Bacterial Colonization and Tissue Compatibility of Denture Base Resins

Different Polymers for the Base of Removable Dentures? Part II: A Narrative Review of the Dynamics of Microbial Plaque Formation on Dentures

This review focuses on the current disparities and gaps in research on the characteristics of the oral ecosystem of denture wearers, making a unique contribution to the literature on this topic. We aimed to synthesize the literature on the state of current knowledge concerning the biological behavior of the different polymers used in prosthetics. Whichever polymer is used in the composition of the prosthetic base (poly methyl methacrylate acrylic (PMMA), polyamide (PA), or polyether ether ketone (PEEK)), the simple presence of a removable prosthesis in the oral cavity can disturb the balance of the oral microbiota. This phenomenon is aggravated by poor oral hygiene, resulting in an increased microbial load coupled with the reduced salivation that is associated with older patients. In 15-70% of patients, this imbalance leads to the appearance of inflammation under the prosthesis (denture stomatitis, DS). DS is dependent on the equilibrium-as well as on the reciprocal, fragile, and constantly dynamic conditions-between the host and the microbiome in the oral cavity. Several local and general parameters contribute to this balance. Locally, the formation of microbial plaque on dentures (DMP) depends on the phenomena of adhesion, aggregation, and accumulation of microorganisms. To limit DMP, apart from oral and lifestyle hygiene, the prosthesis must be polished and regularly immersed in a disinfectant bath. It can also be covered with an insulating coating. In the long term, relining and maintenance of the prosthesis must also be established to control microbial proliferation. On the other hand, several general conditions specific to the host (aging; heredity; allergies; diseases such as diabetes mellitus or cardiovascular, respiratory, or digestive diseases; and immunodeficiencies) can make the management of DS difficult. Thus, the second part of this review addresses the complexity of the management of DMP depending on the polymer used. The methodology followed in this review comprised the formulation of a search strategy, definition of the inclusion and exclusion criteria, and selection of studies for analysis. The PubMed database was searched independently for pertinent studies. A total of 213 titles were retrieved from the electronic databases, and after applying the exclusion criteria, we selected 84 articles on the possible microbial interactions between the prosthesis and the oral environment, with a particular emphasis on Candida albicans.

Evaluation of the flexural strength of orthodontic acrylic resin incorporated with propolis nanoparticles: an in vitro study

AIM

Nanopropolis has become the subject of interest in medicine and dentistry as a natural product due to its outstanding properties, particularly antimicrobial activity. This study aimed at investigating the effect of nanopropolis on flexural strength of polymethyl methacrylate (PMMA).

Long-term application of silver nanoparticles in dental restoration materials: potential toxic injury to the CNS

Silver nanoparticles (AgNPs) have durable and remarkable antimicrobial effects on pathogenic microorganisms, such as bacteria and fungi, in dental plaques. As such, they are widely added to dental restoration materials, including composite resins, denture bases, adhesives, and implants, to solve the problems of denture stomatitis, peri-implant inflammation, and oral infection caused by the long-term use of these dental restoration materials. However, AgNPs can be absorbed into the blood circulatory system through the nasal/oral mucosa, lungs, gastrointestinal tract, skin, and other pathways and then distributed into the lungs, kidneys, liver, spleen, and testes, thereby causing toxic injury to these tissues and organs. It can even be transported across the blood-brain barrier (BBB) and continuously accumulate in brain tissues, causing injury and dysfunction of neurons and glial cells; consequently, neurotoxicity occurs. Other nanomaterials with antibacterial or remineralization properties are added to dental restoration materials with AgNPs. However, studies have yet to reveal the neurotoxicity caused by dental restoration materials containing AgNPs. In this review, we summarize the application of AgNPs in dental restoration materials, the mechanism of AgNPs in cytotoxicity and toxic injury to the BBB, and the related research on the accumulation of AgNPs to cause changes of neurotoxicity. We also discuss the mechanisms of neurotoxicity caused by AgNPs and the mode and rate of AgNPs released from dental restorative materials added with AgNPs to evaluate the probability of neurotoxic injury to the central nervous system (CNS), and then provide a theoretical basis for developing new composite dental restoration materials. Mechanism of neurotoxicity caused by AgNPs: AgNPs in the blood circulation enter the brain tissue after being transported across the BBB through transendothelial cell pathway and paracellular transport pathway, and continuously accumulate in brain tissue, causing damage and dysfunction of neurons and glial cells which ultimately leads to neurotoxicity. The uptake of AgNPs by neurons, astrocytes and microglia causes damage to these cells. AgNPs with non-neurotoxic level often increases the secretion of a variety of cytokines, up-regulates the expression of metallothionein in glial cells, even up-regulates autophagy and inflammation response to protect neurons from the toxic damage of AgNPs. However, the protective effect of glial cells induced by AgNPs exposure to neurotoxic levels is insufficient, which leads to neuronal damage and dysfunction and even neuronal programmed cell death, eventually cause neurotoxicity.

