High Hydrostatic Pressure Induced Changes in the Physicochemical and Functional Properties of Milk and Dairy Products: A Review

Impact of high-pressure processing on the bioactive compounds of milk - A comprehensive review

High-pressure processing (HPP) is a promising alternative to thermal pasteurization. Recent studies highlighted the effectivity of HPP (400-600 MPa and exposure times of 1-5 min) in reducing pathogenic microflora for up to 5 logs. Analysis of modern scientific sources has shown that pressure affects the main components of milk including fat globules, lactose, casein micelles. The behavior of whey proteins under HPP is very important for milk and dairy products. HPP can cause significant changes in the quaternary (> 150 MPa) and tertiary (> 200 MPa) protein structures. At pressures > 400 MPa, they dissolve in the following order: αs2-casein, αs1-casein, k-casein, and β-casein. A similar trend is observed in the processing of whey proteins. HPP can affect the rate of milk fat adhering as cream with increased results at 100-250 MPa with time dependency while decreasing up to 70% at 400-600 MPa. Some studies indicated the lactose influencing casein on HP, with 10% lactose addition in case in suspension before exposing it to 400 MPa for 40 min prevents the formation of large casein micelles. Number of researches has shown that moderate pressures (up to 400 MPa) and mild heating can activate or stabilize milk enzymes. Pressures of 350-400 MPa for 100 min can boost the activity of milk enzymes by up to 140%. This comprehensive and critical review will benefit scientific researchers and industrial experts in the field of HPP treatment of milk and its effect on milk components.

Graphical abstract

Impact of high-pressure processing on hemolymph, color, lipid globular structure and oxidation of the edible portion of blood clams

Impact of high-pressure processing (HP-P) on hemolymph and lipid globular structures of the edible portion (EP) of blood clams (BC) was investigated. HP-P above 400 MPa decreased heme iron content, while upsurged non-heme iron content. Increasing pressure induced gaps and abnormal hemocyte cell arrangements. However, HP-P at 300 MPa improved and maintained total hemocyte counts, the heme iron content, and a*-value in BC-EP. For lipid globular structures, the mean diameter drastically decreased when an HP-P pressure of 600 MPa was employed. HP-P at higher pressure induced lipid oxidation, along with decreases in monounsaturated and polyunsaturated fatty acids as well as increases in thiobarbituric acid reactive substances and peroxide value. FTIR spectra displayed a reduction in phosphate groups and cis double bonds in lipids from HP-P treated BC, compared to controls. Therefore, HP-P at 300 MPa is recommended for preparing ready-to-cook BC with less tissue damage and lipid oxidation.

Breast milk preservation: thermal and non-thermal processes and their effect on microorganism inactivation and the content of bioactive and nutritional compounds

Human Breast Milk (HBM) is widely acknowledged as the best nutritional source for neonates. Data indicates that, in 2019, 83.2% of infants in the United States received breast milk at birth, slightly reducing to 78.6% at 1 month. Despite these encouraging early figures, exclusive breastfeeding rates sharply declined, dropping to 24.9% by 6 months. This decline is particularly pronounced when direct breastfeeding is challenging, such as in Neonatal Intensive Care Units (NICU) and for working mothers. Given this, it is vital to explore alternative breast milk preservation methods. Technologies like Holder Pasteurization (HoP), High-Temperature Short-Time Pasteurization (HTST), High-Pressure Processing (HPP), UV radiation (UV), and Electric Pulses (PEF) have been introduced to conserve HBM. This review aims to enhance the understanding of preservation techniques for HBM, supporting the practice of extended exclusive breastfeeding. It explicitly addresses microbial concerns, focusing on critical pathogens like Staphylococcus aureus, Enterococcus, Escherichia coli, Listeria monocytogenes, and Cytomegalovirus, and explores how various preservation methods can mitigate these risks. Additionally, the review highlights the importance of retaining the functional elements of HBM, particularly its immunological components such as antibodies and enzymes like lysozyme and Bile Salt Stimulated Lipase (BSSL). The goal is to provide a comprehensive overview of the current state of HBM treatment, critically assess existing practices, identify areas needing improvement, and advocate for extended exclusive breastfeeding due to its vital role in ensuring optimal nutrition and overall health in infants.

