Development and Efficacy of Lateral Flow Point-of-Care Testing Devices for Rapid and Mass COVID-19 Diagnosis by the Detections of SARS-CoV-2 Antigen and Anti-SARS-CoV-2 Antibodies

Near-infrared responsive gold nanorods for highly sensitive colorimetric and photothermal lateral flow immuno-detection of SARS-CoV-2

The highly infectious characteristics of coronavirus disease 2019 (COVID-19), which is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), highlight the necessity of sensitive and rapid nucleocapsid (N) protein-based antigen testing for early triage and epidemic management. In this study, a colorimetric and photothermal dual-mode lateral flow immunoassay (LFIA) platform for the rapid and sensitive detection of the SARS-CoV-2 N protein was developed based on gold nanorods (GNRs), which possessed tunable local surface plasma resonance (LSPR) absorption peaks from UV-visible to near-infrared (NIR). The LSPR peak was adjusted to match the NIR emission laser 808 nm by controlling the length-to-diameter ratio, which could maximize the photothermal conversion efficiency and achieve photothermal detection signal amplification. Qualitative detection of SARS-CoV-2 N protein was achieved by observing the strip color, and the limit of detection was 2 ng mL-1, while that for photothermal detection was 0.096 ng mL-1. Artificial saliva samples spiked with the N protein were analyzed with the recoveries ranging from 84.38% to 107.72%. The intra-assay and inter-assay coefficients of variation were 6.76% and 10.39%, respectively. We further evaluated the reliability of this platform by detecting 40 clinical samples collected from nasal swabs, and the results matched well with that of nucleic acid detection (87.5%). This method shows great promise in early disease diagnosis and screening.

Self-Diagnosis of SARS-CoV-2 from Saliva Samples at Home: Isothermal Amplification Enabled by Do-It-Yourself Portable Incubators and Laminated Poly-ethyl Sulfonate Membranes

COVID-19 made explicit the need for rethinking the way in which we conduct testing for epidemic emergencies. During the COVID-19 pandemic, the dependence on centralized lab facilities and resource-intensive methodologies (e.g., RT-qPCR methods) greatly limited the deployment of widespread testing efforts in many developed and underdeveloped countries. Here, we illustrate the development of a simple and portable diagnostic kit that enables self-diagnosis of COVID-19 at home from saliva samples. We describe the development of a do-it-yourself (DIY) incubator for Eppendorf tubes that can be used to conduct SARS-CoV-2 detection with competitive sensitivity and selectivity from saliva at home. In a proof-of-concept experiment, we assembled Eppendorf-tube incubators at our home shop, prepared a single-tube mix of reagents and LAMP primers in our lab, and deployed these COVID-19 detection kits using urban delivery systems (i.e., Rappifavor or Uber) to more than 15 different locations in Monterrey, México. This straightforward strategy enabled rapid and cost-effective at-home molecular diagnostics of SARS-CoV-2 from real saliva samples with a high sensitivity (100%) and high selectivity (87%).

Innovation and Patenting Activities During COVID-19 and Advancement of Biochemical and Molecular Diagnosis in the Post- COVID-19 Era

The COVID-19 pandemic is to escalate globally and acquire new mutations quickly, so accurate diagnostic technologies play a vital role in controlling and understanding the epidemiology of the disease. A plethora of technologies acquires diagnosis of individuals and informs clinical management of COVID. Some important biochemical parameters for COVID diagnosis are the elevation of liver enzymes, creatinine, and nonspecific inflammatory markers such as C-reactive protein (CRP) and Interleukin 6 (IL-6). The main progression predictors are lymphopenia, elevated D-dimer, and hyperferritinemia, although it is also necessary to consider LDH, CPK, and troponin in the marker panel of diagnosis. Owing to the greater sensitivity and accuracy, molecular technologies such as conventional polymerase chain reaction (PCR), reverse transcription (RT)-PCR, nested PCR, loop-mediated isothermal amplification (LAMP), and xMAP technology have been extensively used for COVID diagnosis for some time now. To make so many diagnostics accessible to general people, many techniques may be exploited, including point of care (POC), also called bedside testing, which is developing as a portable promising tool in pathogen identification. Some other lateral flow assay (LFA)-centered techniques like SHERLOCK, CRISPR-Cas12a (AIOD-CRISPR), and FNCAS9 editor limited uniform detection assay (FELUDA), etc. have shown auspicious results in the rapid detection of pathogens. More recently, low-cost sequencing and advancements in big data management have resulted in a slow but steady rise of next-generation sequencing (NGS)-based approaches for diagnosis that have potential relevance for clinical purposes and may pave the way toward a better future. Due to the COVID-19 pandemic, various institutions provided free, specialized websites and tools to promote research and access to critically needed advanced solutions by alleviating research and analysis of data within a substantial body of scientific and patent literature regarding biochemical and molecular diagnosis published since January 2020. This circumstance is unquestionably unique and difficult for anyone using patent information to find pertinent disclosures at a specific date in a trustworthy manner.

