The Effect of the HLB Value of Sucrose Ester on Physiochemical Properties of Bigel Systems

Dual functionality of diacylglycerols in water-in-oil emulsion gel systems

Distearin (DS) can be used as an emulsifier, due to its surface activity derived from the amphiphilic nature of the molecule, moreover, it can also crystallize and form a 3D crystal network that can induce oil gelation. The current research aimed to examine the ability to combine both emulsifying and oil gelation properties to structure and stabilize water-in-oil emulsion gel system. Different water contents and DS concentrations produce emulsion gels with different textural attributes while incorporating up to 30% of water in a 15% wt. DS-based oleogel resulted in stable white gels. Microscopy imaging confirmed the formation of a water-in-oleogel type emulsion gel characterized by DS crystallization in the continuous phase and at the interface through Pickering mechanism. A positive relation was observed between the G' and hardness values and water content, suggesting gel strengthening resulted from interactions between the DS crystals at the interface and the continuous phase, as suggested by the active filler theory. Thermal analysis revealed two broad melting events at the temperature range of 42.2-44.9 °C and 55.9-58.6 °C for emulsion gels with 10-30% water content, suggesting initial melting of β' polymorph and transition to β during melting, which was confirmed by XRD. The results showed that homogenization significantly improved the oil retention of the gels due to increased crystal surface area, while water addition slightly reduced it. Compared with traditional emulsions or oleogels, this water-in-oil gel system demonstrated prolonged stability and enhanced mechanical properties due to the dual functionality of DS at the water/oil interface and bulk.

Novel bigels based on walnut oil oleogel and chitosan hydrogel: Preparation, characterization, and application as food spread

This study developed new biphasic gel systems containing a walnut oil-based oleogel and a chitosan hydrogel and evaluated the application on food spread. The effects of different oleogelators [γ-oryzanol/β-sitosterol (γ-ORY/β-SIT), candelilla wax/span 65 (CW/SA), and mono- and diglycerides of fatty acids] were explored. Rheological analysis showed that γ-ORY/β-SIT-based bigel had the strongest gel strength, but XRD confirmed that β' crystal form (d = 3.72 Å, 4.12 Å) was predominantly in the CW/SA-based bigel, which was more appropriate for application as spread. The characteristics of CW/SA-based bigel with different oleogel fractions (40-80 wt%) were investigated. The microscopic images indicated that the hydrogels were dispersed as small droplets in the oleogels after oleogel fraction reaching 60 %. The highest crystallinity was achieved when the oleogel fraction was 60 %, and its oil binding capacity was 96.49 %. Textural analysis showed that the CW/SA-based bigel (OG-60 %) had similar properties with commercial spread B, and can be used as a partial replacement for spread B. Replacing 75 % of the commercial spread B with the bigel was found to be optimal and displayed acceptable sensory features. This study developed a healthy bigel based on walnut oil and provided the in-depth information for bigels as an alternative to plastic fats.

Flexible control of bigel microstructure for enhanced stability and flavor release during oral consumption

Edible delivery systems such as emulsions and gels that possess flexible oral flavor sensation and comprehensive stability under freeze-thaw processing are highly demanded in the frozen food industry. Bigels were fabricated via emulsification of stearic acid based oleogel with konjac glucomannan (KGM)-gelatin (G) based binary hydrogel. By varing the KGM/G mass ratio (γ) and oleogel/hydrogel volume ratio (φ) of bigels, modulation over the micromorphology, tribology, flavor sensation and cheese stick imitating capacity were achieved. Notably, as φ increased from O4:W6 to O5:W5, the microstructural transformation from oleogel-in-hydrogel to bicontinuous morphology emerged as a remarkable feature. The influence of γ was evident in bicontinuous bigels, significantly enhancing water holding capacity (WHC) by 3.38-fold as γ transitioned from 1KGM:5G to 6KGM:5G during freeze-thaw cycles. φ and γ both played pivotal roles in altering the microstructure and rheological properties of the bigels, enabling customizable release of bioactive components and flavor perception. Oleogel-in-hydrogel bigels effectively prevented bioactive compound leakage during freeze-thaw conditions, while bicontinuous bigels demonstrated sustained flavor release during oral mastication. Release behaviors were dual-controlled by φ and γ, reducing oil-soluble flavor release with increased φ and lowering hydrophilic volatile release with elevated γ. Moreover, bigel-based cheese sticks showcased lower viscosity, higher creep recovery rates, and enhanced mouthfeel during minimal oral chewing, suggesting their potential in mimicking the properties of commercial counterparts. These findings extend insights into bigel design for tailored flavor release and bioactive preservation in food products.

