Copper-Modified Double-Emission Carbon Dots for Rapid Detection of Thiophanate Methyl in Food

Copper-based fluorescent nanozyme used to construct a ratiometric sensor for visual detection of thiophanate methyl

Although nanozyme has shown great potential in designing fluorescent assays for pesticide residue, most of them are based on single emission, thus affecting the detection accuracy. Herein, a copper-based fluorescent nanozyme (Cu-BH) synthesized with dual-ligand, integrating fluorescence and oxidase-mimic into one spherical nanomaterial, was used firstly to establish a ratiometric approach for visual detection of thiophanate methyl (TM). Cu-BH possesses excellent oxidase-like activities, triggering the oxidation of colorless o-phenylenediamine (OPD) into yellow luminescent products (oxOPD, λem = 564 nm). Besides, the ligand of 2-amino-1,4-benzene-dicarboxylic acid imparts Cu-BH blue fluorescence (λem = 425 nm), which is quenched by oxOPD via inner filtration effect (IFE). The introduction of TM can prevent not only the oxidase-like activity remarkably but also the intrinsic luminescence of Cu-BH slightly because of the complexation of TM with Cu2+. As a result, the fluorescence intensity at 564 nm and 425 nm presents a significant decrease and a slight increase, respectively, producing a ratiometric fluorescent signal (F425/F564). Therefore, a novel ratiometric fluorescent strategy has been proposed to detect TM ranging from 0.1 to 100 μM with detection limit of 0.03 μM (S/N = 3). Besides, visual detection of TM can be achieved by RGB reading with the assistance of smartphone owing to the color variation from yellow to blue. This fluorescent nanozyme-based ratiometric strategy provides a specific method for the detection of TM in food samples.

Sensitive and selective colorimetric detection of thiophanate-methyl based on a novel Ru-Fe3O4 nanozyme with enhanced peroxidase-like activity

A novel Ru-Fe3O4 nanozyme with enhanced peroxidase-like (POD-like) activity was synthesized through a hydrothermal method. Ru-Fe3O4 nanozyme was effectively utilized for the detection of thiophanate-methyl (TM) using a colorimetric technique. The POD-like activity of Ru-Fe3O4 was found to be superior compared to Fe3O4, Rh-Fe3O4, and Pd-Fe3O4. Ru-Fe3O4 provided excellent POD-like activity with Michaelis constants of 0.00645 mM and 0.66714 mM for substrates of 3,3',5,5'-tetramethylbenzidine and H2O2, respectively. The density functional theory calculation showed that Ru-Fe3O4 had better H2O2 decomposition reactivity compared to Fe3O4. Compared with Fe3O4, the adsorbed H2O2 molecules underwent decomposition more readily on the Ru-Fe3O4 catalytic surface facilitating the occurrence of the H2O2 catalytic reaction, further suggesting the excellent POD-like activity of Ru-Fe3O4. The coordination and electrostatic interactions of Ru-Fe3O4 and TM promoted their binding, contributing to TM covering Ru-Fe3O4 catalytic site and inhibiting the POD-like activity of Ru-Fe3O4. As a result, the sensitive and selective detection of TM using Ru-Fe3O4 by a colorimetric method was achieved. The Ru-Fe3O4 nanozyme displayed a good linear correlation, with a linear detection range and a detection limit of 0.1-100 and 0.03 μg/mL, respectively. The Ru-Fe3O4 nanozyme was used for the determination of TM in soil and water samples with success.

Carbon Dots in Photodynamic Therapy: The Role of Dopant and Solvent on Optical and Photo-Responsive Properties

Carbon dots (CDs) are novel carbon-based luminescent materials with wide-ranging applications in biosensing, bioimaging, drug transportation, optical devices, and beyond. Their advantageous attributes, including biocompatibility, biodegradability, antioxidant activity, photostability, small particle size (<10 nm), and strong light absorption and excitation across a broad range of wavelengths, making them promising candidates in the field of photodynamic therapy (PDT) as photosensitizers (PSs). Further enhancements in functionality are imperative to enhance the effectiveness of CDs in PDT applications, notwithstanding their inherent benefits. Recently, doping agents and solvents have been demonstrated to improve CDs' optical properties, solubility, cytotoxicity, and organelle targeting efficiency. These improvements result from modifications to the CDs' carbon skeleton matrices, functional groups on the surface state, and chemical structures. This review discusses the modification of CDs with heteroatom dopants, dye dopants, and solvents to improve their physicochemical and optical properties for PDT applications. The correlations between the surface chemistry, functional groups, the structure of the CDs, and their optical characteristics toward quantum yield, redshift feature, and reactive oxygen species (ROS) generation, have also been discussed. Finally, the progressive trends for the use of CDs in PDT applications are also addressed in this review.

Smartphone-assisted carbon dots fluorescent sensing platform for visual detection of Thiophanate-methyl in fruits and vegetables

Trimesic acid and o-phenylenediamine (OPD) were employed as precursors to synthesize yellow-green fluorescent carbon dots (Y-G-CDs) by solvothermal synthesis for the sensitive detection of Thiophanate-methyl (TM) in real agricultural products. The Y-G-CDs probe could specifically recognize the TM primarily through π-π stacking. Moreover, the fluorescence quenching of the probe was ultimately dominated by the PET effect, based on the interaction between the abundant carboxyl groups on the surface of the Y-G-CDs and the amino group of TM. A strong linear relationship between the fluorescence quenching of the probe and TM concentration in the range of 0-10 µmol/L was observed and the limit of detection (LOD) was calculated to be 50.7 nmol/L. Compared to the interference pesticides, the Y-G-CDs probe demonstrated exceptional selectivity toward TM, with satisfactory recoveries of 96.3 % - 104.2 % in spiked food samples. The Y-G-CDs probe enables simple pretreatment, cost-effective, and on-site detection of TM in fruits and vegetables with visual detection of the TM employing a smartphone-assisted sensing platform.

