Encapsulation of Biological Agents in Hydrogels for Therapeutic Applications

Engineered Bacteria as Living Biosensors in Dermal Tattoos

Dermal tattoo biosensors are promising platforms for real-time monitoring of biomarkers, with skin used as a diagnostic interface. Traditional tattoo sensors have utilized small molecules as biosensing elements. However, the rise of synthetic biology has enabled the potential employment of engineered bacteria as living analytical tools. Exploiting engineered bacterial sensors will allow for potentially more sensitive detection across a broad biomarker range, with advanced processing and sense/response functionalities using genetic circuits. Here, the interfacing of bacterial biosensors as living analytics in tattoos is shown. Engineered bacteria are encapsulated into micron-scale hydrogel beads prepared through scalable microfluidics. These biosensors can sense both biochemical cues (model biomarkers) and biophysical cues (temperature changes, using RNA thermometers), with fluorescent readouts. By tattooing beads into skin models and confirming sensor activity post-tattooing, our study establishes a foundation for integrating bacteria as living biosensing entities in tattoos.

Hydrogels in Gene Delivery Techniques for Regenerative Medicine and Tissue Engineering

Hydrogels are 3D networks swollen with water. They are biocompatible, strong, and moldable and are emerging as a promising biomedical material for regenerative medicine and tissue engineering to deliver therapeutic genes. The excellent natural extracellular matrix simulation properties of hydrogels enable them to be co-cultured with cells or enhance the expression of viral or non-viral vectors. Its biocompatibility, high strength, and degradation performance also make the action process of carriers in tissues more ideal, making it an ideal biomedical material. It has been shown that hydrogel-based gene delivery technologies have the potential to play therapy-relevant roles in organs such as bone, cartilage, nerve, skin, reproductive organs, and liver in animal experiments and preclinical trials. This paper reviews recent articles on hydrogels in gene delivery and explains the manufacture, applications, developmental timeline, limitations, and future directions of hydrogel-based gene delivery techniques.

Functionality of macrophages encapsulated in porcine decellularized adipose matrix hydrogels and interaction with Candida albicans

Extracellular matrix hydrogels are considered one of the most suitable biomaterials for tissue regeneration due to their similarity with the extracellular microenvironment of the native tissue. Their properties are dependent on their composition, material concentration, fiber density and the fabrication approaches, among other factors. The encapsulation of immune cells in this kind of hydrogels, both in absence or presence of a pathogen, represents a promising strategy for the development of platforms that mimic healthy and infected tissues, respectively. In this work, we have encapsulated macrophages in 3D hydrogels of porcine decellularized adipose matrices (pDAMs) without and with the Candida albicans fungus, as 3D experimental models to study the macrophage immunocompetence in a closer situation to the physiological conditions and to mimic an infection scenario. Our results indicate that encapsulated macrophages preserve their functionality within these pDAM hydrogels and phagocytose live pathogens. In addition, their behavior is influenced by the hydrogel pore size, inversely related to the hydrogel concentration. Thus, larger pore size promotes the polarization of macrophages towards M2 phenotype along the time and enhances their phagocytosis capability. It is important to point out that encapsulated macrophages in absence of pathogen showed an M2 phenotype, but macrophages coencapsulated with C. albicans can switch towards an M1 inflammatory phenotype to resolve the infection, depending on the fungus quantity. The present study reveals that pDAM hydrogels preserve the macrophage plasticity, demonstrating their relevance as new models for macrophage-pathogen interaction studies that mimic an infection scenario with application in regenerative medicine research.

Phage-Based antibacterial hydrogels for bacterial targeting and Ablation: Progress and perspective

The emergence of drug-resistant bacteria makes antibiotics inadequate to treat bacterial infections, which is now a global problem. Phage as a virus with specific recognition ability can effectively kill the bacteria, which is an efficacious antibacterial material to replace antibiotics. Phage-based hydrogels have good biocompatibility and antibacterial effect at the site of infection. Phage hydrogels have remarkable antibacterial effects on targeted bacteria because of their specific targeted bactericidal ability, but there are few reports and reviews on phage hydrogels. This paper discusses the construction method of phage-based antibacterial hydrogels (PAGs), summarizes the advantages related to PAGs and their applications in the direction of wound healing, treating bone bacterial infections, gastrointestinal infection treatment and other application, and finally gives an outlook on the development and research of PAGs.

Advances in Hydrogel-Based Drug Delivery Systems

Hydrogels, with their distinctive three-dimensional networks of hydrophilic polymers, drive innovations across various biomedical applications. The ability of hydrogels to absorb and retain significant volumes of water, coupled with their structural integrity and responsiveness to environmental stimuli, renders them ideal for drug delivery, tissue engineering, and wound healing. This review delves into the classification of hydrogels based on cross-linking methods, providing insights into their synthesis, properties, and applications. We further discuss the recent advancements in hydrogel-based drug delivery systems, including oral, injectable, topical, and ocular approaches, highlighting their significance in enhancing therapeutic outcomes. Additionally, we address the challenges faced in the clinical translation of hydrogels and propose future directions for leveraging their potential in personalized medicine and regenerative healthcare solutions.

Injectable Hydrogels: A Paradigm Tailored with Design, Characterization, and Multifaceted Approaches

Biomaterials denoting self-healing and versatile structural integrity are highly curious in the biomedicine segment. The injectable and/or printable 3D printing technology is explored in a few decades back, which can alter their dimensions temporarily under shear stress, showing potential healing/recovery tendency with patient-specific intervention toward the development of personalized medicine. Thus, self-healing injectable hydrogels (IHs) are stunning toward developing a paradigm for tissue regeneration. This review comprises the designing of IHs, rheological characterization and stability, several benchmark consequences for self-healing IHs, their translation into tissue regeneration of specific types, applications of IHs in biomedical such as anticancer and immunomodulation, wound healing and tissue/bone regeneration, antimicrobial potentials, drugs, gene and vaccine delivery, ocular delivery, 3D printing, cosmeceuticals, and photothermal therapy as well as in other allied avenues like agriculture, aerospace, electronic/electrical industries, coating approaches, patents associated with therapeutic/nontherapeutic avenues, and numerous futuristic challenges and solutions.

