Biological Pretreatment Strategies for Second-Generation Lignocellulosic Resources to Enhance Biogas Production

Pre-treatment with Trichoderma viride: Towards a better understanding of its consequences for anaerobic digestion

Understanding and optimising biological pre-treatment strategies for enhanced bio-methane production is a central aspect in second-generation biofuel research. In this regard, the application of fungi for pre-treatment seems highly promising; however, understanding the mode of action is crucial. Here, we show how aerobic pre-treatment of crystalline cellulose with the cellulolytic Trichoderma viride affects substrate degradability during mesophilic, anaerobic digestion. It could be demonstrated that fungal pre-treatment resulted in a slightly reduced substrate mass. Nevertheless, no significant impact on the overall methane yield was found during batch fermentation. Short chain organic acids accumulation, thus, overall degradation dynamics including methane production kinetics were affected by the pre-treatment as shown by Gompertz modelling. Finally, 16S rRNA amplicon sequencing followed by ANCOM-BC resulted in up to 53 operative taxonomic units including fermentative, syntrophic and methanogenic taxa, whereby their relative abundances were significantly affected by fungal pre-treatment depending on the duration of the pre-treatment. The results demonstrated the impact of soft rot fungal pre-treatment of cellulose on subsequent anaerobic cellulose hydrolysis as well as on methanogenic activity. To the best of our knowledge, this is the first study to investigate the direct causal effects of pre-treatment with T. viride on basic but crucial anaerobic digestion parameters in a highly standardised approach.

Genomic analysis of a halophilic bacterium Nesterenkonia sp. CL21 with ability to produce a diverse group of lignocellulolytic enzymes

Halophilic bacteria are extremophiles that thrive in saline environment. Their ability to withstand such harsh conditions makes them an ideal choice for industrial applications such as lignocellulosic biomass degradation. In this study, a halophilic bacterium with the ability to produce extracellular cellulases and hemicellulases, designated as Nesterenkonia sp. CL21, was isolated from mangrove sediment in Tanjung Piai National Park, Malaysia. Thus far, studies on lignocellulolytic enzymes concerning bacterial species under this genus are limited. To gain a comprehensive understanding of its lignocellulose-degrading potential, the whole genome was sequenced using the Illumina NovaSeq 6000 platform. The genome of strain CL21 was assembled into 25 contigs with 3,744,449 bp and a 69.74% GC content and was predicted to contain 3,348 coding genes. Based on taxonomy analysis, strain CL21 shares 73.8 to 82.0% average nucleotide identity with its neighbouring species, below the 95% threshold, indicating its possible status as a distinct species in Nesterenkonia genus. Through in-depth genomic mining, a total of 81 carbohydrate-active enzymes were encoded. Among these, 24 encoded genes were identified to encompass diverse cellulases (GH3), xylanases (GH10, GH11, GH43, GH51, GH127 and CE4), mannanases (GH38 and GH106) and pectinases (PL1, PL9, and PL11). The production of lignocellulolytic enzymes was tested in the presence of several substrates. This study revealed that strain CL21 can produce a diverse array of enzymes which are active at different time points. By combining experimental data with genomic information, the ability of strain CL21 to produce lignocellulolytic enzymes has been elucidated, with potential applications in biorefinery industry.

A comprehensive review on anaerobic digestion with focus on potential feedstocks, limitations associated and recent advances for biogas production

With the escalating energy demand to accommodate the growing population and its needs along with the responsibility to mitigate climate change and its consequences, anaerobic digestion (AD) has become the potential approach to sustainably fulfil our demands and tackle environmental issues. Notably, a lot of attention has been drawn in recent years towards the production of biogas around the world in waste-to-energy perspective. Nevertheless, the progress of AD is hindered by several factors such as operating parameters, designing and the performance of AD reactors. Furthermore, the full potential of this approach is not fully realised yet due the dependence on people's acceptance and government policies. This article focuses on the different types of feedstocks and their biogas production potential. The feedstock selection is the basic and most important step for accessing the biogas yield. Furthermore, different stages of the AD process, design and the configuration of the biogas digester/reactors have been discussed to get better insight into process. The important aspect to talk about this process is its limitations associated which have been focused upon in detail. Biogas is considered to attain the sustainable development goals (SDG) proposed by United Nations. Therefore, the huge focus should be drawn towards its improvements to counter the limitation and makes it available to all the rural communities in developing countries and set-up the pilot scale AD plants in both developing and developed countries. In this regard, this article talks about the improvements and futures perspective related to the AD process and biogas enhancement.

Valorization of crop residues and animal wastes: Anaerobic co-digestion technology

To switch the over-reliance on fossil-based resources, curb environmental quality deterioration, and promote the use of renewable fuels, much attention has recently been directed toward the implementation of sustainable and environmentally benign 'waste-to-energy' technology exploiting a clean, inexhaustible, carbon-neutral, and renewable energy source, namely agricultural biomass. From this perspective, anaerobic co-digestion (AcoD) technology emerges as a potent and plausible approach to attain sustainable energy development, foster environmental sustainability, and, most importantly, circumvent the key challenges associated with mono-digestion. This review article provides a comprehensive overview of AcoD as a biochemical valorization pathway of crop residues and livestock manure for biogas production. Furthermore, this manuscript aims to assess the different biotic and abiotic parameters affecting co-digestion efficiency and present recent advancements in pretreatment technologies designed to enhance feedstock biodegradability and conversion rate. It can be concluded that the substantial quantities of crop residues and animal waste generated annually from agricultural practices represent valuable bioenergy resources that can contribute to meeting global targets for affordable renewable energy. Nevertheless, extensive and multidisciplinary research is needed to evolve the industrial-scale implementation of AcoD technology of livestock waste and crop residues, particularly when a pretreatment phase is included, and bridge the gap between small-scale studies and real-world applications.

Enhancing biogas generation from lignocellulosic biomass through biological pretreatment: Exploring the role of ruminant microbes and anaerobic fungi

Biogas production from Lignocellulosic Biomass (LB) via anaerobic digestion (AD) has gained attention for its potential in self-sustainability. However, the recalcitrance of LB cell walls pose a challenge to its degradability and biogas generation. Therefore, pretreatment of LB is necessary to enhance lignin removal and increase degradability. Among the different approaches, environmentally friendly biological pretreatment ispromising as it avoids the production of inhibitors. The ruminal microbial community, including anaerobic fungi, bacteria, and protozoa, has shown an ability to effectively degrade LB through biomechanical and microbial penetration of refractory cell structures. In this review, we provide an overview of ruminant microbes dominating LB's AD, their degradation mechanism, and the bioaugmentation of the rumen. We also explore the potential cultivation of anaerobic fungi from the rumen, their enzyme potential, and their role in AD. The rumen ecosystem, comprising both bacteria and fungi, plays a crucial role in enhancing AD. This comprehensive review delves into the intricacies of ruminant microorganisms' adhesion to plant cells, elucidates degradation mechanisms, and explores integrated pretreatment approaches for the effective utilization of LB, minimizing the impact of inhibitors. The discussion underscores the considerable potential of ruminant microbes in pretreating LB, paving the way for sustainable biogas production. Optimizing fungal colonization and ligninolytic enzyme production, such as manganese peroxidase and laccase, significantly enhances the efficiency of fungal pretreatment. Integrating anaerobic fungi through bioaugmentation during mainstream processing demonstrably increases methane production. This study opens promising avenues for further research and development of these microorganisms for bioenergy production.

