Techno-Economic Study of CO2 Capture of a Thermoelectric Plant Using Microalgae (Chlorella vulgaris) for Production of Feedstock for Bioenergy

Microalgal capture of carbon dioxide: A carbon sink or source?

The rapidly evolving global warming is triggering all levels of actions to reduce industrial carbon emissions, while capturing carbon dioxide of industrial origin via microalgae has attracted increasing attention. This article attempted to offer preliminary analysis on the carbon capture potential of microalgal cultivation. It was shown that the energy consumption-associated with operation and nutrient input could significantly contribute to indirect carbon emissions, making the microalgal capture of carbon dioxide much less effective. In fact, the current microalgae processes may not be environmentally sustainable and economically viable in the scenario where the carbon footprints of both upstream and downstream processing are considered. To address these challenging issues, renewable energy (e.g., solar energy) and cheap nutrient source (e.g., municipal wastewater) should be explored to cut off the indirect carbon emissions of microalgae cultivation, meanwhile produced microalgae, without further processing, should be ideally used as biofertilizer or aquafeeds for realizing complete nutrients recycling.

Microalgal upgrading of the fermentative biohydrogen produced from Bacillus coagulans via non-pretreated plant biomass

BACKGROUND

Hydrogen is a promising source of alternative energy. Fermentative production is more feasible because of its high hydrogen generation rate, simple operating conditions, and utilization of various organic wastes as substrates. The most significant constraint for biohydrogen production is supplying it at a low cost with fewer impurities.

RESULTS

Leaf biomass of Calotropis procera was used as a feedstock for a dark fermentative production of hydrogen by Bacillus coagulans AH1 (MN923076). The optimum operation conditions for biohydrogen production were 5.0% substrate concentrationand pH 9.0, at 35 °C. In which the biohydrogen yield was 3.231 mmol H2/g dry biomass without any pretreatments of the biomass. A freshwater microalga Oscillatroia sp was used for upgrading of the produced biohydrogen. It sequestrated 97 and 99% % of CO2 from the gas mixture when it was cultivated in BG11 and BG11-N media, respectively After upgrading process, the residual microalgal cells exhibited 0.21mg/mL of biomass yield,high content of chlorophyll-a (4.8 µg/mL) and carotenoid (11.1 µg/mL). In addition to Oscillatroia sp residual biomass showed a lipid yield (7.5-8.7%) on the tested media.

CONCLUSION

Bacillus coagulans AH1 is a promising tool for biohydrogen production avoiding the drawbacks of biomass pretreatment. Oscillatroia sp is encouraged as a potent tool for upgrading and purification of biohydrogen. These findings led to the development of a multiproduct biorefinery with zero waste that is more economically sustainable.

Environmental pollution mitigation through utilization of carbon dioxide by microalgae

Anthropogenic emissions of CO₂ have reached a critical level and the global surface temperature is expected to rise by 1.5 °C between 2030 and 2050. To ameliorate the current global warming scenario, the research community has been struggling to find more economical and innovative solutions for carbon sequestration. Among such techniques, the use of microalgal species such as Chlorella sp., Dunaliella tertiolecta, Spirulina platensis, Desmodesmus sp., and Nannochloropsis sp., among others have shown high carbon tolerance capacity (10-100%) for establishing carbon capture, utilization and storage systems. To make microalgal-based carbon capture more economical, the microalgal biomass (∼2 g/L) can be converted biofuels, pharmaceuticals and nutraceuticals through biorefinery approach with product yield in the range of 60-99.5%. Further, CRISPR-Cas9 has enabled the knockout of specific genes in microalgal species that can be used to generate low pH tolerant strains with high lipid production. Inspite of the emerging developments in pollution control by microalgae, only limited investigations are available on its economic aspects which indicate a production cost of ∼$ 0.5-15/kg microalgal biomass. This review intends to summarize the advancements in different carbon sequestration techniques while highlighting their mechanisms and major research areas that need attention for economical microalgae-based carbon sequestration.

