Plant-Based (Hemp, Pea and Rice) Protein-Maltodextrin Combinations as Wall Material for Spray-Drying Microencapsulation of Hempseed (Cannabis sativa) Oil

Advanced fabrication of complex biopolymer microcapsules via RSM-optimized supercritical carbon dioxide solution-enhanced dispersion: A comparative analysis of various microencapsulation techniques

This work aimed to enhance hemp seed oil encapsulation within a hemp seed protein-alginate complex by optimizing parameters in the solution-enhanced dispersion process, employing supercritical carbon dioxide (SEDS) without reliance on organic solvents or elevated temperatures. By response surface methodology (RSM), the microencapsulation efficacy (MEE), particle size (PS) and peroxide value (PV) was determined with respect to three parameters; temperature (°C), pressure (bar) and feed flow rate (mL/min). The optimum conditions were predicted at temperature (40 °C), pressure (150 bar) and feed flow rate (2 mL/min) to offer an MEE of 89.47%, PS of 7.81 μm and PV of 2.91 (meq/kg oil). In addition, the SEDS method was compared with spray- and freeze-drying for encapsulating hemp seed oil. The findings demonstrated SEDS' superiority, exhibiting exceptional attributes such as the highest MEE, smallest PS and the production of spherical, smooth microcapsules. This highlights its effectiveness in comparison to spray- and freeze-drying methods.

Plant and animal protein mixed systems as wall material for microencapsulation of Mānuka essential Oil: Characterization and in vitro release kinetics

Combination of plant and animal protein diet is becoming a valuable source of nutrition in the modern diet due to the synergistic functional properties inherent in these protein complexes. Moreover, the synergy between animal and plant proteins can contribute to the high stability and improved solubility of the encapsulated bioactive ingredients (e.g., essential oils). Therefore, the study was designed to evaluate the plant (pea protein (PP) and lupine protein (LP)) and animal protein (whey protein, WP) mixed systems as a wall material for microencapsulation of mānuka essential oil, as an example of bioactive compound. Moreover, physicochemical properties and in vitro release profile of encapsulated mānuka essential oil were studied. Mānuka essential oil microcapsules exhibited low moisture content (5.3-7.1 %) and low water activity (0.33-0.37) with a solubility of 53.7-68.1 %. Change in wall material ratio significantly affected the color of microcapsules, while microcapsules prepared with 1:1 protein/oil ratio demonstrated a high encapsulation efficiency (90.4 % and 89.4 %) for protein mixed systems (PP + WP and LP + WP), respectively. Microcapsules further showed low values for lipid oxidation with a high oxidative stability and antioxidant activity (62.1-87.0 %). The zero order and Korsmeyer-Peppas models clearly explained the release mechanism of encapsulated oil, which was dependent on the type and concentration of the protein mixed used. The findings demonstrated that the protein mixed systems successfully encapsulated the mānuka essential oil with controlled release and high oxidative stability, indicating the suitability of the protein mixed systems as a carrier in encapsulation and application potential in development of encapsulated functional foods.

Microencapsulation of lemongrass and mangosteen peel as phytogenic compounds to gas kinetics, fermentation, degradability, methane production, and microbial population using in vitro gas technique

The purpose of the current study was to evaluate the impact of various doses of microencapsulated lemongrass and mangosteen peel (MELM) on gas dynamics, rumen fermentation, degradability, methane production, and microbial population in in vitro gas experiments. With five levels of microencapsulated-phytonutrient supplementation at 0, 1, 2, 3, and 4% of substrate, 0.5 g of roughage, and a concentrate ratio of 60:40, the trial was set up as a completely randomized design. Under investigation, the amount of final asymptotic gas volume was corresponding responded to completely digested substrate (b) increased cubically as a result of the addition of MELM (P < 0.01) and a cubic rise in cumulative gas output. The amount of MELM form did not change the pH and NH3-N concentration of the rumen after 12 and 24 h of incubation. However, methane production during 24 h of incubation, the levels were cubically decreased with further doses of MELM (P < 0.01) at 12 h of incubation. Increasing the dosage of MELM supplementation at 2% DM resulted in a significant increase in the digestibility of in vitro neutral detergent fiber (IVNDF) and in vitro true digestibility (IVTD) at various incubation times (P < 0.05), but decreased above 3% DM supplementations. Moreover, the concentration of propionic acid (C3) exhibited the variations across the different levels of MELM (P < 0.05), with the maximum concentration obtained at 2% DM. The populations of Fibrobacter succinogenes, Ruminococcus albus, Ruminococcus flavefaciens, and Megasphaera elsdenii revealed a significant increase (P < 0.05), while the quantity of Methanobacteriales decreased linearly with increasing doses of MELM. In conclusion, the inclusion of MELM at a concentration of 2% DM in the substrate which could enhance cumulative gas production, NDF and true digestibility, C3 production, and microbial population, while reducing methane concentration and Methanobacterial abundance.

