An Extensive Review and Comparison of Modern Biomass Torrefaction Reactors vs. Biomass Pyrolysis—Part 1

Alteration of biomass toxicity in torrefaction - A XDS-CALUX bioassay study

Torrefaction constitutes one of the promising technologies for the management of waste biomass and the production of high-carbon products for combustion, gasification, adsorption of pollutants or soil treatment. Unfortunately, waste biomass may be contaminated with toxic persistent organic pollutants, such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) and dioxin-like biphenyls (dl-PCB). Literature does not provide consistent measurements on how the low-temperature thermochemical processing, such as torrefaction, affects the toxicity of biomass. This contribution assesses how a torrefaction treatment, conducted at 200 °C, modifies the toxicity due to PCDD/PCDF/dl-PCB in biomass. We deploy the XDS-CALUX biotest on five types of waste biomass (sewage sludge, tree bark, cattle manure, spent coffee ground, common reed), before and after treatment. The content of total dioxin- & biphenyl fraction compounds in the raw biomass, investigated in this study, varies from 0.14 to 3.67 pg BEQ·g-1d.m., and in the torrefied biomass between 0.17 and 6.00 pg BEQ·g-1d.m.; BEQ stands for bioanalytical equivalent. This increase is statistically insignificant at p = 0.05, taking into account all types of examined biomass. This proves that low-temperature torrefaction cannot detoxify biomass, i.e., chars, produced from biomass characterized by elevated concentration of PCDD/PCDF/dl-PCB, will reflect the contamination of the feedstocks. With respect to heavy metals, we conclude that only the content of Cd in biomass, and, to a lesser extent, the abundance of Cu and Fe, modify the toxicity of this material during its thermochemical treatment at low temperature.

Comprehensive review on lignocellulosic biomass derived biochar production, characterization, utilization and applications

Biochar is an ample source of organic carbon prepared by the thermal breakdown of biomass. Lignocellulosic biomass is a promising precursor for biochar production, and has several applications in various industries. In addition, biochar can be applied for environmental revitalization by reducing the negative impacts through intrinsic mechanisms. In addition to its environmentally friendly nature, biochar has several recyclable and inexpensive benefits. Nourishing and detoxification of the environment can be undertaken using biochar by different investigators on account of its excellent contaminant removal capacity. Studies have shown that biochar can be improved by activation to remove toxic pollutants. In general, biochar is produced by closed-loop systems; however, decentralized methods have been proven to be more efficient for increasing resource efficiency in view of circular bio-economy and lignocellulosic waste management. In the last decade, several studies have been conducted to reveal the unexplored potential and to understand the knowledge gaps in different biochar-based applications. However, there is still a crucial need for research to acquire sufficient data regarding biochar modification and management, the utilization of lignocellulosic biomass, and achieving a sustainable paradigm. The present review has been articulated to provide a summary of information on different aspects of biochar, such as production, characterization, modification for improvisation, issues, and remediation have been addressed.

Valorization of Spirodela polyrrhiza biomass for the production of biofuels for distributed energy

Considering the main objectives of a circular economy, Lemnaceae plants have great potential for different types of techniques to valorize their biomass for use in biofuel production. For this reason, scientific interest in this group of plants has increased in recent years. The aim of this study was to evaluate the effects of salt stress on the growth and development of S. polyrrhiza and the valorization of biomass for biofuel and energy production in a circular economy. Plants were grown in a variety of culture media, including standard 'Z' medium, tap water, 1% digestate from a biogas plant in Piaszczyna (54° 01' 21″ N, 17° 10' 19″ E), Poland) and supplemented with different concentrations of NaCl (from 25 to 100 mM). Plants were cultured under phytotron conditions at 24 °C. After 10 days of culture, plant growth, fresh and dry biomass, as well as physio-chemical parameters such as chlorophyll content index, gas exchange parameters (net photosynthesis, transpiration, stomatal conductance and intercellular CO2 concentration), chlorophyll fluorescence measurements were analyzed. After 10 days of the experiment, the percentage starch content of Spirodela shoot segments was determined. S. polyrrhiza was shown to have a high starch storage capacity under certain unfavorable growth conditions, such as salt stress and nutrient deficiency. In the W2 (50 mM NaCl) series, compared to the control (Control2), starch levels were 76% higher in shoots and 30% lower in roots. The analysis of the individual growth and development parameters of S. polyrrhiza plants in the experiment carried out indicates new possibilities for the use of this group of plants in biofuel and bioethanol production.

Pyrolysis and Torrefaction-Thermal Treatment of Creosote-Impregnated Railroad Ties as a Method of Utilization

A fundamental issue of waste management and the rail transport industry is the problem of utilizing used railroad ties. Wooden railroad ties are treated with a preservative, usually creosote. Due to their high toxicity, railroad ties are considered hazardous waste and must be utilized under various directives. It is proposed to utilize the troublesome waste by using the pyrolysis and torrefaction process. The research proves that the thermal method is effective for disposing of this type of waste. Torrefaction up to 250 °C gives high efficiency of impregnation removal, while pyrolysis up to 400 °C completely neutralizes waste. A series of experiments were conducted for various final pyrolysis temperatures to determine a minimum temperature for which the obtained solid products are free from creosote. Extraction with the use of the Soxhlet technique was performed for the raw materials and the obtained solid products-chars. The oil content for liquid fraction was also examined for each sample. As a result of the thermal treatment of the waste, fuel with combustion parameters better than wood was obtained. For a high final temperature of the process, the calorific value of char is close to that of hard coal.

Influence of the Use of Permanent Catalytic Systems on the Flue Gases Emission from Biomass Low-Power Boilers

The paper presents the research results on the use of permanent catalytic systems applied to the surface of a low-power boiler deflector. The tests were carried out on a standard 15 kW retort boiler. The boiler was powered by three types of biomass pellets (wood pellets, wheat straw pellets, and hemp expeller). In the research cycle, the influence of the catalysts on the emission of individual compounds, CO, NOX, particulate matter (PM), polycyclic aromatic hydrocarbons (PAH), and volatile organic compounds (VOC) and the influence on the temperature in the combustion chamber were examined. The tests used an exhaust gas analyzer, a dust meter, a two-channel aspirator, and a laboratory gas chromatograph stand with a flame ionization detector. Four catalysts (copper, manganese, titanium, and platinum) were prepared for the analysis. Each catalyst had three variants of the active substance concentration on the ceramic support surface: 17.5 g, 35 g, 52.5 g for CuO, TiO2, MnO2, and, respectively, 0.05 g, 0.1 g, and 0.15 g for platinum. Concerning the deflector surface, this concentration corresponded to 140, 280, and 420 g·m−2 for CuO, TiO2, and MnO2, and 0.4, 0.8, and 1.2 g·m−2 for platinum catalysts. All the catalysts used contributed to an increase in the combustion temperature and a reduction in pollutant emissions. The results presented in the paper will allow the implementation of the developed solutions in the industry producing low-power boilers and in already-existing heating installations. The factor that motivates the introduction of changes may be continuously tightening European emission regulations.