Microalgae Harvest through Fungal Pelletization—Co-Culture of Chlorella vulgaris and Aspergillus niger

Aspergillus niger as an efficient biological agent for separator sludge remediation: two-level factorial design for optimal fermentation

Background

The booming palm oil industry is in line with the growing population worldwide and surge in demand. This leads to a massive generation of palm oil mill effluent (POME). POME is composed of sterilizer condensate (SC), separator sludge (SS), and hydro-cyclone wastewater (HCW). Comparatively, SS exhibits the highest organic content, resulting in various environmental impacts. However, past studies mainly focused on treating the final effluent. Therefore, this pioneering research investigated the optimization of pollutant removal in SS via different aspects of bioremediation, including experimental conditions, treatment efficiencies, mechanisms, and degradation pathways.

Methods

A two-level factorial design was employed to optimize the removal of chemical oxygen demand (COD) and turbidity using Aspergillus niger. Bioremediation of SS was performed through submerged fermentation (SmF) under several independent variables, including temperature (20-40 °C), agitation speed (100-200 RPM), fermentation duration (72-240 h), and initial sample concentration (20-100%). The characteristics of the treated SS were then compared to that of raw sludge.

Results

Optimal COD and turbidity removal were achieved at 37 °C 100 RPM, 156 h, and 100% sludge. The analysis of variance (ANOVA) revealed a significant effect of selective individual and interacting variables (p < 0.05). The highest COD and turbidity removal were 97.43% and 95.11%, respectively, with less than 5% error from the predicted values. Remarkably, the selected optimized conditions also reduced other polluting attributes, namely, biological oxygen demand (BOD), oil and grease (OG), color, and carbon content. In short, this study demonstrated the effectiveness of A. niger in treating SS through the application of a two-level factorial design.

Manipulation of co-pelletization for Chlorela vulgaris harvest by treatment of Aspergillus niger spore

The co-pelletization of microalgae with filamentous fungi was a promising approach for microalgae harvest. However, the real conditions of microalgae growth limited the arbitrary optimization of co-pellets formation with filamentous fungi. Therefore, it is urgent to develop an approach to manipulate the co-pelletization through treatment of A. niger spores. In this study, Aspergillus niger and Chlorella vulgaris were used as the model species of filamentous fungi and microalgae to investigate co-pellets formation using A. niger spores after by different pH solutions treatment, swelling, snailase treatment. The importance of spore treatments on C. vulgaris harvest in sequence was claimed based on response surface methodology analysis. The pH solutions treatment, swelling, snailase treatment of A. niger spore contributed 21.0%, 10.5%, 40.7% of harvest ratio of C. vulgaris respectively, which guided the application of spore treatment into co-pelletization. Treatment of spore was showed as an efficient approach to manipulate co-pelletization for microalgae harvest in diverse microalgae condition. This results promoted the application of co-pelletization technology in microalgae harvest of various conditions.

Microalgal co-cultivation -recent methods, trends in omic-studies, applications, and future challenges

The burgeoning human population has resulted in an augmented demand for raw materials and energy sources, which in turn has led to a deleterious environmental impact marked by elevated greenhouse gas (GHG) emissions, acidification of water bodies, and escalating global temperatures. Therefore, it is imperative that modern society develop sustainable technologies to avert future environmental degradation and generate alternative bioproduct-producing technologies. A promising approach to tackling this challenge involves utilizing natural microbial consortia or designing synthetic communities of microorganisms as a foundation to develop diverse and sustainable applications for bioproduct production, wastewater treatment, GHG emission reduction, energy crisis alleviation, and soil fertility enhancement. Microalgae, which are photosynthetic microorganisms that inhabit aquatic environments and exhibit a high capacity for CO2 fixation, are particularly appealing in this context. They can convert light energy and atmospheric CO2 or industrial flue gases into valuable biomass and organic chemicals, thereby contributing to GHG emission reduction. To date, most microalgae cultivation studies have focused on monoculture systems. However, maintaining a microalgae monoculture system can be challenging due to contamination by other microorganisms (e.g., yeasts, fungi, bacteria, and other microalgae species), which can lead to low productivity, culture collapse, and low-quality biomass. Co-culture systems, which produce robust microorganism consortia or communities, present a compelling strategy for addressing contamination problems. In recent years, research and development of innovative co-cultivation techniques have substantially increased. Nevertheless, many microalgae co-culturing technologies remain in the developmental phase and have yet to be scaled and commercialized. Accordingly, this review presents a thorough literature review of research conducted in the last few decades, exploring the advantages and disadvantages of microalgae co-cultivation systems that involve microalgae-bacteria, microalgae-fungi, and microalgae-microalgae/algae systems. The manuscript also addresses diverse uses of co-culture systems, and growing methods, and includes one of the most exciting research areas in co-culturing systems, which are omic studies that elucidate different interaction mechanisms among microbial communities. Finally, the manuscript discusses the economic viability, future challenges, and prospects of microalgal co-cultivation methods.

