Effect of Soaking and Roasting on the Physicochemical and Pasting Properties of Soybean Flour

Effect of roasting temperature and soaking time on the nutritional, antinutrional and sensory properties of protein-based meat analog from lupine

White lupine is a legume crop rich in adequate valuable nutrient profiles especially used as a possible source of proteins where animal-based proteins are scarce. However, there is little documented information about the effect of processing conditions to produce lupine protein-based meat analog. This study explores the impact of roasting temperature (raw, 130, 140, and 150 °C) and soaking time (raw, 2, 4, and 6 days) on the chemical compositions, physical quality, and sensory attributes of meat analog. The result showed that roasting at 140 °C and soaking for 4 days significantly increased (p˂0.05) the proximate and mineral contents of the meat analog. The highest protein content (82.46 %) was obtained at T2t2 (roasted at 140 °C and soaked for 4 days). While the lowest protein content (62.47 %) was observed at T3t3 (roasted at 150 °C and soaked for 4 days). Similarly, the highest (93.17 %) and lowest (79.47 %) cooking yields were obtained at T2t2 and T3t3 respectively. Roasting and soaking conditions also showed a significant effect (p˂0.05) on the anti-nutrient contents of meat analog. The highest overall sensory acceptability (6.40) of the meat analog was observed at T2t2. The research suggests that suitable processing conditions can enhance the nutritional profiles of lupine protein-based meat analog, potentially enabling its industrial production and global market entry.

Dry-air roasting impact on physicochemical, functional, antioxidant properties, phenolic profile and Maillard reaction products of flaxseed flour and cake flour

The study investigated and compared physicochemical, functional, antioxidant properties, phenolic profile and Maillard reaction products (MRP) of flaxseed flour (FF) and flaxseed cake flour (FCF) upon dry-air roasting (DaR) of flaxseeds at 140, 160 and 180 °C for 5 and 10 min. This information on FF and FCF is limited and has considerable gaps. The raw FF exhibited higher fat, ash, antioxidant and functional properties while lower protein than the FCF. Upon increasing DaR conditions, the ash and protein increased in FCF and decreased in FF. DaR at 180 °C for 10 min augmented water solubility index, ΔE, MRP, free rutin and syringic acid, bound epicatechin, gallic acid and syringic acid while lowered moisture, L*, b*, hue, chroma, potassium, iron, selenium, emulsion indexes, caffeic acid, flavonoids and free resveratrol in FF and FCF. In conclusion, DaR improves phenolic profile, antioxidant properties, MRP, water solubility and oil absorption capacity of FF and FCF.

Ready-to-use therapeutic/supplementary foods from local food resources: Technology accessibility, program effectiveness, and sustainability, a review

Ready-to-Use Therapeutic Food (RUTF) or Ready-to-Use Supplementary Food (RUSF) has been widely used in home-based treatment for severely and moderately acute malnourished children. These programs showed positive results in short term nutritional recovery in children, which were reported in some research settings. Nowadays, the RUTF/RUSF formulation has been improved using a variety of RUTF/RUSF from locally available food ingredients. This paper aims to review the essential aspects of the development and provision of RUTF/RUSF made from local food resources and monitor program effectiveness that warrants the program's sustainability. The modified recipes of RUTF/RUSF were developed following the international dietary guidelines for the rehabilitation of severely and moderately acute malnourished children. The local production of RUTF/RUSF provided some benefits that include empowering the local community, consideration of the common eating pattern, promoting the diversification of food consumption, strengthening food security, as well as supporting the sustainability of RUTF/RUSF production. Results of the PRISMA-based systematic literature review revealed various ingredient developments and processing techniques which could improve the product characteristics and sensory evaluation. RUTF/RUSF in local food production provided different food carriers (e.g., biscuits, wafers) and seemed to be more readily accepted by the children. Furthermore, the program sustainability of RUTF/RUSF depends on a continuous ingredients supply and support from the local government. The findings presented the importance of development of such food supplements based on the local food resources and with improved technology for prevention and rehabilitation of malnourished children.

