Sustainable Anodes for Lithium- and Sodium-Ion Batteries Based on Coffee Ground-Derived Hard Carbon and Green Binders

Electrolytes for Sodium Ion Batteries: The Current Transition from Liquid to Solid and Hybrid systems

Sodium-ion batteries (NIBs) have recently garnered significant interest in being employed alongside conventional lithium-ion batteries, particularly in applications where cost and sustainability are particularly relevant. The rapid progress in NIBs will undoubtedly expedite the commercialization process. In this regard, tailoring and designing electrolyte formulation is a top priority, as they profoundly influence the overall electrochemical performance and thermal, mechanical, and dimensional stability. Moreover, electrolytes play a critical role in determining the system's safety level and overall lifespan. This review delves into recent electrolyte advancements from liquid (organic and ionic liquid) to solid and quasi-solid electrolyte (dry, hybrid, and single ion conducting electrolyte) for NIBs, encompassing comprehensive strategies for electrolyte design across various materials, systems, and their functional applications. The objective is to offer strategic direction for the systematic production of safe electrolytes and to investigate the potential applications of these designs in real-world scenarios while thoroughly assessing the current obstacles and forthcoming prospects within this rapidly evolving field.

Carbons Derived from Regenerated Spherical Cellulose as Anodes for Li-Ion Batteries at Elevated Temperatures

Biomass-based materials have emerged as a promising alternative to the conventional graphite anode in Li-ion batteries due to their renewability, low cost, and environmental friendliness. Therefore, a facile synthesis method for porous hard carbons based on cellulose acetate microspheres and bead cellulose is used, and their application as anode materials in Li-ion batteries is discussed. The resulting porous carbons exhibit promising electrochemical characteristics, including a reversible capacity of about 300 mAh g-1 at 0.1 C (37 mA g-1) after 50 cycles, and stable capacities up to 210 mAh g-1 over 1000 cycles at 1 C (372 mA g-1) in half-cells for cellulose acetate microspheres carbonised at 1200 °C. Moreover, at 60 °C cellulose-derived carbons show higher specific capacities than graphite (300 mAh g-1 vs 240 mAh g-1 at 1 C after 500 cycles), indicating their potential for use in high-temperature applications. The different charge storage mechanisms of the prepared hard carbon materials and graphite are observed. While capacity of graphite is mainly controlled by the Faradaic redox process, the cellulose-derived carbons combine Faradaic intercalation and capacitive charge adsorption.

The Beneficial Impact of Mineral Content in Spent-Coffee-Ground-Derived Hard Carbon on Sodium-Ion Storage

The key technological implementation of sodium-ion batteries is converting biomass-derived hard carbons into effective anode materials. This becomes feasible if appropriate knowledge of the relations between the structure of carbonized biomass products, the mineral ash content in them, and Na storage properties is gained. In this study, we examine the simultaneous impact of the ash phase composition and carbon structure on the Na storage properties of hard carbons derived from spent coffee grounds (SCGs). The carbon structure is modified using the pre-carbonization of SCGs at 750 °C, followed by annealing at 1100 °C in an Ar atmosphere. Two variants of the pre-carbonization procedure are adopted: the pre-carbonization of SCGs in a fixed bed and CO2 flow. For the sake of comparison, the pre-carbonized products are chemically treated to remove the ash content. The Na storage performance of SCG-derived carbons is examined in model two and three Na-ion cells. It was found that ash-containing carbons outperformed the ash-free analogs with respect to cycling stability, Coulombic efficiency, and rate capability. The enhanced performance is explained in terms of the modification of the carbon surface by ash phases (mainly albite) and its interaction with the electrolyte, which is monitored by ex situ XPS.

Evaluation of Electronic-Ionic Transport Properties of a Mg/Zr-Modified LiNi0.5Mn1.5O4 Cathode for Li-Ion Batteries

There is an enormous drive for moving toward cathode material research in LIBs due to the proposal of zero-emission electric vehicles together with the restriction of cathode materials in design. LiNi0.5Mn1.5O4 (LNMO) attracts great research interests as high-voltage Co-free cathodes in LIBs. However, a more extensive study is required for LNMO due to its poor electrochemical performance, especially at high temperature, because of the instability of the LNMO interface. Herein, we design structural modifications using Mg and Zr to alleviate the above-mentioned drawbacks by limiting Mn dissolution and tailoring interstitial sites (which are shown by structural and electrochemical characterizations). This strategy enhances the cycle life up to 1000 cycles at both 25 and 50 °C. In addition, a thorough characterization by impedance spectroscopy is applied to give an insight into the electronic and ionic transport properties and the intricate phase transitions occurring upon oxidation and reduction.