Sucrose Esters and Beeswax Synergize to Improve the Stability and Viscoelasticity of Water-in-Oil Emulsions

W/O emulsions are commonly used to prepare stable low-fat products, but their poor stability limits widespread applications. In this study, sucrose ester (SE) and beeswax were utilized to prepare an oil dispersion system in rapeseed oil, which was used as the external oil phase to further synergistically construct the W/O emulsion systems. The results show that spherical and fine crystals are formed under the synergistic effect of SE and BW (1.5 SE:0.5 BW). In this state, a dense interfacial crystal layer was easily formed, preventing droplet aggregation, leading to droplet size reduction (1-2 μm) and tight packing, improving viscoelasticity and resistance to deformation, and increasing the recovery rate (52.26%). The long-term stability of W/O emulsions containing up to 60 wt% water was found to be more than 30 days. The increase in the aqueous phase led to droplet aggregation, which increased the viscosity (from 400 Pa·s to 2500 Pa·s), improved the structural strength of the emulsion, and increased the width of the linear viscoelastic region (from 1% strain to 5% strain). These findings provide some technical support for the further development of stable low-fat products.

Bigels as Delivery Systems: Potential Uses and Applicability in Food

Bigels have been mainly applied in the pharmaceutical sector for the controlled release of drugs or therapeutics. However, these systems, with their intricate structures, hold great promise for wider application in food products. Besides their classical role as carrier and target delivery vehicles for molecules of interest, bigels may also be valuable tools for building complex food structures. In the context of reducing or even eliminating undesirable (but often highly functional) food components, current strategies often critically affect food structure and palatability. The production of solid fat systems that are trans-fat-free and have high levels of unsaturated fatty acids is one of the challenges the food industry currently faces. According to recent studies, bigels can be successfully used as ingredients for total or partial solid fat replacement in complex food matrices. This review aims to critically assess current research on bigels in food and pharmaceutical applications, discuss the role of bigel composition and production parameters on the characteristics of bigels and further expand the use of bigels as solid fat replacers and functional food ingredients. The hydrogel:oleogel ratio, selected gelators, inclusion of surfactants and encapsulation of molecules of interest, and process parameters (e.g., temperature, shear rate) during bigel production play a crucial role in the bigel's rheological and textural properties, microstructure, release characteristics, biocompatibility, and stability. Besides exploring the role of these parameters in bigel production, future research directions for bigels in a food context are explored.

Fabrication and Characterization of Novel Food-Grade Bigels Based on Interfacial and Bulk Stabilization

Novel food-grade bigels were fabricated using zein nanoparticles for interfacial stabilization and non-surfactant gelators (beeswax and tapioca) for bulk stabilization. The present study demonstrated the importance of interfacial stability for biphasic gels and sheds light on the roles of the gelation mechanism and the oil/water ratio of a bigel on its microstructure, physical properties, and digestion behaviors. The results indicated that it is not an easy task to realize homogenization and subsequent gelation in beeswax-tapioca biphasic systems, as no amphiphilic components existed. However, applying the binding of zein nanoparticles at the oil-water interface allowed us to produce a homogeneous and stable bigel (oil fraction reach 40%), which exhibited enhanced structural and functional properties. Oleogel structures play a crucial role in determining the deformation response of bigel systems. As the oil content increased, the mechanical strength and elastic properties of bigels were enhanced. In the meantime, clear bigel-type transitions were observed. In addition, the fabricated bigels were shown to be beneficial for delayed digestion, and the lowest degree of lipolysis could be found in bigel with 50% oleogel.