Application of Folin-Ciocalteau colorimetric method in the determination of total tannin in maize and soybean food products

Yellow maize (Zea mays L.) and soybean (Glycine max (L.) Merr.) are local raw materials used in the formulation of complementary foods in Nigeria. The presence of antinutritional factors such as tannins in them could disrupt the nutritional status in infants and young children, thus leading to malnutrition. However, data on the total tannin contents in maize, soybean, and their products remain limited. This could be due to the lack of a fast, accurate, and inexpensive analytical method for tannin determination. The present work thus evaluated the Folin-Ciocalteu (FC) assay for the accurate quantification of total tannin from yellow maize, soybean, and their products. Techniques including soaking, dehulling, oven-drying, boiling, and frying were used to process the raw materials, prior to grinding and subsequent formulation of their products. The FC method was validated to quantify the total tannin contents from extracts of tested samples by ultraviolet-visible (UV-Vis) spectrophotometry. The original extracts from the tested samples, and external standards from tannic acid and total phenolics (µg/µL) were used for method validation. The method validation showed that the instrumental response to standard tannic acid and the investigated analytes were specific, linear (R2 = 0.998), precise (% CV < 20%), and accurate (recovery = 91%). The limits of detection (LOD) and limits of quantification (LOQ) were 0.03 and 0.09 µg/µL, respectively. The validation complied with the requirements to ensure the reliability of the results. The combined processing techniques were also effective in reducing the total tannin content of maize (0.213 to 0.041% TAE) and soybean (0.257 to 0.064% TAE) by 81 and 75%, respectively. The present work demonstrated the suitability of the FC method as an analytical tool for the quantification of total tannin from plant-based food products.

Faba Bean: An Untapped Source of Quality Plant Proteins and Bioactives

Faba beans are emerging as sustainable quality plant protein sources, with the potential to help meet the growing global demand for more nutritious and healthy foods. The faba bean, in addition to its high protein content and well-balanced amino acid profile, contains bioactive constituents with health-enhancing properties, including bioactive peptides, phenolic compounds, GABA, and L-DOPA. Faba bean peptides released after gastrointestinal digestion have shown antioxidant, antidiabetic, antihypertensive, cholesterol-lowering, and anti-inflammatory effects, indicating a strong potential for this legume crop to be used as a functional food to help face the increasing incidences of non-communicable diseases. This paper provides a comprehensive review of the current body of knowledge on the nutritional and biofunctional qualities of faba beans, with a particular focus on protein-derived bioactive peptides and how they are affected by food processing. It further covers the adverse health effects of faba beans associated with the presence of anti-nutrients and potential allergens, and it outlines research gaps and needs.

Comparative study of physicochemical and functional properties of soaked, germinated and pressure cooked Faba bean

Faba bean flours (germinated, soaked, cooked and raw) were evaluated for physiochemical and functional properties. The flour samples exhibited considerable amounts of carbohydrates (58.79-66.19 g/100 g) and proteins (21.9-29.1 g/100 g). Soaked faba bean (SFB) (29.1 g/100 g) and raw faba bean (RFB) (25.70 g/100 g) flour contained significantly higher amount of protein than germinated faba bean (GFB) and pressure cooked faba bean (PCFB). The physicochemical and functional composition of GFB and PCFB were improved compare to raw flour. Physical and functional properties such as water absorption index (2.97 g/g) and foaming stability (140.13 mL/100 mL) were increased by germination. The functional properties of pressure-cooked faba bean such as water solubility index (2.12 g/100 g) and water absorption capacity (2.02 g/g) were higher than other flour samples. The microstructure of legume flour samples explained that the starch granules of raw flours were smooth, oval and granular structure whereas soaked, germinated and cooked flours showed damaged starch granules. The effect of soaking, germination and pressure-cooking demonstrated significant variations in functionals characteristics of faba bean flour. Therefore, various processing conditions can be combined to obtain the desired characteristics in faba bean-based food products.