Aqueous Supramolecular Binder for High-Performance Lithium-Sulfur Batteries

Developing an advanced electrode structure is highly important for obtaining lithium sulfur (Li-S) batteries with long life, low cost, and environmental friendliness. Some bottlenecks, such as large volume deformation and environmental pollution caused by the electrode preparation process, are still hindering the practical application of Li-S batteries. In this work, a new water-soluble, green, and environmentally friendly supramolecular binder (HUG) is successfully synthesized by modifying natural biopolymer (guar gum, GG) with HDI-UPy (cyanate containing pyrimidine groups). HUG can effectively resist electrode bulk deformation through a the unique three-dimensional nanonet-structure formed via covalent bonds and multiple hydrogen bonds. In addition, abundant polar groups of HUG have good adsorption properties for polysulfide and can inhibit the shuttle movement of polysulfide ions. Therefore, Li-S cell with HUG exhibits a high reversible capacity of 640 mAh g^-1 after 200 cycles at 1C with a Coulombic efficiency of 99%.

Semi-wet methanogen cathode composed of oak white charcoal for developing sustainable microbial fuel cells

The present study aimed to evaluate a semi-wet biocathode composed of oak white charcoal and agarose gel as an alternative to the standard carbon felt biocathodes used in microbial fuel cells (MFCs). The MFC containing the oak white charcoal cathode (Oak-MFC) recorded a higher current value than that of the MFC containing a carbon felt cathode (CF-MFC). The Oak-MFC produced approximately 4.0-fold more electrons in the external circuit and 1.7-fold more methane (CH₄) than the CF-MFC. A real-time PCR targeting mcrA showed that the number of methanogens adhering to the oak white charcoal cathode was approximately 15-fold that adhering to the carbon felt cathode. These results suggest that the methanogens attached to the cathode of both MFCs received electrons and CH₄ was produced from carbon dioxide (CO₂). Furthermore, Oak-MFC performed better than CF-MFC, thereby suggesting that oak white charcoal bound by agarose gel can be used as an alternative methanogen cathode. The propionic acid degradation rate of Oak-MFC was faster than that of CF-MFC suggesting that the cathodic reaction may affect the anodic reaction. The use of oak-derived electrode as a methanogen cathode also could contribute to sustainable forest management and promote regular thinning of oak trees. Further, its use will enable carbon fixation and efficient energy conversion from CO₂ to CH₄, thus contributing to sustainable energy use.

Structural and Interfacial Characterization of a Sustainable Si/Hard Carbon Composite Anode for Lithium-Ion Batteries

The effects of a biomass-derived hard carbon matrix and a sustainable cross-linked binder are investigated as electrode components for a silicon-based anode in lithium-ion half-cells, in order to reduce the capacity fade due to volume expansion and shrinkage upon cycling. Ex situ Raman spectroscopy and impedance spectroscopy are used to deeply investigate the structural and interfacial properties of the material within a single cycle and upon cycling. An effective buffering of the volume changes of the composite electrode is evidenced, even at a high Si content up to 30% in the formulation, resulting in the retention of structural and interfacial integrity. As a result, a high capacity performance and a very good rate capability are displayed even at high current densities, with a stable cycling behavior and low polarization effects.

Unveiling the Electrochemical Mechanism of High-Capacity Negative Electrode Model-System BiFeO3 in Sodium-Ion Batteries: An In Operando XAS Investigation

