1
|
Ernst P, Saur KM, Kiefel R, Niehoff PJ, Weskott R, Büchs J, Jupke A, Wierckx N. Balancing pH and yield: exploring itaconic acid production in Ustilago cynodontis from an economic perspective. BIOTECHNOLOGY FOR BIOFUELS AND BIOPRODUCTS 2024; 17:103. [PMID: 39020434 DOI: 10.1186/s13068-024-02550-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/02/2024] [Accepted: 07/03/2024] [Indexed: 07/19/2024]
Abstract
BACKGROUND Itaconic acid is a promising bio-based building block for the synthesis of polymers, plastics, fibers and other materials. In recent years, Ustilago cynodontis has emerged as an additional itaconate producing non-conventional yeast, mainly due to its high acid tolerance, which significantly reduces saline waste coproduction during fermentation and downstream processing. As a result, this could likely improve the economic viability of the itaconic acid production process with Ustilaginaceae. RESULTS In this study, we characterized a previously engineered itaconate hyper-producing Ustilago cynodontis strain in controlled fed-batch fermentations to determine the minimal and optimal pH for itaconate production. Under optimal fermentation conditions, the hyper-producing strain can achieve the theoretical maximal itaconate yield during the production phase in a fermentation at pH 3.6, but at the expense of considerable base addition. Base consumption is strongly reduced at the pH of 2.8, but at cost of production yield, titer, and rate. A techno-economic analysis based on the entire process demonstrated that savings due to an additional decrease in pH control reagents and saline waste costs cannot compensate the yield loss observed at the highly acidic pH value 2.8. CONCLUSIONS Overall, this work provides novel data regarding the balancing of yield, titer, and rate in the context of pH, thereby contributing to a better understanding of the itaconic acid production process with Ustilago cynodontis, especially from an economic perspective.
Collapse
Affiliation(s)
- Philipp Ernst
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52428, Jülich, Germany
| | - Katharina Maria Saur
- Fluid Process Engineering (AVT.FVT), RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany
| | - Robert Kiefel
- Fluid Process Engineering (AVT.FVT), RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany
| | - Paul-Joachim Niehoff
- Biochemical Engineering (AVT.BioVT), RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany
| | - Ronja Weskott
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52428, Jülich, Germany
| | - Jochen Büchs
- Biochemical Engineering (AVT.BioVT), RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany
| | - Andreas Jupke
- Fluid Process Engineering (AVT.FVT), RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany
| | - Nick Wierckx
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52428, Jülich, Germany.
| |
Collapse
|
2
|
Niehoff PJ, Müller W, Pastoors J, Miebach K, Ernst P, Hemmerich J, Noack S, Wierckx N, Büchs J. Development of an itaconic acid production process with Ustilaginaceae on alternative feedstocks. BMC Biotechnol 2023; 23:34. [PMID: 37661280 PMCID: PMC10476437 DOI: 10.1186/s12896-023-00802-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/23/2023] [Accepted: 08/10/2023] [Indexed: 09/05/2023] Open
Abstract
BACKGROUND Currently, Aspergillus terreus is used for the industrial production of itaconic acid. Although, alternative feedstock use in fermentations is crucial for cost-efficient and sustainable itaconic acid production, their utilisation with A. terreus most often requires expensive pretreatment. Ustilaginacea are robust alternatives for itaconic acid production, evading the challenges, including the pretreatment of crude feedstocks regarding reduction of manganese concentration, that A. terreus poses. RESULTS In this study, five different Ustilago strains were screened for their growth and production of itaconic acid on defined media. The most promising strains were then used to find a suitable alternative feedstock, based on the local food industry. U. cynodontis ITA Max pH, a highly engineered production strain, was selected to determine the biologically available nitrogen concentration in thick juice and molasses. Based on these findings, thick juice was chosen as feedstock to ensure the necessary nitrogen limitation for itaconic acid production. U. cynodontis ITA Max pH was further characterised regarding osmotolerance and product inhibition and a successful scale-up to a 2 L stirred tank reactor was accomplished. A titer of 106.4 gitaconic acid/L with a theoretical yield of 0.50 gitaconic acid/gsucrose and a space-time yield of 0.72 gitaconic acid/L/h was reached. CONCLUSIONS This study demonstrates the utilisation of alternative feedstocks to produce ITA with Ustilaginaceae, without drawbacks in either titer or yield, compared to glucose fermentations.