Integrated metagenomics and metabolomics analysis reveals changes in the microbiome and metabolites in the rhizosphere soil of Fritillaria unibracteata

Fritillaria unibracteata (FU) is a renowned herb in China that requires strict growth conditions in its cultivation process. During this process, the soil microorganisms and their metabolites may directly affect the growth and development of FU, for example, the pathogen infection and sipeimine production. However, few systematic studies have reported the changes in the microbiome and metabolites during FU cultivation thus far. In this work, we simultaneously used metagenomics and metabolomics technology to monitor the changes in microbial communities and metabolites in the rhizosphere of FU during its cultivation for one, two, and three years. Moreover, the interaction between microorganisms and metabolites was investigated by co-occurrence network analysis. The results showed that the microbial composition between the three cultivation-year groups was significantly different (2020-2022). The dominant genera changed from Pseudomonas and Botrytis in CC1 to Mycolicibacterium and Pseudogymnoascus in CC3. The relative abundances of beneficial microorganisms decreased, while the relative abundances of harmful microorganisms showed an increasing trend. The metabolomics results showed that significant changes of the of metabolite composition were observed in the rhizosphere soil, and the relative abundances of some beneficial metabolites showed a decreasing trend. In this study, we discussed the changes in the microbiome and metabolites during the three-year cultivation of FU and revealed the relationship between microorganisms and metabolites. This work provides a reference for the efficient and sustainable cultivation of FU.

Microbial Interactions between Marine Microalgae and Fungi: From Chemical Ecology to Biotechnological Possible Applications

Chemical interactions have been shown to regulate several marine life processes, including selection of food sources, defense, behavior, predation, and mate recognition. These chemical communication signals have effects not only at the individual scale, but also at population and community levels. This review focuses on chemical interactions between marine fungi and microalgae, summarizing studies on compounds synthetized when they are cultured together. In the current study, we also highlight possible biotechnological outcomes of the synthetized metabolites, mainly for human health applications. In addition, we discuss applications for bio-flocculation and bioremediation. Finally, we point out the necessity of further investigating microalgae-fungi chemical interactions because it is a field still less explored compared to microalga-bacteria communication and, considering the promising results obtained until now, it is worthy of further research for scientific advancement in both ecology and biotechnology fields.

Nutrient removal from biogas slurry and biogas upgrading by microalgae-fungi-bacteria co-cultivation under different carbon nanotubes concentration

In this study, Chlorella vulgaris, Ganoderma lucidum, and endophytic bacteria were co-cultivated with the stimulation of strigolactone analogs GR24 to prepare pellets. During the purification of biogas slurry and biogas, multi-walled carbon nanotubes (MWCNTs) were introduced to enhance the removal efficiencies of nutrients and CO₂. The results showed that both GR24 and MWCNTs affected the purification of biogas slurry and biogas. The maximum chemical oxygen demand, total nitrogen, total phosphorus, and CO₂ removal efficiencies of the Chlorella vulgaris-Ganoderma lucidum-endophytic bacterial symbionts were 82.57 ± 7.96% (P < 0.05), 82.14 ± 7.87% (P < 0.05), 84.27 ± 7.96% (P < 0.05), and 63.93 ± 6.22% (P < 0.05), respectively, with the induction of 10^-9 M GR24 and 1 mg L^-1 MWCNTs. Moreover, the growth and photosynthetic performance of the symbionts were consistent with the removal effects. The Chlorella vulgaris-Ganoderma lucidum-endophytic bacterial symbionts obtained high growth rates and enzyme activity with the maximum growth rate of 0.365 ± 0.03 d^-1, mean daily productivity of 0.182 ± 0.016 g L^-1 d^-1, and carbonic anhydrase activity of 31.07 ± 2.75 units, respectively. These results indicated that an appropriate concentration of GR24 and MWCNTs could promote the growth of symbionts, reinforce the purification effects of biogas slurry and biogas, and provide a new idea for the simultaneous purification of wastewater and biogas.

