Pulsed Light treatment below a Critical Fluence (3.82 J/cm2) minimizes photo-degradation and browning of a model Phenolic (Gallic Acid) Solution

Effect of pulsed light on curcumin chemical stability and antioxidant capacity

Curcumin is the major bioactive component in turmeric with potent antioxidant activity. Little is known about how pulsed light (PL) technology (an emerging non-thermal food processing technology relying on high intensity short duration flashes of light) can affect the chemical stability and antioxidant capacity of curcumin. This study found that PL treatment of fluence levels from 0 to 12.75 J/cm2 produced a fluence-dependent reduction in curcumin content. These results paralleled the production of a tentative curcumin dimer, identified as a potential photochemical transformation product. PL-treated curcumin at relatively higher fluence levels decreased chemical-based ORAC and ABTS antioxidant capacity, relative to control (P < 0.05). This contrasted the effect observed to increase coincidently both intracellular antioxidant capacity (e.g., DCFH-DA (P < 0.05)) and GSH/GSSG ratio (P < 0.05), respectively, in cultured differentiated Caco-2 cells. In conclusion, the application of PL on curcumin results in photochemical transformation reactions, such as dimerization, which in turn, can enhance biological antioxidant capacity in differentiated Caco-2 cells.

Effect of UV Filters during the Application of Pulsed Light to Reduce Lactobacillus brevis Contamination and 3-Methylbut-2-ene-1-thiol Formation While Preserving the Physicochemical Attributes of Blonde Ale and Centennial Red Ale Beers

Pulsed light (PL) is a novel, non-thermal technology being used to control the microbial spoilage of foods and beverages. Adverse sensory changes, commonly characterized as "lightstruck", can occur in beers when exposed to the UV portion of PL due to the formation of 3-methylbut-2-ene-1-thiol (3-MBT) upon the photodegradation of iso-α-acids. This study is the first to investigate the effect of different portions of the PL spectrum on UV-sensitive beers (light-colored blonde ale and dark-colored centennial red ale) using clear and bronze-tinted UV filters. PL treatments with its entire spectrum, including the ultraviolet portion of the spectrum, resulted in up to 4.2 and 2.4 log reductions of L. brevis in the blonde ale and centennial red ale beers, respectively, but also resulted in the formation of 3-MBT and small but significant changes in physicochemical properties including color, bitterness, pH, and total soluble solids. The application of UV filters effectively maintained 3-MBT below the limit of quantification but significantly reduced microbial deactivation to 1.2 and 1.0 log reductions of L. brevis at 8.9 J/cm² fluence with a clear filter. Further optimization of the filter wavelengths is considered necessary to fully apply PL for beer processing and possibly other light-sensitive foods and beverages.

Pulsed Light (PL) Treatments on Almond Kernels: Salmonella enteritidis Inactivation Kinetics and Infrared Thermography Insights

Abstract

Extending the shelf-life and ensuring microbiological safety of food products while preserving the nutritional properties are key aspects that must be addressed. Heat processing of food matrices has been the golden standard during the last decades, while certain non-thermal processing options have recently gained ground. In the present study, experimental pulsed light (PL) surface inactivation treatments of Salmonella enteritidis on almonds kernels are performed. The PL system is set to test different operative conditions, namely power (1000, 1250, and 1500 W) and frequency (1.8, 3.0, and 100.0 Hz) at different treatment times (from 5 to 250 s), which result in applied fluence doses in the 0–100 J·cm⁻² range. Additionally, temperature measurements are collected at each operative condition on the almond surface (using infrared (IR) thermography) and at the superficial layer of the almond (1-mm depth using a thermocouple). The observed PL inactivation kinetics are then modelled using four different models. The best goodness-of-fit is found for the two-parameter Weibull model (R² > 0.98 and RMSE < 0.33 for all cases). The maximum achieved log-CFU reductions are 6.02 for the 1.8-Hz system, 4.69 for the 3.0-Hz system, and 3.66 for 100.0-Hz system. The offset between the collected temperature readings by the two sensors is contrasted against the inactivation rate (following the two-parameter Weibull model). It was found that the highest inactivation rate corresponds approximately to the point where the infrared camera detects a slowdown in the surface heating.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s11947-021-02725-9.