Enhancement of sensory and nutritional quality of Sel-roti by the incorporation of soy flour

Sel-roti is a doughnut-like deep-fat fried, puffed, spongy, ring-shaped, and fermented rice-flour confectionary indigenous to Nepal. This study was aimed to enhance the sensory and nutritional quality of Sel-roti by incorporating soy flour. The best product was selected by a series of sensory evaluations, and the nutritional quality was then compared with the control. Sel-roti prepared by incorporating 10% of roasted soybean flour (RSF) had significantly superior (p < .05) sensory perceptions viz. color and appearance, texture, flavor, taste, and overall acceptance among the studied samples. The moisture, crude fat, crude protein, total ash, crude fiber, iron, calcium, and energy content in the best product were significantly increased (p < .05) by the incorporation of 10% RSF. However, total carbohydrates was significantly reduced (p < .05) at 10% RSF incorporation. The results can be used by food processors to formulate a batter for the production of Sel-roti with enhanced sensory and nutritional properties.

Effect of germination, roasting, and variety on physicochemical, techno-functional, and antioxidant properties of chickpea (Cicer arietinum L.) protein isolate powder

Chickpeas are a very important part of the human diet due to their nutritional and bioactive composition. Ethiopia is one of the top chickpea producers and consumers of chickpea-based products daily. However, limited studies were conducted on the effect of common processing methods, roasting and germination, on techno-functional and nutritional properties of chickpea protein isolates. Two varieties of chickpea, Arerti (Kabuli type) and Natoli (Desi type), were selected and treated with different roasting temperature (150 and 180 °C) and germination time (24, 48, and 72 h). The protein was isolated with alkaline-solubilization followed by isoelectric precipitation. Freeze-dried isolates were investigated for proximate composition, techno-functional properties, antioxidant properties, and antinutritional content. Chickpea protein isolates (CPIs) mean protein content was between 79.72 and 87.43%, comparatively lower for those from roasted and higher for those from germinated chickpea. Mean values of CPIs’ water holding capacity (WHC), oil holding capacity (OHC), protein solubility (PS), foaming capacity (FC), and Emulsifying capacity (EC) for both varieties were in a range of 1.07–2.47 g/g, 1.40–2.21 g/g, 43.88–69.99%, 14.00–94.00%, and 56.44–84.16%, respectively. Roasting at 150 °C improved most of the techno-functional properties (WHC, OHC, PS, and FC) while roasting at 180 °C negatively affected almost all the techno-functional properties. Both heat treatments significantly increased the antioxidant properties of the isolates. Germination for 72 h was the best treatment in improving all antioxidant properties. CPIs from treated chickpea had lower antinutritional content than those from native chickpea except for phytate on Natoli variety where no statistical difference (p > 0.05) was observed. The finding showed that based on the intended use the different techno-functional properties of the isolates can be altered by applying those treatments. Proximate, techno-functional, antioxidant, and antinutritional characters indicated that CPIs can be a good ingredient for the food industry to formulate functional foods.

EVALUATION OF PROTEIN AND IRON ABSORPTION OF MOCAF-BASED WEANING FOOD

Weaning food biscuit based on mocaf (modified cassava flour) with substitution of soybean, mung bean and red kidney bean flour is expected increasing protein of the product. However, in the legumes flour there are anti-nutritional agent that can affect the absorption of other nutrient such as protein and iron. The purpose of this study was to evaluate the absorption of protein and iron from mocaf based-weaning food. Protein and iron absorption were determined from weaning food (biscuit) using Sprague-Dawley rats, 3 weeks old, weight 70-80 g for 0, 30, 60, 90, and 120 minutes. The treatments of this study were mocaf biscuits (as a control), biscuits with substitution of soybean flour (MSF), mung bean flour (MMF), red kidney bean flour (MRF) and commercial biscuits (CB). The highest protein absorption of control, MSF and MRF were at 120 minutes with absorption percentages 27.76, 38.94, and 9.35%, respectively. Samples MMF and CB had the highest protein absorption at 60 and 90 minutes, with absorption percentages 15.58 and 37.57%. Meanwhile, the highest iron absorption of control, MSF and MMF were at 90 minutes with absorption percentages 53.86, 4.71, and 54.29%. Samples MRF and CB had highest iron absorption at 60 minutes with absorption percentages 7.97 and 69.76%, respectively. The MSF sample had highest protein absorption than other samples. Meanwhile, the MMF sample had an iron absorption value that approached to commercial biscuit.