Capturing effects of filamentous fungi Aspergillus flavus ZJ-1 on microalgae Chlorella vulgaris WZ-1 and the application of their co-integrated fungi-algae pellets for Cu(II) adsorption

Using filamentous fungi to capture unicellular microalgae is an effective way for microalgae recovery in water treatment. Here, fungi Aspergillus flavus ZJ-1 and microalgae Chlorella vulgaris WZ-1 isolated from a copper tailings pond were used to study the capture effect of ZJ-1 on WZ-1. The highest capture efficiency (97.85%) was obtained within 6 h under the optimized conditions of 30 °C, 150 rpm, fungi-algae biomass ratio of 2.24:1, and initial pH of 9.24 in microalgae medium. The formed fungi-algae pellets (FAPs) were further used to remove Cu(II) from aqueous solution. Results showed that the FAPs formed at different capture times all adsorbed Cu(II) well, and the PAFs formed within 2 h (PAFs_2 h) exhibited the highest Cu(II) adsorption capacity (80.42 mg·g^-1). SEM images showed that Cu(II) caused a change in the internal structure of PAFs_2 h from loose to compact, the mycelium shrunk, and the microalgal cells were concave. Cu(II) adsorption by PAFs_2 h was well conformed to the pseudo-second-order kinetics and the Langmuir isotherm (123.61 mg·g^-1 of theoretically maximum adsorption capacity). This work opens a way for applying FAPs in the remediation of heavy metal-contaminated wastewater, and the metal adsorption effect was determined by the capture amount of microalgae.

Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy

The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.

Fungal Contamination in Microalgal Cultivation: Biological and Biotechnological Aspects of Fungi-Microalgae Interaction

In the last few decades, the increasing interest in microalgae as sources of new biomolecules and environmental remediators stimulated scientists’ investigations and industrial applications. Nowadays, microalgae are exploited in different fields such as cosmeceuticals, nutraceuticals and as human and animal food supplements. Microalgae can be grown using various cultivation systems depending on their final application. One of the main problems in microalgae cultivations is the possible presence of biological contaminants. Fungi, among the main contaminants in microalgal cultures, are able to influence the production and quality of biomass significantly. Here, we describe fungal contamination considering both shortcomings and benefits of fungi-microalgae interactions, highlighting the biological aspects of this interaction and the possible biotechnological applications.

Synergism and mutualistic interactions between microalgae and fungi in fungi-microalgae symbiotic system

The method of collecting microalgae using fungal mycelium pellets has attracted widespread attention because of its high efficiency and simplicity. In this study, the interaction in FMSS was explored using Aspergillus fumigatus and Synechocystis sp. PCC6803. Under the conditions of 25-30 °C, pH of 5.0, 160 rpm, a light intensity of 1000 lx, light to darkness ratio of 6:18 h, and glucose concentration of 1.5 g/L, the FMSS had the highest biomass and recovery efficiency. SEM, TEM, and Zeta analysis showed that microalgae can be fixed on the surface of fungal mycelium pellets by the electrostatic attraction (amino, amide, phosphate, hydroxyl, and aldehyde groups) of EPS. The N cycling and CO₂-O₂ cycling promoted the synthesis of amino acids and provided a guarantee for gas exchange, and the intermediate metabolites (CO₃^2- and HCO₃^-/H₂CO₃) satisfied the metabolic activities. The microalgae and fungi worked in coordination each other, which was the mutualistic symbiosis.