Simulation and Economic Analysis of the Biotechnological Potential of Biomass Production from a Microalgal Consortium

The biomass of microalgae and the compounds that can be obtained from their processing are of great interest for various economic sectors. Chlorophyll from green microalgae has biotechnological applications of great potential in different industrial areas such as food, animal feed, pharmaceuticals, cosmetics, and agriculture. In this paper, the experimental, technical and economic performance of biomass production from a microalgal consortium (Scenedesmus sp., Chlorella sp., Schroderia sp., Spirulina sp., Pediastrum sp., and Chlamydomonas sp.) was investigated in three cultivation systems (phototrophic, heterotrophic and mixotrophic) in combination with the extraction of chlorophyll (a and b) on a large scale using simulation; 1 ha was established as the area for cultivation. In the laboratory-scale experimental stage, biomass and chlorophyll concentrations were determined for 12 days. In the simulation stage, two retention times in the photobioreactor were considered, which generated six case studies for the culture stage. Subsequently, a simulation proposal for the chlorophyll extraction process was evaluated. The highest microalgae biomass concentration was 2.06 g/L in heterotrophic culture, followed by mixotrophic (1.98 g/L). Phototrophic and mixotrophic cultures showed the highest chlorophyll concentrations of 20.5 µg/mL and 13.5 µg/mL, respectively. The simulation shows that higher biomass and chlorophyll production is attained when using the mixotrophic culture with 72 h of retention that we considered to evaluate chlorophyll production (a and b). The operating cost of the entire process is very high; the cultivation stage has the highest operating cost (78%), mainly due to the high energy consumption of the photobioreactors.

Microalgae-based wastewater treatment for developing economic and environmental sustainability: Current status and future prospects

Over the last several decades, concerns about climate change and pollution due to human activity has gained widespread attention. Microalgae have been proposed as a suitable biological platform to reduce carbon dioxide, a major greenhouse gas, while also creating commercial sources of high-value compounds such as medicines, cosmetics, food, feed, and biofuel. Industrialization of microalgae culture and valorization is still limited by significant challenges in scaling up the production processes due to economic constraints and productivity capacities. Therefore, a boost in resource usage efficiency is required. This enhancement not only lowers manufacturing costs but also enhancing the long-term viability of microalgae-based products. Using wastewater as a nutrient source is a great way to reduce manufacturing costs. Furthermore, water scarcity is one of the most important global challenges. In recent decades, industrialization, globalization, and population growth have all impacted freshwater resources. Moreover, high amounts of organic and inorganic toxins in the water due to the disposal of waste into rivers can have severe impacts on human and animal health. Microalgae cultures are a sustainable solution to tertiary and quaternary treatments since they have the ability to digest complex contaminants. This review presents biorefineries based on microalgae from all angles, including the potential for environmental pollution remediation as well as applications for bioenergy and value-added biomolecule production. An overview of current information about microalgae-based technology and a discussion of the associated hazards and opportunities for the bioeconomy are highlighted.

Technoeconomic Evaluation of Microalgae Oil Production: Effect of Cell Disruption Method

Microalgae have a high capacity to capture CO2. Additionally, biomass contains lipids that can be used to produce biofuels, biolubricants, and other compounds of commercial interest. This study analyzed various scenarios for microalgae lipid production by simulation. These scenarios include cultivation in raceway ponds, primary harvest with three flocculants, secondary harvest with pressure filter (and drying if necessary), and three different technologies for the cell disruption step, which facilitates lipid extraction. The impact on energy consumption and production cost was analyzed. Both energy consumption and operating cost are higher in the scenarios that consider bead milling (8.79–8.88 kWh/kg and USD 41.06–41.41/kg), followed by those that consider high-pressure homogenization (HPH, 5.39–5.46 kWh/kg and USD 34.26–34.71/kg). For the scenarios that consider pressing, the energy consumption is 5.80–5.88 kWh/kg and the operating cost is USD 27.27–27.88/kg. The consumption of CO2 in scenarios that consider pressing have a greater capture (11.23 kg of CO2/kg of lipids). Meanwhile, scenarios that consider HPH are the lowest consumers of fresh water (5.3 m3 of water/kg of lipids). This study allowed us to develop a base of multiple comparative scenarios, evaluate different aspects involved in Chlorella vulgaris lipid production, and determine the impact of various technologies in the cell disruption stage.

Carotenoid Production from Microalgae: The Portuguese Scenario

Microalgae have an outstanding capacity to efficiently produce value-added compounds. They have been inspiring researchers worldwide to develop a blue biorefinery, supporting the development of the bioeconomy, tackling the environmental crisis, and mitigating the depletion of natural resources. In this review, the characteristics of the carotenoids produced by microalgae are presented and the downstream processes developed to recover and purify them are analyzed, considering their main applications. The ongoing activities and initiatives taking place in Portugal regarding not only research, but also industrialization under the blue biorefinery concept are also discussed. The situation reported here shows that new techniques must be developed to make microalgae production more competitive. Downstream pigment purification technologies must be developed as they may have a considerable impact on the economic viability of the process. Government incentives are needed to encourage a constructive interaction between academics and businesses in order to develop a biorefinery that focuses on high-grade chemicals.