Regulation of the Ice Ⅰ to Ice III high pressure phase transition meta-stability in milk and its bactericidal effects

This study was focused on a novel approach of creating perturbations under high pressure (HP) meta-stable Ice Ⅰ to Ice Ⅲ phase transition and its bactericidal effects. Experiments were carried out under subzero high pressure processing conditions using Escherichia coli suspended in milk, and the microbial inactivation before and after the meta-stable state regulation was compared. The phase transition position of unperturbed milk was 302 MPa/-37.5 °C. The volume change resulting from the phase transition was employed as the perturbation mechanism. Glucose (5 %, 20 %) and sodium chloride solutions (5 %, 20 %) were used as regulatory sources. Glucose solutions accelerated the phase change of the milk better than the sodium chloride solution and resulted in an optimum phase transition position of milk at 243 MPa/-30.6 °C. The induced perturbations accelerated meta-stable transformation and enhanced the microbial destruction. At 330 MPa/3s, compared to the unfrozen samples, the lethality of E. coli in the frozen-regulated samples significantly increased by 1.79 log. The relationship between the E. coli inactivation within the phase change pressure range and the pressure was not continuous, but a segmented one, both before and after meta-stable state regulation. A higher level of E. coli destruction was accomplished by a 5 min pressure-holding of frozen samples at 220 MPa and 280 MPa as compared to the one-pulse and two-pulses treatments without holding time. The maximum lethality of 6.73 log was achieved at 280 MPa/5 min in the frozen-regulated application.

Behavior of enzymes under high pressure in food processing: mechanisms, applications, and developments

High pressure processing (HPP) offers the benefits of safety, uniformity, energy-efficient, and low waste, which is widely applied for microbial inactivation and shelf-life extension for foods. Over the past forty years, HPP has been extensively researched in the food industry, enabling the inactivation or activation of different enzymes in future food by altering their molecular structure and active site conformation. Such activation or inactivation of enzymes effectively hinders the spoilage of food and the production of beneficial substances, which is crucial for improving food quality. This paper reviews the mechanism in which high pressure affects the stability and activity of enzymes, concludes the roles of key enzymes in the future food processed using high pressure technologies. Moreover, we discuss the application of modified enzymes based on high pressure, providing insights into the future direction of enzyme evolution under complex food processing conditions (e.g. high temperature, high pressure, high shear, and multiple elements). Finally, we conclude with prospects of high pressure technology and research directions in the future. Although HPP has shown positive effects in improving the future food quality, there is still a pressing need to develop new and effective combined processing methods, upgrade processing modes, and promote sustainable lifestyles.

Effect of the Application of Ultrasound to Homogenize Milk and the Subsequent Pasteurization by Pulsed Electric Field, High Hydrostatic Pressure, and Microwaves

The efficacy of applying ultrasound (US) as a system to homogenize emulsions has been widely demonstrated. However, research has not yet shown whether the effect achieved by homogenizing milk with US is modified by subsequent pasteurization treatments that use new processing technologies such as pulsed electric fields (PEF), microwaves (MW), and high hydrostatic pressure (HPP). The aim of this study was, therefore, to optimize the application of US for milk homogenization and to evaluate the effect of PEF, HPP, and MW pasteurization treatments on the sensorial, rheological, and microbiological properties of milk throughout its shelf life. To homogenize whole milk, a continuous US system (20 kHz, 0.204 kJ/mL, 100%, 40 °C) was used, and different ultrasonic intensities (0.25, 0.5, and 1.0 kJ/mL) were evaluated. The optimal ultrasonic treatment was selected on the basis of fat globule size distribution and pasteurization treatments by MW (5800 W, 1.8 L/min), PEF (120 kJ/kg, 20 kV/cm) and HPP (600 MPa, 2 min, 10 °C) was applied. The ultrasound intensity that achieved the highest reduction in fat globule size (0.22 ± 0.02 µm) and the most homogeneous distribution was 1.0 kJ/mL. Fat globule size was smaller than in commercial milk (82% of volume < 0.5 µm for US milk versus 97% of volume < 1.2 µm for commercial milk). That size was maintained after the application of the different pasteurization treatments, and the resulting milk had better emulsion stability than commercial milk. After 28 days of storage, no differences in viscosity (4.4–4.9 mPa s) were observed. HPP pasteurization had the greatest impact on color, leading to higher yellowness values than commercial milk. Microbial counts did not vary significantly after 28 days of storage, with counts below 102 CFU/mL for samples incubated at 15 °C and at 37 °C. In summary, the homogenization of milk obtained by US was not affected by subsequent pasteurization processes, regardless of the technology applied (MW, PEF, or HPP). Further research is needed to evaluate these procedures’ effect on milk’s nutritional and functional properties.