Mucor circinelloides: a model organism for oleaginous fungi and its potential applications in bioactive lipid production

Microbial oils have gained massive attention because of their significant role in industrial applications. Currently plants and animals are the chief sources of medically and nutritionally important fatty acids. However, the ever-increasing global demand for polyunsaturated fatty acids (PUFAs) cannot be met by the existing sources. Therefore microbes, especially fungi, represent an important alternative source of microbial oils being investigated. Mucor circinelloides—an oleaginous filamentous fungus, came to the forefront because of its high efficiency in synthesizing and accumulating lipids, like γ-linolenic acid (GLA) in high quantity. Recently, mycelium of M. circinelloides has acquired substantial attraction towards it as it has been suggested as a convenient raw material source for the generation of biodiesel via lipid transformation. Although M. circinelloides accumulates lipids naturally, metabolic engineering is found to be important for substantial increase in their yields. Both modifications of existing pathways and re-formation of biosynthetic pathways in M. circinelloides have shown the potential to improve lipid levels. In this review, recent advances in various important metabolic aspects of M. circinelloides have been discussed. Furthermore, the potential applications of M. circinelloides in the fields of antioxidants, nutraceuticals, bioremediation, ethanol production, and carotenoids like beta carotene and astaxanthin having significant nutritional value are also deliberated.

A fungal immobilization technique for efficient harvesting of oleaginous microalgae: Key parameter optimization, mechanism exploration and spent medium recycling

To confront with energy crisis, microalgae as the promising feedstock have a great potential in exploring renewable energy field, whereas the high costs related to medium preparation and biomass harvesting are the main bottleneck to hinder the development on a large scale. Though cultivation of filamentous fungi for microalgae harvesting is an efficient, sustainable and emerging method, and the studies on specific mechanisms and spent medium recycling for efficiency improvement as well as resource saving through a co-pelletization mode are urgently needed. Hence, in this study, the harvesting process of autotrophic microalgae Chlorella vulgaris by pre-cultured Aspergillus oryzae pellets was investigated systematically. The highest efficiency (99.23%) was obtained within 5 h under the optimized conditions of 30 °C, 130 rpm and fungi:algae ratio of 1:1 on a dry weight basis without demand for pH adjustment (initial value on 9.68). Charge neutralization was not the main mechanisms involved in fungi-algae aggregations, and the functional group changes on cell surfaces as well as secreted metabolites in medium could be mainly responsible for inducing the bioflocculation process. After harvesting, separated water could also effectively support microalgae re-growth. The biomass concentration in medium with 50% recycling was higher than that in fresh medium, while lipid content was increased from 24.37% to 33.97% in fully recycled medium. These results indicated that the pellet-assisted mode for algal harvesting is a promising way to promote biofuel production and resource recycling.

Co-culture of fungi-microalgae consortium for wastewater treatment: A review

The treatment of wastewater by microalgae has been studied and proved to be effective through previous studies. Due to the small size of microalgae, how to efficiently harvest microalgae from wastewater is a crucial factor restricting the development of algal technologies. Fungi-assisted microalgae bio-flocculation for microalgae harvesting and wastewater treatment simultaneously, which was overlooked previously, has attracted increasing attention in the recent decade due to its low cost and high efficiency. This review found that fungal hyphae and microalgae can stick together due to electrostatic neutralization, surface protein interaction, and exopolysaccharide adhesion in the co-culture process, realizing co-pelletization of microalgae and fungi, which is conducive to microalgae harvesting. Besides, the combination of fungi and microalgae has a complementary effect on pollutant removal from wastewaters. The co-culture of fungi-microalgae has excellent development prospects with both environmental and economic benefits, and it is expected to be applied on an industrial scale.

Co-culturing microbial consortia: approaches for applications in biomanufacturing and bioprocessing

The application of microbial co-cultures is now recognized in the fields of biotechnology, ecology, and medicine. Understanding the biological interactions that govern the association of microorganisms would shape the way in which artificial/synthetic co-cultures or consortia are developed. The ability to accurately predict and control cell-to-cell interactions fully would be a significant enabler in synthetic biology. Co-culturing method development holds the key to strategically engineer environments in which the co-cultured microorganism can be monitored. Various approaches have been employed which aim to emulate the natural environment and gain access to the untapped natural resources emerging from cross-talk between partners. Amongst these methods are the use of a communal liquid medium for growth, use of a solid-liquid interface, membrane separation, spatial separation, and use of microfluidics systems. Maximizing the information content of interactions monitored is one of the major challenges that needs to be addressed by these designs. This review critically evaluates the significance and drawbacks of the co-culturing approaches used to this day in biotechnological applications, relevant to biomanufacturing. It is recommended that experimental results for a co-cultured species should be validated with different co-culture approaches due to variations in interactions that could exist as a result of the culturing method selected.