Meso- and thermophilic posttreatment of press water coming from a thermophilic municipal solid waste digester

An efficient biogas production out of organic (waste) materials is important to contribute to a carbon-neutral future. In this study, thermophilic press water (PW) coming from an organic fraction of the municipal solid waste digester was further digested in a thermo- and mesophilic posttreatment approach using two semicontinuous 14 L digesters. The results showed that the PW can still have considerable high biogas potential-at least during the touristic high season in central Europe. The change in temperature led to an increase in volatile fatty acid concentrations and a decrease in biogas production in the mesophilic approach in the first days. However, the losses in biogas production at the beginning could be compensated thus there were no considerable differences in biogas production between thermo- and mesophilic posttreatment at the end of incubation. This can most probably be contributed to a change in the microbial community, and potentially problematic intermediates like valerate could be better degraded in the mesophilic reactor. Especially the abundance of representatives of the phylum Bacteroidota, like Fermentimonas spp., increased during mesophilic anaerobic digestion.

Optimization of biogas production from straw wastes by different pretreatments: Progress, challenges, and prospects

Lignocellulosic biomass (LCB) presents a promising feedstock for carbon management due to enormous potential for achieving carbon neutrality and delivering substantial environmental and economic benefit. Bioenergy derived from LCB accounts for about 10.3 % of the global total energy supply. The generation of bioenergy through anaerobic digestion (AD) in combination with carbon capture and storage, particularly for methane production, provides a cost-effective solution to mitigate greenhouse gas emissions, while concurrently facilitating bioenergy production and the recovery of high-value products during LCB conversion. However, the inherent recalcitrant polymer crystal structure of lignocellulose impedes the accessibility of anaerobic bacteria, necessitating lignocellulosic residue pretreatment before AD or microbial chain elongation. This paper seeks to explore recent advances in pretreatment methods for LCB biogas production, including pulsed electric field (PEF), electron beam irradiation (EBI), freezing-thawing pretreatment, microaerobic pretreatment, and nanomaterials-based pretreatment, and provide a comprehensive overview of the performance, benefits, and drawbacks of the traditional and improved treatment methods. In particular, physical-chemical pretreatment emerges as a flexible and effective option for methane production from straw wastes. The burgeoning field of nanomaterials has provoked progress in the development of artificial enzyme mimetics and enzyme immobilization techniques, compensating for the intrinsic defect of natural enzyme. However, various complex factors, such as economic effectiveness, environmental impact, and operational feasibility, influence the implementation of LCB pretreatment processes. Techno-economic analysis (TEA), life cycle assessment (LCA), and artificial intelligence technologies provide efficient means for evaluating and selecting pretreatment methods. This paper addresses current issues and development priorities for the achievement of the appropriate and sustainable utilization of LCB in light of evolving economic and environmentally friendly social development demands, thereby providing theoretical basis and technical guidance for improving LCB biogas production of AD systems.

Exploitation of lignocellulosic-based biomass biorefinery: A critical review of renewable bioresource, sustainability and economic views

Urbanization has driven the demand for fossil fuels, however, the overly exploited resource has caused severe damage on environmental pollution. Biorefining using abundant lignocellulosic biomass is an emerging strategy to replace traditional fossil fuels. Value-added lignin biomass reduces the waste pollution in the environment and provides a green path of conversion to obtain renewable resources. The technology is designed to produce biofuels, biomaterials and value-added products from lignocellulosic biomass. In the biorefinery process, the pretreatment step is required to reduce the recalcitrant structure of lignocellulose biomass and improve the enzymatic digestion. There is still a gap in the full and deep understanding of the biorefinery process including the pretreatment process, thus it is necessary to provide optimized and adapted biorefinery solutions to cope with the conversion process in different biorefineries to further provide efficiency in industrial applications. Current research progress on value-added applications of lignocellulosic biomass still stagnates at the biofuel phase, and there is a lack of comprehensive discussion of emerging potential applications. This review article explores the advantages, disadvantages and properties of pretreatment methods including physical, chemical, physico-chemical and biological pretreatment methods. Value-added bioproducts produced from lignocellulosic biomass were comprehensively evaluated in terms of encompassing biochemical products , cosmetics, pharmaceuticals, potent functional materials from cellulose and lignin, waste management alternatives, multifunctional carbon materials and eco-friendly products. This review article critically identifies research-related to sustainability of lignocellulosic biomass to promote the development of green chemistry and to facilitate the refinement of high-value, environmentally-friendly materials. In addition, to align commercialized practice of lignocellulosic biomass application towards the 21st century, this paper provides a comprehensive analysis of lignocellulosic biomass biorefining and the utilization of biorefinery green technologies is further analyzed as being considered sustainable, including having potential benefits in terms of environmental, economic and social impacts. This facilitates sustainability options for biorefinery processes by providing policy makers with intuitive evaluation and guidance.

Improving Enzymatic Saccharification of Peach Palm (Bactris gasipaes) Wastes via Biological Pretreatment with Pleurotus ostreatus

The white-rot fungus Pleurotus ostreatus was used for biological pretreatment of peach palm (Bactris gasipaes) lignocellulosic wastes. Non-treated and treated B. gasipaes inner sheaths and peel were submitted to hydrolysis using a commercial cellulase preparation from T. reesei. The amounts of total reducing sugars and glucose obtained from the 30 d-pretreated inner sheaths were seven and five times higher, respectively, than those obtained from the inner sheaths without pretreatment. No such improvement was found, however, in the pretreated B. gasipaes peels. Scanning electronic microscopy of the lignocellulosic fibers was performed to verify the structural changes caused by the biological pretreatments. Upon the biological pretreatment, the lignocellulosic structures of the inner sheaths were substantially modified, making them less ordered. The main features of the modifications were the detachment of the fibers, cell wall collapse and, in several cases, the formation of pores in the cell wall surfaces. The peel lignocellulosic fibers showed more ordered fibrils and no modification was observed after pre-treatment. In conclusion, a seven-fold increase in the enzymatic saccharification of the Bactris gasipaes inner sheath was observed after pre-treatment, while no improvement in enzymatic saccharification was observed in the B. gasipaes peel.

Effects of phenyl acids on different degradation phases during thermophilic anaerobic digestion

Aromatic compounds like phenyl acids (PA) can accumulate during anaerobic digestion (AD) of organic wastes due to an increased entry of lignocellulose, secondary plant metabolites or proteins, and thermodynamic challenges in degrading the benzene ring. The effects of aromatic compounds can be various – from being highly toxic to be stimulating for methanogenesis – depending on many parameters like inoculum or molecular characteristics of the aromatic compound. To contribute to a better understanding of the consequences of PA exposure during AD, the aim was to evaluate the effects of 10 mM PA on microbial communities degrading different, degradation phase–specific substrates in thermophilic batch reactors within 28  days: Microcrystalline cellulose (MCC, promoting hydrolytic to methanogenic microorganisms), butyrate or propionate (promoting syntrophic volatile fatty acid (VFA) oxidisers to methanogens), or acetate (promoting syntrophic acetate oxidisers to methanogens). Methane production, VFA concentrations and pH were evaluated, and microbial communities and extracellular polymeric substances (EPS) were assessed. The toxicity of PA depended on the type of substrate which in turn determined the (i) microbial diversity and composition and (ii) EPS quantity and quality. Compared with the respective controls, methane production in MCC reactors was less impaired by PA than in butyrate, propionate and acetate reactors which showed reductions in methane production of up to 93%. In contrast to the controls, acetate concentrations were high in all PA reactors at the end of incubation thus acetate was a bottle-neck intermediate in those reactors. Considerable differences in EPS quantity and quality could be found among substrates but not among PA variants of each substrate. Methanosarcina spp. was the dominant methanogen in VFA reactors without PA exposure and was inhibited when PA were present. VFA oxidisers and Methanothermobacter spp. were abundant in VFA assays with PA exposure as well as in all MCC reactors. As MCC assays showed higher methane yields, a higher microbial diversity and a higher EPS quantity and quality than VFA reactors when exposed to PA, we conclude that EPS in MCC reactors might have been beneficial for absorbing/neutralising phenyl acids and keeping (more susceptible) microorganisms shielded in granules or biofilms.