Production of a Complementary Food: Influence of Cowpea Soaking Time on the Nutritional, Antinutritional, and Antioxidant Properties of the Cassava-Cowpea-Orange-Fleshed Potato Blends

Soaking and incorporation of legumes for fortification are essential to a complementary food production process. Cassava, orange-fleshed potato, and cowpeas are sustainably cheap, locally available, and underutilized for food biofortification. This study investigated the effect of cowpea soaking time (3, 6, and 9 h) on different composition ratios of cassava, cowpea, and orange-fleshed sweet potato (CCP) blends (50 : 40 : 10 (EC), 50 : 30 : 20 (FC), 50 : 20 : 30 (GC), and 50 : 50 : 0 (HC)). Each blend was assayed for pH, antinutrient, antioxidant, and proximate contents. Results obtained showed that the CCP blends were significantly influenced by the length of cowpea soaking. Moisture and fiber content decreased significantly (P ≤ 0.05) with increased steeping time (3 to 9 h) for the cassava-cowpea-OFSP blends. The blends were significantly different (P ≤ 0.05) in terms of their protein, fiber, fat, ash, and carbohydrate contents. The moisture content of the EC blend was significantly different from only FC and HC blends, respectively. Six (6) hours of soaking showed no significant difference in the nutritional composition of the flour samples compared with 9 hours. The soaking length optimizes the health and nutrient-promoting factors in the various blend samples while also reaffirming cowpeas as a viable biofortification option for use in complementary food production.

The Effects of Tannins in Monogastric Animals with Special Reference to Alternative Feed Ingredients

Over recent years, the monogastric animal industry has witnessed an increase in feed prices due to several factors, and this trend is likely to continue. The hike in feed prices is mostly due to extreme competition over commonly used conventional ingredients. For this trend to be subdued, alternative ingredients of both plant and animal origin need to be sourced. These types of ingredients are investigated with the aim of substituting all or some of the conventional compounds. However, alternative ingredients often have a double-edged sword effect, in that they can supply animals with the necessary nutrients although they contain antinutritional factors such as tannins. Tannins are complex secondary metabolites commonly present in the plant kingdom, known to bind with protein and make it unavailable; however, recently they have been proven to have the potential to replace conventional ingredients, in addition to their health benefits, particularly the control of zoonotic pathogens such as Salmonella. Thus, the purpose of this review is to (1) classify the types of tannins present in alternative feed ingredients, and (2) outline the effects and benefits of tannins in monogastric animals. Several processing methods have been reported to reduce tannins in diets for monogastric animals; furthermore, these need to be cost-effective. It can thus be concluded that the level of inclusion of tannins in diets will depend on the type of ingredient and the animal species.

The Probable Use of Genus amaranthus as Feed Material for Monogastric Animals

This review presents, discusses, and provides a comprehensive understanding of the potential use of amaranth as feed for monogastric animals. Amaranth is an ancient nutritious crop that has been cultivated for multiple purposes. In America, Asia, and Africa, the leaves of amaranth species are used as vegetables. The change in climatic conditions globally has resulted in shortages of rainfall, unpredictable weather, and lack of inputs such as fertilizer. This has led to scarcity of protein sources in the market and instability in prices which makes it necessary to consider alternative ingredients in poultry, pigs, fish, and rabbits feed formulation. Amaranth is rich in fiber, proteins, vitamins, minerals, and phenolic compounds which have some health benefits in animals and can be used to improve productivity. It also contains anti-nutritional factors which can be reduced by several processing methods. Moreover, its use in monogastric nutrition is useful because amaranth has shown to improve monogastric productivity without having any adverse effect on animals' productivity. Thus, from this review, it can be concluded that amaranth leaves and grains can be used successfully in monogastric animals though different processing methods which might need to be employed in order to reduce anti-nutritional factors before use in animals.

