Binder-Free Centimeter-Long V2O5 Nanofibers on Carbon Cloth as Cathode Material for Zinc-Ion Batteries

Synthesis of V2O5/Single-Walled Carbon Nanotubes Integrated into Nanostructured Composites as Cathode Materials in High Performance Lithium-Ion Batteries

Vanadium pentoxide (V2O5)-anchored single-walled carbon nanotube (SWCNT) composites have been developed through a simple sol–gel process, followed by hydrothermal treatment. The resulting material is suitable for use in flexible ultra-high capacity electrode applications for lithium-ion batteries. The unique combination of V2O5 with 0.2 wt.% of SWCNT offers a highly conductive three-dimensional network. This ultimately alleviates the low lithium-ion intercalation seen in V2O5 itself and facilitates vanadium redox reactions. The integration of SWCNTs into the layered structure of V2O5 leads to a high specific capacity of 390 mAhg−1 at 0.1 C between 1.8 to 3.8 V, which is close to the theoretical capacity of V2O5 (443 mAhg−1). In recent research, most of the V2O5 with carbonaceous materials shows higher specific capacity but limited cyclability and poor rate capability. In this work, good cyclability with only 0.3% per cycle degradation during 200 cycles and enhanced rate capability of 178 mAhg−1 at 10 C have been achieved. The excellent electrochemical kinetics during lithiation/delithiation is attributed to the chemical interaction of SWCNTs entrapped between layers of the V2O5 nanostructured network. Proper dispersion of SWCNTs into the V2O5 structure, and its resulting effects, have been validated by SEM, TEM, XPS, XRD, and electrical resistivity measurements. This innovative hybrid material offers a new direction for the large-scale production of high-performance cathode materials for advanced flexible and structural battery applications.

Multiscale modulation of vanadium oxides via one-step facile reduction to synergistically boost zinc-ion battery performance

Accordion-like V10O24·12H2O was prepared via one-step reduction of commercial V2O5. Benefiting from the interlayer spacing, mixed valence, and superstructure, a superior performance was obtained for V10O24·12H2O as compared to that of V2O5.

A rapid in situ electrochemical transformation of the biphase Zn3(OH)2V2O7·2H2O/NH4V4O10 composite for high capacity and long cycling life aqueous rechargeable zinc ion batteries

The Zn3(OH)2V2O7·2H2O/NH4V4O10 nanobelts transform into Zn3V2O7(OH)2-based materials by an in situ electrochemical conversion, which act as an active cathode for high capacity aqueous zinc ion batteries.

Current advances and challenges in nanosheet-based wearable power supply devices

Nowadays, wearable devices mainly exist in the form of portable accessories with various functions, connecting various kinds of terminals like mobile phones to form various wearable systems. In a wearable system, the wearable power supply device is the key component as energy dispenser for all devices. Nanosheets, a kind of two-dimensional material, which always displays a high surface-to-volume ratio and thus is lightweight and has remarkable conductive as well as electrochemical properties, have become the optimal choice for wearable power supply devices. The development and status of nanosheet-based wearable power supply devices including nanosheet-based wearable batteries, nanosheet-based wearable supercapacitors, nanosheet-based wearable self-powered energy suppliers are introduced in this article. Besides, the future opportunities and challenges of wearable devices are discussed.

Advanced Filter Membrane Separator for Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries with low cost and inherent safety are considered to be the next-generation energy storage device. However, they suffer from poor cycling stability and low coulombic efficiency caused by the serious zinc dendrites during the cycling. In this work, a porous water-based filter membrane is first proposed as separator due to its good toughness and uniform pore distribution. The results demonstrate that the symmetrical cell using a filter membrane can cycle over 2600 h with a low voltage hysteresis of 47 mV. Moreover, an aqueous Zn//NaV₃ O₈ ·1.5H₂ O cell based on the filter membrane is constructed, which demonstrates a high capacity retention of 83.8% after 5000 cycles at 5 A g^-1 . The mechanism research results reveal that the excellent dendrites inhibiting the ability of the filter membrane should be attributed to its uniform pore distribution rather than its composition. This work proposes a filter membrane separator and reveals the great influence of separator on the zinc stripping/plating process, which will shed light on the development of high-performance aqueous zinc-ion batteries.

MnO2 Heterostructure on Carbon Nanotubes as Cathode Material for Aqueous Zinc-Ion Batteries

Due to their cost effectiveness, high safety, and eco-friendliness, zinc-ion batteries (ZIBs) are receiving much attention nowadays. In the production of rechargeable ZIBs, the cathode plays an important role. Manganese oxide (MnO2) is considered the most promising and widely investigated intercalation cathode material. Nonetheless, MnO2 cathodes are subjected to challenging issues viz. limited capacity, low rate capability and poor cycling stability. It is seen that the MnO2 heterostructure can enable long-term cycling stability in different types of energy devices. Herein, a versatile chemical method for the preparation of MnO2 heterostructure on multi-walled carbon nanotubes (MNH-CNT) is reported. Besides, the synthesized MNH-CNT is composed of δ-MnO2 and γ-MnO2. A ZIB using the MNH-CNT cathode delivers a high initial discharge capacity of 236 mAh g-1 at 400 mA g-1, 108 mAh g-1 at 1600 mA g-1 and excellent cycling stability. A pseudocapacitive behavior investigation demonstrates fast zinc ion diffusion via a diffusion-controlled process with low capacitive contribution. Overall, the MNH-CNT cathode is seen to exhibit superior electrochemical performance. This work presents new opportunities for improving the discharge capacity and cycling stability of aqueous ZIBs.

Binder-Free α-MnO2 Nanowires on Carbon Cloth as Cathode Material for Zinc-ion Batteries

Recently, rechargeable zinc-ion batteries (ZIBs) have gained a considerable amount of attention due to their high safety, low toxicity, abundance, and low cost. Traditionally, a composite manganese oxide (MnO2) and a conductive carbon having a polymeric binder are used as a positive electrode. In general, a binder is employed to bond all materials together and to prevent detachment and dissolution of the active materials. Herein, the synthesis of α-MnO2 nanowires on carbon cloth via a simple one-step hydrothermal process and its electrochemical performance, as a binder-free cathode in aqueous and nonaqueous-based ZIBs, is duly reported. Morphological and elemental analyses reveal a single crystal α-MnO2 having homogeneous nanowire morphology with preferential growth along {001}. It is significant that analysis of the electrochemical performance of the α-MnO2 nanowires demonstrates more stable capacity and superior cyclability in a dimethyl sulfoxide (DMSO) electrolyte ZIB than in an aqueous electrolyte system. This is because DMSO can prevent irreversible proton insertion as well as unfavorable dendritic zinc deposition. The application of the binder-free α-MnO2 nanowires cathode in DMSO can promote follow-up research on the high cyclability of ZIBs.