Nature-inspired pretreatment of lignocellulose - Perspective and development

As sustainability gains increasing importance in addition to cost-effectiveness as a criterion for evaluating engineering systems and practices, biological processes for lignocellulose pretreatment have attracted growing attention. Biological systems such as white and brown rot fungi and wood-consuming insects offer fascinating examples of processes and systems built by nature to effectively deconstruct plant cell walls under environmentally benign and energy-conservative environments. Research in the last decade has resulted in new knowledge that advanced the understanding of these systems, provided additional insights into these systems' functional mechanisms, and demonstrated various applications of these processes. The new knowledge and insights enable the adoption of a nature-inspired strategy aiming at developing technologies that are informed by the biological systems but superior to them by overcoming the inherent weakness of the natural systems. This review discusses the nature-inspired perspective and summarizes related advancements, including the evolution from biological systems to nature-inspired processes, the features of biological pretreatment mechanisms, the development of nature-inspired pretreatment processes, and future perspective. This work aims to highlight a different strategy in the research and development of novel lignocellulose pretreatment processes and offer some food for thought.

Closing the Nutrient Loop-The New Approaches to Recovering Biomass Minerals during the Biorefinery Processes

The recovery of plant mineral nutrients from the bio-based value chains is essential for a sustainable, circular bioeconomy, wherein resources are (re)used sustainably. The widest used approach is to recover plant nutrients on the last stage of biomass utilization processes-e.g., from ash, wastewater, or anaerobic digestate. The best approach is to recover mineral nutrients from the initial stages of biomass biorefinery, especially during biomass pre-treatments. Our paper aims to evaluate the nutrient recovery solutions from a trans-sectorial perspective, including biomass processing and the agricultural use of recovered nutrients. Several solutions integrated with the biomass pre-treatment stage, such as leaching/bioleaching, recovery from pre-treatment neoteric solvents, ionic liquids (ILs), and deep eutectic solvents (DESs) or integrated with hydrothermal treatments are discussed. Reducing mineral contents on silicon, phosphorus, and nitrogen biomass before the core biorefinery processes improves processability and yield and reduces corrosion and fouling effects. The recovered minerals are used as bio-based fertilizers or as silica-based plant biostimulants, with economic and environmental benefits.

Integrating 1G with 2G Bioethanol Production by Using Distillers’ Dried Grains with Solubles (DDGS) as the Feedstock for Lignocellulolytic Enzyme Production

First-generation (1G) bioethanol is one of the most used liquid biofuels in the transport industry. It is generated by using sugar- or starch-based feedstocks, while second-generation (2G) bioethanol is generated by using lignocellulosic feedstocks. Distillers’ dried grains with solubles (DDGS) is a byproduct of first-generation bioethanol production with a current annual production of 22.6 million tons in the USA. DDGS is rich in fiber and valuable nutrients contents, which can be used to produce lignocellulolytic enzymes such as cellulases and hemicellulases for 2G bioethanol production. However, DDGS needs a pretreatment method such as dilute acid, ammonia soaking, or steam hydrolysis to release monosaccharides and short-length oligosaccharides as fermentable sugars for use in microbial media. These fermentable sugars can then induce microbial growth and enzyme production compared to only glucose or xylose in the media. In addition, selection of one or more suitable microbial strains, which work best with the DDGS for enzyme production, is also needed. Media optimization and fermentation process optimization strategies can then be applied to find the optimum conditions for the production of cellulases and hemicellulases needed for 2G bioethanol production. Therefore, in this review, a summary of all such techniques is compiled with a special focus on recent findings obtained in previous pieces of research conducted by the authors and by others in the literature. Furthermore, a comparison of such techniques applied to other feedstocks and process improvement strategies is also provided. Overall, dilute acid pretreatment is proven to be better than other pretreatment methods, and fermentation optimization strategies can enhance enzyme production by considerable folds with a suitable feedstock such as DDGS. Future studies can be further enhanced by the technoeconomic viability of DDGS as the on-site enzyme feedstock for the manufacture of second-generation bioethanol (2G) in first-generation (1G) ethanol plants, thus bridging the two processes for the efficient production of bioethanol using corn or other starch-based lignocellulosic plants.

Effect of time and temperature of pretreatment and anaerobic co-digestion of rice straw and swine wastewater by domesticated paddy soil microbes

Rice straw and swine wastewater are abundant, easy to obtain, and inexpensive biomass materials. Anaerobic digestion of rice straw and swine wastewater effectively regulates the carbon-to-nitrogen ratio and also improves methane production efficiency. The dense lignocellulosic structure, unsuitable carbon-to-nitrogen ratio, and light texture of rice straw hinder its application in anaerobic digestion. Effective pretreatment technologies can improve degradation efficiency and methane production. Our study is the first to apply domesticated paddy soil microbes to enhance the efficiency of hydrolytic acidification of rice straw and swine wastewater at varying temperatures and times. The results show that the highest total organic carbon (1757.2 mg/L), soluble chemical oxygen demand (5341.7 mg/L), and organic acid concentration (4134.6 mg/L) appeared in the hydrolysate after five days of hydrolytic acidification at 37 °C. Moreover, the use of hydrolysate produced 13% more gas and reduced the anaerobic digestion period by ten days compared to the untreated control. This suggests that using domesticated paddy soil microbes as a pretreatment might be a sustainable and cost-effective strategy for improving the degradation efficacy and methane production from lignocellulosic materials.

An insight into the principles of lignocellulosic biomass-based zero-waste biorefineries: a green leap towards imperishable energy-based future

Lignocellulosic biomass (LCB) is an energy source that has a huge impact in today's world. The depletion of fossil fuels, increased pollution, climatic changes, etc. have led the public and private sectors to move towards sustainability i.e. using LCB for the production of biofuels and value-added compounds. A major bottleneck of the process is the recalcitrant nature of LCB. This can be overcome by using various pretreatment strategies like physical, chemical, biological, physicochemical, etc. Further, the pretreated biomass is made to undergo various steps like hydrolysis, saccharification, etc. for the conversion of value-added products and the remaining waste residues can be further utilized for the synthesis of secondary products thus favouring the zero-waste biorefinery concept. Currently, microorganisms are being explored for their use in biorefinery but the unavailability of commercial strains is a major limitation. Thus, the use of metagenomics can be used to overcome the limitation which is both cost-effective and environmentally friendly. The review deliberates the composition of LCBs, and their recalcitrance nature, followed by the structural changes caused by various pretreatment methods. The further steps in biorefineries, strategies for the development of zero-waste refineries, bottlenecks, and suggestions are also discussed. Special emphasis is given to the use of metagenomics for the discovery of microorganisms efficient for zero-waste biorefineries.

Digestibility of a Lignocellulose Supplemented Diet and Fecal Quality in Beagle Dogs

Lignocellulose (LC) might be used as a substitute fiber source for dogs as a strategy to decrease energy density and enhance gastrointestinal functionality. The objective of the present study was to compare the effects of including different levels of LC on apparent nutrient digestibility and fecal parameters (dry matter (DM), fecal score, and daily fecal output), as well as fecal fatty acid concentrations. Four diets were tested: control diet (no supplementation of LC; LC0), and three control diets diluted with increasing levels of LC: 1, 2, and 4% (LC1, LC2, and LC4). Six Beagle dogs (BW 17.1 kg ± 1.22) participated in a crossover experimental design. Before each experimental period, five days were used as a wash-out period. The fecal consistency was scored based on a 5-point scale (1 = very hard; 2 = solid, well-formed “optimum”; 3 = soft, still formed; 4 = pasty, slushy; and 5 = watery diarrhea). The results demonstrated that the organic matter apparent digestibility (p = 0.01) and nitrogen-free extract (NFE) (p < 0.01) was significantly lower for dogs fed LC4 compared to those fed LC0. Dogs fed LC2 and LC4 had a lower fecal consistency score (2.39 and 2.18, respectively; p < 0.05). The fecal DM was significantly the highest (p < 0.01), and the daily fecal output on fresh matter was lower (p < 0.05) when dogs were fed the LC4 diet compared with the LC0 diet. Including LC at 1% in the diet resulted in significantly higher fecal acidic pH levels. However, no differences among treatments were noted regarding fecal fatty acid concentrations.

