Assessing the Conversion of Various Nylon Polymers in the Hydrothermal Liquefaction of Macroalgae

An Overview of the Non-Energetic Valorization Possibilities of Plastic Waste via Thermochemical Processes

The recovery and recycling/upcycling of plastics and polymer-based materials is needed in order to reduce plastic waste accumulated over decades. Mechanical recycling processes have made a great contribution to the circularity of plastic materials, contributing to 99% of recycled thermoplastics. Challenges facing this family of processes limit its outreach to 30% of plastic waste. Complementary pathways are needed to increase recycling rates. Chemical processes have the advantage of decomposing plastics into a variety of hydrocarbons that can cover a wide range of applications, such as monomers, lubricants, phase change materials, solvents, BTX (benzene, toluene, xylene), etc. The aim of the present work is to shed light on different chemical recycling pathways, with a special focus on thermochemicals. The study will cover the effects of feedstock, operating conditions, and processes used on the final products. Then, it will attempt to correlate these final products to some petrochemical feedstock being used today on a large scale.

High resolution mass spectrometric suspect screening, wide-scope target analysis of emerging contaminants and determination of legacy pollutants in adult black-tailed godwit Limosa limosa limosa in the Netherlands - A pilot study

The Dutch breeding population of the black-tailed godwit Limosa limosa limosa has declined substantially over recent decades; the role of contaminants is unknown. We analysed liver samples from 11 adult birds found dead on their breeding grounds in SW Friesland 2016-2020, six from extensive, herb-rich grasslands, five from intensive grasslands. We carried out LC and GC wide-scope target analysis of more than 2400 substances, LC suspect screening for more than 60,000 substances, target analysis for Cd, Hg, Ni and Pb, organo-phosphate flame retardants (OPFRs), dechlorane plus compounds and selected polybrominated diphenyl ether flame retardants (PBDEs), and bioassay for polybrominated dibenzo-p-dioxins and dibenzofurans (PBDDs/PDBFs) and dioxin-like polychlorinated biphenyls (dl-PCBs). Residues of 29 emerging contaminants (ECs) were determined through wide-scope target analysis. Another 20 were tentatively identified through suspect screening. These contaminants include industrial chemicals (personal care products, surfactants, PAHs and others), plant protection products (PPPs) and pharmaceuticals and their transformation products. Total contaminant load detected by wide-scope target analysis ranged from c. 155 to c. 1400 ng g^-1 and was generally lower in birds from extensive grasslands. Heatmaps suggest that birds from intensive grasslands have a greater mix and higher residue concentrations of PPPs, while birds from extensive grasslands have a greater mix and higher residue concentrations of per- and polyfluoroalkyl substances (PFAS). All four metals and two OPFRs were detected. All tested PBDEs were below the respective LODs. Bioassay revealed presence of PBDDs, PBDFs and dl-PCBs. Further research is required to elucidate potential health risks to godwits and contaminant sources.

Thermochemical Conversion of Plastic Waste into Fuels, Chemicals, and Value-Added Materials: A Critical Review and Outlooks

Plastic waste is an emerging environmental issue for our society. Critical action to tackle this problem is to upcycle plastic waste as valuable feedstock. Thermochemical conversion of plastic waste has received growing attention. Although thermochemical conversion is promising for handling mixed plastic waste, it typically occurs at high temperatures (300-800 °C). Catalysts can play a critical role in improving the energy efficiency of thermochemical conversion, promoting targeted reactions, and improving product selectivity. This Review aims to summarize the state-of-the-art of catalytic thermochemical conversions of various types of plastic waste. First, general trends and recent development of catalytic thermochemical conversions including pyrolysis, gasification, hydrothermal processes, and chemolysis of plastic waste into fuels, chemicals, and value-added materials were reviewed. Second, the status quo for the commercial implementation of thermochemical conversion of plastic waste was summarized. Finally, the current challenges and future perspectives of catalytic thermochemical conversion of plastic waste including the design of sustainable and robust catalysts were discussed.