Recent Advances of Microalgae Exopolysaccharides for Application as Bioflocculants

Microalgae are used in flocculation processes because biopolymers are released into the culture medium. Microalgal cell growth under specific conditions (temperature, pH, luminosity, nutrients, and salinity) provides the production and release of exopolysaccharides (EPS). These biopolymers can be recovered from the medium for application as bioflocculants or used directly in cultivation as microalgae autoflocculants. The optimization of nutritional parameters, the control of process conditions, and the possibility of scaling up allow the production and industrial application of microalgal EPS. Therefore, this review addresses the potential use of EPS produced by microalgae in bioflocculation. The recovery, determination, and quantification techniques for these biopolymers are also addressed. Moreover, other technological applications of EPS are highlighted.

Recent advances, current issues and future prospects of bioenergy production: A review

With the immense potential of bioenergy to drive carbon neutrality and achieve the climate targets of the Paris Agreement, this paper aims to present the recent advances in bioenergy production as well as their limitations. The novelty of this review is that it covers a comprehensive range of strategies in bioenergy production and it provides the future prospects for improvement. This paper reviewed more than 200 peer-reviewed scholarly papers mainly published between 2010 and 2021. Bioenergy is derived from biomass, which, through thermochemical and biochemical processes, is converted into various forms of biofuels. This paper reveals that bioenergy production is temperature-dependent and thermochemical processes currently have the advantage of higher efficiency over biochemical processes in terms of lower response time and higher conversion. However, biochemical processes produce more volatile organic compounds and have lower energy and temperature requirements. The combination of the two processes could fill the shortcomings of a single process. The choices of feedstock are diverse as well. In the future, it can be anticipated that continuous technological development to enhance the commercial viability of different processes, as well as approaches of ensuring their sustainability, will be among the main aspects to be studied in greater detail.

Microalgae Biomass as a New Potential Source of Sustainable Green Lubricants

Lubricants are materials able to reduce friction and/or wear of any type of moving surfaces facilitating smooth operations, maintaining reliable machine functions, and reducing risks of failures while contributing to energy savings. At present, most worldwide used lubricants are derived from crude oil. However, production, usage and disposal of these lubricants have significant impact on environment and health. Hence, there is a growing pressure to reduce demand of this sort of lubricants, which has fostered development and use of green lubricants, as vegetable oil-based lubricants (biolubricants). Despite the ecological benefits of producing/using biolubricants, availability of the required raw materials and agricultural land to create a reliable chain supply is still far from being established. Recently, biomass from some microalgae species has attracted attention due to their capacity to produce high-value lipids/oils for potential lubricants production. Thus, this multidisciplinary work reviews the main chemical-physical characteristics of lubricants and the main attempts and progress on microalgae biomass production for developing oils with pertinent lubricating properties. In addition, potential microalgae strains and chemical modifications to their oils to produce lubricants for different industrial applications are identified. Finally, a guide for microalgae oil selection based on its chemical composition for specific lubricant applications is provided.

The Effect of Trophic Modes on Biomass and Lipid Production of Five Microalgal Strains

Five microalgae strains, namely Isochrysis galbana, Microchloropsis gaditana, Scenedesmus obliquus, Nannochloropsis oculata and Tetraselmis suecica, were selected as potential candidates for polyunsaturated fatty acids’ production, evaluating biomass productivity and their capacity to accumulate high lipid contents under different trophic modes. Microalgae strains were cultivated in the presence of 1% glucose using mixotrophic and heterotrophic conditions, while autotrophic cultures served as control experiments. The results demonstrate that S. obliquus performed the highest biomass productivity that reached 0.13 and 0.14 g L−1 d−1 under mixotrophic and heterotrophic conditions, respectively. I. galbana and S. obliquus utilized elevated contents of glucose in mixotrophy, removing 55.9% and 95.6% of the initial concentration of the carbohydrate, respectively, while glucose consumption by the aforementioned strains also remained high under heterotrophic cultivation. The production of lipids was maximal for I. galbana in mixotrophy and S. obliquus in heterotrophy, performing lipid productivities of 24.85 and 22.77 mg L−1 d−1, respectively. The most abundant saturated acid detected for all microalgae strains evaluated was palmitic acid (C16:0), while oleic and linolenic acids (C18:1n9c/C18:3n3) comprised the most abundant unsaturated fatty acids. I. galbana performed the highest linoleic acid (C18:2n6c) content under heterotrophic nutrition, which reached 87.9 mg g−1 of ash-free dry weight. Among the microalgae strains compared, the biomass and lipid production monitored for I. galbana and S. obliquus confirm that both strains could serve as efficient bioproducers for application in algal biorefineries.