Influence of germination on physicochemical properties of flours from brown rice, oat, sorghum, and millet

The changes in physiochemical properties of flours obtained from the four selected grains after germination were investigated. After germination, the sprout length of sorghum and millet was substantially larger than that of brown rice and oat. Germination led to a decrease in the apparent amylose content and swelling factor of flours. Gelatinization onset and peak temperatures increased after germination, while a slight decrease was found in conclusion temperature. Compared to the raw flours, the germinated flours derived from brown rice, sorghum, and millet had lower gelatinization enthalpy, whereas the germinated oat flour showed higher gelatinization enthalpy. Germination resulted in significant decrease in pasting parameters of the four flours. Amylose leaching of sorghum and millet flours increased after germination, while the brown rice and oat flours showed a significant decrease in amylose leaching. Results suggest that germination effectively altered the physicochemical properties of grain flours, which can be utilized as functional ingredient in the preparation of grain-based products.

Comparison of the Antioxidant Activities and Volatile Compounds of Coffee Beans Obtained Using Digestive Bio-Processing (Elephant Dung Coffee) and Commonly Known Processing Methods

There are different types of coffee processing methods. The wet (WP) and dry processing (DP) methods are widely practiced in different parts of coffee-growing countries. There is also a digestive bioprocessing method in which the most expensive coffee is produced. The elephant dung coffee is produced using the digestive bioprocessing method. In the present experiment, the antioxidant activity and volatile compounds of coffee that have been processed using different methods were compared. The antioxidant activity, total phenolic content (TPC), total flavonoid content (TFC), and total tannin content (TTC) of green coffee beans from all treatments were higher as compared to roasted coffee beans. Regarding the green coffee beans, the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity of elephant dung coffee beans was higher as compared to that of the DP and WP coffee beans. The green coffee beans had higher DPPH activity and ferric reducing antioxidant power (FRAP) value compared to the roasted coffee beans. The green beans of elephant dung coffee had a high TPC than the beans obtained by WP and DP methods. TFC in elephant dung coffee in both green and roasted condition was improved in contrast to the beans processed using dry and wet methods. The elephant dung coffee had an increased TTC in comparison to the DP and WP coffee (green beans). About 37 volatile compounds of acids, alcohols, aldehydes, amide, esters, ethers, furans, furanones, ketones, phenols, pyrazines, pyridines, Heterocyclic N, and pyrroles functional classes have been found. Some of the most abundant volatile compounds detected in all treatments of coffee were 2-furanmethanol, acetic acid, 2-methylpyrazine, 2,6-dimethylpyrazine, pyridine, and 5-methylfurfural. Few volatile compounds have been detected only in elephant dung coffee. The principal component analysis (PCAs) was performed using the percentage of relative peak areas of the volatile compound classes and individual volatile compounds. This study will provide a better understanding of the impacts of processing methods on the antioxidants and volatile compounds of coffee.

Development and Study of Semi-Solid Preparations Containing the Model Substance Corticotropin (ACTH): Convenience Application in Neurodegenerative Diseases