Immunochromatographic enhancement strategy for SARS-CoV-2 detection based on nanotechnology

The global outbreak of coronavirus disease 2019 (COVID-19) has been catastrophic to both human health and social development. Therefore, developing highly reliable and sensitive point-of-care testing (POCT) for detecting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has become a priority. Among all available POCTs, the lateral flow immunoassay (LFIA, also known as immunochromatography) has proved to be effective due to its accuracy, portability, convenience, and speed. In areas with a scarcity of laboratory resources and medical personnel, the LFIA provides an affordable option for the diagnosis of COVID-19. This review offers a comprehensive overview of methods for improving the sensitivity of SARS-CoV-2 detection using immunochromatography based on nanotechnology, sorted according to the different detection targets (antigens, antibodies, and nucleic acids). It also looks into the performance and properties of the various sensitivity enhancement strategies, before delving into the remaining challenges in COVID-19 diagnosis through LFIA. Ultimately, it seeks to provide helpful guidance in selecting an appropriate strategy for SARS-CoV-2 immunochromatographic detection based on nanotechnology.

Paper-based colorimetric sensors for point-of-care testing

By eliminating the need for sample transportation and centralized laboratory analysis, point-of-care testing (POCT) enables on-the-spot testing, with results available within minutes, leading to improved patient management and overall healthcare efficiency. Motivated by the rapid development of POCT, paper-based colorimetric sensing, a powerful analytical technique that exploits the changes in color or absorbance of a chemical species to detect and quantify analytes of interest, has garnered increasing attention. In this review, we strive to provide a bird's eye view of the development landscape of paper-based colorimetric sensors that harness the unique properties of paper to create low-cost, easy-to-use, and disposable analytical devices, thematically covering both fundamental aspects and categorized applications. In the end, we authors summarized the review with the remaining challenges and emerging opportunities. Hopefully, this review will ignite new research endeavors in the realm of paper-based colorimetric sensors.

Test performance of lateral flow rapid antigen tests for COVID-19 in Welsh adult care home staff using routine surveillance data

BACKGROUND

Lateral flow tests (LFTs) have been used to screen for SARS-CoV2 in Wales since January 2021. Between May and August 2021, adult care home staff policy was for biweekly Innova LFT and weekly Polymerase Chain Reaction (PCR) testing while asymptomatic. We estimated test performance of LFTs conducted in adult care home staff using PCR tests as a reference standard.

METHODS

Test results from surveillance data were matched by individual where both LFT and PCR were taken on the same day. We calculated sensitivity, specificity, positive and negative predictive values, and agreement using Matthew's correlation coefficient. Ct values of positive PCR results were compared by matched LFT result. Analysis was conducted using R v4.1.3.

RESULTS

We analysed 115,593 test pairs, 499 (0.43%) of which were PCR positive. Median age was 48 (IQR: 22) and 85.00% of the study population were female. Test result agreement was 99.59% (95%CI 99.55-99.63; MCC: 0.38, p<0.001). Sensitivity and specificity were 25.65% (95%CI 22.02-29.67) and 99.91% (95%CI 99.89-99.93), respectively. PPV was 55.90% (95%CI 49.42-62.17) and NPV was 99.68% (95%CI 99.64-99.71). Crude Ct values were significantly lower in positive PCR tests matched to a positive LFT compared to a negative LFT.