Screening and application of Chlorella strains on biosequestration of the power plant exhaust gas evolutions of biomass growth and accumulation of toxic agents

To use microalgae for the biosequestration of carbon dioxide (CO₂) emitted from the coal-fired power plants, the screening of high CO₂ tolerant microalgae and their accumulation of toxic agents have attracted significant research attention. This study evaluated 10 Chlorella strains for high CO₂ tolerance using combined growth rates and growth periods subjected to logistic parameters. We selected LAMB 31 with high r (0.89 ± 0.10 day^-1), high k (6.51 ± 0.19), and medium Tp (5.17 ± 0.15 day) as a candidate for CO₂ biosequestration. Correspondingly, six genes involving carbon fixation and metabolism processes were upregulated in LAMB 31 under high CO₂ conditions, verifying its high CO₂ tolerant ability. LAMB 31 cultures exposed to exhaust gas of power plant under different flow rates grew well, but the high flow rate (0.6 L/h) showed inhibition effects compared with low flow rates (0.2 and 0.3 L/h) at the end of the culturing period. The toxic agents in the exhaust gas including sulfur, arsenic, and mercury accumulated in LAMB 31 biomass but were deemed safe for use in the production of both human food and animal feed based on the National Food Safety Standard in China. This study showed a complete process involving high CO₂ tolerant microalgae screening, high CO₂ tolerant verification, and in situ application in a power plant. Data results provide valuable information as the basis for future research studies in microalgae application on CO₂ mitigation at emission sources.

The Current Picture of the Transition to a Green Economy in the EU—Trends in Climate and Energy Policy versus State Security

This article presents the historical progression of changes and arguments indicating the need to move from fossil energy sources to the green economy in the European Union (EU) countries. It shows trends in the EU’s climate and energy policy compared to the rest of the world. At the same time, it points to the elements of the necessary compromise between the climate requirements and the energy security of countries and their economies. The aim of the article is to present the main quantitative challenges for the development of the green economy in the EU, which are analyzed from the perspective of the year 2030. For this year, specific values have been established to be achieved by European countries in several fundamental areas. On the other hand, the strategic goals and further development perspective are included until 2050. This undoubtedly indicates the complexity of the issue, which is intensified as a result of the various economic and political strategies of many European Union members. At the same time, as part of the analysis carried out, efforts are made to develop concepts and practical recommendations for the development of a green European economy.

Methods of Ensuring Energy Security with the Use of Hard Coal—The Case of Poland

In this article, the authors present methods based on hard coal that may ensure energy security for European Union countries. The research was carried out based on the example of Poland. The main reason for which coal is being gradually withdrawn from the energy mixes in EU countries is its negative impact on the natural environment and the health of citizens and economic factors related to domestic fuel production. The authors propose the creation of energy–chemical clusters as a solution to these problems. It is assumed that the clusters would operate following the principles of the circular economy. We also propose methods for the optimization of the production and transport costs within the cluster. Then, we conduct profitability analysis of the proposed waste management methods. At the level of the designated cluster, using network algorithms enabled us to reduce the transport costs by at least 50%. It is possible to obtain rare earth elements (REEs) worth USD 22,970 from 1 Mg of ash. At the level of the analyzed cluster, this leads to an annual profit of USD 3.5 billion. The profit related to algae production at the cluster level is approximately USD 2.5 bn.

Algae-Based Biorefinery as a Sustainable Renewable Resource

Algae are a large and diverse group of autotrophic organisms that are multicellular and single-celled and found in a variety of environments. Biofuel production and value-added chemicals produced through a sustainable process are represented by the biorefinery of algae. Algae are important because of the production of polysaccharides, lipids, pigments, proteins, and other compounds for pharmaceutical and nutritional applications. They can also be used as raw materials for biofuel production. Moreover, they are useful for wastewater treatment. All these factors have absorbed the attentions of researchers around the world. This review focuses specifically on the potentials, properties, and applications of algae as a sustainable renewable resource, which can be a good alternative to other sources due to their high biomass production, less land required for cultivation, and the production of valuable metabolites.