Application of HPP for the Development of a Dessert Elaborated with Casein and Cocoa for a Dysphagia Diet

In this study, the application of high-pressure processing (HPP) for optimizing the texture of a cocoa dessert rich in casein and developed for people with dysphagia was investigated. Different treatments (250 MPa/15 min; 600 MPa/5 min) and protein concentrations (10-15%) were combined and evaluated for choosing the optimum combination leading to an adequate texture. The selected formulation was a dessert containing 4% cocoa and 10% casein and subjected to 600 MPa for 5 min. It showed a high nutritional value (11.5% protein) and high antioxidant capacity, which was slightly affected by the HPP processing. The rheological and textural properties showed that HPP had a clear effect on the dessert structure. The loss tangent decreased from 2.692 to 0.165, indicating the transition from a liquid to a gel-like structure, which is in a suitable range for dysphagia foods. During storage (14 and 28 days at 4 °C), progressive significant changes in the structure of the dessert were observed. A decrease in all rheological and textural parameters occurred, except for the loss of tangent, which increased its value. In any case, at 28 days of storage, samples maintained the weak gel-like structure (0.686 loss tangent) that is acceptable for dysphagia management.

Comparison of the Effects of High Hydrostatic Pressure and Pasteurization on Quality of Milk during Storage

High hydrostatic pressure (HHP, 600 MPa/15 min), pasteurization (72 °C/15 s) and pasteurization-HHP (72 °C/15 s + 600 MPa/15 min) processing of milk were comparatively evaluated by examining their effects on microorganisms and quality during 30 days of storage at 4 °C. The counts of total aerobic bacteria in HHP-treated milk were less than 2.22 lgCFU/mL during storage, while they exceeded 5.00 lgCFU/mL in other treated milk. Although HHP changed the color, it had more advantages in maintaining the nutrient (fat, calcium and β-lactoglobulin) properties of milk during storage. Moreover, the viscosity and particle size of HHP-treated milk were more similar to the untreated milk during storage. However, consumer habits towards heat-treated milk have led to poor acceptance of HHP-treated milk, resulting in a low sensory score. In sum, compared with pasteurization- and pasteurization-HHP-treated milk, HHP-treated milk showed longer shelf life and better nutritional quality, but lower sensory acceptance.

High-pressure processing of bovine milk: Effects on the coagulation of protein and fat globules during dynamic in vitro gastric digestion

The effect of high-pressure processing (HPP) on the digestion behavior of skim and whole bovine milks was investigated using a human gastric simulator. Both milks formed clots during gastric digestion. HPP treatment led to the formation of a coagulum with a fragmented and crumbled structure, compared with the coagulum formed from untreated milk. At pressures over 400 MPa, more intense pressure resulted in looser and more fragmented gastric clot structures. The weight of the dried clots and the moisture content in the clots of the skim milk treated at 600 MPa were significantly lower and higher than that of untreated skim milk, respectively. The looser and more fragmented gastric clot structures consequently led to faster hydrolysis of the proteins by pepsin during gastric digestion. The denaturation of the whey proteins induced by HPP may have also altered the resistance of α-lactalbumin and β-lactoglobulin in the HPP-treated milk samples to pepsin hydrolysis. This study provides insights into the differences among untreated skim milk, untreated whole milk and HPP-treated milk under in vitro gastric digestion conditions. The structure of the clots formed in the gastric environment affects their breakdown and consequently their emptying rate into the intestine.