Immunoprotection of cellular transplants for autoimmune type 1 diabetes through local drug delivery

Type 1 diabetes mellitus (T1DM) is an autoimmune condition that results in the destruction of insulin-secreting β cells of the islets of Langerhans. Allogeneic islet transplantation could be a successful treatment for T1DM; however, it is limited by the need for effective, permanent immunosuppression to prevent graft rejection. Upon transplantation, islets are rejected through non-specific, alloantigen specific, and recurring autoimmune pathways. Immunosuppressive agents used for islet transplantation are generally successful in inhibiting alloantigen rejection, but they are suboptimal in hindering non-specific and autoimmune pathways. In this review, we summarize the challenges with cellular immunological rejection and therapeutics used for islet transplantation. We highlight agents that target these three immune rejection pathways and how to package them for controlled, local delivery via biomaterials. Exploring macro-, micro-, and nano-scale immunomodulatory biomaterial platforms, we summarize their advantages, challenges, and future directions. We hypothesize that understanding their key features will help identify effective platforms to prevent islet graft rejection. Outcomes can further be translated to other cellular therapies beyond T1DM.

Inclusion of konjac glucomannan in pea protein hydrogels improved the rheological and in vitro release properties of the composite hydrogels

In this study, a composite hydrogel consisting of pea protein and konjac glucomannan (KG) was fabricated using three approaches, namely neutral, salt-set, and alkaline gelation. Hydrogels made from pea protein were brittle and weak. The addition of KG improved the elasticity and water holding capacity of the pea protein hydrogels. Concomitantly, a decrease in syneresis rate and swelling of the composite hydrogels was observed. The alkaline-set hydrogels exhibited the highest resilience to strain. Thixotropicity was found to be less pronounced for salt-set hydrogels. Sulphate had a greater positive effect on the structural recovery and negative effect on hysteresis area than chloride due to the greater salting-out effect of the sulphates. The addition of KG facilitated the formation of an interconnected structure with limited mobility of biopolymer chains. A sharp increase in G' and G" during the temperature ramp indicated the predominance of hydrophobic interactions towards the aggregation of biopolymers. The infrared spectra of the hydrogels revealed a change in secondary structure of proteins on addition of KG. A controlled in vitro release of riboflavin was observed in neutral and salt-set hydrogels. The alkaline-set hydrogels exhibited a prolonged gastric retention time, thereby establishing in vitro antacid activity in the gastric environment.

Hydrogels for Gasotransmitter Delivery: Nitric Oxide, Carbon Monoxide, and Hydrogen Sulfide

Gasotransmitters, gaseous signaling molecules including nitric oxide (NO), carbon monoxide (CO), and hydrogen sulfide (H2 S), maintain myriad physiological processes. Low levels of gasotransmitters are often associated with specific problems or diseases, so NO, CO, and H2 S hold potential in treating bacterial infections, chronic wounds, myocardial infarction, ischemia, and various other diseases. However, their clinical applications as therapeutic agents are limited due to their gaseous nature, short half-life, and broad physiological roles. One route toward the greater application of gasotransmitters in medicine is through localized delivery. Hydrogels are attractive biomedical materials for the controlled release of embedded therapeutics as they are typically biocompatible, possess high water content, have tunable mechanical properties, and are injectable in certain cases. Hydrogel-based gasotransmitter delivery systems began with NO, and hydrogels for CO and H2 S have appeared more recently. In this review, the biological importance of gasotransmitters is highlighted, and the fabrication of hydrogel materials is discussed, distinguishing between methods used to physically encapsulate small molecule gasotransmitter donor compounds or chemically tether them to a hydrogel scaffold. The release behavior and potential therapeutic applications of gasotransmitter-releasing hydrogels are also detailed. Finally, the authors envision the future of this field and describe challenges moving forward.

Biomolecules based hydrogels and their potential biomedical applications: A comprehensive review

The need for biocompatible drug carriers has been significantly increased from the past few years. Researchers show great interest in the development of more versatile and sophisticated biomaterials based drug carriers. Hydrogels are beneficial drug carriers and easily release the controlled amount of drug at target site due to its tunable structure. The hydrogels made-up of potent biological macromolecules including collagen, gelatin, fibrin, elastin, fibroin, chitosan, starch, alginate, agarose and carrageenan have been proven as versatile biomaterials. These are three-dimensional polymeric networks, synthesized by crosslinking of hydrophilic polymers. The biological macromolecules based hydrogels containing therapeutic substances are used in a wide range of biomedical applications including wound healing, tissue engineering, cosmetics and contact lenses. However, many aspects related to hydrogels such as the mechanism of cross-linking and molecular entanglement are not clear. So, there is a need to do more research and exploration toward the extensive and cost-effective use of hydrogels. The present review article elaborately discusses the biomolecules based hydrogels and their possible biomedical applications in different fields.

Stimuli-Responsive Hydrogels for Protein Delivery

Proteins and peptides are potential therapeutic agents, but their physiochemical properties make their use as drug substances challenging. Hydrogels are hydrophilic polymeric networks that can swell and retain high amounts of water or biological fluids without being dissolved. Due to their biocompatibility, their porous structure, which enables the transport of various peptides and proteins, and their protective effect against degradation, hydrogels have gained prominence as ideal carriers for these molecules' delivery. Particularly, stimuli-responsive hydrogels exhibit physicochemical transitions in response to subtle modifications in the surrounding environment, leading to the controlled release of entrapped proteins or peptides. This review is focused on the application of these hydrogels in protein and peptide delivery, including a brief overview of therapeutic proteins and types of stimuli-responsive polymers.