Insight into formation and biological characteristics of Aspergillus tubingensis-based aerobic granular sludge (AT-AGS) in wastewater treatment

The long start-up time and facile biomass loss of aerobic granular sludge (AGS) impede its application for actual wastewater treatment. The present study investigates a novel assist-aggregation strategy based on Aspergillus tubingensis (AT) mycelium pellets to accelerate sludge granulation, and engineered Fe₃O₄ nanoparticles (NPs) were used to further enhance flocculent sludge (FS) aggregation. The AT mycelium pellets, modified by 0.5 g/L Fe₃O₄@SiO₂-QC NPs (AT-V), had a more compact internal structure than the unmodified group (AT-I). The content of extracellular polymeric substances (EPS) and the zeta potential values were observed to increase from 39.86 mg/gVSS and -9.19 mv for AT-I to 69.64 mg/gVSS and 2.35 mv for AT-V, respectively. In optimized cultivation conditions, the aggregated sludge biomass of AT-V reached 1.54 g/g. An original AT-based AGS (AT-AGS) with a high biological activity (64.45 mgO₂/gVSS·h as specific oxygen uptake rate) and enhanced velocity (58.22 m/h) was developed in only 9 days. The removal efficiencies of total nitrogen (TN) and total phosphorus (TP) of the AT-AGS were 12.24% and 16.29% higher than those of the inoculated FS under high feeding load. Additionally, the analysis of cyclic diguanylate (c-di-GMP) and con-focal microscope images implied that polysaccharide (PS) of EPS played an important role in maintaining the stability of the AT-AGS. Finally, the dominant functional species contributing to sludge aggregation and pollutants removal of the AT-AGS showed a larger richness and diversity than those of the inoculated FS. This study might provide a novel high-efficiency strategy for the fast formation of AGS.

Bioremediation of water containing pesticides by microalgae: Mechanisms, methods, and prospects for future research

The application of pesticides reduces the loss of crops while simultaneously increasing crop productivity. However, the frequent use of pesticides can cause serious environmental problems due to their high accumulative and persistent nature. Recently, microalgae technology has received considerable success in the efficient treatment of pesticides pollution. In this review, the metabolic mechanisms responsible for the removal of pesticides are summarized based on previous studies. Different methods used to enhance the ability of microalgae to remove pesticides are critically evaluated. The recycling of microalgae biomass after wastewater treatment for biochar preparation and biodiesel production using the biorefinery approach is also introduced. Furthermore, we present potential future research directions to highlight the prospects of microalgae research in the removal of pesticides along with the production of value-added products.

Bioflocculation of cyanobacteria with pellets of Aspergillus niger: Effects of carbon supplementation, pellet diameter, and other factors in biomass densification

One of the hurdles of renewable energy production from photosynthetic microorganisms is separating the biomass from water in cultures. Bioflocculation with filamentous fungus Aspergillus niger, an alternative low-cost method used for such separation, was studied with four cyanobacteria. Cocultures with Spirulina maxima and Synechococcus subsalsus resulted in bioflocculation efficiencies up to 94%, while with Anabaena variabilis and Anabaena siamensis bioflocculation did not occur. S. subsalsus was selected to evaluate the effect of cyanobacterial initial concentration, fungal:cyanobacterial ratio, carbon supplementation, and pH on biomass densification. Bioflocculation efficiencies up to 98% in 48 h were obtained with fungal:cyanobacterial ratio 1:5 and carbon supplementation. Despite the lower efficiency (54%), the highest concentration factor of S. subsalsus suspension (62.8 - from 0.9 to 56.5 g/L) was obtained with ratio 1:5 without supplementation. This result was attributed to the smaller pellet diameter (2.5 mm) and indicated that lower pellet growth is better for biomass densification.