Factors affecting the modification of bovine milk proteins in high hydrostatic pressure processing: An updated review

High hydrostatic pressure (HHP) treatment induces structural changes in bovine milk proteins depending on factors such as the temperature, pH, concentration, decompression rate, cycling, composition of the medium and pressure level and duration. An in-depth understanding of the impact of these factors is important for controlling HHP-induced modification of milk proteins and the interactions within or between them, which can be applied to prevent undesired aggregation, gelation, and precipitation during HHP processing or to obtain specific milk protein modifications to attain specific protein properties. In this regard, understanding the influences of these factors can provide insight into the modulation and optimization of HHP conditions to attain specific milk protein structures. In recent years, there has been a great research attention on HHP-induced changes in milk proteins influenced by factors such as pH, temperature, concentration, cycling, decompression condition, and medium composition. Hence, to provide insight into how these factors control milk protein structures under HHP treatment and to understand if their effects depend on HHP parameters and environmental conditions, this review discusses recent findings on how various factors (pH, temperature, cycling, decompression rate, medium composition, and concentration) affect HHP-induced bovine milk protein modification. Practical Application: The information provided in this review will be very useful to anticipate the challenges related to the formulation and development of pressure-treated milk and dairy products.

Evolution of Preterm Infant Nutrition from Breastfeeding to an Exclusive Human Milk Diet: A Review

The benefits of feeding human milk to human infants are well-established. Preterm infants, particularly those born with very low birthweight (VLBW; <1,500 g), are a uniquely vulnerable population at risk for serious, life-threatening complications as well as disruptions in normal growth and development that can affect their lives into adulthood. Feeding VLBW preterm infants an exclusive human milk diet (EHMD) from birth that consists of the mother's own milk or donor human milk plus a nutritional fortifier made exclusively from human milk has been associated with a reduction in morbidity and mortality and improved early growth and developmental metrics. Preliminary evidence suggests that the health benefits of adopting an EHMD (or avoiding cow milk products) early in life may last into adulthood. This review briefly summarizes the history of breastfeeding and describes the available evidence on the benefits of an EHMD among VLBW preterm infants as well as the importance of high-quality manufacturing standards for producing safe and effective human milk-based products.

Sensory Analysis for Cow Milk Product Development Using High Pressure Processing (HPP) in the Dairy Industry

High pressure processing (HPP) can be applied as an alternative thermal treatment of milk to maintain its natural and original sensory quality. Milk was processed at 600 MPa for 10 min or given thermal treatment at 125 °C for 4 s. Sensory evaluation of treated milk samples was conducted using the triangle and the acceptance and preference tests. The triangle test was used as a discriminative test to check whether there was a noticeable difference between both treated milk samples. The acceptance and preference test determined attributes of milk including colour, milkiness, creaminess, mouthfeel, and aftertaste based on the 5-point just-about-right (JAR) scale. In the triangle test, 89.5% of panellists were able to identify the odd sample and differentiate milk processed using high pressure from heat treatment. For the acceptance and preference test, 61% of panellists gave higher overall preference for the high pressure processed milk over heat-treated milk. The JAR evaluation showed no significant differences (p > 0.05) in all evaluated milk attributes which included milkiness, creaminess, mouthfeel, and aftertaste, with the exception of colour. Overall, high pressure processed milk scored better in terms of organoleptic properties as the penalty value for most attributes including colour, milkiness, mouthfeel, and aftertaste were lower than the penalty of heat-treated milk, except for creaminess. Therefore, to improve the acceptance and preference of high pressure processed milk, future development needs to focus on increasing creaminess of high pressure processed milk.