Applications of Degradable Hydrogels in Novel Approaches to Disease Treatment and New Modes of Drug Delivery

Hydrogels are particularly suitable materials for loading drug delivery agents; their high water content provides a biocompatible environment for most biomolecules, and their cross-linked nature protects the loaded agents from damage. During delivery, the delivered substance usually needs to be released gradually over time, which can be achieved by degradable cross-linked chains. In recent years, biodegradable hydrogels have become a promising technology in new methods of disease treatment and drug delivery methods due to their many advantageous properties. This review briefly discusses the degradation mechanisms of different types of biodegradable hydrogel systems and introduces the specific applications of degradable hydrogels in several new methods of disease treatment and drug delivery methods.

Solid implantable devices for sustained drug delivery

Implantable drug delivery systems (IDDS) are an attractive alternative to conventional drug administration routes. Oral and injectable drug administration are the most common routes for drug delivery providing peaks of drug concentrations in blood after administration followed by concentration decay after a few hours. Therefore, constant drug administration is required to keep drug levels within the therapeutic window of the drug. Moreover, oral drug delivery presents alternative challenges due to drug degradation within the gastrointestinal tract or first pass metabolism. IDDS can be used to provide sustained drug delivery for prolonged periods of time. The use of this type of systems is especially interesting for the treatment of chronic conditions where patient adherence to conventional treatments can be challenging. These systems are normally used for systemic drug delivery. However, IDDS can be used for localised administration to maximise the amount of drug delivered within the active site while reducing systemic exposure. This review will cover current applications of IDDS focusing on the materials used to prepare this type of systems and the main therapeutic areas of application.

Aloe vera-Based Hydrogels for Wound Healing: Properties and Therapeutic Effects

Aloe vera-based hydrogels have emerged as promising platforms for the delivery of therapeutic agents in wound dressings due to their biocompatibility and unique wound-healing properties. The present study provides a comprehensive overview of recent advances in the application of Aloe vera-based hydrogels for wound healing. The synthesis methods, structural characteristics, and properties of Aloe vera-based hydrogels are discussed. Mechanisms of therapeutic agents released from Aloe vera-based hydrogels, including diffusion, swelling, and degradation, are also analyzed. In addition, the therapeutic effects of Aloe vera-based hydrogels on wound healing, as well as the reduction of inflammation, antimicrobial activity, and tissue regeneration, are highlighted. The incorporation of various therapeutic agents, such as antimicrobial and anti-inflammatory ones, into Aloe vera-based hydrogels is reviewed in detail. Furthermore, challenges and future prospects of Aloe vera-based hydrogels for wound dressing applications are considered. This review provides valuable information on the current status of Aloe vera-based hydrogels for the delivery of therapeutic agents in wound dressings and highlights their potential to improve wound healing outcomes.

Generation of Photopolymerized Microparticles Based on PEGDA Hydrogel Using T-Junction Microfluidic Devices: Effect of the Flow Rates

The formation of microparticles (MPs) of biocompatible and biodegradable hydrogels such as polyethylene glycol diacrylate (PEGDA) utilizing microfluidic devices is an attractive option for entrapment and encapsulation of active principles and microorganisms. Our research group has presented in previous studies a formulation to produce these hydrogels with adequate physical and mechanical characteristics for their use in the formation of MPs. In this work, hydrogel MPs are formed based on PEGDA using a microfluidic device with a T-junction design, and the MPs become hydrogel through a system of photopolymerization. The diameters of the MPs are evaluated as a function of the hydrodynamic condition flow rates of the continuous (Qc) and disperse (Qd) phases, measured by optical microscopy, and characterized through scanning electron microscopy. As a result, the following behavior is found: the diameter is inversely proportional to the increase in flow in the continuous phase (Qc), and it has a significant statistical effect that is greater than that in the flow of the disperse phase (Qd). While the diameter of the MPs is proportional to Qd, it does not have a significant statistical effect on the intervals of flow studied. Additionally, the MPs' polydispersity index (PDI) was measured for each experimental hydrodynamic condition, and all values were smaller than 0.05, indicating high homogeneity in the MPs. The microparticles have the potential to entrap pharmaceuticals and microorganisms, with possible pharmacological and bioremediation applications.

Design of Phage-Cocktail-Containing Hydrogel for the Treatment of Pseudomonas aeruginosa-Infected Wounds

Recently, the treatment of infected wounds has become a global problem due to increased antibiotic resistance in bacteria. The Gram-negative opportunistic pathogen Pseudomonas aeruginosa is often present in chronic skin infections, and it has become a threat to public health as it is increasingly multidrug resistant. Due to this, new measures to enable treatment of infections are necessary. Treatment of bacterial infections with bacteriophages, known as phage therapy, has been in use for a century, and has potential with its antimicrobial effect. The main purpose of this study was to create a phage-containing wound dressing with the ability to prevent bacterial infection and rapid wound healing without side effects. Several phages against P. aeruginosa were isolated from wastewater, and two polyvalent phages were used to prepare a phage cocktail. The phage cocktail was loaded in a hydrogel composed of polymers of sodium alginate (SA) and carboxymethyl cellulose (CMC). To compare the antimicrobial effects, hydrogels containing phages, ciprofloxacin, or phages plus ciprofloxacin were produced, and hydrogels without either. The antimicrobial effect of these hydrogels was investigated in vitro and in vivo using an experimental mouse wound infection model. The wound-healing process in different mouse groups showed that phage-containing hydrogels and antibiotic-containing hydrogels have almost the same antimicrobial effect. However, in terms of wound healing and pathological process, the phage-containing hydrogels performed better than the antibiotic alone. The best performance was achieved with the phage-antibiotic hydrogel, indicating a synergistic effect between the phage cocktail and the antibiotic. In conclusion, phage-containing hydrogels eliminate efficiently P. aeruginosa in wounds and may be a proper option for treating infectious wounds.