Improving the storage and oxidative stability of essential fatty acids by different encapsulation methods; a review

Linoleic acid and α-linolenic acid are the only essential fatty acids (EFAs) known to the human body. Other fatty acids (FAs) of the omega-6 and omega-3 families originate from linoleic acid and α-linolenic acid, respectively, by the biological processes of elongation and desaturation. In diets with low fish consumption or vegetarianism, these FAs play an exclusive role in providing two crucial FAs for maintaining our body's vital functions; docosahexaenoic acid and arachidonic acid. However, these polyunsaturated FAs are inherently sensitive to oxidation, thereby adversely affecting the storage stability of oils containing them. In this study, we reviewed encapsulation as one of the promising solutions to increase the stability of EFAs. Accordingly, five main encapsulation techniques could be classified: (i) spray drying, (ii) freeze drying, (iii) emulsification, (iv) liposomal entrapment, and (v) other methods, including electrospinning/spraying, complex coacervation, etc. Among these, spray drying was the frequently applied technique for encapsulation of EFAs, followed by freeze dryers. In addition, maltodextrin and gum Arabic were the main wall materials in carriers. Paying attention to industrial scalability and lower cost of the encapsulation process by the other methods are the important aspects that should be given more attention in the future.

Microencapsulation of Mitragyna leaf extracts to be used as a bioactive compound source to enhance in vitro fermentation characteristics and microbial dynamics

OBJECTIVE

Mitragyna speciosa Korth is traditionally used in Thailand. They have a high level of antioxidant capacities and bioactive compounds, the potential to modulate rumen fermentation and decrease methane production. The aim of the study was to investigate the different levels of microencapsulated-Mitragyna leaves extracts (MMLE) supplementation on nutrient degradability, rumen ecology, microbial dynamics, and methane production in an in vitro study.

METHODS

A completely randomized design was used to assign the experimental treatments, MMLE was supplemented at 0%, 4%, 6%, and 8% of the total dry matter (DM) substrate.

RESULTS

The addition of MMLE significantly increased in vitro dry matter degradability both at 12, 24, and 48 h, while ammonia-nitrogen (NH3-N) concentration was improved with MMLE supplementation. The MMLE had the greatest propionate and total volatile fatty acid production when added with 6% of total DM substrate, while decreased the methane production (12, 24, and 48 h). Furthermore, the microbial population of cellulolytic bacteria and Butyrivibrio fibrisolvens were increased, whilst Methanobacteriales was decreased with MMLE feeding.

CONCLUSION

The results indicated that MMLE could be a potential alternative plant-based bioactive compound supplement to be used as ruminant feed additives.

Encapsulation of Cumin (Cuminum cyminum L.) Seed Essential Oil in the Chickpea Protein-Maltodextrin Matrix

Isoelectrically precipitated chickpea protein isolate (CPI) and its combination with maltodextrin (MD) were investigated for the ability to form and stabilize cumin seed oil emulsions. Solubility, net surface charge, emulsion activity/stability indices, and creaming stability of CPI at a pH of 3.0-9.0 were evaluated. Optimum conditions for minimum cream separation were identified as: 0.19% CPI and 6.83% oil concentrations. Cumin (Cuminum cyminum L.) seed essential oil was microencapsulated within the CPI-MD matrix via spray drying. Effects of CPI-MD matrix formulation on the physicochemical characteristics and volatile composition of the microencapsules were investigated. CPI-MD matrices had positive effects on microcapsule properties such as relatively lower surface oil, higher encapsulation efficiency (EE), and oil retention. Approximately 86.6-96.4% oil retention and 90.9-98.4% EE were achieved. Optimum conditions for maximized oil retention (92.9%) and EE (98.6%) were identified as: 2.1% CPI, 14.8% essential oil, and 35% MD. GC-MS analysis of microcapsules was carried out to determine the changes in volatile composition during spray drying. Cymene, α-pinene, β-pinene, sabinene, terpinene, terpineol, phellandrene, and cumin aldehyde were determined as the major components. Optimized design showed the highest EE and minimal changes in the volatile composition of cumin seed essential oil.

