Development and Characterization of Extrudates Based on Rapeseed and Pea Protein Blends Using High-Moisture Extrusion Cooking

Structural and functional properties of a high moisture extruded mixture of pea proteins (Pisum sativum), amaranth flour (Amaranthus hypochondriacus), and oat flour (Avena sativa)

Textured vegetable proteins (TVP) are an alternative to meet the increasing demand for non-animal food. This study aimed to develop a TVP from mixtures with 45 % pea protein isolate (PPI) enriched with amaranth (AF) and oat (OF) flours using high-moisture extrusion technology (HME) varying the moisture (50-70 %) and the temperature in the second heating zone of the extruder (110-140 °C). After extrusion, all samples demonstrated higher values of water absorption capacity (WAC) than non-extruded mixtures. Mixture of AF:OF:PPI (40:15:45 %) extruded at 60 % moisture and 135 °C showed promising functional properties with WAC and WSI values of 3.2 ± 0.2 g H2O/g and 24.89 ± 2.31 %, respectively, and oil absorption capacity (OAC) of 1.3 g oil/g. The extrusion process altered the thermal and structural properties of proteins promoting a desirable fibrous structure. This confirms the feasibility of using HME to develop TVP based on PPI, AF, and OF.

Development and Comparative Evaluation of Imitated Fiber from Different Protein Sources Using Wet-Spinning

Texture is a major challenge in addressing the need to find sustainable meat alternatives, as consumers desire alternative meat to have a sensory profile like meat. In this study, the fabrication of imitated muscle fiber (IMF) is performed by introducing different kinds of protein sources, with an effective bottom-up technique- wet spinning. Herein, the protein sources (pea protein isolate, wheat protein, and myofibrillar paste) were combined with sodium alginate to stimulate the bonding with the coagulation solution for fabrication. It has been found that the fabrication of IMF is possible using all the protein sources, however, due to the difference in protein structure, a significant difference was observed in quality characteristics compared to conventional meat. Additionally, combination of wheat protein and pea protein isolate has given similar values as conventional meat in terms of some of the texture profiles and Warner-Bratzler shear force. In general, the optimization of protein sources for wet spinning can provides a novel way for the production of edible fiber of alternative meat.

Study of the Preparation and Properties of Chemically Modified Materials Based on Rapeseed Meal

In recent years, there has been increasing interest in developing novel materials based on natural biopolymers as a renewable alternative to petroleum-based plastics. The availability of proteins derived from agricultural by-products, along with their favourable properties, has fostered a renewed interest in protein-based materials, promoting research in innovative technologies. In this study, we propose the use of rapeseed protein-rich meal as the main ingredient for the preparation of novel sustainable materials combining excellent environmental properties such as biodegradability and renewability. The application of sustainable products in the present high-tech society requires the modification of the basic native properties of these natural compounds. The original route proposed in this paper consists of preparation via the compression moulding of flexible biomaterials stabilized by crosslinkers/chain extenders. An investigation of the effects of different denaturing and disulfide bond reducing agents, crosslinkers, and preparation conditions on the material mechanical behaviour demonstrated that the novel materials have appreciable strength and stiffness. The results show the potential of utilizing full meal from vegetable by-products to prepare protein-based materials with guaranteed ecofriendly characteristics and mechanical properties adequate for specific structural applications.

High-Moisture Extrusion of Plant Proteins: Fundamentals of Texturization and Applications

The growing demand for sustainable and healthy food alternatives has led to a significant increase in interest in plant-based protein products. Among the various techniques used in creating meat analogs, high-moisture extrusion (HME) stands out as a promising technology for developing plant-based protein products that possess desirable texture and mouthfeel. During the extrusion process, plant proteins undergo a state transition, causing their rheological properties to change, thereby influencing the quality of the final extrudates. This review aims to delve into the fundamental aspects of texturizing plant proteins using HME, with a specific focus on the rheological behavior exhibited by these proteins throughout the process. Additionally, the review explores the future of HME from the perspective of novel raw materials and technologies. In summary, the objective of this review is to provide a comprehensive understanding of the potential of HME technology in the development of sustainable and nutritious plant-based protein products.

Dairy, Plant, and Novel Proteins: Scientific and Technological Aspects

Alternative proteins have gained popularity as consumers look for foods that are healthy, nutritious, and sustainable. Plant proteins, precision fermentation-derived proteins, cell-cultured proteins, algal proteins, and mycoproteins are the major types of alternative proteins that have emerged in recent years. This review addresses the major alternative-protein categories and reviews their definitions, current market statuses, production methods, and regulations in different countries, safety assessments, nutrition statuses, functionalities and applications, and, finally, sensory properties and consumer perception. Knowledge relative to traditional dairy proteins is also addressed. Opportunities and challenges associated with these proteins are also discussed. Future research directions are proposed to better understand these technologies and to develop consumer-acceptable final products.