Collapse
Affiliation(s)
- Paul-Joachim Niehoff
- AVT - Biochemical Engineering, RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany
| | - Waldemar Müller
- AVT - Biochemical Engineering, RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany
| | - Johannes Pastoors
- AVT - Biochemical Engineering, RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany
| | - Katharina Miebach
- AVT - Biochemical Engineering, RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany
| | - Philipp Ernst
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52428, Jülich, Germany
| | - Johannes Hemmerich
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52428, Jülich, Germany
| | - Stephan Noack
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52428, Jülich, Germany
| | - Nick Wierckx
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52428, Jülich, Germany
| | - Jochen Büchs
- AVT - Biochemical Engineering, RWTH Aachen University, Forckenbeckstraße 51, 52074, Aachen, Germany.
| |
Collapse
|
3
|
Papadopoulos L, Pezzana L, Malitowski NM, Sangermano M, Bikiaris DN, Robert T. UV-Curing Additive Manufacturing of Bio-Based Thermosets: Effect of Diluent Concentration on Printing and Material Properties of Itaconic Acid-Based Materials. ACS OMEGA 2023; 8:31009-31020. [PMID: 37663512 PMCID: PMC10468843 DOI: 10.1021/acsomega.3c02808] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/24/2023] [Accepted: 07/19/2023] [Indexed: 09/05/2023]
Abstract
In the quest toward sustainable thermosets, research has been conducted on various polymer classes like epoxy, benzoxazines, acryl-/methacrylates, etc. One particular group that can also be utilized as sustainable inks for additive manufacturing is itaconic acid-based unsaturated polyester resins. However, due to increased viscosity of the resins, the use of reactive diluents is required to increase their processability. While research has focused on creating different polymeric structures to expand the possible applications, the required amount of diluent has not received equal attention. In this work, a group of itaconic acid-based polyesters was synthesized to create a series of formulations with different reactive diluent contents. The physicochemical properties of the prepared formulations, along with their reactivity toward UV light, were assessed via photo-differential scanning calorimetry (photo-DSC), real-time attenuated total reflectance (RT-ATR), and photorheology measurements. The same formulations were then used to fabricate test specimens via digital light processing (DLP) three-dimensional (3D) printing, which were examined as to their thermomechanical properties by means of dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) measurements.
Collapse
Affiliation(s)
- Lazaros Papadopoulos
- Laboratory
of Polymer Chemistry and Technology, Department of Chemistry, Aristotle University of Thessaloniki, GR-541 24 Thessaloniki, Greece
| | - Lorenzo Pezzana
- Dipartimento
Scienza Applicata e Tecnologia, Politecnico
di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy
| | - Natalia Maria Malitowski
- Fraunhofer
Institute for Wood Research—Wilhelm-Klauditz-Institut WKI, Riedenkamp 3, 38108 Braunschweig, Germany
| | - Marco Sangermano
- Dipartimento
Scienza Applicata e Tecnologia, Politecnico
di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy
| | - Dimitrios N. Bikiaris
- Laboratory
of Polymer Chemistry and Technology, Department of Chemistry, Aristotle University of Thessaloniki, GR-541 24 Thessaloniki, Greece
| | - Tobias Robert
- Fraunhofer
Institute for Wood Research—Wilhelm-Klauditz-Institut WKI, Riedenkamp 3, 38108 Braunschweig, Germany
| |
Collapse
|
4
|
Saur KM, Kiefel R, Niehoff PJ, Hofstede J, Ernst P, Brockkötter J, Gätgens J, Viell J, Noack S, Wierckx N, Büchs J, Jupke A. Holistic Approach to Process Design and Scale-Up for Itaconic Acid Production from Crude Substrates. Bioengineering (Basel) 2023; 10:723. [PMID: 37370654 DOI: 10.3390/bioengineering10060723] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Revised: 06/01/2023] [Accepted: 06/02/2023] [Indexed: 06/29/2023] Open
Abstract
Bio-based bulk chemicals such as carboxylic acids continue to struggle to compete with their fossil counterparts on an economic basis. One possibility to improve the economic feasibility is the use of crude substrates in biorefineries. However, impurities in these substrates pose challenges in fermentation and purification, requiring interdisciplinary research. This work demonstrates a holistic approach to biorefinery process development, using itaconic acid production on thick juice based on sugar beets with Ustilago sp. as an example. A conceptual process design with data from artificially prepared solutions and literature data from fermentation on glucose guides the simultaneous development of the upstream and downstream processes up to a 100 L scale. Techno-economic analysis reveals substrate consumption as the main constituent of production costs and therefore, the product yield is the driver of process economics. Aligning pH-adjusting agents in the fermentation and the downstream process is a central lever for product recovery. Experiments show that fermentation can be transferred from glucose to thick juice by changing the feeding profile. In downstream processing, an additional decolorization step is necessary to remove impurities accompanying the crude substrate. Moreover, we observe an increased use of pH-adjusting agents compared to process simulations.