Natural carriers: Recent advances in their use to improve the stability and bioaccessibility of food active compounds

In the last decades, the incorporation of bioactive compounds in food supplements aroused the attention of scientists. However, these ingredients often exhibit both low solubility and stability and their poor bioaccessibility within the gastrointestinal tract limits their effectiveness. To overcome these drawbacks, many carriers have been investigated for encapsulating nutraceuticals and enhancing their bioavailability. It is note that several different vegetable wall materials have been applied to build delivery systems. Considering their encapsulation mechanism, lipid and protein-based carriers display specific interaction patterns with bioactives, whereas polysaccharidic-based carriers can entrap them by creating porous highly stable networks. To maximize the encapsulation efficiency, mixed systems are very promising. Following the current goal of using natural and sustainable ingredients, only a limited number of studies about the isolation of new ingredients from agro-food waste are available. In this review, a comprehensive overview of the state of art in the development of innovative natural lipid-, protein- and polysaccharide-based plant carriers is presented, focusing on their application as food active compounds. Different aspects to be considered in the design of delivery systems are discussed, including the carrier structure and chemical features, the interaction between the encapsulating and the core material, and the parameters affecting bioactives entrapment.

Extraction, Characterization, and Chitosan Microencapsulation of Bioactive Compounds from Cannabis sativa L., Cannabis indica L., and Mitragyna speiosa K

The objective of the research was to investigate the bioactive compounds of herbal plant leaves by microencapsulation technique for future application as a feed additive. In this experiment, three herbal plant leaves, namely Cannabis sativa L., Cannabis indica L., and Mitragyna speiosa K., were comparatively investigated using different methods to extract their bioactive compounds. Two methods were used to extract the bioactive compounds: microwave extraction (water-heating transferred) and maceration extraction (methanol extracted). The results obtained using microwave extraction revealed that the total polyphenolic and flavonoid contents and antioxidant capacity were significantly higher and stronger, respectively, than those produced by the maceration extraction method (p < 0.05). Furthermore, the spray-drying technique was employed to enhance the extracted compounds by encapsulation with chitosan through ionic gelation properties. The physical characteristics of chitosan-encapsulated substrates were examined under a scanning electron microscope (SEM) and were as microparticle size (1.45 to 11.0 µm). The encapsulation efficiency of the bioactive compounds was found to be 99.7, 82.3, and 54.6% for microencapsulated M. speiosa, C. indica, and C. sativa, respectively. Therefore, microwave treatment prior to chitosan encapsulation of leaf extracts resulted in increased recovery of bioactive compound encroachment.

Nanoencapsulation of essential oils from industrial hemp (Cannabis sativa L.) by-products into alfalfa protein nanoparticles

Essential oils of industrial hemp (Cannabis sativa L.) by-products (HBEO) were characterized by gas chromatography-mass spectrometry (GC-MS); then, encapsulated in alfalfa protein isolate nanoparticles (API-NPs) as a novel nanocarrier. A desirable retention (45.5-63.4%) of HBEO within API-NPs was confirmed. These nanoparticles exhibited a shrunk and globular shape with a size range of 156.9-325.9 nm as indicated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Furthermore, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and thermal analyses corroborated that HBEO was successfully encapsulated within API NPs in an amorphous form without specific chemical interaction with the carrier matrix. The antioxidant activity of loaded HBEO into API-NPs was higher than free HBEO implying that encapsulation of HBEO in API-NPs was an efficient strategy for improving its stability and functionality. HBEO-loaded API-NPs is a promising candidate to be used in future foods and supplements for novel applications.

Effect of high-intensity ultrasonic treatment on the emulsion of hemp seed oil stabilized with hemp seed protein

In this study, hemp seed oil (HSO) emulsions stabilized with hemp seed protein (HPI) were prepared and treated with high intensity ultrasonic (HIU). The effects of different treatment powers (0, 150, 300, 450, 600 W) on the properties, microstructure and stability of emulsions were investigated. HIU-treated emulsions showed improved emulsifying activity index and emulsifying stability index, reduced particle size, and increased absolute values of ζ-potential, with the extreme points of these indices occurring at a treatment power of 450 W. Here, the emulsion showed the best dispersion and the smallest particle size in fluorescence microscopy observation, with the highest adsorbed protein content (30.12%), and the highest tetrahydrocannabinol (THC) retention rate (87.64%). The best thermal and oxidative stability of the emulsions were obtained under HIU treatment with a power of 450 W. The D₄₃ and the peroxide values (POV) values after 30 d storage were the smallest at 985.74 ± 64.89 nm and 4.6 μmol/L, respectively. Therefore, 450 W was optimal HIU power to effectively improve the properties of HPI-stabilized HSO emulsion and promote the application of HSO and its derivatives in food processing production.