Polyampholyte-Based Polymer Hydrogels for the Long-Term Storage, Protection and Delivery of Therapeutic Proteins

Protein storage and delivery are crucial for biomedical applications such as protein therapeutics and recombinant proteins. Lack of proper protocols results in the denaturation of proteins, rendering them inactive and manifesting undesired side effects. In this study, polyampholyte-based (succinylated ε-poly-l-lysine) hydrogels containing polyvinyl alcohol and polyethylene glycol polymer matrices to stabilize proteins are developed. These hydrogels facilitated the loading and release of therapeutic amounts of proteins and withstood thermal and freezing stress (15 freeze-thaw cycles and temperatures of -80 °C and 37 °C), without resulting in protein denaturation and aggregation. To the best of our knowledge, this strategy has not been applied to the design of hydrogels constituting polymers, (in particular, polyampholyte-based polymers) which have inherent efficiency to stabilize proteins and protect them from denaturation. Our findings can open up new avenues in protein biopharmaceutics for the design of materials that can store therapeutic proteins long-term under severe stress and safely deliver them.

Stimuli-Responsive and Antibacterial Cellulose-Chitosan Hydrogels Containing Polydiacetylene Nanosheets

Herein, we report a stimuli-responsive hydrogel with inhibitory activity against Escherichia coli prepared by chemical crosslinking of carboxymethyl chitosan (CMCs) and hydroxyethyl cellulose (HEC). The hydrogels were prepared by esterification of chitosan (Cs) with monochloroacetic acid to produce CMCs which were then chemically crosslinked to HEC using citric acid as the crosslinking agent. To impart a stimuli responsiveness property to the hydrogels, polydiacetylene-zinc oxide (PDA-ZnO) nanosheets were synthesized in situ during the crosslinking reaction followed by photopolymerization of the resultant composite. To achieve this, ZnO was anchored on carboxylic groups in 10,12-pentacosadiynoic acid (PCDA) layers to restrict the movement of the alkyl portion of PCDA during crosslinking CMCs and HEC hydrogels. This was followed by irradiating the composite with UV radiation to photopolymerize the PCDA to PDA within the hydrogel matrix so as to impart thermal and pH responsiveness to the hydrogel. From the results obtained, the prepared hydrogel had a pH-dependent swelling capacity as it absorbed more water in acidic media as compared to basic media. The incorporation of PDA-ZnO resulted in a thermochromic composite responsive to pH evidenced by a visible colour transition from pale purple to pale pink. Upon swelling, PDA-ZnO-CMCs-HEC hydrogels had significant inhibitory activity against E. coli attributed to the slow release of the ZnO nanoparticles as compared to CMCs-HEC hydrogels. In conclusion, the developed hydrogel was found to have stimuli-responsive properties and inhibitory activity against E. coli attributed to zinc nanoparticles.

Effects of encapsulation methods on bioaccessibility of anthocyanins: a systematic review and meta-analysis

Anthocyanins have multiple health benefits. However, they are prone to degradation during gastrointestinal digestion, impeding their utilization. Various encapsulation systems have been proposed to improve their bioaccessibility and bioavailability. This review aims to provide a systematic evaluation and meta-analysis of published studies examining the effect of microencapsulation on the bioaccessibility of anthocyanins. A comprehensive and systematic literature search of three databases (Scopus, PubMed, and Web of Science) was conducted. Studies were selected according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria and were reviewed independently by two investigators. Overall, 34 articles were included in the systematic review and 24 were included in the meta-analysis. The fold changes in bioaccessibility between encapsulated and non-encapsulated anthocyanins from eligible studies were calculated. The median and 95% confidence intervals (CI) of the fold changes for spray-drying (median 1.23, 95% CI 0.91-1.92), freeze-drying (median 1.19, 95% CI 0.61-1.28), simple coacervation (median 1.80, 95% CI 1.41-3.20), and complex coacervation (median 1.61, 95% CI 0.21-25.00) were calculated. Simple coacervation showed a promising protection against degradation during in vitro digestion. However, when a large number of anthocyanins cannot be released from the microparticles during digestion, encapsulation impedes the bioaccessibility of anthocyanins.

Enzymatic Crosslinked Hydrogels of Gelatin and Poly (Vinyl Alcohol) Loaded with Probiotic Bacteria as Oral Delivery System

Probiotic bacteria are widely used to prepare pharmaceutical products and functional foods because they promote and sustain health. Nonetheless, probiotic viability is prone to decrease under gastrointestinal conditions. In this investigation, Lactiplantibacillus plantarum spp. CM-CNRG TB98 was entrapped in a gelatin−poly (vinyl alcohol) (Gel−PVA) hydrogel which was prepared by a “green” route using microbial transglutaminase (mTGase), which acts as a crosslinking agent. The hydrogel was fully characterized and its ability to entrap and protect L. plantarum from the lyophilization process and under simulated gastric and intestine conditions was explored. The Gel−PVA hydrogel showed a high probiotic loading efficiency (>90%) and survivability from the lyophilization process (91%) of the total bacteria entrapped. Under gastric conditions, no disintegration of the hydrogel was observed, keeping L. plantarum protected with a survival rate of >94%. While in the intestinal fluid the hydrogel is completely dissolved, helping to release probiotics. A Gel−PVA hydrogel is suitable for a probiotic oral administration system due to its physicochemical properties, lack of cytotoxicity, and the protection it offers L. plantarum under gastric conditions.

Multifunctional Composite Hydrogels for Bacterial Capture, Growth/Elimination, and Sensing Applications

Hydrogels are cross-linked networks of hydrophilic polymer chains with a three-dimensional structure. Owing to their unique features, the application of hydrogels for bacterial/antibacterial studies and bacterial infection management has grown in importance in recent years. This trend is likely to continue due to the rise in bacterial infections and antimicrobial resistance. By exploiting their physicochemical characteristics and inherent nature, hydrogels have been developed to achieve bacterial capture and detection, bacterial growth or elimination, antibiotic delivery, or bacterial sensing. Traditionally, the development of hydrogels for bacterial/antibacterial studies has focused on achieving a single function such as antibiotic delivery, antibacterial activity, bacterial growth, or bacterial detection. However, recent studies demonstrate the fabrication of multifunctional hydrogels, where a single hydrogel is capable of performing more than one bacterial/antibacterial function, or composite hydrogels consisting of a number of single functionalized hydrogels, which exhibit bacterial/antibacterial function synergistically. In this review, we first highlight the hydrogel features critical for bacterial studies and infection management. Then, we specifically address unique hydrogel properties, their surface/network functionalization, and their mode of action for bacterial capture, adhesion/growth, antibacterial activity, and bacterial sensing, respectively. Finally, we provide insights into different strategies for developing multifunctional hydrogels and how such systems can help tackle, manage, and understand bacterial infections and antimicrobial resistance. We also note that the strategies highlighted in this review can be adapted to other cell types and are therefore likely to find applications beyond the field of microbiology.