A comprehensive review on anaerobic fungi applications in biofuels production

Anaerobic fungi (Neocallimastigomycota) are promising lignocellulose-degrading microorganisms that can be exploited by the biofuel industry. While natural production of ethanol by these microorganisms is very low, there is a greater potential for their use in the biogas industry. More specifically, anaerobic fungi can contribute to biogas production by either releasing holocellulose or reducing sugars from lignocelluloses that can be used as a substrate by bacteria and methanogens involved in the anaerobic digestion (AD) process or by metabolizing acetate and formate that can be directly consumed by methanogens. Despite their great potential, the appropriate tools for engineering anaerobic fungi have not been established yet. The first section of this review justifies how the biofuel industry can benefit from using anaerobic fungi and is followed by their taxonomy. In the third section, the possibility of using anaerobic fungi for the consolidated production of bioethanol is briefly discussed. Nevertheless, the main focus of this review is on the upstream and mainstream effects of bioaugmentation with anaerobic fungi on the AD process. The present review also scrutinizes the constraints on the way of efficient engineering of anaerobic rumen fungi. By providing this knowledge, this review aims to help research in this field with identifying the challenges that must be addressed by future experiments to achieve the full potentials of these promising microorganisms. To sum up, the pretreatment of lignocelluloses by anaerobic fungi can prevent carbohydrate loss due to respiration (compared to white-rot fungi). Following fungal mixed acid fermentation, the obtained slurry containing sugars and more susceptible holocellulose can be directly consumed by AD microorganisms (bacteria, methanogens). The bioaugmentation of anaerobic fungi into the AD process can increase methane biosynthesis by >3.3 times. Despite this, for the commercial AD process, novel genetic engineering techniques and kits must be developed to efficiently improve anaerobic fungi viability throughout the AD process.

Silage as a pre-treatment of orange bagasse waste to increase the potential for methane generation

Among the various methods of pre-treatment of lignocellulosic waste with the objective of optimizing the production of methane, silage stands out as a promising alternative due to its operational simplicity, low cost and effective results. In this work, the silage of orange waste (Citrus cinensis) with 14 and 21 days and its influence on the potential of methane generation was evaluated, also evaluating the impacts of silage on the kinetics of the process. Among several configurations of substrate and inoculum studied, the best configuration observed was using the ensiled residue with 21 days and granular anaerobic sludge (ENS21 + GS), reaching a methane generation potential of about 171 N mL·g^-1 VS, increasing by 119% in terms of methane generation potential without silage pre-treatment (WENS+GS), obtaining biogas with 70% in CH₄. In relation to the kinetics, the silage process drastically interfered in the kinetic behavior of the methane production, being the Cone model the one that obtained the best adjustments, among those studied, for the orange bagasse residue in the evaluated experimental conditions. Silage is an attractive alternative to increase the production of methane for lignocellulosic waste, as a pre-treatment, without significantly increasing operating costs, and it can also be associated with other sequential processes to take advantage of the maximum energy potential of lignocellulosic waste.

Biotechnological advances in biomass pretreatment for bio-renewable production through nanotechnological intervention

Globally, the fossil fuel reserves are depleting rapidly and the escalating fuel prices as well as plethora of the pollutants released from the emission of burning fossil fuels cause global warming that massively disturb the ecological balance. Moreover, the unnecessary utilization of non-renewable energy sources is a genuine hazard to nature and economic stability, which demands an alternative renewable source of energy. The lignocellulosic biomass is the pillar of renewable sources of energy. Different conventional pretreatment methods of lignocellulosic feedstocks have employed for biofuel production. However, these pretreatments are associated with disadvantages such as high cost of chemical substances, high load of organic catalysts or mechanical equipment, time consuming, and production of toxic inhibitors causing the environmental pollution. Nanotechnology has shown the promised biorefinery results by overcoming the disadvantages associated with the conventional pretreatments. Recyclability of nanomaterials offers cost effective and economically viable biorefineries processes. Lignolytic and saccharolytic enzymes have immobilized onto/into the nanomaterials for the higher biocatalyst loading due to their inherent properties of high surface area to volume ratios. Nanobiocatalyst enhance the hydrolyzing process of pretreated biomass by their high penetration into the cell wall to disintegrate the complex carbohydrates for the release of high amounts of sugars towards biofuel and various by-products production. Different nanotechnological routes provide cost-effective bioenergy production from the rich repertoires of the forest and agricultural-based lignocellulosic biomass. In this article, a critical survey of diverse biomass pretreatment methods and the nanotechnological interventions for opening up the biomass structure has been carried out.

Biogas and Biomethane Production and Usage: Technology Development, Advantages and Challenges in Europe

In line with the low-carbon strategy, the EU is expected to be climate-neutral by 2050, which would require a significant increase in renewable energy production. Produced biogas is directly used to produce electricity and heat, or it can be upgraded to reach the “renewable natural gas”, i.e., biomethane. This paper reviews the applied production technology and current state of biogas and biomethane production in Europe. Germany, UK, Italy and France are the leaders in biogas production in Europe. Biogas from AD processes is most represented in total biogas production (84%). Germany is deserving for the majority (52%) of AD biogas in the EU, while landfill gas production is well represented in the UK (43%). Biogas from sewage sludge is poorly presented by less than 5% in total biogas quantities produced in the EU. Biomethane facilities will reach a production of 32 TWh in 2020 in Europe. There are currently 18 countries producing biomethane (Germany and France with highest share). Most of the European plants use agricultural substrate (28%), while the second position refers to energy crop feedstock (25%). Sewage sludge facilities participate with 14% in the EU, mostly applied in Sweden. Membrane separation is the most used upgrading technology, applied at around 35% of biomethane plants. High energy prices today, and even higher in the future, give space for the wider acceptance of biomethane use.

Recent Developments in Lignocellulosic Biofuels, a Renewable Source of Bioenergy

Biofuel consists of non-fossil fuel derived from the organic biomass of renewable resources, including plants, animals, microorganisms, and waste. Energy derived from biofuel is known as bioenergy. The reserve of fossil fuels is now limited and continuing to decrease, while at the same time demand for energy is increasing. In order to overcome this scarcity, it is vital for human beings to transfer their dependency on fossil fuels to alternative types of fuel, including biofuels, which are effective methods of fulfilling present and future demands. The current review therefore focusses on second-generation lignocellulosic biofuels obtained from non-edible plant biomass (i.e., cellulose, lignin, hemi-celluloses, non-food material) in a more sustainable manner. The conversion of lignocellulosic feedstock is an important step during biofuel production. It is, however, important to note that, as a result of various technical restrictions, biofuel production is not presently cost efficient, thus leading to the need for improvement in the methods employed. There remain a number of challenges for the process of biofuel production, including cost effectiveness and the limitations of various technologies employed. This leads to a vital need for ongoing and enhanced research and development, to ensure market level availability of lignocellulosic biofuel.