Optimization of Spray-Drying Process Parameters to Study Anti-Sticking Effect of Hydroxypropyl Methyl Cellulose-VLV on Corni fructus Extracts

To prevent the sticking of Corni fructus extract (CFE) during spray drying, the anti-sticking effects of different excipients were compared. Hydroxypropyl methylcellulose (HPMC)-VLV showed a higher powder yield at a lower dosage (8% of total solids), and a lower solution viscosity, compared with HPMC-E5. Therefore, HPMC-VLV is a more effective excipient for reducing CFE sticking during spray drying. The spray-drying process parameters were optimized by central composite rotatable design/response surface methodology, and spray drying was conducted under the following conditions: Inlet air temperature, 126 °C; atomization pressure, 1.05 bar; pump speed, 7.7 mL/min. Scanning electron microscopy showed that the powder comprised shrunken spherical particles with particle sizes in the range of 2-30 μm. Analysis of dynamic surface tension and chemical elements on the powder surface showed that HPMC-VLV rapidly moved to the droplet surface owing to its surface activity. HPMC covered the droplet surface and reduced surface tension, achieving an anti-sticking effect. In conclusion, HPMC-VLV at a solid content of 8% significantly improved the spray drying and reduced sticking of CFE. The spray-drying process parameters were nonlinearly related to the dry product yield. Graphical Abstract.

Whey Proteins as a Potential Co-Surfactant with Aesculus hippocastanum L. as a Stabilizer in Nanoemulsions Derived from Hempseed Oil

The use of natural surfactants including plant extracts, plant hydrocolloids and proteins in nanoemulsion systems has received commercial interest due to demonstrated safety of use and potential health benefits of plant products. In this study, a whey protein isolate (WPI) from a byproduct of cheese production was used to stabilize a nanoemulsion formulation that contained hempseed oil and the Aesculus hippocastanum L. extract (AHE). A Box-Behnken experimental design was used to set the formulation criteria and the optimal nanoemulsion conditions, used subsequently in follow-up experiments that measured specifically emulsion droplet size distribution, stability tests and visual quality. Regression analysis showed that the concentration of HSO and the interaction between HSO and the WPI were the most significant factors affecting the emulsion polydispersity index and droplet size (nm) (p < 0.05). Rheological tests, Fourier transform infrared spectroscopy (FTIR) analysis and L*a*b* color parameters were also taken to characterize the physicochemical properties of the emulsions. Emulsion systems with a higher concentration of the AHE had a potential metabolic activity up to 84% in a microbiological assay. It can be concluded from our results that the nanoemulsion system described herein is a safe and stable formulation with potential biological activity and health benefits that complement its use in the food industry.

Microencapsulation of Anthocyanins—Critical Review of Techniques and Wall Materials

Anthocyanins are value-added food ingredients that have health-promoting impacts and biological functionalities. Nevertheless, there are technological barriers to their application in the food industry, mainly because of their poor stability and susceptibility to harsh environmental conditions, such as oxygen, temperature, pH, and light, which could profoundly influence the final food product′s physicochemical properties. Microencapsulation technology is extensively investigated to enhance stability, bioaccessibility, and impart controlled release properties. There are many varieties of microencapsulation methods and diverse types of wall materials. However, choosing a proper approach involves considering the processing parameters, equipment availability, and application purposes. The present review thoroughly scrutinizes anthocyanins′ chemical structure, principles, benefits, and drawbacks of different microencapsulation methods, including spray drying, freeze drying, electrospinning/electrospraying, inclusion complexes, emulsification, liposomal systems, ionic gelation, and coacervation. Furthermore, wall materials applied in different techniques plus parameters that affect the powders′ encapsulation efficiency and physicochemical properties are discussed. Future studies should focus on various processing parameters and the combination of different techniques and applications regarding microencapsulated anthocyanins in functional foods to assess their stability, efficiency, and commercialization potentials.

Formulation and Evaluation of Spray-Dried Reconstituted Flaxseed Oil-in-Water Emulsions Based on Flaxseed Oil Cake Extract as Emulsifying and Stabilizing Agent

Spray drying of emulsions is a promising way of increasing their durability, offering the possibility of reconstitution, with the addition of water. The present study aimed to examine the properties of flaxseed oil cake extract (FOCE) as an emulsifying and stabilizing agent for spray-dried reconstituted oil-in-water emulsions. Maltodextrin: starch: flaxseed oil emulsions with FOCE or distilled water as liquid phases, and 10% and 20% of oil were spray-dried at 180 °C. The solubility, flowability, cohesiveness, bulk, and tapped densities of the spray-dried powders were analyzed. Additionally, the characteristics of initial and reconstituted emulsions, such as stability, creaming index, color, particle size, and rheological properties were evaluated. Results showed that FOCE could be an adequate emulsifier for spray-dried emulsions with a high oil content providing high stability after reconstitution, when compared to emulsions based only on maltodextrin–starch wall material with water as the liquid phase. This study showed an encouraging way for producing natural and plant-based spray-dried oil-loaded emulsions for food applications.