Disposable FFP2 and Type IIR Medical-Grade Face Masks: An Exhaustive Analysis into the Leaching of Micro- and Nanoparticles and Chemical Pollutants Linked to the COVID-19 Pandemic

The COVID-19 pandemic has increased the worldwide production and use of disposable plastic face masks (DPFMs). The release of micro- and nanopollutants into the environment is one of the impacts derived from regulated and unregulated disposal of DPFMs. This study focuses on the emission of pollutants from medical-grade DPFMs when submerged in deionized water, simulating regulated and unregulated disposal of these masks. Three brands of FFP2 and three brands of Type IIR medical masks, produced in various countries (UK, EU, and non-EU), were investigated. Field emission gun scanning electron microscopy (FEG-SEM) was used to obtain high-resolution images of the micro- and nanoparticles, and 0.02 μm pore size inorganic membranes were used to retain and subsequently analyze smaller particle size nanoparticles (>20 nm) released from the DPFMs. Particles and fibers in the micro- and nanoscale were found in all six DPFM brands. SEM with energy-dispersive spectroscopy analysis revealed the presence of particles containing different heavy metals like lead, mercury, and arsenic. Inductively coupled plasma mass spectrometry analysis confirmed the leaching of trace heavy metals to water (antimony up to 2.41 μg/L and copper up to 4.68 μg/L). Liquid chromatography-mass spectrometry analysis identified polar organic species related to plastic additives and contaminants such as polyamide-66 monomers and oligomers.

Distribution and characterization of plastic debris pollution along the Poompuhar Beach, Tamil Nadu, Southern India

The present study was carried out to determine the characteristics, distribution, and abundance of plastic debris in 25 sediment samples collected from the Poompuhar beach, southeast coast of India. The result reveals that the mean plastic debris abundance was 42 ± 27 particles/m² dry weight (dw) (1 SD, n = 25) with higher concentrations in the river mouth. The dominant shapes in the study area were fragment (70.7%), followed by fiber (20.7%), and pellet-shaped (8.6%). The dominant colors of the plastic debris were: white-colored (47%) followed by blue (28%) and green (14%). The study further reveals that the dominant polymer type was polyethylene (PE, 63.4%), followed by nylon (PA, 16.9), polyvinyl chloride (PVC, 15.5%), polypropylene (PP, 3.1%), and polystyrene (PS, 1.1%). In the study area, the main source of plastic debris was from land-based fishing and tourism activities, and rainwater runoff from the Cauvery River.

Review of Studies on Joint Recovery of Macroalgae and Marine Debris by Hydrothermal Liquefaction

At the moment, macroalgae blooms in sea waters, the rotting of which causes greenhouse gas emissions and contributes to the formation of a negative ecological and economic situation in coastal zones, which has become a serious problem. Fuel production through hydrothermal liquefaction (HTL) of macroalgae and marine debris is a promising solution to this ecological problem. The article provides an overview of studies on producing fuel from macroalgae and an assessment of the possibility of their joint recovery with marine debris. The optimal process conditions and their technological efficiency were evaluated. The article shows the feasibility of using heterogeneous catalysis and co-solvent to increase the yield of bio-oil and improve its quality. An assessment of the possibility of joint processing of waste macroalgae and marine debris showed the inexpediency of this direction. The high degree of drift macroalgae contamination also raises the question of the appropriateness of the preliminary extraction of other valuable components for nutrition use, such as fats, proteins, carbohydrates, and their derivatives.

Possibility Routes for Textile Recycling Technology

The fashion industry contributes to a significant environmental issue due to the increasing production and needs of the industry. The proactive efforts toward developing a more sustainable process via textile recycling has become the preferable solution. This urgent and important need to develop cheap and efficient recycling methods for textile waste has led to the research community's development of various recycling methods. The textile waste recycling process can be categorized into chemical and mechanical recycling methods. This paper provides an overview of the state of the art regarding different types of textile recycling technologies along with their current challenges and limitations. The critical parameters determining recycling performance are summarized and discussed and focus on the current challenges in mechanical and chemical recycling (pyrolysis, enzymatic hydrolysis, hydrothermal, ammonolysis, and glycolysis). Textile waste has been demonstrated to be re-spun into yarn (re-woven or knitted) by spinning carded yarn and mixed shoddy through mechanical recycling. On the other hand, it is difficult to recycle some textiles by means of enzymatic hydrolysis; high product yield has been shown under mild temperatures. Furthermore, the emergence of existing technology such as the internet of things (IoT) being implemented to enable efficient textile waste sorting and identification is also discussed. Moreover, we provide an outlook as to upcoming technological developments that will contribute to facilitating the circular economy, allowing for a more sustainable textile recycling process.