Laccases—Versatile Enzymes Used to Reduce Environmental Pollution

The accumulation of waste and toxic compounds has become increasingly harmful to the environment and human health. In this context, the use of laccases has become a focus of interest, due to the properties of these versatile enzymes: low substrate specificity, and water formation as a non-toxic end product. Thus, we begin our study with a general overview of the importance of laccase for the environment and industry, starting with the sources of laccases (plant, bacterial and fungal laccases), the structure and mechanism of laccases, microbial biosynthesis, and the immobilization of laccases. Then, we continue with an overview of agro-waste treatment by laccases wherein we observe the importance of laccases for the biodisponibilization of substrates and the biodegradation of agro-industrial byproducts; we then show some aspects regarding the degradation of xenobiotic compounds, dyes, and pharmaceutical products. The objective of this research is to emphasize and fully investigate the effects of laccase action on the decomposition of lignocellulosic materials and on the removal of harmful compounds from soil and water, in order to provide a sustainable solution to reducing environmental pollution.

Solid-State Fermentation of Chestnut Shells and Effect of Explanatory Variables in Predictive Saccharification Models

In this study, chestnut shells (CNS), a recalcitrant and low-value agro-industrial waste obtained during the peeling of Castanea sativa fruits, were subjected to solid-state fermentation by six white-rot fungal strains (Irpex lacteus, Ganoderma resinaceum, Phlebia rufa, Bjerkandera adusta and two Trametes isolates). After being fermented, CNS was subjected to hydrolysis by a commercial enzymatic mix to evaluate the effect of fermentation in saccharification yield. After 48 h hydrolysis with 10 CMCase U mL−1 enzymatic mix, CNS fermented with both Trametes strains was recorded with higher saccharification yield (around 253 mg g−1 fermented CNS), representing 25% w/w increase in reducing sugars as compared to non-fermented controls. To clarify the relationships and general mechanisms of fungal fermentation and its impacts on substrate saccharification, the effects of some independent or explanatory variables in the production of reducing sugars were estimated by general predictive saccharification models. The variables considered were lignocellulolytic activities in fungal fermentation, CNS hydrolysis time, and concentration of enzymatic hydrolysis mix. Multiple linear regression analysis revealed a very high significant effect (p < 0.0001) of fungal laccase and xylanase activities in the saccharification models, thus proving the key potential of these enzymes in CNS solid-state fermentation.

Microbial and chemical dynamics of brewers' spent grain during a low-input pre-vermicomposting treatment

The eco-sustainability of industrial processes relies on the proper exploitation of by-products and wastes. Recently, brewers' spent grain (BSG), the main by-product of brewing, was successfully recycled through vermicomposting to produce an organic soil conditioner. However, the pre-processing step there applied (oven-drying) resulted in high costs and the suppression of microbial species beneficial for soil fertility. To overcome these limitations, a low-input pre-processing step was here applied to better exploit BSG microbiota and to make BSG suitable for vermicomposting. During 51 days of pre-treatment, the bacterial and fungal communities of BSG were monitored by denaturing gradient gel electrophoresis (DGGE). Chemical (carbon, nitrogen, ammonium, nitrate content, dissolved organic carbon) and biochemical (dehydrogenase activity) parameters were also evaluated. Mature vermicompost obtained from pre-processed BSG was characterized considering its legal requirements (e.g., absence of pathogens and mycotoxins, lack of phytotoxicity on seeds), microbiota composition, and chemical properties. Results obtained showed that throughout the pre-process, the BSG microbiota was enriched in bacterial and fungal species of significant biotechnological and agronomic potential, including lactic acid bacteria (Weissella, Pediococcus), plant growth-promoting bacteria (Bacillus, Pseudomonas, Pseudoxhantomonas), and biostimulant yeasts (Pichia fermentans, Trichoderma reesei, Beauveria bassiana). Pre-processing increased the suitability of BSG for earthworms' activity to produce high-quality mature vermicompost.

Construction of a novel microbial consortium valued for the effective degradation and detoxification of creosote-treated sawdust along with enhanced methane production

Lignocellulosic biomass represents an unlimited and ubiquitous energy source, which can effectively address current global challenges, including climate change, greenhouse gas emissions, and increased energy demand. However, lignocellulose recalcitrance hinders microbial degradation, especially in case of contaminated materials such as creosote (CRO)-treated wood, which necessitates appropriate processing in order to eliminate pollution. This study might be the first to explore a novel bacterial consortium SST-4, for decomposing birchwood sawdust, capable of concurrently degrading lignocellulose and CRO compounds. Afterwards, SST-4 which stands for molecularly identified bacterial strains Acinetobacter calcoaceticus BSW-11, Shewanella putrefaciens BSW-18, Bacillus cereus BSW-23, and Novosphingobium taihuense BSW-25 was evaluated in terms of biological sawdust pre-treatment, resulting in effective lignocellulose degradation and 100% removal of phenol and naphthalene. Subsequently, the maximum biogas production observed was 18.7 L/kg VS, while cumulative methane production was 162.8 L/kg VS, compared to 88.5 without microbial pre-treatment. The cumulative energy production from AD-I and AD-II through biomethanation was calculated as 3177.1 and 5843.6 KJ/kg, respectively. The pretreatment process exhibited a significant increase in the energy yield by 83.9%. Lastly, effective CRO detoxification was achieved with EC₅₀ values exceeding 90%, showing the potential for an integrated process of effective contaminated wood management and bioenergy production.

Agricultural Waste and Wastewater as Feedstock for Bioelectricity Generation Using Microbial Fuel Cells: Recent Advances

In recent years, there has been a significant accumulation of waste in the environment, and it is expected that this accumulation may increase in the years to come. Waste disposal has massive effects on the environment and can cause serious environmental problems. Thus, the development of a waste treatment system is of major importance. Agro-industrial wastewater and waste residues are mainly rich in organic substances, lignocellulose, hemicellulose, lignin, and they have a relatively high amount of energy. As a result, an effective agro-waste treatment system has several benefits, including energy recovery and waste stabilization. To reduce the impact of the consumption of fossil energy sources on our planet, the exploitation of renewable sources has been relaunched. All over the world, efforts have been made to recover energy from agricultural waste, considering global energy security as the final goal. To attain this objective, several technologies and recovery methods have been developed in recent years. The microbial fuel cell (MFC) is one of them. This review describes the power generation using various types of agro-industrial wastewaters and agricultural residues utilizing MFC. It also highlights the techno-economics and lifecycle assessment of MFC, its commercialization, along with challenges.

Recent advances in green solvents for lignocellulosic biomass pretreatment: Potential of choline chloride (ChCl) based solvents

Biomass wastes exhibit a great potential to be used as a source of non-depleting renewable energy and synthesis of value-added products. The key to the valorization of excess lignocellulosic biomass wastes in the world lies on the pretreatment process to recalcitrant barrier of the lignocellulosic material for the access to useful substrates. A wide range of pretreatment techniques are available and advances in this field is continuously happening, in search for cheap, effective, and environmentally friendly methods. This review starts with an introduction to conventional approaches and green solvents for pretreatment of lignocellulosic biomass. Subsequently, the mechanism of actions along with the advantages and disadvantages of pretreatment techniques were reviewed. The roles of choline chloride (ChCl) in green solvents and their potential applications were also comprehensively reviewed. The collection of ideas in this review serve as an insight for future works or interest on biomass-to-energy conversion using green solvents.

Genomic driven factors enhance biocatalyst-related cellulolysis potential in anaerobic digestion

Anaerobic digestion (AD) is a promising technology to recover bioenergy from biodegradable biomass, including cellulosic wastes. Through a few fractionation/separation techniques, cellulose has demonstrated its potential in AD, but the performance of the process is rather substrate-specific, as cellulolysis bacteria are sensitive to the enzyme-substrate interactions. Cellulosome is a self-assembled enzyme complex with many functionalized modules in the bacteria which has been gradually studied, however the genomic fingerprints of the culture-specific cellulosome in AD are relatively unclear especially under processing conditions. To clarify the key factors affecting the cellulosome induced cellulolysis, this review summarized the most recent publications of AD regarding the fates of cellulose, sources and functional genes of cellulosome, and omics methods for functional analyses. Different processes for organic treatment including applying food grinds in sewer, biomass valorization, cellulose fractionation, microaeration, and enzymatic hydrolysis enhanced fermentation, were highlighted to support the sustainable development of AD technology.

