Heterogeneous Photocatalysis of Amoxicillin under Natural Conditions and High-Intensity Light: Fate, Transformation, and Mineralogical Impacts

Photodegradation of Amoxicillin in Aqueous Systems: A Review

Amoxicillin (AMX) is utilized in the treatment of several infectious diseases, and its concentration in wastewater has increased quite significantly over the years, posing high health hazards for humans and other living organisms. Investigations are in progress globally to eliminate AMX and other related pollutants using several methods that include adsorption, photolysis, photocatalytic degradation, photoelectrocatalytic degradation, and electrochemical conversion. AMX can be eliminated efficiently from the environment using photodegradation, either by photolysis or a photocatalytic process. Several types of semiconductor NMs have been used to eliminate AMX and other related drugs present in wastewater. This review spans the photodegradation studies conducted during the years 2018-2024 to degrade and eliminate AMX in aquatic systems. Several studies have been reported to eliminate AMX from different water streams. These studies are categorized into TiO2-containing and non-TiO2-based catalysts for better comparison. A section on photolysis is also included, showing the use of UV alone or with H2O2 or PS without using any nanomaterial. A tabulated summary of both types of catalysts showing the catalysts, reaction conditions, and degradation efficiency is presented. Researchers have used a variety of reaction conditions that include radiation types (UV, solar, and visible), pH of the solution, concentration of AMX, number of nanomaterials, presence of other additives and activators such as H2O2 as oxidant, and the influence of different salts like NaCl and CaCl2 on the photodegradation efficiency. TiO2 was the best nanomaterial found that achieved the highest degradation of AMX in ultraviolet irradiation. TiO2 doped with other nanomaterials showed very good performance under visible light. WO3 was also used by several investigators and found quite effective for AMX degradation. Other metal oxides used for AMX elimination were derived from molybdenum, zinc, manganese, copper, cerium, silver, etc. Some researchers have used UV and/or visible irradiation or sunlight, without using solid catalysts, in the presence of oxidants such as H2O2. A summarized description of earlier published reviews is also presented.

Performance of magnetic nanocomposite based on xanthan gum-grafted-poly(acrylamide) crosslinked by borax for the effective elimination of amoxicillin from aquatic environments

This study evaluated the effectiveness of using nanocomposite (NCs) of xanthan gum grafted polyacrylamide crosslinked Borax - iron oxide nanoparticle (XG-g-pAAm-CL-Borax-IONP) to remove the amoxicillin antibiotic (AMX) from an aquatic environment. To confirm the structural characteristics of the prepared XG-g-pAAm-CL-Borax-IONP NCs, unique characterization methods (XRD, FT-IR, FE-SEM, EDX, BET, TGA, Zeta, and VSM) were used. Adsorption experimental setups were performed with the influence of solution pH (4-9), the effect of adsorbent dose (0.003-0.02 g), the effect of contact time (5-45 min), and the effect of initial AMX concentration (50-400 mg/L) to achieve the most efficient adsorption conditions. Based on the Freundlich isotherm model, XG-g-pAAm-CL-Borax-IONP NCs provided the maximum AMX adsorption capacity of 1183.639 mg/g. This research on adsorption kinetics also established that the pseudo-second-order model (R2 = 0.991) is outstanding compatibility with the experimental results. AMX adsorption on the NCs may occur through intermolecular hydrogen bonding, diffusion, and trapping into the polymer network. Even after five cycles, these NCs still displayed the best performance. Based on these results, XG-g-pAAm-CL-Borax-IONP NCs may be a viable material for the purification of AMX from contaminated water.

Time series-based prediction of antibiotic degradation via photocatalysis using ensemble gradient boosting

This study aims to evaluate the effectiveness of the laboratory-made catalyst Ni2P-ZrO2 (NPZ) in the degradation of an antibiotic in an aqueous suspension when exposed to ultraviolet (UV) light. The degradation of amoxicillin (AMX) was predicted using time series forecasting through the ensemble gradient boosting model. The degradation experiments were conducted utilizing two distinct photocatalyst compositions of Nickel phosphide-zirconium dioxide (NPZ) in the proportions of 1:9 and 2:8. The most effective experimental results were obtained using a natural pH, a catalyst concentration of 0.20 g/L and reaction duration of 0.5 h after testing the different catalysts. Experimental data were used for training, validating and confirming time series predictions. The use of ensemble technique highly affected the experimental findings. The model's performance was quite satisfactory in terms of correlation coefficient (94.00%), normalized mean square error (0.01) and mean square root error (0.0911) which significantly contributed to the model's accuracy. All input variables, such as pH, catalyst dose and irradiation time, had a significant impact on the degrading efficacy. The study has demonstrated that time series forecasting can be used for predicting the degradation process precisely.