CONCLUSIONS

Specificity and negative predictive value were high in an asymptomatic population of care home staff indicating this test is an effective tool for identifying cases of SARS-CoV-2 infection during periods of high prevalence where transmission is likely, due to the presence of high viral loads. Positive predictive value results are lower than existing literature yet should be considered in light of the asymptomatic study population and low prevalence (under 1%) at the time most of these tests were conducted. Performance improved at times of higher prevalence during the study. These results suggest that whilst lateral flow tests are effective for identifying SARS-COV-2 infections with high viral loads, they are not effective at identifying cases with a low viral load. When an LFT provides a negative result, false negatives should be considered and additional diagnostic tests performed.

Recent Advances in Quantum Dot-Based Lateral Flow Immunoassays for the Rapid, Point-of-Care Diagnosis of COVID-19

The COVID-19 pandemic has spurred demand for efficient and rapid diagnostic tools that can be deployed at point of care to quickly identify infected individuals. Existing detection methods are time consuming and they lack sensitivity. Point-of-care testing (POCT) has emerged as a promising alternative due to its user-friendliness, rapidity, and high specificity and sensitivity. Such tests can be conveniently conducted at the patient's bedside. Immunodiagnostic methods that offer the rapid identification of positive cases are urgently required. Quantum dots (QDs), known for their multimodal properties, have shown potential in terms of combating or inhibiting the COVID-19 virus. When coupled with specific antibodies, QDs enable the highly sensitive detection of viral antigens in patient samples. Conventional lateral flow immunoassays (LFAs) have been widely used for diagnostic testing due to their simplicity, low cost, and portability. However, they often lack the sensitivity required to accurately detect low viral loads. Quantum dot (QD)-based lateral flow immunoassays have emerged as a promising alternative, offering significant advancements in sensitivity and specificity. Moreover, the lateral flow immunoassay (LFIA) method, which fulfils POCT standards, has gained popularity in diagnosing COVID-19. This review focuses on recent advancements in QD-based LFIA for rapid POCT COVID-19 diagnosis. Strategies to enhance sensitivity using QDs are explored, and the underlying principles of LFIA are elucidated. The benefits of using the QD-based LFIA as a POCT method are highlighted, and its published performance in COVID-19 diagnostics is examined. Overall, the integration of quantum dots with LFIA holds immense promise in terms of revolutionizing COVID-19 detection, treatment, and prevention, offering a convenient and effective approach to combat the pandemic.

Advancements in portable instruments based on affinity-capture-migration and affinity-capture-separation for use in clinical testing and life science applications

The shift from testing at centralized diagnostic laboratories to remote locations is being driven by the development of point-of-care (POC) instruments and represents a transformative moment in medicine. POC instruments address the need for rapid results that can inform faster therapeutic decisions and interventions. These instruments are especially valuable in the field, such as in an ambulance, or in remote and rural locations. The development of telehealth, enabled by advancements in digital technologies like smartphones and cloud computing, is also aiding in this evolution, allowing medical professionals to provide care remotely, potentially reducing healthcare costs and improving patient longevity. One notable POC device is the lateral flow immunoassay (LFIA), which played a major role in addressing the COVID-19 pandemic due to its ease of use, rapid analysis time, and low cost. However, LFIA tests exhibit relatively low analytical sensitivity and provide semi-quantitative information, indicating either a positive, negative, or inconclusive result, which can be attributed to its one-dimensional format. Immunoaffinity capillary electrophoresis (IACE), on the other hand, offers a two-dimensional format that includes an affinity-capture step of one or more matrix constituents followed by release and electrophoretic separation. The method provides greater analytical sensitivity, and quantitative information, thereby reducing the rate of false positives, false negatives, and inconclusive results. Combining LFIA and IACE technologies can thus provide an effective and economical solution for screening, confirming results, and monitoring patient progress, representing a key strategy in advancing diagnostics in healthcare.

