Bio-Char Characterization Produced from Walnut Shell Biomass through Slow Pyrolysis: Sustainable for Soil Amendment and an Alternate Bio-Fuel

An analysis of the textural properties of activated carbons obtained from biomass via the LBET, NLDFT and QSDFT methods

This article presents the unique research results of the comprehensive analysis of the porous structure of activated carbons obtained from biomass waste materials from the wood industry during activation in an air atmosphere. The porous structure was analysed on the basis of nitrogen and argon adsorption isotherms via complementary multi-method analysis, i.e. the new numerical clustering-based adsorption analysis, the non-local density functional theory and the quenched solid density functional theory methods. The analytical results for the prepared activated carbons were compared with analogous results obtained for commercial activated carbon. On the basis of the conducted studies it has been determined that the new numerical clustering-based adsorption analysis method gives credible and valuable information on the textural properties of activated carbons which are in strict correlation and mutually complement with the results of the analysis with the use of the quenched solid density functional theory method. The research results obtained in this paper, it has also been shown that from waste materials of the wood industry, in a relatively cheap and cleaner production process, it is possible not only to obtain carbonaceous materials almost comparable to commercial activated carbon, but also to manage the waste in accordance with the principles of a closed-loop economy and sustainable development. The paper pays also attention to the often overlooked economic and ecological aspects, which should nevertheless be taken into account when comparing different adsorbents, rather than their textural properties alone.

Furfural as a low-volume, high-value asset from agricultural residues: A review on production, agricultural applications and environmental sustainability

This comprehensive review explores furfural production from agricultural residues, focusing on its significance as a low-volume, high-value asset crucial for environmental sustainability. It covers diverse production technologies, recent advancements, and applications in agriculture, evaluating furfural's potential to enhance crop resilience and yield. Showing its role in a circular economy, the review discusses how furfural can replace conventional petrochemical processes, thereby reducing environmental impact. Case studies, such as successful implementations with cotton biomass byproducts, illustrate furfural's practical applications and environmental benefits. The study underscores the need for ongoing research, supportive policies, and furfural's growing role in sustainable agriculture and industry. It is focused on furfural's essential contribution to promoting environmental stewardship and sustainable practices. By examining furfural's role as a value-added product from agricultural residues, this review provides insights into its economic viability and potential challenges.

Adsorption characteristics of S-Metolachlor onto the sawdust biochar derived from Acacia auriculiformis

The adsorption mechanism of S-Metolachlor in an aqueous solution by sawdust biochar derived from Acacia auriculiformis (SAB) was studied. SAB was manufactured at 500 °C for 4 h under oxygen-limited conditions and characterized for SEM, EDS, pHpzc, BET, and FTIR. The adsorption kinetics, isotherm, and diffusion studies of S-Metolachlor and SAB were further explored. Moreover, the effects of the solution pH were examined on the adsorption of S-Metolachlor by SAB. The BET analysis of SAB was achieved at 106.74 m2.g-1 and the solution pH did not significantly influence the S-Metolachlor adsorption. The adsorption data were fitted into a Langmuir isotherm and the PSO model. The film diffusion coefficient Df (4.93 × 10-11 to 8.17 × 10-11 m2.s-1) and the particle diffusion coefficient Dp (1.68 × 10-11 to 2.65 × 10-11 m2.s-1) were determined and the rate-limiting step of S-Metolachlor adsorption and SAB was governed by liquid film diffusion. The S-Metolachlor adsorption process onto SAB was controlled by multiple mechanisms, including pore filling, H-bonding, hydrophobic interaction, and π-π EDA interactions. H-bonding is the main interaction for the adsorption of S-Metolachlor and SAB. Conclusively, the study illustrates that biochar produced from Acacia auriculiformis sawdust possessed effective adsorption properties for S-Metolachlor herbicide.

Effect of synthesis conditions on the porous texture of activated carbons obtained from Tara Rubber by FeCl3 activation

This paper presents the results of an unique analysis of the influence of the mass ratio of activator FeCl3 to precursor and the temperature of the activation process on the formation of the porous structure of activated carbons obtained from Tara Rubber by FeCl3 activation. The study used the new numerical clustering based adsorption analysis method and the quenched solid density functional theory, taking into account, among other things, the heterogeneity of the analysed surface which is a new approach rarely used in the analysis of the porous structure of adsorbents. On the basis of the calculation results, it was concluded that the activated carbon with the most developed porous texture was obtained at a mass ratio (FeCl3:Tara Rubber) of 2, at an activation process temperature of 800 °C. This activated carbon is also characterised by the lowest degree of surface heterogeneity and at the same time, however, the widest range of micropores compared to activated carbons obtained at other mass ratios. The analyses carried out further demonstrated the valuable and complementary information obtained from the structure analysis methods and their high utility in practical applications, especially in the development of new industrial technologies for the production of adsorbents and the selection of optimal conditions for their production.