Characterization of the Oral Microbiome in Wearers of Fixed and Removable Implant or Non-Implant-Supported Prostheses in Healthy and Pathological Oral Conditions: A Narrative Review

Oral commensal microorganisms perform very important functions such as contributing to the health of the host. However, the oral microbiota also plays an important role in the pathogenesis and development of various oral and systemic diseases. The oral microbiome may be characterized by a higher prevalence of some microorganisms than others in subjects with removable or fixed prostheses, depending on oral health conditions, the prosthetic materials used, and any pathological conditions brought about by inadequate prosthetic manufacturing or poor oral hygiene. Both biotic and abiotic surfaces of removable and fixed prostheses can be easily colonized by bacteria, fungi, and viruses, which can become potential pathogens. The oral hygiene of denture wearers is often inadequate, and this can promote oral dysbiosis and the switch of microorganisms from commensal to pathogens. In light of what emerged from this review, fixed and removable dental prostheses on teeth and on implants are subject to bacterial colonization and can contribute to the formation of bacterial plaque. It is of fundamental importance to carry out the daily hygiene procedures of prosthetic products, to design the prosthesis to facilitate the patient's home oral hygiene practices, and to use products against plaque accumulation or capable of reducing oral dysbiosis to improve patients' home oral practices. Therefore, this review primarily aimed to analyze the oral microbiome composition in fixed and removable implant or non-implant-supported prostheses wearers in healthy and pathological oral conditions. Secondly, this review aims to point out related periodontal self-care recommendations for oral dysbiosis prevention and periodontal health maintenance in fixed and removable implant or non-implant-supported prostheses wearers.

Influence of Contemporary Photoactivated Disinfection on the Mechanical Properties and Antimicrobial Activity of PMMA Denture Base: A Systematic Review and Meta Analysis

PURPOSE

The present study aimed to perform a systematic review and meta-analysis to investigate the effectiveness of the contemporary photoactivated disinfection methods on the mechanical features and/or antimicrobial activity of polymethyl methacrylate (PMMA) dentures bases.

METHODS

THE FOCUSED RESEARCH QUESTION WAS: : "What is the effect of contemporary photoactivated disinfection methods as compared to conventional disinfection protocols on the mechanical features and/or antimicrobial activity of PMMA dentures bases?". An electronic literature search was carried out by the author and a senior librarian specialized in health sciences on Web of Science, PubMed, and Scopus. In vitro investigations evaluating the antimicrobial and/or mechanical effects of photoactivated disinfectants as compared to conventional chemical disinfectants on the microbes formed on PMMA denture bases were included. Meta-analysis was performed for calculating the standard mean difference (SMD) with a 95% confidence interval.