Co-cultivation of Streptomyces and microalgal cells as an efficient system for biodiesel production and bioflocculation formation

The phytohormone producing Streptomyces rosealbus MTTC 12,951 (S.R) and green microalga Chlorella vulgaris MSU-AGM 14 (C.V) were cultivated in co-culture system to evaluate exogenous hormonal activity. Biosynthesis of indole-3-acetic acid (IAA) and their precursors were quantitatively evaluated by employing High Performance Liquid Chromatography (HPLC). The concentration of IAA (0.72 ± 0.02 µg mL^-1) was observed to be elevated in co-cultivation system due to symbiotic interaction between Streptomyces and microalgae. In exchange, microalgae produced adequate volume of tryptophan (Trp) to induce IAA biosynthesis. The Trp stress in late exponential phase encouraged lipid accumulation (175 ± 10 mg g^-1). The bioflocculation property of microalgae ensures potential and economic viable harvesting process by reducing 148% input energy compared to conventional method. The overall results evidenced that C.V co-cultivation with S.R exhibits promotional behavior and serves as a promising cultivation process for microalgae in terms of cost efficiency and energy conservation.

Production of Microalgal Biomass in Photobioreactors as Feedstock for Bioenergy and Other Uses: A Techno-Economic Study of Harvesting Stage

The cultivation of microalgae has become a viable option to mitigate increase in CO2 in the atmosphere generated by industrial activities since they can capture CO2 as a carbon source for growth. Besides, they produce significant amounts of oils, carbohydrates, proteins, and other compounds of economic interest. There are several investigations related to the process, however, there is still no optimal scenario, since may depend on the final use of the biomass. The objective of this work was to develop a techno-economic evaluation of various technologies in harvesting and drying stages. The techno-economic estimation of these technologies provides a variety of production scenarios. Photobioreactors were used considering 1 ha as a cultivation area and a biomass production of 22.66 g/m2/day and a CO2 capture of 148.4 tons/ha/year was estimated. The production scenarios considered in this study have high energy demand and high operating costs (12.09–12.51 kWh/kg and US $210.05–214.59/kg). These results are mainly a consequence of the use of tubular photobioreactors as a biomass culture system. However, the use of photobioreactors in the production of microalgal biomass allows it to be obtained in optimal conditions for its use in the food or pharmaceutical industry.

Enhancement of nutrients removal and biomass accumulation of Chlorella vulgaris in pig manure anaerobic digestate effluent by the pretreatment of indigenous bacteria

High concentrations of pollutants in pig manure anaerobic digestate effluent (PMADE) can severely inhibit microalgal growth. In this study, two types of PMADE (PMADE-1, PMADE-2) were pretreated with indigenous bacteria which were selected from PMADE to alleviate their inhibition for the growth of Chlorella vulgaris. Indigenous bacteria could decrease 34.04% and 47.80% of total phosphorus (TP) and turbidity in PMADE-1, and 80.81%, 43.27%, and 57.51% of COD, TP, and turbidity in PMADE-2, respectively. And no significant reduction of NH₄⁺-N in both PMADE after 5 days pretreatment occurred. C. vulgaris failed to grow in unpretreated PMADE-2. Pretreatment of PMADE with indigenous bacteria could remarkably promote nutrients removal and cell growth of C. vulgaris compared to the unpretreated PMADE. The order of abiotic stress in the studied PMADE was COD > NH₄⁺-N > turbidity, and it is appropriate to pretreat the PMADE with indigenous bacteria for 2-3 days.

Review on integrated biofuel production from microalgal biomass through the outset of transesterification route: a cascade approach for sustainable bioenergy