Unravelling the role of hemp straw derived cellulose in CMC/PVA hydrogel for sustained release of fluoroquinolone antibiotic

Cellulose fibres derived from hemp stalks, a prevalent biowaste in Northern India, were effectively converted into carboxymethyl cellulose (HS-CMC). Novel environmentally benign hydrogels were synthesized from HS-CMC and polyvinyl alcohol (PVA) using citric acid, a green crosslinker employing freeze-drying method. The HS-CMC/PVA hydrogels were successfully used for sustained release of fluoroquinolone antibiotic, norfloxacin. The hydrogels were characterized using FTIR, XRD, FE-SEM, EDS and thermal stability and evaluated for their carbonyl content, swelling ratio, in-vitro drug release behaviour and bactericidal properties. Successful isolation of cellulose from hemp stalks and its conversion into hydrogel with the presence of ester and carbonyl linkages was confirmed by FTIR. Thermal stability was impaired when cellulose fibres were converted into HS-CMC via carboxymethylation, as the crystalline structure was utterly disrupted. For the hydrogel, the equilibrium swelling ratios at pH -1.2 and 7.4 were assessed as 378.4 % and 538.7 %, respectively, higher than reported CMC hydrogels. The norfloxacin (NFX) encapsulated hydrogels exhibited good bactericidal properties with zone of inhibition of 19.2 ± 0.3 mm against E. coli and 16.4 ± 0.4 mm against S. aureus. The in-vitro release of NFX at pH 1.2 was 91 %, higher than pH 7.4 at 82 % with strong adherence to Higuchi kinetics model signifying that the release of NFX is via dissolution and diffusion. The release kinetics at different pH revealed Fickian behaviour establishing the potential of HS-CMC hydrogel for sustained release of norfloxacin.

Hydrogels as functional components in artificial cell systems

Recent years have seen substantial efforts aimed at constructing artificial cells from various molecular components with the aim of mimicking the processes, behaviours and architectures found in biological systems. Artificial cell development ultimately aims to produce model constructs that progress our understanding of biology, as well as forming the basis for functional bio-inspired devices that can be used in fields such as therapeutic delivery, biosensing, cell therapy and bioremediation. Typically, artificial cells rely on a bilayer membrane chassis and have fluid aqueous interiors to mimic biological cells. However, a desire to more accurately replicate the gel-like properties of intracellular and extracellular biological environments has driven increasing efforts to build cell mimics based on hydrogels. This has enabled researchers to exploit some of the unique functional properties of hydrogels that have seen them deployed in fields such as tissue engineering, biomaterials and drug delivery. In this Review, we explore how hydrogels can be leveraged in the context of artificial cell development. We also discuss how hydrogels can potentially be incorporated within the next generation of artificial cells to engineer improved biological mimics and functional microsystems.

An Electroconductive, Thermosensitive, and Injectable Chitosan/Pluronic/Gold-Decorated Cellulose Nanofiber Hydrogel as an Efficient Carrier for Regeneration of Cardiac Tissue

Myocardial infarction is a major cause of death worldwide and remains a social and healthcare burden. Injectable hydrogels with the ability to locally deliver drugs or cells to the damaged area can revolutionize the treatment of heart diseases. Herein, we formulate a thermo-responsive and injectable hydrogel based on conjugated chitosan/poloxamers for cardiac repair. To tailor the mechanical properties and electrical signal transmission, gold nanoparticles (AuNPs) with an average diameter of 50 nm were physically bonded to oxidized bacterial nanocellulose fibers (OBC) and added to the thermosensitive hydrogel at the ratio of 1% w/v. The prepared hydrogels have a porous structure with open pore channels in the range of 50−200 µm. Shear rate sweep measurements demonstrate a reversible phase transition from sol to gel with increasing temperature and a gelation time of 5 min. The hydrogels show a shear-thinning behavior with a shear modulus ranging from 1 to 12 kPa dependent on gold concentration. Electrical conductivity studies reveal that the conductance of the polymer matrix is 6 × 10−2 S/m at 75 mM Au. In vitro cytocompatibility assays by H9C2 cells show high biocompatibility (cell viability of >90% after 72 h incubation) with good cell adhesion. In conclusion, the developed nanocomposite hydrogel has great potential for use as an injectable biomaterial for cardiac tissue regeneration.

3D Printing Mini-Capsule Device for Islet Delivery to Treat Type 1 Diabetes

Transplantation of encapsulated islets has been shown to hold a promising potential treatment for type 1 diabetes (T1D). However, there are several obstacles to overcome, such as immune rejection by the host of the grafts, sustainability of islet function, and retrievability or replacement of the encapsulated system, hinder their clinical applications. In this study, mini-capsule devices containing islets were fabricated by using digital light processing (DLP) 3D printing. To ensure a high survival rate and low immunogenicity of the fabricated islets, 20s was selected as the most suitable printing condition. Meanwhile, the mini-capsule devices with a groove structure were fabricated to prevent islet cells leakage. Subcutaneous transplantations of encapsulated islets in immunocompetent C57BL/6 mice indicated significant improvement in the symptoms of streptozotocin-induced hyperglycemia without any immunosuppression treatment for at least 15 weeks. In vivo intraperitoneal glucose tolerance tests (IPGTT) performed at different time points demonstrated therapeutically relevant glycemic ameliorate of the device. The implants retrieved after 15 weeks still contained viable and adequate numbers of islet cells. The results of this study indicate that the proposed mini-capsule device can deliver sufficient islet cell mass, prevent islet cells leakage, and maintain long-term cell survival while allowing easy retrieval. Furthermore, the proposed encapsulated islets may help with T1D cellular treatment by overcoming the obstacles of islet transplantation.