Collapse
Affiliation(s)
- Katharina Maria Saur
- Fluid Process Engineering (AVT.FVT), RWTH Aachen University, 52074 Aachen, Germany
| | - Robert Kiefel
- Fluid Process Engineering (AVT.FVT), RWTH Aachen University, 52074 Aachen, Germany
| | - Paul-Joachim Niehoff
- Biochemical Engineering (AVT.BioVT), RWTH Aachen University, 52074 Aachen, Germany
| | - Jordy Hofstede
- Process Systems Engineering (AVT.SVT), RWTH Aachen University, 52074 Aachen, Germany
| | - Philipp Ernst
- Forschungszentrum Jülich, Institute of Bio- and Geosciences IBG-1, 52428 Jülich, Germany
| | - Johannes Brockkötter
- Fluid Process Engineering (AVT.FVT), RWTH Aachen University, 52074 Aachen, Germany
| | - Jochem Gätgens
- Forschungszentrum Jülich, Institute of Bio- and Geosciences IBG-1, 52428 Jülich, Germany
| | - Jörn Viell
- Process Systems Engineering (AVT.SVT), RWTH Aachen University, 52074 Aachen, Germany
| | - Stephan Noack
- Forschungszentrum Jülich, Institute of Bio- and Geosciences IBG-1, 52428 Jülich, Germany
| | - Nick Wierckx
- Forschungszentrum Jülich, Institute of Bio- and Geosciences IBG-1, 52428 Jülich, Germany
| | - Jochen Büchs
- Biochemical Engineering (AVT.BioVT), RWTH Aachen University, 52074 Aachen, Germany
| | - Andreas Jupke
- Fluid Process Engineering (AVT.FVT), RWTH Aachen University, 52074 Aachen, Germany
| |
Collapse
|
5
|
Diankristanti PA, Ng IS. Microbial itaconic acid bioproduction towards sustainable development: Insights, challenges, and prospects. BIORESOURCE TECHNOLOGY 2023:129280. [PMID: 37290713 DOI: 10.1016/j.biortech.2023.129280] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/03/2023] [Revised: 05/30/2023] [Accepted: 06/01/2023] [Indexed: 06/10/2023]
Abstract
Microbial biomanufacturing is a promising approach to produce high-value compounds with low-carbon footprint and significant economic benefits. Among twelve "Top Value-Added Chemicals from Biomass", itaconic acid (IA) stands out as a versatile platform chemical with numerous applications. IA is naturally produced by Aspergillus and Ustilago species through a cascade enzymatic reaction between aconitase (EC 4.2.1.3) and cis-aconitic acid decarboxylase (EC 4.1.1.6). Recently, non-native hosts such as Escherichia coli, Corynebacterium glutamicum, Saccharomyces cerevisiae, and Yarrowia lipolytica have been genetically engineered to produce IA through the introduction of key enzymes. This review provides an up-to-date summary of the progress made in IA bioproduction, from native to engineered hosts, covers in vivo and in vitro approaches, and highlights the prospects of combination tactics. Current challenges and recent endeavors are also addressed to envision comprehensive strategies for renewable IA production in the future towards sustainable development goals (SDGs).
Collapse
Affiliation(s)
| | - I-Son Ng
- Department of Chemical Engineering, National Cheng Kung University, Tainan 701, Taiwan.
| |
Collapse
|
6
|
Becker J, Liebal UW, Phan AN, Ullmann L, Blank LM. Renewable carbon sources to biochemicals and -fuels: contributions of the smut fungi Ustilaginaceae. Curr Opin Biotechnol 2023; 79:102849. [PMID: 36446145 DOI: 10.1016/j.copbio.2022.102849] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/16/2022] [Revised: 10/27/2022] [Accepted: 11/01/2022] [Indexed: 11/27/2022]
Abstract
The global demand for food, fuels, and chemicals increases annually. Using renewable C-sources (i.e. biomass, CO2, and organic waste) is a prerequisite for a future free of fossil carbon. The smut fungi Ustilaginaceae naturally produce a versatile spectrum of valuable products, such as organic acids, polyols, and glycolipids, applicable in the food, energy, chemistry, and pharmaceutical sector. Combined with the use of alternative (co-)substrates (e.g. acetate, butanediol, formate, and glycerol), these microorganisms offer excellent potential for industrial biotechnology, thereby overcoming central challenges humankind faces, including CO2 release and land use. Here, we provide insight into fundamental production capacities, present genetic modifications that improve the biotechnical application, and review recent high-performance engineering of Ustilaginaceae toward relevant platform chemicals.