Methane production from green and woody biomass using short rotation willow genotypes for bioenergy generation

Short rotation plantations of willow genotypes, harvested in vegetative growth phases, were tested as an alternative biomass for methane production. The substrate characteristics, maximal methane yields (K) and highest methane production rates (µmax) were determined. Leaves and stems from diploid Energo (EN) and tetraploid (PP) plants, harvested in June were superior methane sources to woody tissue. This could be related to the lower lignin contents in green willow. Fermentation of pooled biomasses from tetraploid genotypes harvested in June-August was more efficient than methane production from diploid tissues. Microbial community analyses by 16S rRNA genes showed a dominance of the order Clostridiales. In field study, based on Energo plantation, the maximum in green biomass accumulation was in early month 9 of the vegetation period. A theoretical calculation showed similar or better energy potential per unit area for willow than in the case of maize silage. This study encourages the use of green willow biomass as feedstock in biomethanation processes due to its relatively low production costs and uncomplicated agricultural practice.

Bio-Delignification of Green Waste (GW) in Co-Digestion with the Organic Fraction of Municipal Solid Waste (OFMSW) to Enhance Biogas Production

The organic fraction of municipal solid waste (OFMSW) is recognized as a suitable substrate for the anaerobic digestion (AD) process and is currently considered a mature technology. A promising strategy to enhance biogas yield and productivity is the co-digestion of OFMSW with other organic biomass, such as green waste (GW), a mixture of leaves, grass, and woody materials originated from private yards and public greenspace management. The main limitation to the use of GW for biogas production is the high percentage of the lignocellulosic fraction, which makes necessary a pretreatment of delignification to dissolve the recalcitrant structure. In this study, a new strategy of sustainable bio-delignification using the white-rot fungi Bjerkandera adusta (BA) in comparison with other chemical pretreatments were investigated. Untreated and treated GW were, respectively, submitted to anaerobic co-digestion with OFMSW. AD processes were carried out in a lab-scale plant for 30 days in thermophilic conditions (55 °C). Biogas cumulative production was increased by about 100% in the case of treated GW compared with that of just OFMSW, from 145 to 289 Nm3 CH4/ton SV, and productivity almost doubled from 145 to 283 Nm3/ton FM * day. The measured average methane content values in the cumulative biogas were 55% from OFMSW and 54% from GW. Moreover, over 95% of the biogas was produced in 20 days, showing the potential opportunity to reduce the AD time.

Silage quality and biogas production from Spartina pectinata L. fermented with a novel xylan-degrading strain of Lactobacillus buchneri M B/00077

The aim of the current study was to determine the ability of the Lactobacillus buchneri M B/00077 strain to degrade xylan, its impact on the quality of silage made from the lignocellulosic biomass of Spartina pectinata L., as well as the efficiency of biogas production. In the model in vitro conditions the L. buchneri M B/00077 strain was able to grow in a medium using xylan as the sole source of carbon, and xylanolytic activity was detected in the post-culture medium. In the L. buchneri M B/00077 genome, genes encoding endo-1,4-xylanase and β-xylosidase were identified. The silages prepared using L. buchneri M B/00077 were characterized by a higher concentration of acetic and propionic acids compared to the controls or the silages prepared with the addition of commercial xylanase. The addition of bacteria increased the efficiency of biogas production. From the silages treated with L. buchneri M B/00077, 10% and 20% more biogas was obtained than from the controls and the silages treated with commercial xylanase, respectively. The results of the current study indicated the strain L. buchneri M B/00077 as being a promising candidate for further application in the field of pretreatment of lignocellulosic biomass.

Enhanced Biogas Production by Ligninolytic Strain Enterobacter hormaechei KA3 for Anaerobic Digestion of Corn Straw

Lignin-feeding insect gut is a natural ligninolytic microbial bank for the sustainable conversion of crop straw to biogas. However, limited studies have been done on highly efficient microbes. Here, an efficient ligninolytic strain Enterobacter hormaechei KA3 was isolated from the gut microbiomes of lignin-feeding Hypomeces squamosus Fabricius, and its effects on lignin degradation and anaerobic digestion were investigated. No research has been reported. Results showed that strain KA3 had better lignin-degrading ability for corn straw with a higher lignin-degrading rate (32.05%) and lignin peroxidase activity (585.2 U/L). Furthermore, the highest cumulative biogas yield (59.19 L/kg-VS) and methane yield (14.76 L/kg-VS) were obtained for KA3 inoculation, which increased by 20% and 31%, respectively, compared to CK. Higher removal rates of COD, TS, and vs. of 41.6%, 43.11%, and 66.59% were also found. Moreover, microbial community diversity increased as digestion time prolonged in TG, and bacteria were more diverse than archaea. The dominant genus taxon, for methanogens, was Methanosate in TG, while in CK was Methanosarcina. For bacteria, dominant taxa were similar for all groups, which were Solibacillus and Clostridium. Therefore, strain KA3 improved the methane conversion of the substrate. This study could provide a new microbial resource and practical application base for lignin degradation.

Recent advances on biomass-fueled microbial fuel cell

Biomass is one of the most abundant renewable energy resources on the earth, which is also considered as one of the most promising alternatives to traditional fuel energy. In recent years, microbial fuel cell (MFC) which can directly convert the chemical energy from organic compounds into electric energy has been developed. By using MFC, biomass energy could be directly harvested with the form of electricity, the most convenient, wide-spread, and clean energy. Therefore, MFC was considered as another promising way to harness the sustainable energies in biomass and added new dimension to the biomass energy industry. In this review, the pretreatment methods for biomass towards electricity harvesting with MFC, and the microorganisms utilized in biomass-fueled MFC were summarized. Further, strategies for improving the performance of biomass-fueled MFC as well as future perspectives were highlighted.

Effective pretreatment of lignocellulosic co-substrates using barley straw-adapted microbial consortia to enhanced biomethanation by anaerobic digestion

Microbial pretreatments have been identified as a compatible and sustainable process with anaerobic digestion compared to energy-intensive physicochemical pretreatments. In this study, barley straw and hay co-substrate was pretreated with a microaerobic barley straw-adapted microbial (BSAM) consortium prior to anaerobic digestion. The improved digestibility was investigated through 16S rRNA gene sequencing, microbial counts and C:N ratios. BSAM pretreatment resulted in 15.2 L kg^-1 TS of methane yield after 35 days, almost 40 times more than the control. The methane content in total biogas produced were 58% (v/v) and 10% (v/v) in BSAM and control, respectively. This research demonstrated that BSAM-based pretreatment significantly increased the digestibility and surface area of the lignocellulosic material and considerably enhanced biomethanation. This study generates new potential bio-research opportunities in the emerging field of lignocellulosic anaerobic digestion-biorefineries.

Potassium Hydroxyde Pre-Treatment Enhances Methane Yield from Giant Reed (Arundo donax L.)