Redox-Responsive Hydrogels for Tunable and "On-Demand" Release of Biomacromolecules

In recent years, stimuli-responsive degradation has emerged as a desirable design criterion for functional hydrogels to tune the release of encapsulated payload as well as ensure degradation of the gel upon completion of its function. Herein, redox-responsive hydrogels with a well-defined network structure were obtained using a highly efficient thiol-disulfide exchange reaction. In particular, gelation occurred upon combining thiol-terminated tetra-arm polyethylene glycol (PEG) polymers with linear telechelic PEG-based polymers containing pyridyl disulfide units at their chain ends. Rapid gelation proceeds with good conversions (>85%) to yield macroporous hydrogels possessing high water uptake. Furthermore, due to the presence of the disulfide linkages, the thus-obtained hydrogels can self-heal. The obtained hydrogels undergo complete degradation when exposed to environments rich in thiol-containing agents such as dithiothreitol (DTT) and L-glutathione (GSH). Also, the release profile of encapsulated protein, namely, bovine serum albumin, can be tuned by varying the molecular weight of the polymeric precursors. Additionally, it was demonstrated that complete dissolution of the hydrogel to rapidly release the encapsulated protein occurs upon treating these hydrogels with DTT. Cytotoxicity evaluation of the hydrogels and their degradation products indicated the benign nature of these hydrogels. Additionally, the cytocompatible nature of these materials was also evident from a live/dead cell viability assay. One can envision that the facile fabrication and their ability to degrade on-demand and release their payload will make these benign polymeric scaffolds attractive for various biomedical applications.

Polysaccharide-Based Hydrogels for Microencapsulation of Stem Cells in Regenerative Medicine

Stem cell-based therapy appears as a promising strategy to induce regeneration of damaged and diseased tissues. However, low survival, poor engraftment and a lack of site-specificity are major drawbacks. Polysaccharide hydrogels can address these issues and offer several advantages as cell delivery vehicles. They have become very popular due to their unique properties such as high-water content, biocompatibility, biodegradability and flexibility. Polysaccharide polymers can be physically or chemically crosslinked to construct biomimetic hydrogels. Their resemblance to living tissues mimics the native three-dimensional extracellular matrix and supports stem cell survival, proliferation and differentiation. Given the intricate nature of communication between hydrogels and stem cells, understanding their interaction is crucial. Cells are incorporated with polysaccharide hydrogels using various microencapsulation techniques, allowing generation of more relevant models and further enhancement of stem cell therapies. This paper provides a comprehensive review of human stem cells and polysaccharide hydrogels most used in regenerative medicine. The recent and advanced stem cell microencapsulation techniques, which include extrusion, emulsion, lithography, microfluidics, superhydrophobic surfaces and bioprinting, are described. This review also discusses current progress in clinical translation of stem-cell encapsulated polysaccharide hydrogels for cell delivery and disease modeling (drug testing and discovery) with focuses on musculoskeletal, nervous, cardiac and cancerous tissues.

Self-assembled biocompatible heparin-based supramolecular hydrogel for doxorubicin delivery

An array of self-assembled biocompatible doxorubicin (DOX) loaded heparin--cyclodextrin supramolecular hydrogels (DOX@HGs) with highly encapsulated efficiency was constructed using heparin-β-cyclodextrin derivatives (Hep-β-CD), α-cyclodextrin (α-CD), pluronic F-127 and DOX via the synergy of host-guest and multiple hydrogen bonding interactions. These hydrogels were characterized by GPC measurements (GPC), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Size and zeta potential determinations, X-ray diffraction (XRD), and rheological characteristics; the data confirmed successful formation of the hydrogels. Furthermore, these hydrogels demonstrated distinctive thixotropy, indicating rapid self-repairing after continuously oscillatory shear stress. Variable release of DOX from DOX @HGs was obtained at various pH after 84 h depending on the strength of the hydrogels. At pH 7.4, cumulative DOX release was approximately 49.07% for DOX@HG 1, 32.15% for DOX@HG 2, and 27.12% for DOX@HG 3. While at pH 5.5, release of DOX was increased to 59.08% for DOX@HG 1 and to 43.2% for DOX@HG 3 after 84 h (P < 0.05). This information demonstrated that a higher DOX release rate was observed under a lower pH due to strong charge expansion of CDs and weakening of electrostatic interactions between heparin and DOX. Additionally, cytotoxicity of free DOX and DOX@HGs in ovarian cancer SKOV-3 cells was studied at various exposure durations. The results revealed that cytotoxicity of DOX@HG 1-3 toward ovarian cancer SKOV-3 cells was lower than that of free DOX (P < 0.05), suggesting prolonged DOX release from the hydrogels in SKOV-3 cells.

Combining Active Carbonic Anhydrase with Nanogels: Enzyme Protection and Zinc Sensing

Background

Due to its excellent biocompatibility, the polyacrylamide (PAAm) hydrogel has shown great potential for the immobilization of enzymes used in biomedical applications. The major challenge involved is to preserve, during the immobilization process, both the biological activity and the structural integrity of the enzymes. Here we report, for the first time, a proof-of-concept study for embedding active carbonic anhydrase (CA) into polyacrylamide (PAAm) nanogels. By immobilizing CA in these nanogels, we hope to provide important advantages, such as matrix protection of the CA as well as its targeted delivery, and also for potentially using these nanogels as zinc nano-biosensors, both in-vitro and in-vivo.

Methods and Results

Two methods are reported here for CA immobilization: encapsulation and surface conjugation. In the encapsulation method, the common process was improved, so as to best preserve the CA, by 1) using a novel biofriendly nonionic surfactant system (Span 80/Tween 80/Brij 30) and 2) using an Al₂O₃ adsorptive filtration purification procedure. In the surface conjugation method, blank PAAm nanogels were activated by N-hydroxysuccinimide and the CA was cross-linked to the nanogels. The amount of active CA immobilized in the nanoparticles was quantified for both methods. Per 1 g nanogels, the CA encapsulated nanogels contain 11.3 mg active CA, while the CA conjugated nanogels contain 22.5 mg active CA. Also, the CA conjugated nanoparticles successfully measured free Zn²⁺ levels in solution, with the Zn²⁺ dissociation constant determined to be 9 pM.