Collapse
Affiliation(s)
- Johanna Becker
- iAMB - Institute of Applied Microbiology, ABBt - Aachen Biology and Biotechnology, RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany
| | - Ulf W Liebal
- iAMB - Institute of Applied Microbiology, ABBt - Aachen Biology and Biotechnology, RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany
| | - An Nt Phan
- iAMB - Institute of Applied Microbiology, ABBt - Aachen Biology and Biotechnology, RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany
| | - Lena Ullmann
- iAMB - Institute of Applied Microbiology, ABBt - Aachen Biology and Biotechnology, RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany
| | - Lars M Blank
- iAMB - Institute of Applied Microbiology, ABBt - Aachen Biology and Biotechnology, RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany.
| |
Collapse
|
7
|
Recent Advances on the Production of Itaconic Acid via the Fermentation and Metabolic Engineering. FERMENTATION 2023. [DOI: 10.3390/fermentation9010071] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/18/2023] Open
Abstract
Itaconic acid (ITA) is one of the top 12 platform chemicals. The global ITA market is expanding due to the rising demand for bio-based unsaturated polyester resin and its non-toxic qualities. Although bioconversion using microbes is the main approach in the current industrial production of ITA, ecological production of bio-based ITA faces several issues due to: low production efficiency, the difficulty to employ inexpensive raw materials, and high manufacturing costs. As metabolic engineering advances, the engineering of microorganisms offers a novel strategy for the promotion of ITA bio-production. In this review, the most recent developments in the production of ITA through fermentation and metabolic engineering are compiled from a variety of perspectives, including the identification of the ITA synthesis pathway, the metabolic engineering of natural ITA producers, the design and construction of the ITA synthesis pathway in model chassis, and the creation, as well as application, of new metabolic engineering strategies in ITA production. The challenges encountered in the bio-production of ITA in microbial cell factories are discussed, and some suggestions for future study are also proposed, which it is hoped offers insightful views to promote the cost-efficient and sustainable industrial production of ITA.
Collapse
|
8
|
Melilli G, Guigo N, Robert T, Sbirrazzuoli N. Radical Oxidation of Itaconic Acid-Derived Unsaturated Polyesters under Thermal Curing Conditions. Macromolecules 2022. [DOI: 10.1021/acs.macromol.2c01682] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Giuseppe Melilli
- Université Côte d’Azur, Institut de Chimie de Nice, UMR CNRS 7272, Nice06100, France
| | - Nathanael Guigo
- Université Côte d’Azur, Institut de Chimie de Nice, UMR CNRS 7272, Nice06100, France
| | - Tobias Robert
- Fraunhofer-Institute for Wood Research, Wilhelm-Klauditz-Institut, Bienroder Weg 54E, Braunschweig38108, Germany
| | - Nicolas Sbirrazzuoli
- Université Côte d’Azur, Institut de Chimie de Nice, UMR CNRS 7272, Nice06100, France
| |
Collapse
|
9
|
Nanocellulose bio-based composites for the removal of methylene blue from water: An experimental and theoretical exploration. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2022.119089] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
10
|
Oraby A, Rupp S, Zibek S. Techno-Economic Analysis as a Driver for Optimisation of Cellobiose Lipid Fermentation and Purification. Front Bioeng Biotechnol 2022; 10:913351. [PMID: 35782519 PMCID: PMC9249125 DOI: 10.3389/fbioe.2022.913351] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2022] [Accepted: 05/02/2022] [Indexed: 11/13/2022] Open
Abstract
Cellobiose lipids (CL) are glycolipids synthesized by Ustilaginaceae species with potential application as detergents or in cosmetics. This study identified process optimisation potential for CL fermentation based on process modelling and techno-economic analysis. Using a stoichiometric equation based on laboratory data, we calculated the maximum possible CL yield YP/S of 0.45 gCL·gglucose−1 at the biomass yield of 0.10 gBiomass·gglucose−1 with an Ustilago maydis strain. Due to substrate inhibition that may occur at high glucose concentrations, a fed-batch process to increase biomass and CL concentrations was considered in our model. Simulation of different process scenarios showed that the choice of aeration units with high oxygen transfer rates and adaptation of power input to oxygen uptake can significantly decrease electricity consumption. We further assessed scenarios with different fermentation media and CL purification methods, suggesting additional process optimisation potential. Here the omission of vitamins from the fermentation medium proved to be a possible mean to enhance process economy, without compromising CL productivity.