Enhancing a SARS-CoV-2 nucleocapsid antigen test sensitivity with cost efficient strategy through a cotton intermembrane insertion

Lateral flow antigen tests have been widely used in the Covid-19 pandemic, allowing faster diagnostic test results and preventing further viral spread through isolation of infected individuals. Accomplishment of this screening must be performed with tests that show satisfactory sensitivity in order to successfully detect the target protein and avoid false negatives. The aim of this study was to create a lateral flow test that could detect SARS-CoV-2 nucleocapsid protein in low concentrations that were comparable to the limits of detection claimed by existing tests from the market. To do so, several adjustments were necessary during research and development of the prototypes until they were consistent with these criteria. The proposed alternatives of increasing the test line antibody concentration and addition of an intermembrane between the conjugate pad and the nitrocellulose membrane were able to increase the sensitivity four-fold and generate a new rapid test prototype called "lateral flow intermembrane immunoassay test" (LFIIT). This prototype showed an adequate limit of detection (2.0 ng mL^-1) while maintaining affordability and simplicity in manufacturing processes.

Stability of the COVID-19 At-Home Test after Exposure to Extreme Temperatures

To ensure sufficient sensitivity and specificity of lateral flow tests for the detection of SARS-CoV-2 antigen, manufacturers recommend appropriate conditions for storage, including a temperature range. However, there is a high likelihood that kits will be exposed to temperatures outside of this range during transit to some regions. In this prospective study, we evaluated the sensitivity and specificity of the COVID-19 At-Home Test kits (manufactured by SD Biosensor/distributed by Roche) currently being delivered through a US Government program, after exposure to a range of hot and cold temperatures. COVID-19 At-Home Test kits were stored at up to 5 different temperatures: frozen (-4.0°F [-20.0°C]), refrigerated (42.8°F [6.0°C]), room temperature (68.0°F [20.0°C]), warm (98.0°F [36.7°C]), and excessive heat (118.0 to 126.0°F [47.8 to 52.2°C]) for 24 h and left at room temperature for 60, 90, or 120 min before use. Test kits were also stored for 48 h, 1 week, or 2 weeks in frozen, warm, and excessive heat conditions, and left for 60 or 120 min before use. In each scenario (storage temperature + time at room temperature), 5 positive and 5 negative control samples were applied, and line intensity was recorded using a color scale (0 to 100%). In every scenario, every positive sample resulted in strong signal intensity (≥26%), and every negative sample returned a negative result. This study suggests that exposure of up to 2 weeks to extreme temperatures, such as those that may occur in transit, does not impact the stability of the COVID-19 At-Home Test. IMPORTANCE COVID-19 At-Home Test kits may be exposed to extreme temperatures in transit, which may impact test sensitivity and specificity. We investigated assay ability to identify SARS-CoV-2 antigen after 24 h to 2 weeks in frozen, refrigerated, room temperature, warm, or excessive heat conditions. The assay correctly identified all positive and negative samples in all scenarios. This study suggests that exposure of up to 2 weeks to extreme temperatures, such as those that may occur in transit, does not impact the stability of the COVID-19 At-Home Test.

Gold nanoparticle conjugate-based lateral flow immunoassay (LFIA) for rapid detection of RBD antigen of SARS-CoV-2 in clinical samples using a smartphone-based application

The coronavirus disease 2019 (COVID-19) pandemic has emphasized the need for development of a rapid diagnostic device for the effective treatment and its mitigation. Lateral flow immunoassay (LFIA) belongs to a class of diagnostic devices, which has the benefit of providing quick results, easy to handle, low cost, and on-site applicable. So far, several LFIA has been developed for the detection of infectious severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2), however, only a few of them are antigen (Ag)-based. Here, we describe an antibody (Ab)-labeled gold nanoparticles (AuNPs)-based LFIA (AuNPs-LFIA) for the detection of Receptor-Binding Domain (RBD) of SARS-CoV-2. For this, RBD Ab of SARS-CoV-2 was conjugated with the AuNPs, which served as a detecting probe. The fabricated LFIA strip was optimized for different parameters such as membrane pore size, blocking conditions, Ab coating concentration, and conjugate incubation. The optimized LFIA strips were validated in spiked buffer samples and the optimal limit of detection was found to be 1 ng/ml, which was confirmed by a smartphone-based application. Moreover, the developed AuNPs-LFIA strips effectively detected RBD Ag in 100 clinical samples with 94.3% sensitivity and 90.9% specificity in clinical samples when compared with the gold standard (RT-PCR). The fabricated LFIAs are reported to have storage stability of up to 21 days at 4°C and room temperature (RT). Hence, the developed LFIA can be used as a portable, cost-effective diagnostic device for rapid detection of SARS-CoV-2.