The biogas production through the anaerobic digestion (AD) of giant reed (Arundo donax L.) biomass has received increasing attention. However, due to the presence of lignin, a low CH4 yield can be obtained. Aiming to improve the CH4 yield from giant reed biomass, the effectiveness of a thermo-chemical pre-treatment based on KOH was evaluated in this paper. The usefulness of a washing step before the AD was also assessed. The pre-treatment led to a specific CH4 yield up to 232 mL CH4 g−1 VS which was 21% higher than that from untreated biomass; the maximum daily rate of production was improved by 42%, AD duration was reduced by 10%, and CH4 concentration in the biogas was increased by 23%. On the contrary, the washing step did not improve the AD process. Besides, washing away the liquid fraction led to biomass losses, reducing the overall CH4 production. The use of a KOH-based pre-treatment appears as a good option for enhancing the AD of giant reed, also presenting potential environmental and agronomical benefits, like the avoidance of salty wastewater production and the likely improvement of the digestate quality, due to its enriched K content.

Anaerobic Digestion for Producing Renewable Energy-The Evolution of This Technology in a New Uncertain Scenario

Anaerobic digestion is a well-known technology with wide application in the treatment of high-strength organic wastes. The economic feasibility of this type of installation is usually attained thanks to the availability of fiscal incentives. In this review, an analysis of the different factors associated with this biological treatment and a description of alternatives available in literature for increasing performance of the process were provided. The possible integration of this process into a biorefinery as a way for producing energy and chemical products from the conversion of wastes and biomass also analyzed. The future outlook of anaerobic digestion will be closely linked to circular economy principles. Therefore, this technology should be properly integrated into any production system where energy can be recovered from organics. Digestion can play a major role in any transformation process where by-products need further stabilization or it can be the central core of any waste treatment process, modifying the current scheme by a concatenation of several activities with the aim of increasing the efficiency of the conversion. Thus, current plants dedicated to the treatment of wastewaters, animal manures, or food wastes can become specialized centers for producing bio-energy and green chemicals. However, high installation costs, feedstock dispersion and market distortions were recognized as the main parameters negatively affecting these alternatives.

Lignin intermediates lead to phenyl acid formation and microbial community shifts in meso- and thermophilic batch reactors

BACKGROUND

Lignin intermediates resulting from lignocellulose degradation have been suspected to hinder anaerobic mineralisation of organic materials to biogas. Phenyl acids like phenylacetate (PAA) are early detectable intermediates during anaerobic digestion (AD) of aromatic compounds. Studying the phenyl acid formation dynamics and concomitant microbial community shifts can help to understand the microbial interdependencies during AD of aromatic compounds and may be beneficial to counteract disturbances.

RESULTS

The length of the aliphatic side chain and chemical structure of the benzene side group(s) had an influence on the methanogenic system. PAA, phenylpropionate (PPA), and phenylbutyrate (PBA) accumulations showed that the respective lignin intermediate was degraded but that there were metabolic restrictions as the phenyl acids were not effectively processed. Metagenomic analyses confirmed that mesophilic genera like Fastidiosipila or Syntrophomonas and thermophilic genera like Lactobacillus, Bacillus, Geobacillus, and Tissierella are associated with phenyl acid formation. Acetoclastic methanogenesis was prevalent in mesophilic samples at low and medium overload conditions, whereas Methanoculleus spp. dominated at high overload conditions when methane production was restricted. In medium carbon load reactors under thermophilic conditions, syntrophic acetate oxidation (SAO)-induced hydrogenotrophic methanogenesis was the most important process despite the fact that acetoclastic methanogenesis would thermodynamically be more favourable. As acetoclastic methanogens were restricted at medium and high overload conditions, syntrophic acetate oxidising bacteria and their hydrogenotrophic partners could step in for acetate consumption.

CONCLUSIONS

PAA, PPA, and PBA were early indicators for upcoming process failures. Acetoclastic methanogens were one of the first microorganisms to be impaired by aromatic compounds, and shifts to syntrophic acetate oxidation coupled to hydrogenotrophic methanogenesis occurred in thermophilic reactors. Previously assumed associations of specific meso- and thermophilic genera with anaerobic phenyl acid formation could be confirmed.

Improvement of empty palm fruit bunches biodegradability and biogas production by integrating the straw mushroom cultivation as a pretreatment in the solid-state anaerobic digestion

Empty fruit bunches (EFB) have low biodegradability and restrict their commercial utilization in biogas plants. Integration of straw mushroom (Volvariella volvacea) cultivation as a function of bio-pretreatment on EFB to improve biodegradability and methane production by solid-state anaerobic digestion (SS-AD) was investigated. The mushroom yield was 47.3 kg·tonne^-1 EFB with remaining weight in spent mushroom-EFB (S-mEFB) of 82%. The cellulose, hemicellulose, and lignin of EFB were degraded by 3.3%, 21.3%, and 17.6%, respectively, with an increased surface area of S-mEFB. The biodegradability of S-mEFB (62.7%) was 2 times higher than raw EFB (33.5%) with the highest methane yield and production of 281 mL CH₄·g^-1 VS and 50.6 m³·tonne^-1 S-mEFB, respectively. The co-digestion of S-mEFB with 5% v/w POME had highest methane yield of 405 mL CH₄·g^-1 VS with biodegradability of 90.8%. Integrating straw mushroom cultivation with SS-AD is a promising strategy for achieving an environmentally friendly and economically feasible process.

Optimization of alkali-treated poplar fiber saccharification using metal ions and surfactants

In this study, contrary to untreated poplar fiber, processing of alkali-treated poplar fiber was optimized for the enzymatic saccharification. Considering reducing sugar content as the evaluation index, pH, temperature, time, amount of enzyme, and rotational speed of shaker were standardized to optimize the sugar production by enzymatic hydrolysis. Using response surface methodology, the optimum technological condition of enzymatic hydrolysis was found to be utilizing 43 mg cellulase at 46 °C for 50 h. At this, the sugar conversion amount of NaOH or H₂O₂-NaOH pretreated poplar was 164.62 mg/g and 218.82 mg/g respectively. It was a corresponding increase of 446.73% or 626.75% than that of poplar fiber without a pretreatment. At a low concentration, metal ions and surfactants promoted the conversion of reducing sugar. Especially, 0.01 g/L Mn²⁺ and 0.50 g/L hexadecyl trimethyl ammonium bromide (CTAB) produced the best effect and increased the conversion rate of reducing sugar by 23.62% and 21.44% respectively. Also, the effect of the combination of metal ions and surfactants was better than that of a single accelerator. By improving the enzymatic process, these findings could enhance the utilization of poplar fiber for the production of reducing sugar.

A Review of Pretreatment Methods to Enhance Solids Reduction during Anaerobic Digestion of Municipal Wastewater Sludges and the Resulting Digester Performance: Implications to Future Urban Biorefineries

The rapid increase in the population is expected to result in the approaching of design capacity for many US wastewater treatment plants (WWTPs) over the next decade. WWTPs treat both municipal and industrial wastewater influents, resulting in the production of biosolids after digestion. Biogas, a potential recovered alternative energy source, is also produced as an output from successful anaerobic digestion. More than 7M of dry tons/year of biosolids produced in the US are most often disposed in either landfills or land-applied (~80%). These options are becoming more challenging to implement due to increases in transportation costs and tipping fees, decreases in the availability of landfill/landfarm space, and most importantly, increased regulations. This situation is strongly encouraging WWTPs to find alternatives for the disposal of biosolids. Developing alternative management/disposal options for biosolids are evolving. One of the most attractive alternative option from a sustainability perspective are biorefineries (converts waste to commercial products), which are a fast-growing option given the push toward circular urban source economies (little to no waste generation). Anaerobic digestion has been widely applied in WWTPs to reduce the volume of activated sludge due to its low energy requirements, effective handling of fluctuations due to organic loading rate, relative flexibility with temperature and pH changes, and since biogas is produced that can be transformed into energy. Various pretreatment methods for waste sludges prior to digestion that have been studied to reduce solids production and increase the energetic content of the biogas are presented and discussed. Solids handling and management, which comprises ~60% of the operational cost of a WWTP, is estimated to save more than $100 M annually by achieving at least 20% reduction in the annual production of biosolids within the US. This review incorporates an assessment of various pretreatment methods to optimize the anaerobic digestion of waste sludges with a focus on maximizing both biosolids reduction and biogas quality.