Collapse
Affiliation(s)
- Amira Oraby
- Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB, Stuttgart, Germany
- Institute of Interfacial Process Engineering and Plasma Technology IGVP, University of Stuttgart, Stuttgart, Germany
| | - Steffen Rupp
- Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB, Stuttgart, Germany
- Institute of Interfacial Process Engineering and Plasma Technology IGVP, University of Stuttgart, Stuttgart, Germany
| | - Susanne Zibek
- Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB, Stuttgart, Germany
- Institute of Interfacial Process Engineering and Plasma Technology IGVP, University of Stuttgart, Stuttgart, Germany
- *Correspondence: Susanne Zibek,
| |
Collapse
|
11
|
Nascimento MF, Marques N, Correia J, Faria NT, Mira NP, Ferreira FC. Integrated perspective on microbe-based production of itaconic acid: from metabolic and strain engineering to upstream and downstream strategies. Process Biochem 2022. [DOI: 10.1016/j.procbio.2022.03.020] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
|
12
|
Teleky BE, Vodnar DC. Recent Advances in Biotechnological Itaconic Acid Production, and Application for a Sustainable Approach. Polymers (Basel) 2021; 13:3574. [PMID: 34685333 PMCID: PMC8539575 DOI: 10.3390/polym13203574] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2021] [Revised: 10/09/2021] [Accepted: 10/13/2021] [Indexed: 12/14/2022] Open
Abstract
Intense research has been conducted to produce environmentally friendly biopolymers obtained from renewable feedstock to substitute fossil-based materials. This is an essential aspect for implementing the circular bioeconomy strategy, expressly declared by the European Commission in 2018 in terms of "repair, reuse, and recycling". Competent carbon-neutral alternatives are renewable biomass waste for chemical element production, with proficient recyclability properties. Itaconic acid (IA) is a valuable platform chemical integrated into the first 12 building block compounds the achievement of which is feasible from renewable biomass or bio-wastes (agricultural, food by-products, or municipal organic waste) in conformity with the US Department of Energy. IA is primarily obtained through fermentation with Aspergillus terreus, but nowadays several microorganisms are genetically engineered to produce this organic acid in high quantities and on different substrates. Given its trifunctional structure, IA allows the synthesis of various novel biopolymers, such as drug carriers, intelligent food packaging, antimicrobial biopolymers, hydrogels in water treatment and analysis, and superabsorbent polymers binding agents. In addition, IA shows antimicrobial, anti-inflammatory, and antitumor activity. Moreover, this biopolymer retains qualities like environmental effectiveness, biocompatibility, and sustainability. This manuscript aims to address the production of IA from renewable sources to create a sustainable circular economy in the future. Moreover, being an essential monomer in polymer synthesis it possesses a continuous provocation in the biopolymer chemistry domain and technologies, as defined in the present review.
Collapse
Affiliation(s)
- Bernadette-Emőke Teleky
- Institute of Life Sciences, University of Agricultural Sciences and Veterinary Medicine, Calea Mănăstur 3-5, 400372 Cluj-Napoca, Romania;
| | - Dan Cristian Vodnar
- Faculty of Food Science and Technology, Institute of Life Sciences, University of Agricultural Sciences and Veterinary Medicine of Cluj-Napoca, Calea Mănăștur 3-5, 400372 Cluj-Napoca, Romania
| |
Collapse
|
13
|
Gopaliya D, Kumar V, Khare SK. Recent advances in itaconic acid production from microbial cell factories. BIOCATALYSIS AND AGRICULTURAL BIOTECHNOLOGY 2021. [DOI: 10.1016/j.bcab.2021.102130] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|
14
|
Weiermüller J, Akermann A, Laudensack W, Chodorski J, Blank LM, Ulber R. Brewers' spent grain as carbon source for itaconate production with engineered Ustilago maydis. BIORESOURCE TECHNOLOGY 2021; 336:125262. [PMID: 34044241 DOI: 10.1016/j.biortech.2021.125262] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/23/2021] [Revised: 05/04/2021] [Accepted: 05/05/2021] [Indexed: 06/12/2023]
Abstract
Brewers' spent grain (BSG) is produced worldwide in millions of tons during the beer brewing process. Due to its high content of structural carbohydrates, BSG is a promising material for being valorised in biorefineries. In this study three process routes for producing itaconate from BSG hydrolysates are presented using the previously engineered smut fungi UstilagomaydisMB215Δcyp3ΔPria1::Petef as whole-cell biocatalyst. Using a fermentation medium based on BSG hydrolysate a yield of 0.38gIta/gSugar and a productivity of 0.11gIta/(L·h) were achieved. The addition of detoxified hydrothermal supernatant to the fermentation medium did not result in improved performance parameters but resulted in a decreased yield (0.29gIta/gSugar) and productivity (0.053 gIta/(L·h)). Simultaneous saccharification and fermentation with hydrothermal pretreated BSG is possible, although at lower rate. In summary, the valorisation of BSG in fungal fermentations might complement the end-of-life options of this industrial side product.