Synthesis and characterization of a lactose-based biosurfactant by a novel nanodendritic catalyst and evaluating its efficacy as an emulsifier in a food emulsion system

Nonionic lactose fatty acid esters are a class of synthetic biosurfactants with various uses in the food, pharmaceutical, personal care, and cosmetic industries. The objective of this research was the preparation and full characterization of a series of novel metallic encapsulated magnetic core/dendrimer shell composites as catalysts (CoII/MnII G2.0L1/2@SCMBNP) and their use in the chemo- and regioselective synthesis of a biosurfactant for the first time. Surface-active properties (such as contact angle (CA), surface tension (SFT), interfacial tension (IFT), critical micelle concentration (CMC), hydrophilic-lipophilic balance (HLB), foamability (FA) & foam stability (FS), emulsion ability (EmA) & emulsion stability (EmS), surface excess (Γ) and free energy of adsorption (ΔG) were also determined for all synthesized biosurfactants. In comparison to other works, these results suggested that the synthesized lactose fatty acid esters have potential application as synthetic emulsifiers featuring surface properties and are comparable with Ryoto sugar ester L-1695 (sucrose laurate) & Tween-20 (polysorbate 20) as industrial emulsifiers. The optimized conditions for biosurfactant syntheses are 8 days at 2 : 1 molar ratio of lactose sugar to lauric acid at 50 °C. Lactose ester as a biosurfactant exhibited a decrease of SFT & IFT and was able to stabilize a 20% soybean O/W emulsion. Furthermore, high conversion & yield, excellent chemo- and regioselectivity, and high operational stability over 5 runs were achieved for CoII/MnII-G2.0L1/2@SCMBNP, indicating the suitable efficiency of the catalytic process.

Effect of Potato Starch Hydrogel:Glycerol Monostearate Oleogel Ratio on the Physico-Rheological Properties of Bigels

Bigel (BG) has been shown to be promising for the food industry due to the possibility to manipulate the properties of the system by adjusting the ratio of each individual phase, namely the hydrogel (H) and oleogel (O) phases. This work aimed to evaluate the influence of the O:H ratio on the physical-rheological properties of BG produced with potato starch (PS) and glycerol monostearate (GM). The hydrogel hardness (i.e., 1423.47 g) directly influenced the viscosity of the BG samples, as BG with a higher H-phase presented the highest viscosity and firmness. All BG samples presented shear-thinning behavior and structural breakdown at ~50 °C. BG with a higher O-phase had superior results for thermal stability, softer texture, and yield stress values, representative of good plasticity and spreadability, as compared to BG with less O-phase. The BG with 80% H-phase was less stable during the 21 days of storage in relation to the other BG samples. This study showed the role that the O:H ratio plays in the development of PS-GM-based BGs with tailor-made physical-rheological properties. In addition, the BG is an easily reproduced system with great potential to be used as a trans and saturated fat substitute in food applications.

Effects of Sorbitan Monostearate and Stearyl Alcohol on the Physicochemical Parameters of Sunflower-Wax-Based Oleogels

