) films, phase/morphology evolution and photoluminescence

Alkaline lanthanide tungstates NaRE(WO4)2 (RE = La-Ho, and Y) films were hydrothermally synthesized via anion exchange using the electrodeposited layered rare-earth hydroxide (RE2(OH)5NO3·nH2O) films as precursor template in the presence...

Co-crystallization of red emitting (NH4)3Sc(SO4)3:Eu3+ microfibers: structure-luminescence relationship for promising application in optical thermometry

(NH4)3Sc(SO4)3:Eu3+ phosphor has been synthesized as rod-like microparticles by the crystallization from an aqueous solution. Its crystal structure belongs to monoclinic system, space group P21/c, Z = 4. An enantiotropic...

Luminescence properties of Eu2O3-doped ZrO2–Y2O3 single crystals

The optical properties of the Eu3+-doped Y2O3-stabilized ZrO2 crystals demonstrate potential for various applications based on their intense emission of orange light.