Numerical analysis of the porous structure of spherical activated carbons obtained from ion-exchange resins

This paper presents the results of an analysis of the porous structure of spherical activated carbons obtained from cation-exchange resin beads subjected to ion exchange prior to activation. The study investigated the effects of the type of cation exchange resin, the concentration of potassium cations in the resin beads and the temperature of the activation process on the adsorption properties of the resulting spherical activated carbons. The numerical clustering-based adsorption analysis method and the quenched solid density functional theory were used to analyse the porous structure of spherical activated carbons. Based on original calculations and unique analyses, complex relationships between preparation conditions and the porous structure properties of the obtained spherical activated carbons were demonstrated. The results of the study indicated the need for simultaneous analyses using advanced methods for the analysis of porous structures, i.e., the numerical clustering-based adsorption analysis method and the quenched solid density functional theory. This approach allows a reliable and precise determination of the adsorption properties of the materials analysed, including, among other things, surface heterogeneities, and thus an appropriate selection of production conditions to obtain materials with the expected adsorption properties required for a given industrial process.

Mitigation of salinity stress effects on kochia (Bassia scoparia L.) biomass productivity using biochar application

Salinity continues to be a key factor limiting food security and agricultural sustainability in arid and semi-arid countries. Biochar has been promoted to reduce the risk of saline irrigation. In a controlled study, physiological and morphological growth factors of kochia plants that were irrigated with tap water (S1) and saline water (S2) were assessed to identify the ameliorative effects of biochar amendment to the soil at different levels (B1: 0%, B2: 2%, B3: 5%, and B4: 10%. According to our findings, salinity stress negatively affected morphological and physiological growth parameters of kochia plants by decreasing the fresh and dry weight (25% and 28%, respectively), plant height (30%), circumference (46%), total chlorophyll (51%), and relative water content (29%) when compared to the controls. Furthermore, electrolyte leakage increased considerably (19%) due to salt stress. Significant morphological and physiological growth enhancements were seen at all biochar levels in comparison to the control treatment, with the highest level increasing plant height by 55%, circumference by 76%, total chlorophyll concentrations by 121%, and relative water content by 28%. Furthermore, it resulted in a 36% reduction in the stressed plants' electrolyte leakage. The findings demonstrated biochar's benefits in reducing salinity's negative effects on kochia plants.

Mathematical analysis of the effect of process conditions on the porous structure development of activated carbons derived from Pine cones

This paper presents the results of a study on the influence of the degree of impregnation and activation temperature on the formation of the porous structure of activated carbons (ACs) obtained from Pine cones by the chemical activation process using potassium hydroxide as an activator. The advanced new numerical clustering based adsorption analysis (LBET) method, together with the implemented unique numerical procedure for the fast multivariant identification were applied to nitrogen and carbon dioxide adsorption isotherms determined for porous structure characterization of the ACs. Moreover, the Quenched Solid Density Functional Theory (QSDFT) method was chosen to determine pore size distributions. The results showed a significant influence of the primary structure of Pine cones on the formation of the porous structure of the developed ACs. Among others, it was evidenced by a very high degree of surface heterogeneity of all the obtained ACs, irrespective of the degree of impregnation with potassium hydroxide and the activation temperature. Moreover, the analysis of carbon dioxide adsorption isotherms showed, that the porous structure of the studied ACs samples contains micropores accessible only to carbon dioxide molecules. The results also showed a significant advantage of the LBET method over those conventionally used for porous structure analysis based on Brunauer–Emmett–Teller (BET) and Dubinin–Raduskevich (DR) equations, because it takes into account surface heterogeneities. The novel analyses methods were more fully validated as a reliable characterization tool, by extending their application to the isotherms for ACs developed from the same precursor by phosphoric acid activation, and for samples arising from these ACs, further subjected to additional post-treatments. The effect of the raw material used as precursor was moreover analysed by comparison with previous reported results for other ACs. The complementarity of the results obtained with the LBET and QSDFT methods is also noteworthy, resulting in a more complete and reliable picture of the analyzed porous structures.