A rising health concern with saturated fatty acids allowed researchers to look into the science of replacing these fats with unsaturated fatty acids. Oleogelation is a technique to structure edible oil using gelators. The present study looked for the effect of solid emulsifiers; namely, sorbitan monostearate (SP) and stearyl alcohol (SA), on the physicochemical parameters of oleogels. All the oleogels were formulated using 5% sunflower wax (SW) in sunflower oil (SO). The formulated oleogels displayed irregular-shaped wax crystals on their surface. The bright-field and polarized microscopy showed the fiber/needle network of wax crystals. Formulations consisting of 10 mg (0.05% w/w) of both the emulsifiers (SA10 and SP10) in 20 g of oleogels displayed the appearance of a dense wax crystal network. The SP and SA underwent co-crystallization with wax molecules, which enhanced crystal growth and increased the density and size of the wax crystals. The XRD and FTIR studies suggested the presence of a similar β’ polymorph to that of the triacylglycerols’ arrangement. The incorporation of SA and SP in wax crystal packing might have resulted in a lower crystallization rate in SA10 and SP10. Evaluation of the thermal properties of oleogels through DSC showed better gel recurrence of high melting enthalpy. These formulations also displayed a sustained release of curcumin. Despite the variations in several properties (e.g., microstructures, crystallite size, thermal properties, and nutrient release), the emulsifiers did not affect the mechanical properties of the oleogel. The meager amounts of both the emulsifiers were able to modulate the nutrient release from the oleogels without affecting their mechanical properties in comparison to the control sample.

Multicompartment Hydrogels

Hydrogels belong to the most promising materials in polymer and materials science at the moment. As they feature soft and tissue-like character as well as high water-content, a broad range of applications are addressed with hydrogels, e.g. tissue engineering and wound dressings but also soft robotics, drug delivery, actuators and catalysis. Ways to tailor hydrogel properties are crosslinking mechanism, hydrogel shape and reinforcement, but new features can be introduced by variation of hydrogel composition as well, e.g. via monomer choice, functionalization or compartmentalization. Especially, multicompartment hydrogels drive progress towards complex and highly functional soft materials. In the present review the latest developments in multicompartment hydrogels are highlighted with a focus on three types of compartments, i.e. micellar/vesicular, droplets or multi-layers including various sub-categories. Furthermore, several morphologies of compartmentalized hydrogels and applications of multicompartment hydrogels will be discussed as well. Finally, an outlook towards future developments of the field will be given. The further development of multicompartment hydrogels is highly relevant for a broad range of applications and will have a significant impact on biomedicine and organic devices. This article is protected by copyright. All rights reserved.

Bigels as drug delivery systems: From their components to their applications

Bigels are systems that usually result from mixing a hydrogel and an organogel: the aqueous phase is commonly formed by a hydrophilic biopolymer, whereas the organic phase comprises a gelled vegetable oil because of the presence of an organogelator. The proportion of the corresponding gelling agent in each phase, the organogel/hydrogel ratio, and the mixing temperature and speed all need to be taken into consideration for bigel manufacturing. Bigels, which are particularly useful drug delivery systems, have already been formulated for transdermal, buccal, and vaginal routes. Mechanical assessments and microscopy are the most reported characterization techniques. As we review here, their composition and unique structure confer promising drug delivery attributes, such as mucoadhesion, the ability to control drug release, and the possibility of including both hydrophilic and lipophilic drugs in the same system.

Carbopol-olive oil-based bigel drug delivery system of doxycycline hyclate for the treatment of acne

OBJECTIVE

The objective of this study was to prepare and evaluate the doxycycline hyclate containing bigel for the effective treatment of acne.

METHODS

Bigels are biphasic systems formed by water-based hydrogels and oil-based organogel. Carbopol 940 was used to prepare the hydrogel phase, whereas Span-60 and olive oil for the oleogel phase.

RESULTS

The microstructure of bigel confirmed the oil in water type emulsion formation. The average droplet size of formulations was found 15-50 µm, and a bell-shaped droplet distribution curve, rheological, or viscosity studies suggested that the consistency and stability of bigel decrease with high organogel concentration. Three formulations (F1, F2, and F3) of the different ratios of hydrogel:oleogel (60:40, 70:30, and 80:20) were prepared in which F1 was less stable compared to F2 and F3. The drug content of F2 and F3 was respectively 79.94 and 71.33%. Formulation F2 was found more effective as compared to F3 based on in vitro drug release studies. Bigel also showed better results during in vivo studies at the rabbit ear model, which reduce acne diameter up to 1.10 mm from 4.9 mm while gel reduced it up to 1.20 mm.