Effect of peptide formation during rapeseed fermentation on meat analogue structure and sensory properties at different pH conditions

This study aimed to modify the sensory properties of rapeseed protein concentrate using a combination of fermentation and high-moisture extrusion processing for producing meat analogues. The fermentation was carried out with Lactiplantibacillus plantarum and Weissella confusa strains, known for their flavour and structure-enhancing properties. Contrary to expectations, the sensory evaluation revealed that the fermentation induced bitterness and disrupted the fibrous structure formation ability due to the generation of short peptides. On the other hand, fermentation removed the intensive off-odour and flavour notes present in the native raw material. Several control treatments were produced to understand the reasons behind the hindered fibrous structure formation and induced bitterness. The results obtained from peptidomics, free amino ends, and solubility analyses strongly indicated that the proteins were hydrolysed by endoproteases activated during the fermentation process. Furthermore, it was suspected that the proteins and/or peptides formed complexes with other components, such as hydrolysis products of glucosinolates and polysaccharides.

Comparison of the specific mechanical energy, specific thermal energy, and functional properties of cold and hot extruded pea protein isolate

Pea protein is a popular source of plant-based protein, though its application in meat and dairy analog products is still lacking. This is particularly true in the development of products with fatty and creamy textures. Cold denaturation may be a way to induce these types of textures in food since this is a universal phenomenon in protein that occurs due to a weakening of hydrophobic interactions at cold temperatures. This work utilizes a single screw extruder to systematically study the impacts of moisture content (50-65 %) and pH (2,4.5,8) on the outlet temperatures, specific mechanical energy, specific thermal energy, and texture of cold-extruded pea protein. It was found that at pH 2 and moistures of 60 % and greater, the temperature of the product exiting the extruder is <5.5 °C, and also produced 13.7 %-36.5 % more specific thermal energy, indicating the occurrence of cold denaturation in these products. Based on these findings, a comparison of hot and cold extrusion was conducted as a function of pH and oil content. It was found that cold extrusion imparts 43.0 %-56.2 % more mechanical energy into the protein than hot extrusion, and the cold extruded protein had higher values of Young's modulus and breaking stress. The protein extruded at low temperatures was also able to bind 32.93 % more oil than hot extruded proteins when extruded with 10 % added oil, which may aid in the formation of protein-based fat memetics for the food industry.

Evaluating the potential of millets as blend components with soy protein isolate in a high moisture extrusion system for improved texture, structure, and colour properties of meat analogues

This study explored the use of millets flours as a secondary ingredient with soy protein isolate (SPI) to develop fibrous high moisture meat analogue (HMMA). Three millets (sorghum, pearl millet, and finger millet) with three incorporation levels (10%, 20%, and 30%) were extruded at 60%, 65%, and 70% moisture content. The results showed that millet type, incorporation level, and moisture content significantly influenced the system parameters and textural properties. Good visual texturization was achieved at addition of pearl millet up to 30% incorporation level and sorghum and finger millet up to 20% incorporation level. Furthermore, the textural properties of HMMA made from SPI-millet blends were compared against HMMA made from SPI-gluten blend and real chicken. The HMMA made from SPI-millet flour had lower hardness, chewiness, resilience, springiness, tensile strength, cutting strength than that for SPI and SPI-wheat gluten blend and were much closer to corresponding values for real chicken. The results also showed that each of the three millet types generated distinctly different fibre patterns (thick to thin fibres) and colour (whiter to darker) of HMMA. Thus, HMMA produced from SPI-millet flour blends can offer a wide textural, fibre pattern and colour space for different plant-based meat applications. Since millets do not have gluten, they also offer an opportunity to make gluten-free HMMA's.

Effects of Feed Moisture Content on the Physical and Nutritional Quality Attributes of Sunflower Meal-based High-Moisture Meat Analogues

Adding value to food industry by-products, like sunflower meal (SFM), through their utilization as ingredients in new food products can improve sustainability of food systems. This research investigated extrusion cooking to produce high-moisture meat analogues (HMMAs) made from blends of soy protein isolate and expeller-pressed SFM. The effects of feed moisture content [FMC] (60, 65, and 70%, wet basis) and SFM concentration (37.5, 50, and 62.5%, total blend weight basis) on physical and protein nutritional quality attributes of HMMAs were investigated. The processing temperatures (including cooling die), screw speed and feed rate were kept constant at 60-80-115-125-50-25 °C (from feeder to the die end), 200 rpm and 0.5 kg/h (dry basis), respectively. An increase in SFM concentration and FMC significantly (p < 0.05) reduced the mechanical energy requirements for extrusion. Cutting strength and texture profile analysis of HMMAs indicated softer texture with increases in SFM and FMC. X-ray microcomputed tomography analysis revealed that the microstructure of the HMMAs at the centre and towards the surface was different and affected by SFM concentration and FMC. The in vitro-protein digestibility corrected amino acid score of the HMMAs ranged between 85 and 91% and did not show significant (p < 0.05) changes as a function of FMC or SFM concentration. HMMAs produced from 37.5% SFM at 70% FMC showed no deficiency in essential amino acids for all age categories except for infants, suggesting the high potential of SFM and soy protein blends for creating nutritious meat alternative products. Overall, this work provided valuable insights regarding the effects of soy protein replacement by SFM on the textural, microstructural and nutritional quality of HMMA applications, paving the way for value-addition to this underutilized food industry by-product.