Two-stage banana leaves wastes utilization towards mushroom growth and biogas production

Banana leaves wastes (BL) were subjected to fungal treatment using Pleurotus ostreatus to produce edible mushrooms and biogas in the anaerobic digestion process. Effects of fungal treatment on mushrooms production, lignin degradation, trace elements compositions and biogas yield during the anaerobic digestion process were evaluated. Treatment with P.ostreatus for 36 d resulted in the production of 181 ± 19 g of edible mushrooms per 2 kg of BL with biological efficiency of 37 ± 4%. Lignin concentration in fungal treated BL decreased by 10% indicating an improvement on its digestibility. Important trace elements (Fe, Mn, Mo, Co and Ni) necessary for the improvement of the anaerobic digestion process were also significantly reduced (P < 0.05) during the fungal treatment process. The biogas yield for the fungal treated BL was 282 mL g^-1 VS^-1 of which this study suggests that could be improved through trace element supplementation during the anaerobic digestion process.

Evaluation of a novel pretreatment of NaOH/Urea at outdoor cold-winter conditions for enhanced enzymatic conversion and hythane production from rice straw

A novel pretreatment using NaOH/Urea (NU) solution at outdoor cold-winter conditions was developed to enhance the enzymatic saccharification and hythane production from rice straw (RS). Results revealed that the reducing sugar conversion of RS reached 90.02% after NU pretreatment at outdoor freezing temperature. Chemical composition analysis showed that the lignin removal was up to 62.74% with cellulose and hemicellulose loss of 0.56% and 18.87% after 3%-6% NU pretreatment at 100% solid loading for 3 months. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis confirmed that the surface of pretreated RS exposed more cellulose and hemicellulose due to the disruption of resistant structure of lignocellulose. Subsequently, the enzymatic hydrolysate of pretreated RS was used as substrate to produce hythane by two-stage fermentation with the yield of 225.1 mL H₂/g sugar and 112.8 mL CH₄/g sugar. The energy conversion efficiency of hythane fermentation attained 10.4%, which was 22.8% and 190.5% higher than that for single H₂ and CH₄ fermentation. These results demonstrated that NU pretreatment at outdoor cold-winter conditions was practically and feasible way for improved hythane recovery from lignocellulosic biomass.

Ultrasonically-Assisted Dissolution of Sugarcane Bagasse during Dilute Acid Pretreatment: Experiments and Kinetic Modeling

Ultrasonic irradiation is known to enhance various physicochemical processes. In this work, the effect of ultrasound on the dissolution of sugarcane bagasse was studied, with the specific aims of quantifying the effect at low solids loading and mild reaction conditions, and determining whether the enhancement of dissolution by ultrasound is independent of temperature. The effects of agitation speed, reaction time, and sonication were examined on the dissolution of the biomass substrate at varying reaction temperatures during the pretreatment process. Sugarcane bagasse was mixed with a 0.3 M solution of sulfuric acid in a reaction vessel to undergo pretreatment. A kinetic model was applied to the mass dissolution of the biomass, as sonicated runs showed higher mass losses at each reaction time, compared to the non-sonicated runs. The ultrasonic enhancement in mass dissolution was seen to increase for an increase in the reaction time. It was observed that the induction period for the dissolution was eliminated by the application of ultrasound. Ultrasound was found to be more effective than temperature at enhancing mass dissolution at low solids loadings, and the effect of ultrasound was also found to be dependent on the temperature employed.

Swine manure valorization in fabrication of nutrition and energy

Renewable energy can boost the growing population's need and rapid budgetary development. To reduce fossil fuel consumption is the initial purpose of renewable and sustainable energy, producing valuable bio-based products. The fermenters, using for pretreatment of swine manure, and involvement of swine carcasses are reported to enhance organic loading rate followed by improved biogas yield on household digesters. The compositions such as animal residues, pathogenic microbes, pharmaceutical residues and nutrient compositions including undigested feed are still confused. Therefore, it is mandatory to optimize and stabilize anaerobic practice and digestate filtration purification for consequential fertilizer consumption. The effective bio-methane recovery from energy-rich compounds is challenging due to slow degradation procedures. The pretreatment procedure could enhance lipid depolymerization and improve anaerobic fermentation. This article deeply focuses on biodegradation of swine manure. The components of this manure were evaluated and established several approaches to improve biogas production. Furthermore, recycling of co-digestates was discussed in detail as fertilizer consumption including hygienic aspects of manure and pretreatment strategies of biomass residues. KEY POINTS: • Co-digestion of manure and carcasses enhance bio-methane production. • Removel of ammonia from biogas digester may improve bio-methane gas. • A strong antimicrobial influence has been reported on biogas production.

Microorganisms and Enzymes Used in the Biological Pretreatment of the Substrate to Enhance Biogas Production: A Review

The pretreatment of lignocellulosic biomass (LC biomass) prior to the anaerobic digestion (AD) process is a mandatory step to improve feedstock biodegradability and biogas production. An important potential is provided by lignocellulosic materials since lignocellulose represents a major source for biogas production, thus contributing to the environmental sustainability. The main limitation of LC biomass for use is its resistant structure. Lately, biological pretreatment (BP) gained popularity because they are eco-friendly methods that do not require chemical or energy input. A large number of bacteria and fungi possess great ability to convert high molecular weight compounds from the substrate into lower mass compounds due to the synthesis of microbial extracellular enzymes. Microbial strains isolated from various sources are used singly or in combination to break down the recalcitrant polymeric structures and thus increase biogasgeneration. Enzymatic treatment of LC biomass depends mainly on enzymes like hemicellulases and cellulases generated by microorganisms. The articles main purpose is to provide an overview regarding the enzymatic/biological pretreatment as one of the most potent techniques for enhancing biogas production.

Co-Ensiling of Wheat Straw as an Alternative Pre-Treatment to Chemical, Hydrothermal and Mechanical Methods for Methane Production

Wheat straw without pre-treatment is only converted to methane to a low degree during anaerobic digestion for fuel production due to its low hydrolysis. Current pre-treatment technologies are challenged by high expenses to energy or chemical agents. We examined the low-tech co-ensiling pre-treatment as an alternative pre-treatment of wheat straw, and compared the results with hydrothermal, chemical and mechanical pre-treatment methods. The effects of co-ensiling duration and the mixing ratio between straw and sugar beet root on the methane yields, surface morphology and chemical composition were examined. It was found that co-ensiling could improve production of methane by 34.7%, while a combined hydrothermal and chemical pre-treatment could increase the production of methane by 25.4%. The study demonstrated that the effect of co-ensiling could overlap with hydrothermal and chemical pre-treatment by having similar effects to increase lignocellulosic hydrolysis and improve methane production.

Pretreatment strategies for enhanced biogas production from lignocellulosic biomass

The inclusion of a pretreatment step in anaerobic digestion processes increases the digestibility of lignocellulosic biomass and enhances biogas yields by promoting lignin removal and the destruction of complex biomass structures. The increase in surface area enables the efficient interaction of microbes or enzymes, and a reduction in cellulose crystallinity improves the digestion process under anaerobic conditions. The pretreatment methods may vary based on the type of the lignocellulosic biomass, the nature of the subsequent process and the overall economics of the process. An improved biogas production by 1200% had been reported when ionic liquid used as pretreatment strategy for anaerobic digestion. The different pretreatment techniques used for lignocellulosic biomasses are generally grouped into physical, chemical, physicochemical, and biological methods. These four modes of pretreatment on lignocellulosic biomass and their impact on biogas production process is the major focus of this review article.