Collapse
Affiliation(s)
- Jens Weiermüller
- TU Kaiserslautern, Department of Mechanical and Process Engineering, Chair of Bioprocess Engineering, Gottlieb-Daimler-Straße 49, 67663 Kaiserslautern, Germany
| | - Alexander Akermann
- TU Kaiserslautern, Department of Mechanical and Process Engineering, Chair of Bioprocess Engineering, Gottlieb-Daimler-Straße 49, 67663 Kaiserslautern, Germany
| | - Wolfgang Laudensack
- TU Kaiserslautern, Department of Mechanical and Process Engineering, Chair of Bioprocess Engineering, Gottlieb-Daimler-Straße 49, 67663 Kaiserslautern, Germany
| | - Jonas Chodorski
- TU Kaiserslautern, Department of Mechanical and Process Engineering, Chair of Bioprocess Engineering, Gottlieb-Daimler-Straße 49, 67663 Kaiserslautern, Germany
| | - Lars M Blank
- Institute of Applied Microbiology - iAMB, Aachen Biology and Biotechnology - ABBt, RWTH Aachen University, Worringer Weg 1, 52074 Aachen, Germany
| | - Roland Ulber
- TU Kaiserslautern, Department of Mechanical and Process Engineering, Chair of Bioprocess Engineering, Gottlieb-Daimler-Straße 49, 67663 Kaiserslautern, Germany.
| |
Collapse
|
15
|
Perspectives for the application of Ustilaginaceae as biotech cell factories. Essays Biochem 2021; 65:365-379. [PMID: 33860800 DOI: 10.1042/ebc20200141] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2021] [Revised: 03/15/2021] [Accepted: 03/17/2021] [Indexed: 01/05/2023]
Abstract
Basidiomycetes fungi of the family Ustilaginaceae are mainly known as plant pathogens causing smut disease on crops and grasses. However, they are also natural producers of value-added substances like glycolipids, organic acids, polyols, and harbor secretory enzymes with promising hydrolytic activities. These attributes recently evoked increasing interest in their biotechnological exploitation. The corn smut fungus Ustilago maydis is the best characterized member of the Ustilaginaceae. After decades of research in the fields of genetics and plant pathology, a broad method portfolio and detailed knowledge on its biology and biochemistry are available. As a consequence, U. maydis has developed into a versatile model organism not only for fundamental research but also for applied biotechnology. Novel genetic, synthetic biology, and process development approaches have been implemented to engineer yields and product specificity as well as for the expansion of the repertoire of produced substances. Furthermore, research on U. maydis also substantially promoted the interest in other members of the Ustilaginaceae, for which the available tools can be adapted. Here, we review the latest developments in applied research on Ustilaginaceae towards their establishment as future biotech cell factories.
Collapse
|
16
|
Ullmann L, Phan ANT, Kaplan DKP, Blank LM. Ustilaginaceae Biocatalyst for Co-Metabolism of CO 2-Derived Substrates toward Carbon-Neutral Itaconate Production. J Fungi (Basel) 2021; 7:jof7020098. [PMID: 33573033 PMCID: PMC7911105 DOI: 10.3390/jof7020098] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/26/2020] [Revised: 01/26/2021] [Accepted: 01/27/2021] [Indexed: 12/14/2022] Open
Abstract
The family Ustilaginaceae (belonging to the smut fungi) are known for their plant pathogenicity. Despite the fact that these plant diseases cause agricultural yield reduction, smut fungi attracted special attention in the field of industrial biotechnology. Ustilaginaceae show a versatile product spectrum such as organic acids (e.g., itaconate, malate, succinate), polyols (e.g., erythritol, mannitol), and extracellular glycolipids, which are considered value-added chemicals with potential applications in the pharmaceutical, food, and chemical industries. This study focused on itaconate as a platform chemical for the production of resins, plastics, adhesives, and biofuels. During this work, 72 different Ustilaginaceae strains from 36 species were investigated for their ability to (co-) consume the CO2-derived substrates acetate and formate, potentially contributing toward a carbon-neutral itaconate production. The fungal growth and product spectrum with special interest in itaconate was characterized. Ustilago maydis MB215 and Ustilago rabenhorstiana NBRC 8995 were identified as promising candidates for acetate metabolization whereas Ustilago cynodontis NBRC 7530 was identified as a potential production host using formate as a co-substrate enhancing the itaconate production. Selected strains with the best itaconate production were characterized in more detail in controlled-batch bioreactor experiments confirming the co-substrate utilization. Thus, a proof-of-principle study was performed resulting in the identification and characterization of three promising Ustilaginaceae biocatalyst candidates for carbon-neutral itaconate production contributing to the biotechnological relevance of Ustilaginaceae.
Collapse
|
17
|
Becker J, Hosseinpour Tehrani H, Ernst P, Blank LM, Wierckx N. An Optimized Ustilago maydis for Itaconic Acid Production at Maximal Theoretical Yield. J Fungi (Basel) 2020; 7:20. [PMID: 33396473 PMCID: PMC7824378 DOI: 10.3390/jof7010020] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2020] [Revised: 12/27/2020] [Accepted: 12/29/2020] [Indexed: 11/16/2022] Open
Abstract
Ustilago maydis, a member of the Ustilaginaceae family, is a promising host for the production of several metabolites including itaconic acid. This dicarboxylate has great potential as a bio-based building block in the polymer industry, and is of special interest for pharmaceutical applications. Several itaconate overproducing Ustilago strains have been generated by metabolic and morphology engineering. This yielded stabilized unicellular morphology through fuz7 deletion, reduction of by-product formation through deletion of genes responsible for itaconate oxidation and (glyco)lipid production, and the overexpression of the regulator of the itaconate cluster ria1 and the mitochondrial tricarboxylate transporter encoded by mttA from Aspergillus terreus. In this study, itaconate production was further optimized by consolidating these different optimizations into one strain. The combined modifications resulted in itaconic acid production at theoretical maximal yield, which was achieved under biotechnologically relevant fed-batch fermentations with continuous feed.
