Applications of Carbon in Rechargeable Electrochemical Power Sources: A Review

Visualization of Electrolyte Reaction Field Near the Negative Electrode of a Lead Acid Battery by Means of Amplitude/Frequency Modulation Atomic Force Microscopy

The precise observation of a solid-liquid interface by means of frequency modulation atomic force microscopy (FM-AFM) was performed, demonstrating its applicability to a study on lead acid batteries using an electrochemical test cell for in-liquid FM-AFM embedded with a specialized cantilever holder. The consistency and reproducibility of each surface profile observed via amplitude modulation AFM and FM-AFM were verified properly in a strong acidic electrolyte. In terms of FM-AFM, the ability to observe remarkable changes in the force mapping is the most beneficial, especially near the negative electrode surface. The localization of lignosulfonate (LS) added into the electrolyte as an expander could be visualized since this characteristic force mapping was captured when LS was added to electrolyte.

Deciphering the Interplay between Binders and Electrolytes on the Performance of Li4Ti5O12 Electrodes for Li-Ion Batteries

Lithium titanium oxide (Li4Ti5O12, LTO) is an attractive negative electrode for the development of safe—next-generation—lithium-ion batteries (LIBs). LTO can find specific applications complementary to existing alternatives for LIBs thanks to its good rate capability at high C-rates, fast lithium intercalation, and high cycling stability. Furthermore, LIBs featuring LTO electrodes are inherently safer owing to the LTO’s operating potential of 1.55 V vs. Li+/Li where the commonly used organic-based electrolytes are thermodynamically stable. Herein, we report the combined use of water-soluble sodium alginate (SA) binder and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-tetraglyme (1m-T) electrolyte and we demonstrate the improvement of the electrochemical performance of LTO-based electrodes with respect to those operating in conventional electrolyte 1M LiPF6-ethylene carbonate: dimethyl carbonate (LP30). We also tackle the analysis of the impact of combining the binder/electrolyte on the long-term cycling performance of LTO electrodes featuring SA or conventional polyvinylidene fluoride (PVdF) as binders. Therefore, to assess the impact of the combination of binder/electrolyte on performance, we performed post-mortem characterization by ex situ synchrotron diffraction experiments of LTO electrodes after cycling in LP30 and 1m-T electrolytes.

Effects of LiBF4 Addition on the Lithium-Ion Conductivity of LiBH4

Complex hydrides, such as LiBH₄, are a promising class of ion conductors for all-solid-state batteries, but their application is constrained by low ion mobility at room temperature. Mixing with halides or complex hydride anions, i.e., other complex hydrides, is an effective approach to improving the ionic conductivity. In the present study, we report on the reaction of LiBH₄ with LiBF₄, resulting in the formation of conductive composites consisting of LiBH₄, LiF and lithium closo-borates. It is believed that the in-situ formation of closo-borate related species gives rise to highly conductive interfaces in the decomposed LiBH₄ matrix. As a result, the ionic conductivity is improved by orders of magnitude with respect to the Li-ion conductivity of the LiBH₄, up to 0.9 × 10⁻⁵ S cm⁻¹ at 30 °C. The insights gained in this work show that the incorporation of a second compound is a versatile method to improve the ionic conductivity of complex metal hydrides, opening novel synthesis pathways not limited to conventional substituents.

Sustainable Materials from Fish Industry Waste for Electrochemical Energy Systems

Fish industry waste is attracting growing interest for the production of environmentally friendly materials for several different applications, due to the potential for reduced environmental impact and increased socioeconomic benefits. Recently, the application of fish industry waste for the synthesis of value-added materials and energy storage systems represents a feasible route to strengthen the overall sustainability of energy storage product lines. This review focused on an in-depth outlook on the advances in fish byproduct-derived materials for energy storage devices, including lithium-ion batteries (LIBs), sodium-ion (NIBs) batteries, lithium-sulfur batteries (LSBs), supercapacitors and protein batteries. For each of these, the latest applications were presented together with approaches to improve the electrochemical performance of the obtained materials. By analyzing the recent literature on this topic, this review aimed to contribute to further advances in the sustainability of energy storage devices.

Coconut Shell-Derived Activated Carbon for High-Performance Solid-State Supercapacitors

Coconut shells, low-cost and renewable agro-wastes, were used as a starting material in the synthesis of hierarchical activated carbons via hydrothermal, KOH-activation, and carbonization techniques. The ratio of KOH to hydrochar was varied in a systemic manner to study how it influences the texture and electrochemical behavior of the capacitor. Coconut shell-based carbon coated on nickel foams presented a surface area of 1567 m2 g−1, with micropores as well as mesopores widely distributed. The sample showed superior electrochemical performance, attaining 449 F g−1 at 1 A g−1 in 6 M LiNO3 aqueous solution. The solid-state symmetric supercapacitor device delivered a specific capacitance of 88 F g−1 at 1 A g−1 and a high energy density of 48.9 Whkg−1 at a power density of 1 kW kg−1. At a wide voltage window of 2.0 V, the sample was highly stable during the cycle test, showing a 92% capacitance retention at 2 A g−1 after cycling for 5000 times. The superior performance is due to the sample possessing great BET surface area, a good distribution of pores, and the usage of a suitable electrolyte. This facilitates an electrical double layer that can be deployed for applications to store energy.

Preparation of Lignin Carbon/Zinc Oxide Electrode Material and Its Application in Supercapacitors

In this paper, carbon/zinc oxide (LC/ZnO) composites were successfully synthesized and characterized by X-ray powder diffraction, field emission scanning electron microscopy, Fourier transform infrared spectroscopy, Raman, thermogravimetry, and N₂ adsorption-desorption, and tested by electrochemical performance. Studies have shown that the morphology of LC/ZnO composites is that lignin pellets are embedded in ZnO microplates. The lignin carbon in the composites mainly exists in an amorphous structure, and the specific surface area and pore channels of metal oxides are increased by the presence of lignin carbon. The electrochemical performance test shows that the carbonization temperature of LC/ZnO with the highest specific capacitance is 550 °C, and the capacitance retention rate reaches 96.74% after 1000 cycles of testing, indicating that the composite material has good cycle stability. Compared with the control group, it is found that the specific capacitance of LC/ZnO-550 °C is 2.3 times and 1.8 times that of ZnO-550 °C and LC-550 °C, respectively. This shows that during the electrochemical test, the lignin carbon and the metal oxide promote each other and act synergistically. In addition, the composite material exhibits the characteristics of a pseudo-capacitance capacitor, indicating that the redox reaction occurred in the electrochemical performance test.