Conclusion

This work demonstrates universal methods for immobilizing highly fragile bio-macromolecules inside nanoparticle carriers, while preserving their structural integrity and biological activity. The advantages and limitations are discussed, as well as the potential biomedical applications.

Fluorescent detection of target proteins via a molecularly imprinted hydrogel

Proteins are typically separated by an immune reaction, such as an enzyme-linked immunosorbent assay, and are detected by selective fluorescent labeling. This has potential for complicated procedures and the denaturation of proteins by labeling, and is cost consuming. In this study, we propose a technique for the selective separation and detection of a target protein using a molecularly imprinted hydrogel (PI gel) with fluorescent monomers. We focused on 8-anilino-1-naphthalenesulfonic acid (ANS), where the fluorescence intensity is easily changed by the interaction with proteins, and successfully synthesized the ANS monomer and a poly(ethylene glycol) (PEG) conjugated ANS monomer. The PI gel with the ANS monomers using bovine serum albumin (BSA) as a template showed the selective adsorption of BSA and the fluorescence intensity increased due to the adsorption of BSA.

Oxygen-generating microparticles in chondrocytes-laden hydrogels by facile and versatile click chemistry strategy

Currently, oxygen supply for in vitro cell culture is one of the major challenges in tissue engineering, especially in three-dimensional (3D) structures, such as polymeric hydrogels, because oxygen is an essential element for cells survival. In this context, oxygen levels must be maintained in articular cartilage to promote the differentiation, viability, and proliferation of chondrocytes due to the low level of oxygen presence in this region. Although some technologies employ oxygen-generating materials to add sufficient oxygen levels, the limitations and challenges of current technologies include the lack of controlled, sustained, and prolonged release of the oxygen. Moreover, the fabrication methods may leave some impurities or residues resulting in toxicity to the cells. "Click" chemistry is a facile, versatile, and compatible chemical strategy to engineer hydrogels for tissue engineering applications. Herein, we disclose the engineering of oxygen-generating microparticles in chondrocytes-laden hydrogels through a versatile catalyst-free tetrazine and norbornene inverse electron demand Diels‒Alder (iEDDA) click reaction. The hydrogels combine chondroitin sulfate (CS) and poly(ethylene glycol) (PEG) crosslinked in situ, displaying tunable rheological and mechanical properties, for sustained and prolonged oxygen-release. Gene expression analysis of the chondrocytes by real-time reverse transcription polymerase chain reaction (RT-PCR) demonstrated promising cell response within the engineered hydrogel.

Methods of Encapsulation of Biomacromolecules and Living Cells. Prospects of Using Metal–Organic Frameworks

The review discusses different methods of encapsulation and biomineralization of macromolecules and living cells. Main advantages and disadvantages of most commonly used carriers, matrices, and materials for immobilization of proteins, enzymes, nucleic acids, and living cells are briefly surveyed. Examples of delivery vehicles for multifunctional encapsulation of protein-like substances are presented. Particular attention is paid to prospects of using metal–organic frameworks in medicine and biotechnology.

Visible light-curable water-soluble chitosan derivative, chitosan hydrogel, and preparation method: a patent evaluation of US2019202998A1

Introduction: Water soluble polysaccharides are versatile structural materials that can be used for the design of biocompatible hydrogels and wet dressings in wound healing applications. Glycol chitosan (GC) is an example of a multifunctional water-soluble chitosan derivative that has inherent wound healing properties and reactive sites for chemical modification.Areas covered: United States (US) patent US2019202998A1 describes the preparation of a novel wound healing technology based on a three-dimensional (3D) crosslinked GC hydrogel (GCH) wet dressing, prepared via the synthesis of PEG1K-biscarboxylic acid-g-Glycol Chitosan-g-methacrylate using visible light induced photocrosslinking. The selected polymeric network enables the encapsulation of additional growth factors or bioactives on reactive sites. Wet dressings in US2019202998A1 were evaluated against a commercially available control for in vitro release, cytotoxicity, and in vivo wound healing ability in a preliminary mouse model, with the overall wound healing performance consistent with related GC-based hydrogels.Expert opinion: Comprehensive biocompatibility and antimicrobial testing of the hydrogel is not reported in US2019202998A1, and is recommended as further work to enable clinical applicability. The invention disclosed in US2019202998A1 can potentially be integrated with 3D bioprinting and sensor technology for the preparation of 'smart' hydrogel wound dressings, and is a potential area for future research.

Microencapsulation of Lactobacillus casei and Lactobacillus rhamnosus in pectin and pectin-inulin microgel particles: Effect on bacterial survival under storage conditions

The main objective of the research was to evaluate the performance of synbiotic delivery systems using pectin microgels on the protection of two probiotic strains (Lactobacillus casei ATCC 393 and Lactobacillus rhamnosus strain GG [ATCC 53103]) to simulated gastrointestinal digestion (GD) and storage conditions (4 ± 1 °C) in a 42 days trial. Microgel particles were prepared by ionotropic gelation method and three variables were evaluated: incubation time (24 and 48 h), free vs encapsulated cells, and presence or absence of prebiotic (commercial and Jerusalem artichoke inulin). Results demonstrated an encapsulation efficiency of 96 ± 4% into particles with a mean diameter between 56 and 118 μm. The viability of encapsulated cells after 42 days storage stayed above 7 log units, being encapsulated cells in pectin-inulin microgels more resistant to GD compared to non-encapsulated cells or without prebiotics. In all cases incubation time influenced the strains' survival.