MOF-based Ag NPs/Co3O4 nanozyme for colorimetric detection of thiophanate-methyl based on analyte-enhanced sensing mechanism

Silver nanoparticles supported on metal-organic framework (ZIF-67)-derived Co3O4 nanostructures (Ag NPs/Co3O4) were synthesized via a facile in situ reduction strategy. The resulting materials exhibited pH-switchable peroxidase/catalase-like catalytic activity. Ag NP doping greatly enhanced the catalytic activity of Ag NPs/Co3O4 towards 3,3',5,5'-tetramethylbenzidine (TMB) oxidation and H2O2 decomposition which were 59 times (A652 of oxTMB) and 3 times (A240 of H2O2) higher than that of ZIF-67, respectively. Excitingly, thiophanate-methyl (TM) further enhanced the peroxidase-like activity of Ag NPs/Co3O4 nanozyme due to the formation of Ag(I) species in TM-Ag NPs/Co3O4 and generation of more radicals resulting from strong interaction between Ag NPs and TM. The TM-Ag NPs/Co3O4 nanozyme exhibited lower Km and higher Vmax values towards H2O2 when compared with Ag NPs/Co3O4 nanozyme. A simple, bioelement-free colorimetric TM detection method based on Ag NPs/Co3O4 nanozyme via analyte-enhanced sensing strategy was successfully established with high sensitivity and selectivity. Our study demonstrated that hybrid noble metal NPs/MOF-based nanozyme can be a class of promising artificial nanozyme in environmental and food safety applications.

Specific detection of fungicide thiophanate-methyl: A smartphone colorimetric sensor based on target-regulated oxidase-like activity of copper-doped carbon nanozyme

Nanozyme-based colorimetric assays have shown great potential in the rapid and sensitive determination of pesticide residue in environment. However, the non-specific enzyme inhibition makes the assays generally lack of selectivity. In this study, we proposed a colorimetric sensing platform for the specific detection of the agricultural fungicide thiophanate-methyl (TM) based on its distinctive inhibitory effect on the nanozyme activity. Since TM contains the symmetric ethylenediamine- and bisthiourea-like groups, it displays strong affinity to the metal site, leading to a loss of the catalytic activity. Accordingly, a Cu-doped carbon nanozyme with excellent oxidase-like properties was designed, and the oxidation process of chromogenic substrate is promoted by Cu-induced generation of reactive oxygen species. Interestingly, the nanozyme activity can be directly and strongly restrained by TM, rather than other probably coexistent pesticides. Consequently, the as-proposed analytical method exhibits specific response toward TM and good linear relationship in the range of 0.2-15 μg mL-1 with a low limit of detection of 0.04 μg mL-1 (S/N = 3). Besides, a smartphone-assisted rapid detection was achieved through identifying the RGB value of the chromogenic system. This work provides a new nanozyme inhibition strategy for the specific detection of TM in environmental sample.

Effect of Hydrothermal Conditions on Kenaf-Based Carbon Quantum Dots Properties and Photocatalytic Degradation

The development of biomass-based CQD is highly attentive to enhancing photocatalytic performance, especially in secondary or ternary heterogeneous photocatalysts by allowing for smooth electron-hole separation and migration. In this study, kenaf-based carbon quantum dots (CQD) were prepared. The main objective of the current work was to investigate temperature, precursor mass and time in hydrothermal synthesis treatment to improve the CQD properties and methylene blue photocatalytic degradation. Optimization of kenaf-based CQD for inclusion in hydrothermal treatment was analyzed. The as-prepared CQDs have been characterized in detail by Fourier transform infrared (FTIR) spectroscopy, high-resolution transmission electron microscope (HRTEM), photoluminescence (PL) and ultraviolet–visible (UV–Vis) spectroscopy. It was found that C200-0.5-24 exhibits a higher photocatalytic activity of the methylene blue dye and optimized hydrothermal conditions of 200 °C, 0.5 g and 24 h. Therefore, novel kenaf-based CQD was synthesized for the first time and was successfully optimized in the as-mentioned conditions. During the hydrothermal treatment, precursor mass controls the size and the distribution of CQD nanoparticles formed. The C200-0.5-24 showed a clearly defined and well-distributed CQD with an optimized nanoparticle size of 8.1 ± 2.2 nm. Indeed, the C200-0.5-24 shows the removal rate of 90% of MB being removed within 120 min.

Recent Advances in Nanomaterial-Based Sensing for Food Safety Analysis

The increasing public attention on unceasing food safety incidents prompts the requirements of analytical techniques with high sensitivity, reliability, and reproducibility to timely prevent food safety incidents occurring. Food analysis is critically important for the health of both animals and human beings. Due to their unique physical and chemical properties, nanomaterials provide more opportunities for food quality and safety control. To date, nanomaterials have been widely used in the construction of sensors and biosensors to achieve more accurate, fast, and selective food safety detection. Here, various nanomaterial-based sensors for food analysis are outlined, including optical and electrochemical sensors. The discussion mainly involves the basic sensing principles, current strategies, and novel designs. Additionally, given the trend towards portable devices, various smartphone sensor-based point-of-care (POC) devices for home care testing are discussed.