Role of Wearable Sensing Technology to Manage Long COVID

Long COVID consequences have changed the perception towards disease management, and it is moving towards personal healthcare monitoring. In this regard, wearable devices have revolutionized the personal healthcare sector to track and monitor physiological parameters of the human body continuously. This would be largely beneficial for early detection (asymptomatic and pre-symptomatic cases of COVID-19), live patient conditions, and long COVID monitoring (COVID recovered patients and healthy individuals) for better COVID-19 management. There are multitude of wearable devices that can observe various human body parameters for remotely monitoring patients and self-monitoring mode for individuals. Smart watches, smart tattoos, rings, smart facemasks, nano-patches, etc., have emerged as the monitoring devices for key physiological parameters, such as body temperature, respiration rate, heart rate, oxygen level, etc. This review includes long COVID challenges for frequent monitoring of biometrics and its possible solution with wearable device technologies for diagnosis and post-therapy of diseases.

Paper-Based Biosensors for the Detection of Nucleic Acids from Pathogens

Paper-based biosensors are microfluidic analytical devices used for the detection of biochemical substances. The unique properties of paper-based biosensors, including low cost, portability, disposability, and ease of use, make them an excellent tool for point-of-care testing. Among all analyte detection methods, nucleic acid-based pathogen detection offers versatility due to the ease of nucleic acid synthesis. In a point-of-care testing context, the combination of nucleic acid detection and a paper-based platform allows for accurate detection. This review offers an overview of contemporary paper-based biosensors for detecting nucleic acids from pathogens. The methods and limitations of implementing an integrated portable paper-based platform are discussed. The review concludes with potential directions for future research in the development of paper-based biosensors.

Recent developments in the use of gold and silver nanoparticles in biomedicine

Gold and silver nanoparticles (NPs) are widely used in the biomedical research both in the therapeutic and the sensing/diagnostics fronts. Both metals share some common optical properties with surface plasmon resonance being the most widely exploited property in therapeutics and diagnostics. Au NPs exhibit excellent light‐to‐heat conversion efficiencies and hence have found applications primarily in precision oncology, while Ag NPs have excellent antibacterial properties which can be harnessed in biomaterials' design. Both metals constitute excellent biosensing platforms owing to their plasmonic properties and are now routinely used in various optical platforms. The utilization of Au and Ag NPs in the COVID‐19 pandemic was rapidly expanded mostly in biosensing and point‐of‐care platforms and to some extent in therapeutics. In this review article, the main physicochemical properties of Au and Ag NPs are discussed with selective examples from the recent literature.

This article is categorized under:

Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease

Diagnostic Tools > In Vitro Nanoparticle‐Based Sensing

Nanotechnology Approaches to Biology > Nanoscale Systems in Biology

Visual Detection of COVID-19 from Materials Aspect

ABSTRACT

In the recent COVID-19 pandemic, World Health Organization emphasized that early detection is an effective strategy to reduce the spread of SARS-CoV-2 viruses. Several diagnostic methods, such as reverse transcription-polymerase chain reaction (RT-PCR) and lateral flow immunoassay (LFIA), have been applied based on the mechanism of specific recognition and binding of the probes to viruses or viral antigens. Although the remarkable progress, these methods still suffer from inadequate cellular materials or errors in the detection and sampling procedure of nasopharyngeal/oropharyngeal swab collection. Therefore, developing accurate, ultrafast, and visualized detection calls for more advanced materials and technology urgently to fight against the epidemic. In this review, we first summarize the current methodologies for SARS-CoV-2 diagnosis. Then, recent representative examples are introduced based on various output signals (e.g., colorimetric, fluorometric, electronic, acoustic). Finally, we discuss the limitations of the methods and provide our perspectives on priorities for future test development.