Corticotropin (ACTH, previously an adrenocorticotropic hormone) is used in the diagnosis and treatment of pituitary gland disorders, adrenal cortex disorders, and other diseases, including autoimmune polymyositis, systemic lupus erythematosus, rheumatoid arthritis, Crohn’s disease, and ulcerative colitis. So far, the ointment dosage form containing ACTH for use on the skin is unknown. Therefore, it seems appropriate to develop a semi-solid formulation with corticotropin. Emulsion ointments were prepared using an Unguator based on the cream base Lekobaza^® containing corticotropin in different concentrations, and then the physical and chemical parameters of the ointment formulations, such as pH, spreadability, rheological properties, and texture analysis, were evaluated. In addition, a USP apparatus 2 with enhancer cells was utilized to study the in vitro drug release characteristics of the selected formulations. All the ointments obtained were characterized by good spreadability and viscosity. An analysis of the ointment texture was performed and the dependence of the tested parameters on the ACTH content in the ointment was demonstrated. Examination of the structure of the ointment showed that a high concentration of ACTH increases the hardness and adhesiveness of the ointment. In turn, it adversely affects the cohesiveness and elasticity of the ointments tested. The results of the release study showed that ACTH is released the fastest from the formulation with the lowest concentration, while the slowest from the ointment with the highest concentration of ACTH.

Development of a Natural Product Rich in Bioavailable Omega-3 DHA from Locally Available Ingredients for Prevention of Nutrition Related Mental Illnesses

Objectives: Poor mental health remains a serious public concern worldwide. The most vulnerable individuals are children and adolescents in developing countries. Nutritional deficiency of long-chain omega-3 fatty acids, particularly docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA), have long been recognized as a major contributing factor for mental health illnesses. Provision of ready-to-use natural product rich in preformed Omega-3 DHA and EPA could address this problem. However, most commonly used products are expensive and contain less or no preformed Omega-3 DHA and EPA, making them less suitable for prevention of mental illnesses in resource-poor countries. The main objective of this study was to develop a natural product rich in preformed Omega-3 DHA and EPA from locally available ingredients.Methods: Linear programing (LP) was used to formulate a natural product rich in preformed Omega-3 DHA and other essential nutrients using locally available ingredients other than fish and dairy products. Laboratory analysis was then performed to validate the nutritional value of the LP-formulation using standard analytical methods. The relative difference between the LP tool calculated values, and the laboratory-analyzed values were calculated. Sensory testing was also done to evaluate consumer acceptance of the final product.Results: Optimal formulation contained about 220 mg of preformed Omega-3 DHA + EPA, enough to meet the RDI for children aged 2-10 years. The LP analysis further showed that the cost of the developed product is USD 0.15/100 g, which is 50% lower than that of Plumpy'nut. Laboratory analysis revealed similar results as that of LP at P = 0.05.Conclusions: These findings indicate that ready-to-use natural food rich in preformed DHA and EPA can be developed from locally available ingredients.

Antioxidant Properties of Fermented Green Coffee Beans with Wickerhamomyces anomalus (Strain KNU18Y3)

A few yeast species have been tested frequently to improve the tastes, flavors, and other important quality parameters of coffee. However, continuing evaluations of different yeast species for fermenting green coffee beans will have a significant positive contribution to the coffee industry. This experiment was conducted to evaluate the antioxidant properties, total phenol content (TPC), total flavonoid content (TFC), total tannin content (TTC), and the consumer acceptability of fermented green coffee beans with Wickerhamomyces anomalu. The coffee beans were roasted at different roasting conditions (light, medium, and dark). There was no significant (p > 0.05) difference between the yeast-fermented and non-fermented coffee with regard to the oxygen radical absorbance capacity (ORAC) values in medium and dark roasted coffee. Similarly, the superoxide dismutase-like (SOD)-like activity did not significantly differ in all roasting conditions. However, the SOD-like activity was significantly different (p < 0.05), particularly within light roasted and medium roasted, and between light roasted and dark roasted in both the control and fermented coffee extracts. The 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay and ferric reducing antioxidant power (FRAP) were improved in fermented coffee beans. There was a significant (p ≤ 0.05) difference between the yeast-fermented and non-fermented coffee with respect to the TPC and TFC in all roasting types and the TTC in the light and dark roasting conditions. The fermentation of green coffee beans with W. anomalus increased the TPC and TFC. However, the TTC was lower in the fermented coffee beans compared to the non-fermented coffee beans in medium and dark roasted coffee. In general, fermentation of green coffee beans with W. anomalus has the potential to improve the functionality of coffee beans.