Co-pelletization of microalgae and fungi for efficient nutrient purification and biogas upgrading

The fungi-assisted microalgae pellets were cultivated to simultaneously purify biogas slurry and biogas. Results demonstrated that the optimized culture conditions for the pellets were at the shaking speed of 160 rpm, initial inoculum concentration of 1.0 × 10⁶ spores L^-1 for microalgal cells, fungi/algae ratio of 1:10, mixed medium/simulated biogas slurry ratio of 3:7 incubated at a light intensity of 200 μmol m^-2 s^-1. Moreover, biogas slurry purification and biogas upgrading were successfully achieved by co-cultivation of fungi-assisted microalgae pellets at mixed light wavelength of red:blue of 5:5. The highest removal efficiency of COD, TN, TP and CO₂ were 92.17 ± 5.28%, 89.83 ± 4.36%, 90.31 ± 4.69% and 74.26 ± 3.14%, respectively. These results will provide a theoretical foundation for large-scale biogas slurry purification and biogas upgrading using fungi-assisted microalgal pellets.

Potential role of N-acetyl glucosamine in Aspergillus fumigatus-assisted Chlorella pyrenoidosa harvesting

BACKGROUND

Algal harvesting is a major cost which increases biofuel production cost. Algal biofuels are widely studied as third-generation biofuel. However, they are yet not viable because of its high production cost which is majorly contributed by energy-intensive biomass harvesting techniques. Biological harvesting method like fungal-assisted harvesting of microalgae is highly efficient but poses a challenge due to its slow kinetics and poorly understood mechanism.

RESULTS

In this study, we investigate Aspergillus fumigatus-Chlorella pyrenoidosa attachment resulting in a harvesting efficiency of 90% within 4 h. To pinpoint the role of extracellular metabolite, several experiments were performed by eliminating the C. pyrenoidosa or A. fumigatus spent medium from the C. pyrenoidosa-A. fumigatus mixture. In the absence of A. fumigatus spent medium, the harvesting efficiency dropped to 20% compared to > 90% in the control, which was regained after addition of A. fumigatus spent medium. Different treatments of A. fumigatus spent medium showed drop in harvesting efficiency after periodate treatment (≤ 20%) and methanol-chloroform extraction (≤ 20%), indicating the role of sugar-like moiety. HR-LC-MS (high-resolution liquid chromatography-mass spectrometry) results confirmed the presence of N-acetyl-d-glucosamine (GlcNAc) and glucose in the spent medium. When GlcNAc was used as a replacement of A. fumigatus spent medium for harvesting studies, the harvesting process was significantly faster (p < 0.05) till 4 h compared to that with glucose. Further experiments indicated that metabolically active A. fumigatus produced GlcNAc from glucose. Concanavalin A staining and FTIR (Fourier transform infrared spectroscopy) analysis of A. fumigatus spent medium- as well as GlcNAc-incubated C. pyrenoidosa cells suggested the presence of GlcNAc on its cell surface indicated by dark red dots and GlcNAc-specific peaks, while no such characteristic dots or peaks were observed in normal C. pyrenoidosa cells. HR-TEM (High-resolution Transmission electron microscopy) showed the formation of serrated edges on the C. pyrenoidosa cell surface after treatment with A. fumigatus spent medium or GlcNAc, while Atomic force microscopy (AFM) showed an increase in roughness of the C. pyrenoidosa cells surface upon incubation with A. fumigatus spent medium.

CONCLUSIONS

Results strongly suggest that GlcNAc present in A. fumigatus spent medium induces surface changes in C. pyrenoidosa cells that mediate the attachment to A. fumigatus hyphae. Thus, this study provides a better understanding of the A. fumigatus-assisted C. pyrenoidosa harvesting process.

A Review on the Use of Microalgae for Sustainable Aquaculture

Traditional aquaculture provides food for humans, but produces a large amount of wastewater, threatening global sustainability. The antibiotics abuse and the water replacement or treatment causes safety problems and increases the aquaculture cost. To overcome environmental and economic problems in the aquaculture industry, a lot of efforts have been devoted into the application of microalgae for wastewater remediation, biomass production, and water quality control. In this review, the systematic description of the technologies required for microalgae-assisted aquaculture and the recent progress were discussed. It deeply reviews the problems caused by the discharge of aquaculture wastewater and introduces the principles of microalgae-assisted aquaculture. Some interesting aspects, including nutrients assimilation mechanisms, algae cultivation systems (raceway pond and revolving algal biofilm), wastewater pretreatment, algal-bacterial cooperation, harvesting technologies (fungi-assisted harvesting and flotation), selection of algal species, and exploitation of value-added microalgae as aquaculture feed, were reviewed in this work. In view of the limitations of recent studies, to further reduce the negative effects of aquaculture wastewater on global sustainability, the future directions of microalgae-assisted aquaculture for industrial applications were suggested.