Collapse
Affiliation(s)
- Johanna Becker
- iAMB—Institute of Applied Microbiology, ABBt—Aachen Biology and Biotechnology, RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany; (J.B.); (H.H.T.); (L.M.B.)
| | - Hamed Hosseinpour Tehrani
- iAMB—Institute of Applied Microbiology, ABBt—Aachen Biology and Biotechnology, RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany; (J.B.); (H.H.T.); (L.M.B.)
| | - Philipp Ernst
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich, 52425 Jülich, Germany;
| | - Lars Mathias Blank
- iAMB—Institute of Applied Microbiology, ABBt—Aachen Biology and Biotechnology, RWTH Aachen University, Worringerweg 1, 52074 Aachen, Germany; (J.B.); (H.H.T.); (L.M.B.)
| | - Nick Wierckx
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich, 52425 Jülich, Germany;
| |
Collapse
|
18
|
Schlembach I, Hosseinpour Tehrani H, Blank LM, Büchs J, Wierckx N, Regestein L, Rosenbaum MA. Consolidated bioprocessing of cellulose to itaconic acid by a co-culture of Trichoderma reesei and Ustilago maydis. BIOTECHNOLOGY FOR BIOFUELS 2020; 13:207. [PMID: 33317635 PMCID: PMC7737373 DOI: 10.1186/s13068-020-01835-4] [Citation(s) in RCA: 31] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/17/2020] [Accepted: 11/17/2020] [Indexed: 05/15/2023]
Abstract
BACKGROUND Itaconic acid is a bio-derived platform chemical with uses ranging from polymer synthesis to biofuel production. The efficient conversion of cellulosic waste streams into itaconic acid could thus enable the sustainable production of a variety of substitutes for fossil oil based products. However, the realization of such a process is currently hindered by an expensive conversion of cellulose into fermentable sugars. Here, we present the stepwise development of a fully consolidated bioprocess (CBP), which is capable of directly converting recalcitrant cellulose into itaconic acid without the need for separate cellulose hydrolysis including the application of commercial cellulases. The process is based on a synthetic microbial consortium of the cellulase producer Trichoderma reesei and the itaconic acid producing yeast Ustilago maydis. A method for process monitoring was developed to estimate cellulose consumption, itaconic acid formation as well as the actual itaconic acid production yield online during co-cultivation. RESULTS The efficiency of the process was compared to a simultaneous saccharification and fermentation setup (SSF). Because of the additional substrate consumption of T. reesei in the CBP, the itaconic acid yield was significantly lower in the CBP than in the SSF. In order to increase yield and productivity of itaconic acid in the CBP, the population dynamics was manipulated by varying the inoculation delay between T. reesei and U. maydis. Surprisingly, neither inoculation delay nor inoculation density significantly affected the population development or the CBP performance. Instead, the substrate availability was the most important parameter. U. maydis was only able to grow and to produce itaconic acid when the cellulose concentration and thus, the sugar supply rate, was high. Finally, the metabolic processes during fed-batch CBP were analyzed in depth by online respiration measurements. Thereby, substrate availability was again identified as key factor also controlling itaconic acid yield. In summary, an itaconic acid titer of 34 g/L with a total productivity of up to 0.07 g/L/h and a yield of 0.16 g/g could be reached during fed-batch cultivation. CONCLUSION This study demonstrates the feasibility of consortium-based CBP for itaconic acid production and also lays the fundamentals for the development and improvement of similar microbial consortia for cellulose-based organic acid production.