RESULTS

Four out of eight studies concluded that photoactivated disinfectants, including riboflavin-mediated photodynamic therapy (PDT), hematoporphyrin-mediated PDT, poly-L-glycolic acid loaded with methylene blue, Erbium, chromium-doped yttrium, scandium, gallium, and garnet (Er,Cr:YSGG) laser, erbium-doped yttrium-aluminum-garnet (Er:YAG) laser, and chitosan-mediated PDT, demonstrated a significant reduction in colony-forming unit per milliliter (CFU/mL) of exposed viable colonies of Escherichia coli (E. coli), Streptococcus mutans (S. mutans), Staphylococcus aureus (S. aureus), and Candida albicans (C. albicans) comparable to the conventionally used chemical disinfectants of PMMA denture bases. Contrarily, two studies concluded that the PMMA denture base colonized with C. albicans and disinfected with conventional chemical disinfectants showed the greatest anti-fungal efficaciousness. All the included studies concluded that the application of photoactivated disinfectants does not negatively impact the mechanical features of the PMMA denture bases colonized with microbes including E. coli, S. mutans, S. aureus, and C. albicans. The meta-analysis revealed statistically significant reduction in C. albicans counts (CFU/mL [Log10]) (p < 0.00001) and improvement in the flexural strength (p = 0.0002) of PMMA-based denture base after the application of conventional disinfectants, while a statistically significant improvement in the fracture strength of PMMA-based denture base was observed after the application of photoactivated disinfectants (p = 0.03).

CONCLUSION

According to the systematic review (qualitative synthesis), photoactivated disinfectants demonstrated comparable mechanical features and antimicrobial activity of PMMA dentures bases to conventional chemical disinfectants suggesting their potential to be utilized as an alternative to conventional chemical disinfectants. However, the meta-analysis (quantitative synthesis) revealed that the application of conventional disinfectants demonstrated better outcomes related to antimicrobial activity and flexural strength of PMMA-based denture based.

The denture microbiome in health and disease: an exploration of a unique community

The United Nations suggests the global population of denture wearers (an artificial device that acts as a replacement for teeth) is likely to rise significantly by the year 2050. Dentures become colonized by microbial biofilms, the composition of which is influenced by complex factors such as patient’s age and health, and the nature of the denture material. Since colonization (and subsequent biofilm formation) by some micro‐organisms can significantly impact the health of the denture wearer, the study of denture microbiology has long been of interest to researchers. The specific local and systemic health risks of denture plaque are different from those of dental plaque, particularly with respect to the presence of the opportunist pathogen Candida albicans and various other nonoral opportunists. Here, we reflect on advancements in our understanding of the relationship between micro‐organisms, dentures, and the host, and highlight how our growing knowledge of the microbiome, biofilms, and novel antimicrobial technologies may better inform diagnosis, treatment, and prevention of denture‐associated infections, thereby enhancing the quality and longevity of denture wearers.

Mechanical and antimicrobial effects of riboflavin-mediated photosensitization of in vitro C. albicans formed on polymethyl methacrylate resin

PURPOSE

This study assessed the potential of riboflavin-mediated photodynamic therapy (RF-PDT) against Candida albicans (C. albicans) and compared the effects of RF-PDT with other therapeutic modalities in terms of mechanical and surface characteristics of acrylic denture base material.

MATERIALS AND METHODS

Molds (10 × 10 × 2 mm) of acrylic resin specimens were prepared and underwent artificial ageing. C. albicans were grown aerobically over the specimens and divided into four groups (n = 10/group); Group-I: no decontamination; Group-II: nystatin suspension; Group-III: riboflavin 0.1% in darkness, Group-IV: blue LED light only, and Group-V: riboflavin 0.1% for 10 minutes (pre-irradiation time) and photoactivated by the blue LED light (light dose). Fungal viability was assessed using MTT assay and characterized using scanning electron microscopy and confocal laser microscopy (CLSM). Treated specimens were subjected to surface roughness (R_a), flexural strength (FS), and flexural modulus (FM).

RESULTS

Group-I showed the highest C. albicans viability followed by Group-III. Nystatin group (Group-II) showed ∼50% of the viability while RF-PDT showed the least C. albicans viability among the four groups (p<0.05). On SEM, specimens treated with Group-IV and V showed almost clear and free from C. albicans that was evidenced on CLSM. Post-treated specimens and storage after 72 h revealed that FS was significantly higher for RF-PDT group as compared to any other group (>105.82 MPa) (p<0.05). The FM and Ra showed statistically no significant difference between the groups (p>0.05).