Antinutrients in Plant-based Foods: A Review

Modern society has easy access to a vast informational database. The pursuit of sustainable green and healthy lifestyle leads to a series of food choices. Therefore, it is of importance to provide reliable, comprehensive and up-to-date information about food content including both nutritional and antinutritional elements.

Nutrients are associated with positive effects on human health. Antinutrients, on the other hand, are far less popular for the contemporary man. They are highly bioactive, capable of deleterious effects as well as some beneficial health effects in man, and vastly available in plant-based foods. These compounds are of natural or synthetic origin, interfere with the absorption of nutrients, and can be responsible for some mischievous effects related to the nutrient absorption. Some of the common symptoms exhibited by a large amount of antinutrients in the body can be nausea, bloating, headaches, rashes, nutritional deficiencies, etc. Phytates, oxalates, and lectins are few of the well-known antinutrients.

Science has acknowledged several ways in order to alter the negative influence antinutrients exhibiting on human health. Mechanical, thermal and biochemical approaches act synergistically to provide food with lower antinutritional levels.

The purpose of this review was to synthesize the availability of antinutrients, clear their effect on the human body, and commemorate possible paths to disable them. This review provides links to the available literature as well as enables a systematic view of the recently published research on the topic of plant-based antinutrients.

Processing techniques of selected oilseed by-products of potential use in animal feed: Effects on proximate nutrient composition, amino acid profile and antinutrients

The effects of processing by autoclaving (AC), soaking (SK), short-term fermentation (S-TF, 4 d) and long-term fermentation (L-TF, 14 d) on the nutritional composition, amino acid profile and some antinutrients were determined for cottonseed meal (CSM), groundnut meal (GNM) and groundnut husk (GH) in this study. After processing, crude protein content improved by 11% after L-TF, and crude lipid content 25% after SK for CSM; crude protein content improved by 27% after S-TF and L-TF, and crude lipid content 13% after SK for GNM. Soaking and fermentation were shown to significantly increase essential amino acid contents by 44% (SK, methionine) in CSM and 46% in GNM (L-TF, histidine). Phosphorus content was reduced by 59% in CSM and 57% in GNM by L-TF. All processing techniques, with the exception of AC, reduced phytic acid and gossypol contents in CSM and GNM. It was concluded that SK and fermentation were simple, cost-effective, and efficient ways to improve the nutritional value of the selected oilseed by-products.

Functional Properties of Select Dry Bean Seeds and Flours

Select functional properties of 21 dry beans and soybean seeds and their corresponding flours were evaluated. Among the tested seeds, dark-red and light-red kidney beans had larger length (L)/breadth (B) ratios than the rest. Lentil seeds were the smallest (L/B = 0.98), thinnest (2.23 mm), and lightest (density 1.14 g/cm3 ) among the tested seeds. Garbanzo seeds were the thickest (thickness 7.05 mm). Highest bulk density (g/cm3 ), porosity (%), specific volume (cm3 /g), and bulk volume (cm3 /g) were registered, respectively, by moth bean (0.86 g/cm3 ), pink bean (66.53%), lentil (0.88 cm3 /g), and soybean (1.46 cm3 /g) seeds. Water uptake during soaking peaked in ≤12 hr by all bean seeds. Soybean and black bean flours, respectively, exhibited the highest water-holding (3.14 g/g) and oil-holding (2.15 g/g) capacities. Great Northern bean flour exhibited higher foaming volume (30.8% increase) than all the other tested seed flours. Stability of all bean flour foams were ≤36 hr. Black gram flour formed a gel at the lowest concentration (4% w/v) among all the tested seed flours. Garbanzo, soybean, tepary, and val bean flours failed to form a gel at ≤ 20% (w/v). The results indicate that the tested dry bean flours have great potential as functional ingredients for food formulations.

PRACTICAL APPLICATION

Understanding the functional properties of the dry bean seeds and flours is important for designing handling, transportation, storage, and processing methods for these beans and in guiding the selection of appropriate dry bean flours as food ingredients.