Effect of nonthermal treatments on selected natural food pigments and color changes in plant material

In recent years, traditional high-temperature food processing is continuously being replaced by nonthermal processes. Nonthermal processes have a positive effect on food quality, including color and maintaining natural food pigments. Thus, this article describes the influence of nonthermal, new, and traditional treatments on natural food pigments and color changes in plant materials. Characteristics of natural pigments, such as anthocyanins, betalains, carotenoids, chlorophylls, and so forth available in the plant tissue, are shortly presented. Also, the characteristics and mechanism of nonthermal processes such as pulsed electric field, ultrasound, high hydrostatic pressure, pulsed light, cold plasma, supercritical fluid extraction, and lactic acid fermentation are described. Furthermore, the disadvantages of these processes are mentioned. Each treatment is evaluated in terms of its effects on all types of natural food pigments, and the possible applications are discussed. Analysis of the latest literature showed that the use of nonthermal technologies resulted in better preservation of pigments contained in the plant tissue and improved yield of extraction. However, it is important to select the appropriate processing parameters and to optimize this process in relation to a specific type of raw material.

Sunroot snack bar: Optimization, characterization, consumer perception, and storage stability assessment

This study reports the evolution of phenolics, inulin content, proximate composition, hardness, and sensory characteristics of an inulin-rich healthy snack bar (The Sunroot Snack Bar) over 90 days of storage in refrigerated and room temperature storage. A response surface methodology (RSM) with a central composite rotatable design was first employed for optimizing the concentrations of sunroot, potato, and oats. The optimum selected concentrations of sunroot, potato, and oat were 53.99, 37.88, and 5 g, respectively, and a quadratic model was found to yield the best fit. Analysis of variance revealed that a higher sunroot content resulted in more firmness of the bar and higher overall acceptability in sensory trials. Sunroot snack bar samples without flavor (control), sunroot snack bar with cheese flavor (S1), and sunroot snack bar with olive flavor (S2) were then tested for sensory, chemical, phytochemicals, and microbial contents among control, S1, and S2 samples over a 90-day shelf-life study. Results showed no significant (p < .05) changes in these contents on addition of flavor. An increase in microbial load and the appearance of a bitter taste after 30 days of fresh sunroot storage were observed. No microbial growth was observed in all sunroot snack bar samples during storage at 4°C, while some microbial growth was observed at 25°C for 90 days. It was inferred that the high-quality shelf life of the sunroot bar was 90 days at 4°C, which was shortened to a month if the bars were preserved at 25°C. There was a significant phenolic and inulin content loss at 25°C compared with 4°C in total phenolic component. Based on the results of sensory evaluation, online questionnaire of customer experience, and cost analysis, this study successfully used sunroot tubers for the production of snack bars as a promising new raw material, which was introduced healthily with a suitable price for such product compared with other products in the market.

Multidisciplinary Studies of Folk Medicine "Five Thieves' Oil" (Olejek Pięciu Złodziei) Components

To meet the growing interest in natural antibacterial agents, we evaluated the physicochemical and biological properties of the folk medicine known as “five thieves’ oil” (Polish name: olejek pięciu złodziei). Five thieves’ oil consists of a mixture of five oils: rosemary, lemon, clove, eucalyptus, and cinnamon. In this study, we performed gas chromatography, FTIR, and UV–vis spectroscopic analysis, as well as L-a-b color tests, contact angle determination, and surface tension determination. To verify its antibacterial activity, the metabolic activity and changes in cell membrane permeability of bacteria of the genus Pseudomonas were studied. As a result, it was found that among the constituent oils, the oils of clove and cinnamon were the least volatile and, at the same time, had the strongest antibacterial activity. However, a mix of all the oils also showed comparable activity, which was even more pronounced for the oils after 4 weeks of aging. This effect can be linked to the high content of terpene derivatives such as eugenol and cinnamaldehyde, which can cause changes in bacterial membrane permeability, affecting cell activity and survival. This study is the first to characterize the constituents of the popular folk medicine five thieves’ oil, confirming and explaining its strong antibacterial activity, thus constituting a significant contribution to contemporary health education.

In Vitro Antimicrobial, Antioxidant and Anticancer Activities of Egyptian Citrus Beebread

In this study, Egyptian beebread (EBB) was investigated for its nutritive value, chemical composition, antioxidant properties, antimicrobial and antitumor activities. Results indicated that EBB was a good source of protein (23.58 ± 0.183 g/100 g BB), total free sugar (20.266 ± 0.930) and potassium (290.202 ± 2.645 mg/100 g). Additionally, 14 fatty acids were identified in EBB, wherein polyunsaturated and monounsaturated fatty acids represented 51.06% ± 0.09% and 9.86% ± 0.01%, respectively. The EBB extract exhibited almost 400% better antiradical activity than BHT, with IC₅₀ of EBB extract being 10.7 µg/mL compared to 39.5 µg/mL for BHT. EBB exhibited higher inhibitory activity than the reference compound against Staphylococcus aureus and Escherichia coli, followed by Bacillus subtilis. No inhibitory activity was observed against Aspergillus Niger. Additionally, the highest inhibitory activity was recorded against Caco-2 cells, followed by PC3 and HepG-2 cancer cell lines with IC₅₀ values 262, 314 and 386 μg/mL, respectively. These findings establish the potential of EBB as an antioxidant, antimicrobial and antitumor agent, with possible applications as natural food supplements and natural preservatives.