Collapse
Affiliation(s)
- Ivan Schlembach
- Leibniz Institute for Natural Product Research and Infection Biology – Hans-Knöll-Institute, Jena, Germany
- Faculty of Biological Sciences, Friedrich-Schiller-University, Jena, Germany
| | - Hamed Hosseinpour Tehrani
- Institute of Applied Microbiology - iAMB, Aachen Biology and Biotechnology - ABBt, RWTH Aachen University, Aachen, Germany
| | - Lars M. Blank
- Institute of Applied Microbiology - iAMB, Aachen Biology and Biotechnology - ABBt, RWTH Aachen University, Aachen, Germany
| | - Jochen Büchs
- AVT‑Biochemical Engineering, RWTH Aachen University, Aachen, Germany
| | - Nick Wierckx
- Institute of Applied Microbiology - iAMB, Aachen Biology and Biotechnology - ABBt, RWTH Aachen University, Aachen, Germany
- Institute of Bio- and Geosciences IBG-1: Biotechnology, Forschungszentrum Jülich, Jülich, Germany
| | - Lars Regestein
- Leibniz Institute for Natural Product Research and Infection Biology – Hans-Knöll-Institute, Jena, Germany
| | - Miriam A. Rosenbaum
- Leibniz Institute for Natural Product Research and Infection Biology – Hans-Knöll-Institute, Jena, Germany
- Faculty of Biological Sciences, Friedrich-Schiller-University, Jena, Germany
| |
Collapse
|
19
|
Yeast Biotechnology 3.0. FERMENTATION 2020. [DOI: 10.3390/fermentation6030075] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
This Special Issue is a continuation of the first and second “Yeast Biotechnology” Special Issue series of the journal Fermentation (MDPI) [...]
Collapse
|
20
|
Papadopoulos L, Kluge M, Bikiaris DN, Robert T. Straightforward Synthetic Protocol to Bio-BasedUnsaturated Poly(ester amide)s from Itaconic Acidwith Thixotropic Behavior. Polymers (Basel) 2020; 12:polym12040980. [PMID: 32331487 PMCID: PMC7240367 DOI: 10.3390/polym12040980] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2020] [Revised: 04/18/2020] [Accepted: 04/19/2020] [Indexed: 11/17/2022] Open
Abstract
In the field of polymer chemistry, tremendous efforts have been made over the last decade to replace petrochemical monomers with building blocks from renewable resources. In this respect, itaconic acid has been used as an alternative to acrylic acid or maleic acid in unsaturated polyesters for thermal or UV-curing applications. However, examples of poly(ester amide)s from itaconic acid are scarce. Under standard polycondensation reactions, the presence of free amines leads to aza-Michael addition reactions at the α,β-unsaturated double bond of the itaconic acid and isomerization reactions to mesaconic acid. Both reactions make the resulting materials useless as UV-curing polymer resins. To avoid these undesired side reactions, we herein report the use of preformed, well-defined diols containing internal amide bonds. The resulting unsaturated poly(ester amide) resins were analyzed before and after UV-induced crosslinking. Viscosity measurements revealed a strong thixotropic behavior induced by the amide groups, which is usually not detected in structurally similar polyester resins.
Collapse
Affiliation(s)
- Lazaros Papadopoulos
- Laboratory of Polymer Chemistry and Technology, Department of Chemistry, Aristotle University of Thessaloniki, GR-541 24 Thessaloniki, Greece; (L.P.); (D.N.B.)
| | - Marcel Kluge
- Fraunhofer Institute for Wood Research—Wilhelm-Klauditz-Institut WKI, Bienroder Weg 54E, 38108 Braunschweig, Germany;
- Institute for Chemistry of Renewable Resources, Department of Chemistry, University of Natural Resources and Life Sciences Vienna, Konrad-Lorenz-Straße 24, 3430 Tulln, Austria
| | - Dimitrios N. Bikiaris
- Laboratory of Polymer Chemistry and Technology, Department of Chemistry, Aristotle University of Thessaloniki, GR-541 24 Thessaloniki, Greece; (L.P.); (D.N.B.)
| | - Tobias Robert
- Fraunhofer Institute for Wood Research—Wilhelm-Klauditz-Institut WKI, Bienroder Weg 54E, 38108 Braunschweig, Germany;
- Correspondence: ; Tel.: +49-531-2155-357
| |
Collapse
|
21
|
First Example of Unsaturated Poly(Ester Amide)s Derived From Itaconic Acid and Their Application as Bio-Based UV-Curing Polymers. APPLIED SCIENCES-BASEL 2020. [DOI: 10.3390/app10062163] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
Recently, itaconic acid has drawn considerable attention as a novel radical-curing building block for polyester resins. These bio-based materials have been used in thermal, as well as ultra violet (UV) curing applications, such as printing inks or coatings. Poly(ester amide)s from itaconic acid could be very interesting, as the amide group could alter the properties of the resins as well as cured materials. However, standard polycondensation reactions with diamines are not possible with itaconic acid as the amines preferably react via an aza-Michael addition at the α,β-unsaturated double bond. Therefore, alternative and more elaborate synthetic strategies have to be developed. Herein, we present two different synthetic strategies to poly(ester amide)s from itaconic acid that circumvent the addition reaction of the amines. This is in both cases done by a pre-reaction to form stable amide building blocks that are then reacted with itaconic acid or polyesters derived thereof. The structural composition and the properties of the resin are characterized, and the UV-curing reactivity is examined. All properties are compared to corresponding polyesters from itaconic acid.
Collapse
|