In recent years, microalgal feedstocks have gained immense potential for sustainable biofuel production. Thermochemical, biochemical conversions and transesterification processes are employed for biofuel production. Especially, the transesterification process of lipid molecules to fatty acid alkyl esters (FAAE) is being widely employed for biodiesel production. In the case of the extractive transesterification process, biodiesel is produced from the extracted microalgal oil. Whereas In-situ (reactive) transesterification allows the direct conversion of microalgae to biodiesel avoiding the sequential steps, which subsequently reduces the production cost. Though microalgae have the highest potential to be an alternate renewable feedstock, the minimization of biofuel production cost is still a challenge. The biorefinery approaches that rely on simple cascade processes involving cost-effective technologies are the need of an hour for sustainable bioenergy production using microalgae. At the same time, combining the biorefineries for both (i) high value-low volume (food and health supplements) and (ii) low value- high volume (waste remediation, bioenergy) from microalgae involves regulatory and technical problems. Waste-remediation and algal biorefinery were extensively reviewed in many previous reports. On the other hand, this review focuses on the cascade processes for efficient utilization of microalgae for integrated bioenergy production through the transesterification. Microalgal biomass remnants after the transesterification process, comprising carbohydrates as a major component (process flow A) or the carbohydrate fraction after bio-separation of pretreated microalgae (process flow B) can be utilized for bioethanol production. Therefore, this review concentrates on the cascade flow of integrated bioprocessing methods for biodiesel and bioethanol production through the transesterification and biochemical routes. The review also sheds light on the recent combinatorial approaches of transesterification of microalgae. The applicability of spent microalgal biomass residue for biogas and other applications to bring about zero-waste residue are discussed. Furthermore, techno-economic analysis (TEA), life cycle assessment (LCA) and challenges of microalgal biorefineries are discussed.

Algae biopolymer towards sustainable circular economy

The accumulation of conventional petroleum-based polymers has increased exponentially over the years. Therefore, algae-based biopolymer has gained interest among researchers as one of the alternative approaches in achieving a sustainable circular economy around the world. The benefits of microalgae biopolymer over other feedstock is its autotrophic complex to reduce the greenhouse gases emission, rapid growing ability with flexibility in diverse environments and its ability to compost that gives greenhouse gas credits. In contrast, this review provides a comprehensive understanding of algae-based biopolymer in the evaluation of microalgae strains, bioplastic characterization and bioplastic blending technologies. The future prospects and challenges on the algae circular bioeconomy which includes the challenges faced in circular economy, issues regard to the scale-up and operating cost of microalgae cultivation and the life cycle assessment on algal-based biopolymer were highlighted. The aim of this review is to provide insights of algae-based biopolymer towards a sustainable circular bioeconomy.

Management of the Energy Mix and Emissivity of Individual Economies in the European Union as a Challenge of the Modern World Climate

The aim of the article is to present the most important elements to be implemented in the European Union energy policy in the 2030 perspective in the context of sustainable development of the Member States. The solution to the too high emissivity of individual economies in the European Union is the energy mix, which will establish a compromise in the so-called the triad of EU policy goals. This is undoubtedly a current climate challenge for the modern world, which also has a direct impact on the economic situation of EU countries. The basis of the presented considerations and recommendations is a literature review on the subject and a statistical analysis of empirical data of the largest statistical organizations in the EU and the world. The starting point for the analysis is the assessment of the state of the energy sector in the EU. Therefore, the goals and tasks until 2030 result from many conditions of the energy sector. The article provides recommendations for the EU on future climate and energy policy, analysing the practices of member countries empirical and data compiled by the world’s largest organizations and institutions, such as the International Atomic Energy Agency (IAEA), the World Nuclear Association (WNA), Eurostat, and the International Energy Agency (IEA). The strategic goals of the EU climate and energy policy presented in the study show the necessary challenges for the implementation of sustainable development in the analyzed sector, which is the driving force of world economies. The conclusions were presented in accordance with the current economic efficiency of various energy sources and the necessity to seek a compromise among the so-called a triad of goals defined in EU policy.

An Empirical Study on Greenhouse Gas Emission Calculations Under Different Municipal Solid Waste Management Strategies

The Chinese government is committed to ensuring separation of municipal solid waste (MSW), promoting the integrated development of the MSW management system with the renewable resource recovery system, and achieving construction of ecological civilization. Guided by the methods in Intergovernmental Panel on Climate Change (IPCC) guidelines, the greenhouse gas (GHG) emissions under five waste disposal scenarios in Beijing under the life cycle framework were assessed in this research. The study included collection and transportation, as well as three end disposal methods (sanitary landfill, incineration, and composting), and the emission reduction benefits of electricity generation from incineration and recycling of renewable resources were taken into account. The results show that an emission reduction benefit of 70.82% could be achieved under Scenario 5 in which kitchen waste and recyclables are sorted and recycled and the residue is incinerated, and the selection of the optimal strategy was not affected by changes in the separation rate. In addition, landfill would emit more GHG than incineration and composting. The results of this study are helpful for the government to make a decision on MSW management considering the goal of GHG emission reduction.