CONCLUSION

RF-PDT showed the highest anti-fungal capacity against C. albicans over acrylic denture surface without any surface deterioration.

Heat-cured poly(methyl methacrylate) resin incorporated with different food preservatives as an anti-microbial denture base material

BACKGROUND/PURPOSE

The colonization of microorganisms onto denture bases is one common problem that can contribute to oral diseases. Herein, three food preservatives, including zinc oxide, potassium sorbate, and sodium metabisulfite were introduced as anti-microbial additives into a heat-polymerized poly(methyl methacrylate) (PMMA).

MATERIALS AND METHODS

Relative microbial reductions of the modified PMMA resins against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans were evaluated. The in vitro cytotoxicity of the materials was measured against mouse fibroblast L929 cells. A three-point flexural test was performed to determine a flexural strength and modulus properties of the materials.

RESULTS

The incorporation of all preservative agents into the material diminished the microbial growth of three microbial species. The PMMA resin combined with sodium metabisulfite exhibited the greatest anti-microbial activity that reduced almost all bacterial cells and about 40% of C. albicans. All modified resins showed no significant cytotoxicity against L929 cells. The addition of food preservatives did not significantly alter the flexural strength of the PMMA resin (∼84-92 MPa). However, the flexural modulus of the PMMA incorporated with food preservatives (∼2,024-2,144 MPa) was significantly lower than the unmodified PMMA.

CONCLUSION

Three food preservatives, especially sodium metabisulfite, could be applied as anti-microbial additives into the denture base resin. The PMMA incorporated with the additives did not show cytotoxicity. Although, the addition of the food preservatives altered the mechanical properties, the materials still provided acceptable flexural properties.

Comparative evaluation of three types of denture base materials with saliva substitute before and after thermocycling: An in vitro study

STATEMENT OF PROBLEM

Xerostomia refers to the decrease in the quality and quantity of saliva. In denture wearers, xerostomia affects the retention of the denture because of lack of wettability of the denture base. However, which denture base resin materials are best wetted by artificial salivary substitutes is unclear.

PURPOSE

The purpose of this in vitro study was to determine the wetting properties of 3 different commercially available denture base resin materials with artificial salivary substitute by using contact angle measurements and to compare these properties before and after thermocycling.

MATERIAL AND METHODS

A total 120 specimens were fabricated with 3 different denture base materials (n=40): heat-polymerized polymethylmethacrylate (DenTek), injection-molded nylon polyamide (Valplast), and microwave polymerized (VIPI WAVE). The advancing and receding contact angles were measured with a goniometer by using the WinDrop++ software program. The contact angle hysteresis was calculated from the advancing and receding contact angles values. The same specimens were subjected to thermocycling to measure the advancing and receding contact angles values. The comparative evaluation was carried out before and after thermocycling.

RESULTS

The mean ±standard deviation contact angles of the microwave-polymerized material were (62.40 ±1.21 degrees) advancing contact angle, (32.12 ±0.66 degrees) receding contact angle, and (30.28 ±1.40 degrees) contact angle of hysteresis. It was followed by the injection-molded nylon polyamide material, whose mean ±standard deviation contact angle values were (68.57 ±1.72 degrees) advancing contact angle, (43.02 ±1.39 degrees) receding contact angle, (26.27 ±2.05 degrees) contact angle hysteresis and high impact strength heat-polymerized polymethylmethacrylate material, whose mean ±standard deviation contact angle values were (69.81 ±0.16 degrees) advancing contact angle, (41.90 ±1.02 degrees) receding contact angle, and (27.91 ±0.97 degrees) contact angle hysteresis. The statistical analysis showed significant differences among contact angle values of the microwave-polymerized material as compared with the heat-polymerized polymethylmethacrylate and injection-molded nylon polyamide materials (P<.001).

CONCLUSIONS

The microwave-polymerized material showed better wettability with artificial saliva substitute than heat-polymerized polymethylmethacrylate and injection-molded nylon polyamide.