Infrared Radiation Favorably Influences the Quality Characteristics of Key Lime Juice

The effect of infrared radiation (IR) on the physicochemical characteristics, pectin methylesterase activity (PME), hydroxymethylfurfural (HMF) content, microbiological activity, color, and sensory aspects on black lime juice was studied. IR was compared to conventional thermal heating (CTH) in batch infrared extraction pasteurizer, designed to allow both infrared and conventional heating. IR resulted in a reduction in pH and Brix values and a mild increase in titratable acidity, as compared to CTH and control. After 60 days at 5 °C, the ascorbic acid percentage was decreased by 24.90%, 29.75%, and 58.31% in the control, IR and CTH, respectively. The total amount of phenols in juice treated with IR was higher as compared to CTH and control, while there was a significant decrease in the antioxidant activity. The statistical analysis reflected significantly low (p < 0.05) activity of PME for IR samples as compared to CTH and control. The amount of Hydroxymethylfurfural (HMF) in all juice samples steadily increased during the storage at 5 °C in 60 days. The microbial content of control was 3.85 log cfu/mL after 60 days at 5 °C, while it was 2.1 log cfu/mL for IR which reflected a significant difference between the IR, CTH, and control samples. Additionally, color and sensory analysis of IR treated sample when compared to control, reflected similar attributes. Overall, IR was found to be an excellent substitute for the preservation of black lime juice as a rapid pasteurization technique with less heat exposure; wherein the nutrition and health benefits of the juice could be maintained for a minimum period of 60 days.

An Overview of the Factors Influencing Apple Cider Sensory and Microbial Quality from Raw Materials to Emerging Processing Technologies

Given apple, an easily adapted culture, and a large number of apple varieties, the production of apple cider is widespread globally. Through the fermentation process, a series of chemical changes take place depending on the apple juice composition, type of microorganism involved and technology applied. Following both fermentations, alcoholic and malo-lactic, and during maturation, the sensory profile of cider changes. This review summarises the current knowledge about the influence of apple variety and microorganisms involved in cider fermentation on the sensory and volatile profiles of cider. Implications of both Saccharomyces, non-Saccharomyces yeast and lactic acid bacteria, respectively, are discussed. Also are presented the emerging technologies applied to cider processing (pulsed electric field, microwave extraction, enzymatic, ultraviolet and ultrasound treatments, high-pressure and pulsed light processing) and the latest trends for a balanced production in terms of sustainability, authenticity and consumer preferences.

Phenolic Composition, Antioxidant Capacity and Antibacterial Activity of White Wormwood (Artemisia herba-alba)

Artemisia herba-alba Asso. (Wormwood) is a wild aromatic herb that is popular for its healing and medicinal effects and has been used in conventional as well as modern medicine. This research aimed at the extraction, identification, and quantification of phenolic compounds in the aerial parts of wormwood using Soxhlet extraction, as well as characterizing their antimicrobial and anitoxidant effects. The phenolic compounds were identified in different extracts by column chromatography, thin layer chromatography (TLC), and high performance liquid chromatography. Five different fractions, two from ethyl acetate extraction and three from ethanolic extraction were obtained and evaluated further. The antimicrobial activity of each fractions was evaluated against two Gram-positive (Bacillus cereus and Staphylococcus aureus) and two Gram-negative microorganisms (Escherichia coli and Proteus vulgaris) using the disc-diffusion assay and direct TLC bioautography assay. Fraction I inhibited B. cereus and P. vulgaris, Fraction II inhibited B. cereus and E. coli, Fraction III inhibited all, except for P. vulgaris, while Fractions IV and V did not exhibit strong antimicrobial effects. Their antioxidant capabilities were also measured by calculating their ability to scavenge the free radical using DPPH method and the ferric reducing antioxidant power (FRAP) assay. Ethanolic fractions III and V demonstrated excellent antioxidant properties with IC50 values less than 15.0 μg/mL, while other fractions also had IC50 values less than 80.0 μg/mL. These antioxidant effects were highly associated with the number of phenolic hydroxyl group on the phenolics they contained. These extracts demonstrated antimicrobial effects, suggesting the different phenolic compounds in these extracts had specific inhibitory effects on the growth of each bacteria. The results of this study suggested that the A. herba-alba can be a source of phenolic compounds with natural antimicrobial and antioxidant properties which can be used for potential pharmaceutical applications.