An advanced photo-oxidation process for pharmaceuticals using plasmon-assisted Ag-CoFe2O4 photocatalysts

The discharge of amoxicillin (AMX) from pharmaceutical intermediates has adverse effects on aquatic ecosystems. The elimination of AMX requires advanced oxidation processes (AOPs) that utilize high-performance photocatalysts. Furthermore, the design of highly visible light photocatalysts for AOPs demands both cost-effectiveness and efficiency. In this work, a plasmon-assisted visible light photocatalyst of 2D Ag-CoFe2O4 nanohybrids was successfully synthesized and characterized with several analytical tools to degrade AMX in aqueous solutions through advanced AOPs. The results showed that the Ag-CoFe2O4 nanohybrids had excellent photocatalytic activity and stability, which could efficiently reduce the AMX concentration by 99% within 70 min under visible light irradiation. In particular, CoFe2O4 and Ag have an interfacial contact that prevents electron-hole pair recombination more effectively than pure CoFe2O4, which results in electrons in its conduction band (CB) migrating to metallic Ag sites. Thus, charge transfers between the two materials are more efficient, leading to higher photocatalytic oxidation of AMX. Furthermore, the surface plasmon of Ag nanoparticles are excited by their plasmonic resonance, which increases the absorption of visible light. The plasmon-assisted visible light photocatalyst could replace expensive and energy-intensive advanced oxidation processes (AOPs). AOPs pathways associated with AMX have been discussed in detail. The HPLC chromatogram clearly showed AMX was oxidized by four-membered B-lactam ring opening and hydroxylation with •OH. 2D Ag-CoFe2O4 heterostructure was found to be efficient, selective, and cost-effective for the degradation of several pharmaceutical compounds. Additionally, it was found to be eco-friendly and sustainable, making it a viable alternative to AOPs.

Efficiency of Expired Drugs Used as Corrosion Inhibitors: A Review

Corrosion inhibitors represent one of the most commonly used methods for significantly reducing the corrosion rate of metals and alloys. Adsorption inhibitors have a wide range of applications in cooling water systems, deicing solutions for aircrafts, airports and ways, etching and degreasing solutions, oil pipelines, paints and coatings and metal processing solutions. Adsorption corrosion inhibitors of metals and alloys are generally organic compounds that contain structures with heteroatoms (N, P, S, As, O) in their molecules, having lone pair electrons or π electrons in aromatic rings or multiple bonds. They enable relatively strong interactions between the metal atoms and organic molecules, resulting in a protective layer of organic molecules adsorbed at the metal-corrosive solution interface. Most molecules of active substances from drugs contain similar structures, which is why many drugs have been already tested as corrosion inhibitors. One of the major disadvantages of using drugs for this purpose is their particularly high price. To overcome this impediment, the possibility of using expired drugs as corrosion inhibitors has been investigated since 2009. The present paper is an exhaustive compilation of the scientific published papers devoted to the use of expired drugs as corrosion inhibitors in various aggressive solutions. The inhibitory efficiencies of expired drugs are presented as a function of the studied metal or alloy and the nature of the aggressive solution, as well as the concentration of the inhibitor in such a solution. Research has especially been focused on mild and carbon steel and less on stainless steel, as well as on some metals such as copper, zinc, nickel, tin and aluminum and its alloys. The experimental methods used to assess the inhibitory efficiencies of expired drugs are briefly discussed. Also, the available information on the stability of the active substances in the drugs is presented, although most authors were not concerned with this aspect. Finally, several actions are revealed that must be undertaken by researchers so that the results obtained in the study of the anticorrosive action of expired drugs can be applied at the industrial level and not remain only an academic concern.