Critical applications of Mucor circinelloides within a biorefinery context

The establishment of an efficient and feasible biorefinery model depends on, among other factors, particularly the selection of the most appropriate microorganism. Mucor circinelloides is a dimorphic fungus species able to produce a wide variety of hydrolytic enzymes, lipids prone to biodiesel production, carotenoids, ethanol, and biomass with significant nutritional value. M. circinelloides also has been selected as a model species for genetic modification by being the first filamentous oleaginous species to have its genome fully characterized, as well as being a species characterized as a potential bioremediation agent. Considering the potential of replacing several nonrenewable feedstocks is widely dependent on fossil fuels, the exploitation of microbial processes and products is a desirable solution for promoting a green and sustainable future. Here, we introduce and thoroughly describe the recent and critical applications of this remarkable fungus within the context of developing a fungal-based biorefinery.

Co-cultivation of fungal-microalgal strains in biogas slurry and biogas purification under different initial CO2 concentrations

The effects of five different microalgae-fungi on nutrient removal and CO₂ removal were investigated under three different CO₂ contents (35%, 45% and 55%). The results showed that the highest nutrient and CO₂ removal efficiency were found at 55% CO₂ by cocultivation of different microalgae and fungi. The effect of different initial CO₂ concentration on the removal of CO₂ from microalgae was significant, and the order of CO₂ removal efficiency was 55% (v/v) >45% (v/v) >35% (v/v). The best nutrient removal and biogas purification could be achieved by co-cultivation of C. vulgaris and G. lucidum with 55% initial CO₂ content. The maximum mean COD, TN, TP and CO₂ removal efficiency can reach 68.29%, 61.75%, 64.21% and 64.68%, respectively under this condition. All highest COD, TN, TP and CO₂ removal efficiency were more than 85%. The analysis of energy consumption economic efficiency revealed that this strategy resulted in the highest economic efficiency. The results of this work can promote simultaneously biological purification of wastewater and biogas using microalgal-fungal symbiosis.

Microorganisms-based methods for harmful algal blooms control: A review

Harmful algal blooms (HABs) are a worldwide problem with numerous negative effects on water systems, which have prompted researchers to study applicable measures to inhibit and control them. This review summarized the current microorganisms-based methods or technologies aimed at controlling HABs. Based on their characteristics, these methods can be divided into two categories: methods based on single-species microorganisms and methods based on microbial aggregates, and four types: methods for rapid decrease of algal cells density (e.g., alga-bacterium and alga-fungus bioflocculation), inhibition of harmful algal growth, lysis of harmful algae (e.g. algicidal bacteria, fungi, and actinomycete), and methods based on microbial aggregates (periphytons and biofilms). An integrative process of "flocculation-lysis-degradation-nutrients regulation" is proposed to control HABs. This review not only offers a systematic understanding of HABs control technologies based on microorganisms but also elicits a re-thinking of HABs control based on microbial aggregates.

Bioflocculation: An alternative strategy for harvesting of microalgae - An overview

Microalgae based research has been extensively progressed for the production of value added products and biofuels. Potential application of microalgae for biofuel is recently gained more attention for possibilities of biodiesel and other high value metabolites. However, high cost of production of biomass associated with harvesting technologies is one of the major bottleneck for commercialization of algae based industrial product. Based on the operation economics, harvesting efficiency, technological possibilities, flocculation of algal biomass is a superior method for harvesting microalgae from the growth medium. In this article, latest trends of microalgal cell harvesting through flocculation are reviewed with emphasis on current progress and prospect in environmental friendly bio-based flocculation approach. Bio-flocculation based microalgae harvesting technologies is a promising strategy for low cost microalgal biomass production for various applications.