High moisture extrusion of plant proteins: advances, challenges, and opportunities

High moisture extrusion is a widely used technology for producing fibrous meat analogues in an efficient and scalable manner. Extrusion of soy, wheat gluten, and pea is well-documented and related products are already available in the market. There has been growing interest to diversify the protein sources used for meat analogues due to concerns over food waste, monocropping and allergenicity. Optimizing the extrusion process for plant proteins (e.g., hemp, mung bean, fava bean) tends to be time consuming and relies on the operators' intuition and experience to control the process well. Simulating the extrusion process has been challenging so far due to the diverse inputs and configurations involved during extrusion. This review details the mechanism for fibrous structure formation and provides an overview of the extrusion parameters used for texturizing a broad range of plant protein sources. Referring to these data reduces the resources needed for optimizing the extrusion process for novel proteins and may be useful for future extrusion modeling efforts. The review also highlights potential challenges and opportunities for extruding plant proteins, which may help to accelerate the development and commercialization of related products.

The development process of plant-based meat alternatives: raw material formulations and processing strategies

With the rapid growth of the world's population, the demand for meat is gradually increasing. The emergence and development of plant-based meat alternatives (PBMs) offer a good alternative to solve the environmental problems and disease problems caused by the over-consumption of meat products. Soybean is now the primary material for the production of PBMs due to its excellent gelation properties, potential from fibrous structure, balanced nutritional value, and relatively low price. Extrusion is the most widely used process for producing PBMs, and it has a remarkable effect on simulating the fibrous structure of real meat products. However, interactions related to phase transitions in protein molecules or fibrous structures during extrusion remain a challenge. Currently, PBMs do not meet people's demand for realistic meat in terms of texture, taste, and flavor. Therefore, the objectives of this review are to explore how to improve fiber structure formation in terms of raw material formulation and processing technology. Factors to improve the taste and texture of PBMs are summarized in terms of optimizing process parameters, changing the composition of raw materials, and enriching taste and flavor. It will provide a theoretical basis for the future development of PBMs.

Investigating the Potential of Full-Fat Soy as an Alternative Ingredient in the Manufacture of Low- and High-Moisture Meat Analogs

The increase in meat consumption could adversely affect the environment. Thus, there is growing interest in meat analogs. Soy protein isolate is the most common primary material to produce low- and high-moisture meat analogs (LMMA and HMMA), and full-fat soy (FFS) is another promising ingredient for LMMA and HMMA. Therefore, in this study, LMMA and HMMA with FFS were manufactured, and then their physicochemical properties were investigated. The water holding capacity, springiness, and cohesiveness of LMMA decreased with increasing FFS contents, whereas the integrity index, chewiness, cutting strength, degree of texturization, DPPH free radical scavenging activity, and total phenolic content of LMMA increased when FFS contents increased. While the physical properties of HMMA decreased with the increasing FFS content, its DPPH free radical scavenging activity and total phenolic contents increased. In conclusion, when full-fat soy content increased from 0% to 30%, there was a positive influence on the fibrous structure of LMMA. On the other hand, the HMMA process requires additional research to improve the fibrous structure with FFS.

Recent Advances in the Processing and Manufacturing of Plant-Based Meat

Plant protein technology is a core area of biotechnology to ease the problem of human protein demand. Plant-based meat based on plant protein technology is a growing concern by global consumers in alleviating environmental pollution, cutting down resources consumption, and improving animal welfare. Plant-based meat simulates the texture, taste, and appearance of animal meat by using protein, lipid, carbohydrate, and other plant nutrients as the main substances. This review summarizes the main components of plant-based meat, processing technology, standard formula, market competition, and formula and texture of future research directions. According to the existing methods of plant-based meat fiber forming, the development process and characteristics of four production processes and equipment of plant-based meat spinning, extrusion, shearing, and 3D printing are emphatically expounded. The processing principles and methods of different processing technologies in plant-based meat production are summarized. The production process and equipment of plant-based meat will pay more attention to the joint production of various processes to improve the defects of plant-based meat production process.

Plant-Based Meat Analogues from Alternative Protein: A Systematic Literature Review

This study aimed to conduct a systematic literature review (SLR) of the research performed in the plant-based meat analogues area. Historical, current, and future tendencies are discussed. The paper offers a comprehensive SLR coupled with a bibliometric analysis of the publication from 1972 to January 2022. The articles were obtained using a research string and precise inclusion and exclusion criteria from two prominent databases, Scopus and Web of Science (WoS). The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) flow technique was used to describe the data screening and selection. In total, 84 publications were selected for further analysis after a thorough literature assessment. From this study, six main themes were identified: (1) objectives of the study; (2) type of plant protein; (3) product type; (4) added ingredients; (5) texturization technique; and (6) quality assessment considered in the studies. Recent trends in publication imply that meat analogue technology is gaining prominence. This review revealed significant research on improving meat analogues via texturization. Even though extrusion is used industrially, the technique is still in its infancy and needs improvement. Future studies should focus more on fiber and protein-protein interactions, macromolecule conformation and mechanisms, diversifying or improving current methods, sensory attributes, and gastrointestinal absorption rate of each novel protein ingredient.