A Low-Cost Handheld Impedimetric Biosensing System for Rapid Diagnostics of SARS-CoV-2 Infections

Current laboratory diagnostic approaches for virus detection give reliable results, but they require a lengthy procedure, trained personnel, and expensive equipment and reagents; hence, they are not a suitable choice for home monitoring purposes. This paper addresses this challenge by developing a portable impedimetric biosensing system for the identification of COVID-19 patients. This sensing system has two main parts: a throwaway two-working electrode (2-WE) strip and a novel read-out circuit, specifically designed for simultaneous signal acquisition from both working electrodes. Highly reliable electrochemical signal tracking from multiplex immunosensors provides a potential for flexible and portable multi-biomarker detection. The electrodes' surfaces were functionalized with SARS-CoV-2 Nucleocapsid Antibody enabling the selective detection of Nucleocapsid protein (N-protein) along with self-validation in the clinical nasopharyngeal swab specimens. The proposed programmable highly sensitive impedance read-out system allows for a wide dynamic detection range, which makes the sensor capable of detecting N-protein concentrations between 0.116 and 10,000 pg/mL. This lightweight and economical read-out arrangement is an ideal prospect for being mass-produced, especially during urgent pandemic situations. Also, such an impedimetric sensing platform has the potential to be redesigned for targeting not only other infectious diseases but also other critical disorders.

Development of Lateral Flow Immunochromatographic Test for Rapid Detection of SARS-CoV-2 Virus Antigens in Clinical Specimens

In the presented study, we developed a nanogold lateral glow immunoassay-based technique (LFI-COVID-19 antigen test) for the detection of SARS-CoV-2 nucleocapsid proteins; the developed LFI-COVID-19 Ag test has been tested for limit of detection (LOD), cross-reactivity and interfering substances, and performance. It was found that the performance of the developed LFI-COVID-19 antigen test when it was evaluated by RT-qPCR indicated 95, 98, and 97% for sensitivity, specificity and accuracy, respectively. This complies with the WHO guidelines. It was concluded that the developed LFI-COVID-19 antigen test is a point of care and an alternative approach to current laboratory methods, especially RT-qPCR. It provides an easy, rapid (within 20 min), and on-site diagnostic tool for COVID-19 infection, and it is a cheap test if it is manufactured on a large scale for commercial use.

Recent Progress on Rapid Lateral Flow Assay-Based Early Diagnosis of COVID-19

The outbreak of the coronavirus disease 2019 (COVID-19) has resulted in enormous losses worldwide. Through effective control measures and vaccination, prevention and curbing have proven significantly effective; however, the disease has still not been eliminated. Therefore, it is necessary to develop a simple, convenient, and rapid detection strategy for controlling disease recurrence and transmission. Taking advantage of their low-cost and simple operation, point-of-care test (POCT) kits for COVID-19 based on the lateral flow assay (LFA) chemistry have become one of the most convenient and widely used screening tools for pathogens in hospitals and at home. In this review, we introduce essential features of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus, compare existing detection methods, and focus on the principles, merits and limitations of the LFAs based on viral nucleic acids, antigens, and corresponding antibodies. A systematic comparison was realized through summarization and analyses, providing a comprehensive demonstration of the LFA technology and insights into preventing and curbing the COVID-19 pandemic.

Opposite Raman Shift of Ring Stretching Dependent on the Coordinated Silver Volume in Surface-Enhanced Raman Spectroscopy of Polypyrrole

Surface-enhanced Raman spectroscopy (SERS) can sense some molecules in a nondestructive manner. Using SERS, we investigate the shifts in the Raman peaks of polypyrrole (PPy) with two different coordinated silver (Ag) structures, Ag nanoparticles (NPs) and Ag dendrite film. The SERS spectrum of PPy with Ag NPs presents a ring-stretching peak that is red-shifted compared to the ring-stretching peak in the Raman spectrum of PPy. In contrast, the spectrum of the PPy with the Ag dendrite film exhibits a blue-shifted ring stretching peak. The various coordinated Ag nanostructures result in opposite Raman shifts of the ring stretching peak; this phenomenon has been investigated and confirmed by density functional theory (DFT) calculations of the Raman shift of the pyrrole (Py) molecule with a Ag layer (SERS of PPy with Ag NPs) and that of a charge-transferred Py molecule (SERS of PPy with Ag dendrite films). This result demonstrates that DFT calculations can be an effective tool to scrutinize Raman shifts in SERS.