Careful development and optimization of negative electrode (anode) materials for Na-ion batteries (SIBs) are essential, for their widespread applications requiring a long-term cycling stability. BiFeO₃ (BFO) with a LiNbO₃-type structure (space group R3c) is an ideal negative electrode model system as it delivers a high specific capacity (770 mAh g^-1), which is proposed through a conversion and alloying mechanism. In this work, BFO is synthesized via a sol-gel method and investigated as a conversion-type anode model-system for sodium-ion half-cells. As there is a difference in the first and second cycle profiles in the cyclic voltammogram, the operating mechanism of charge-discharge is elucidated using in operando X-ray absorption spectroscopy. In the first discharge, Bi is found to contribute toward the electrochemical activity through a conversion mechanism (Bi³⁺ → Bi⁰), followed by the formation of Na-Bi intermetallic compounds. Evidence for involvement of Fe in the charge storage mechanism through conversion of the oxide (Fe³⁺) form to metallic Fe and back during discharging/charging is also obtained, which is absent in previous literature reports. Reversible dealloying and subsequent oxidation of Bi and oxidation of Fe are observed in the following charge cycle. In the second discharge cycle, a reduction of Bi and Fe oxides is observed. Changes in the oxidation states of Bi and Fe, and the local coordination changes during electrochemical cycling are discussed in detail. Furthermore, the optimization of cycling stability of BFO is carried out by varying binders and electrolyte compositions. Based on that, electrodes prepared with the Na-carboxymethyl cellulose (CMC) binder are chosen for optimization of the electrolyte composition. BFO-CMC electrodes exhibit the best electrochemical performance in electrolytes containing fluoroethylene carbonate (FEC) as the additive. BFO-CMC electrodes deliver initial capacity values of 635 and 453 mAh g^-1 in the Na-insertion (discharge) and deinsertion (charge) processes, respectively, in the electrolyte composition of 1 M NaPF₆ in EC/DEC (1:1, v/v) with a 2% FEC additive. The capacity values stabilize around 10th cycle and capacity retention of 73% is observed after 60 cycles with respect to the 10th cycle charge capacity.

Enhanced Electrochemical Properties of Na0.67MnO2 Cathode for Na-Ion Batteries Prepared with Novel Tetrabutylammonium Alginate Binder

Both the binder and solid–electrolyte interface play an important role in improving the cycling stability of electrodes for Na-ion batteries. In this study, a novel tetrabutylammonium (TBA) alginate binder is used to prepare a Na0.67MnO2 electrode for sodium-ion batteries with improved electrochemical performance. The ageing of the electrodes is characterized. TBA alginate-based electrodes are compared to polyvinylidene fluoride- (PVDF) and Na alginate-based electrodes and show favorable electrochemical performance, with gravimetric capacity values of up to 164 mAh/g, which is 6% higher than measured for the electrode prepared with PVDF binder. TBA alginate-based electrodes also display good rate capability and improved cyclability. The solid–electrolyte interface of TBA alginate-based electrodes is similar to that of PVDF-based electrodes. As the only salt of alginic acid soluble in non-aqueous solvents, TBA alginate emerges as a good alternative to PVDF binder in battery applications where the water-based processing of electrode slurries is not feasible, such as the demonstrated case with Na0.67MnO2.

Do eco-friendly binders affect the electrochemical performance of MOF@CNT anodes in lithium-ion batteries?

We substituted an organic-based binder with a natural water-soluble binder (CMC) in the anode of a lithium-ion battery.

Sustainable Materials from Fish Industry Waste for Electrochemical Energy Systems

Fish industry waste is attracting growing interest for the production of environmentally friendly materials for several different applications, due to the potential for reduced environmental impact and increased socioeconomic benefits. Recently, the application of fish industry waste for the synthesis of value-added materials and energy storage systems represents a feasible route to strengthen the overall sustainability of energy storage product lines. This review focused on an in-depth outlook on the advances in fish byproduct-derived materials for energy storage devices, including lithium-ion batteries (LIBs), sodium-ion (NIBs) batteries, lithium-sulfur batteries (LSBs), supercapacitors and protein batteries. For each of these, the latest applications were presented together with approaches to improve the electrochemical performance of the obtained materials. By analyzing the recent literature on this topic, this review aimed to contribute to further advances in the sustainability of energy storage devices.

Applications of Carbon in Rechargeable Electrochemical Power Sources: A Review

Rechargeable power sources are an essential element of large-scale energy systems based on renewable energy sources. One of the major challenges in rechargeable battery research is the development of electrode materials with good performance and low cost. Carbon-based materials have a wide range of properties, high electrical conductivity, and overall stability during cycling, making them suitable materials for batteries, including stationary and large-scale systems. This review summarizes the latest progress on materials based on elemental carbon for modern rechargeable electrochemical power sources, such as commonly used lead–acid and lithium-ion batteries. Use of carbon in promising technologies (lithium–sulfur, sodium-ion batteries, and supercapacitors) is also described. Carbon is a key element leading to more efficient energy storage in these power sources. The applications, modifications, possible bio-sources, and basic properties of carbon materials, as well as recent developments, are described in detail. Carbon materials presented in the review include nanomaterials (e.g., nanotubes, graphene) and composite materials with metals and their compounds.