Plant-Based (Hemp, Pea and Rice) Protein-Maltodextrin Combinations as Wall Material for Spray-Drying Microencapsulation of Hempseed (Cannabis sativa) Oil

Conscious consumers have created a need for constant development of technologies and food ingredients. This study aimed to examine the properties of emulsions and spray-dried microcapsules prepared from hempseed oil by employing a combination of maltodextrin with hemp, pea, and rice protein as carrier materials. Oil content in the microcapsules was varied at two levels: 10 and 20%. Increasing oil load caused a decrease in viscosity of all samples. Consistency index of prepared emulsions was calculated according to Power Law model, with the lowest (9.2 ± 1.3 mPa·s) and highest values (68.3 ± 1.1 mPa·s) for hemp and rice protein, respectively, both at 10% oil loading. The emulsion stability ranged from 68.2 ± 0.7% to 88.1 ± 0.9%. Color characteristics of the microcapsules were defined by high L* values (from 74.65 ± 0.03 to 83.06 ± 0.03) and low a* values (-1.02 ± 0.015 to 0.12 ± 0.005), suggesting that the materials were able to coat the greenish color of the hemp seed oil acceptably. The highest encapsulation efficiency was observed in samples with rice protein, while the lowest was with hemp protein. Combination of maltodextrin and proteins had a preventive effect on the oxidative stability of hempseed oil. Oil release profile fitted well with the Higuchi model, with hempseed oil microencapsulated with pea protein-maltodextrin combination at 10% oil loading depicting lowest oil release rates and best oxidative stability.

Efficacy of Antimicrobial and Larvicidal Activities of Green Synthesized Silver Nanoparticles Using Leaf Extract of Plumbago auriculata Lam

This work reports the synthesis of silver nanoparticles (AgNPs) using aqueous extract of Plumbago auriculata, and evaluates their antibacterial and larvicidal activities. The synthesized silver nanoparticles were characterized by various spectroscopy techniques, such as FTIR, XRD, TEM, EDX, Zeta potential, and DLS. The synthesized AgNPs exhibited significant antibacterial activity against Gram-positive and Gram-negative bacteria, such as Bacillus subtilis, Staphylococcus aureus, Escherichia coli, and Klebsiella pneumoniae. Furthermore, synthesized nanoparticles inhibited the fourth instars larvae of Aedes aegypti and Culex quinquefasciatus at the concentration of 45.1 and 41.1 µg/mL respectively. Results of dose-dependent studies showed that synthesized nanoparticles were also effective at low concentrations. Molecular docking studies performed with the salivary protein and odorant-binding protein of Aedes aegypti and Culex quinquefasciatus demonstrated that the naphthoquinone compound plumbagin exhibited reliable binding affinity towards the two enzymes. The findings thus reveal that the plant extract and its nanoparticles can be a better alternative to available chemicals to control mosquitos.

Applications of Pulsed Light Decontamination Technology in Food Processing: An Overview

Consumers of the 21st century tend to be more aware and demand safe as well as nutritionally balanced food. Unfortunately, conventional thermal processing makes food safe at the cost of hampering nutritional value. The food industry is trying to develop non-thermal processes for food preservation. Pulsed light (PL) is one such emerging non-thermal food processing method that can decontaminate food products or food contact surfaces using white light. Exposure to intense light pulses (in infrared, visible, and ultraviolet (UV) regions) causes the death of microbial cells, rendering the food safe at room temperature. PL technology is an excellent and rapid method of disinfection of product surfaces and is increasingly being used for food surfaces and packaging decontamination, enabling the minimal processing of food. This paper aims to give an overview of the latest trends in pulsed light research, discuss principles of pulse generation, and review applications of various PL systems for the inactivation of microorganisms in vitro, in various food products, and on food contact surfaces. Effects of PL on food quality, challenges of the process, and its prospects are presented.

Safety, Quality, and Processing of Fruits and Vegetables

Nowadays, one of the main objectives of the fruit and vegetable industry is to develop innovative novel products with high quality, safety, and optimal nutritional characteristics in order to respond with efficiency to the increasing consumer expectations. Various emerging, unconventional technologies (e.g., pulsed electric field, pulsed light, ultrasound, high pressure, and microwave drying) enable the processing of fruits and vegetables, increasing their stability while preserving their thermolabile nutrients, flavour, texture, and overall quality. Some of these technologies can also be used for waste and by-product valorisation. The application of fast noninvasive methods for process control is of great importance for the fruit and vegetable industry. The following Special Issue “Safety, Quality, and Processing of Fruits and Vegetables” consists of 11 papers, which provide a high-value contribution to the existing knowledge on safety aspects, quality evaluation, and emerging processing technologies for fruits and vegetables.