Characterization of encapsulated porcine cardiosphere-derived cells embedded in 3D alginate matrices

Myocardial infarction is caused by an interruption of coronary blood flow, leading to one of the main death causes worldwide. Current therapeutic approaches are palliative and not able to solve the loss of cardiac tissue. Cardiosphere derived cells (CDCs) reduce scarring, and increase viable myocardium, with safety and adequate biodistribution, but show a low rate engraftment and survival after implantation. In order to solve the low retention, we propose the encapsulation of CDCs within three-dimensional alginate-poly-L-lysine-alginate matrix as therapy for cardiac regeneration. In this work, we demonstrate the encapsulation of CDCs in alginate matrix, with no decrease in viability over a month, and showing the preservation of CDCs phenotype, differentiation potential, gene expression profile and growth factor release after encapsulation, moving a step forward to clinical translation of CDCs therapy in regeneration in heart failure.

Rethinking Crop Nutrition in Times of Modern Microbiology: Innovative Biofertilizer Technologies

Global population growth poses a threat to food security in an era of increased ecosystem degradation, climate change, soil erosion, and biodiversity loss. In this context, harnessing naturally-occurring processes such as those provided by soil and plant-associated microorganisms presents a promising strategy to reduce dependency on agrochemicals. Biofertilizers are living microbes that enhance plant nutrition by either by mobilizing or increasing nutrient availability in soils. Various microbial taxa including beneficial bacteria and fungi are currently used as biofertilizers, as they successfully colonize the rhizosphere, rhizoplane or root interior. Despite their great potential to improve soil fertility, biofertilizers have yet to replace conventional chemical fertilizers in commercial agriculture. In the last 10 years, multi-omics studies have made a significant step forward in understanding the drivers, roles, processes, and mechanisms in the plant microbiome. However, translating this knowledge on microbiome functions in order to capitalize on plant nutrition in agroecosystems still remains a challenge. Here, we address the key factors limiting successful field applications of biofertilizers and suggest potential solutions based on emerging strategies for product development. Finally, we discuss the importance of biosafety guidelines and propose new avenues of research for biofertilizer development.

Bacteriophage-Delivering Hydrogels: Current Progress in Combating Antibiotic Resistant Bacterial Infection

Antibiotic resistance remains as an unresolved global challenge in the health care system, posing serious threats to global health. As an alternative to antibiotics, bacteriophage (phage) therapy is rising as a key to combating antibiotic-resistant bacterial infections. In order to deliver a phage to the site of infection, hydrogels have been formulated to incorporate phages, owing to its favorable characteristics in delivering biological molecules. This paper reviews the formulation of phage-delivering hydrogels for orthopedic implant-associated bone infection, catheter-associated urinary tract infection and trauma-associated wound infection, with a focus on the preparation methods, stability, efficacy and safety of hydrogels as phage carriers.

Recent advances in the structure, synthesis, and applications of natural polymeric hydrogels

Hydrogels, polymeric network materials, are capable of swelling and holding the bulk of water in their three-dimensional structures upon swelling. In recent years, hydrogels have witnessed increased attention in food and biomedical applications. In this paper, the available literature related to the design concepts, types, functionalities, and applications of hydrogels with special emphasis on food applications was reviewed. Hydrogels from natural polymers are preferred over synthetic hydrogels. They are predominantly used in diverse food applications for example in encapsulation, drug delivery, packaging, and more recently for the fabrication of structured foods. Natural polymeric hydrogels offer immense benefits due to their extraordinary biocompatible nature. Hydrogels based on natural/edible polymers, for example, those from polysaccharides and proteins, can serve as prospective alternatives to synthetic polymer-based hydrogels. The utilization of hydrogels has so far been limited, despite their prospects to address various issues in the food industries. More research is needed to develop biomimetic hydrogels, which can imitate the biological characteristics in addition to the physicochemical properties of natural materials for different food applications.

Multi-responsive, injectable, and self-healing hydrogels based on benzoxaborole–tannic acid complexation

A bio-inspired, multi-responsive, injectable, and self-healing hydrogel was developed via the interaction of tannic acid (TA) and benzoxaborole-based linear copolymers.

Biopolymers for hydrogels in cosmetics: review

Hydrogels are cross-linked networks of macromolecular compounds characterized by high water absorption capacity. Such materials find a wide range of biomedical applications. Several polymeric hydrogels can also be used in cosmetics. Herein, the structure, properties and selected applications of hydrogels in cosmetics are discussed in general. Detailed examples from scientific literature are also shown. In this review paper, most common biopolymers used in cosmetics are presented in detail together with issues related to skin treatment and hair conditioning. Hydrogels based on collagen, chitosan, hyaluronic acid, and other polysaccharides have been characterized. New trends in the preparation of hydrogels based on biopolymer blends as well as bigels have been shown. Moreover, biopolymer hydrogels employment in encapsulation has been mentioned.

Insulin-Producing Cell Transplantation Platform for Veterinary Practice

Diabetes mellitus (DM) remains a global concern in both human and veterinary medicine. Type I DM requires prolonged and consistent exogenous insulin administration to address hyperglycemia, which can increase the risk of diabetes complications such as retinopathy, nephropathy, neuropathy, and heart disorders. Cell-based therapies have been successful in human medicine using the Edmonton protocol. These therapies help maintain the production of endogenous insulin and stabilize blood glucose levels and may possibly be adapted to veterinary clinical practice. The limited number of cadaveric pancreas donors and the long-term use of immunosuppressive agents are the main obstacles for this protocol. Over the past decade, the development of potential therapies for DM has mainly focused on the generation of effective insulin-producing cells (IPCs) from various sources of stem cells that can be transplanted into the body. Another successful application of stem cells in type I DM therapies is transplanting generated IPCs. Encapsulation can be an alternative strategy to protect IPCs from rejection by the body due to their immunoisolation properties. This review summarizes current concepts of IPCs and encapsulation technology for veterinary clinical application and proposes a potential stem-cell-based platform for veterinary diabetic regenerative therapy.

Synthesis and Applications of Hydrogels in Cancer Therapy

Hydrogels are water-insoluble, hydrophilic, cross-linked, three-dimensional networks of polymer chains having the ability to swell and absorb water but do not dissolve in it, that comprise the major difference between gels and hydrogels. The mechanical strength, physical integrity and solubility are offered by the crosslinks. The different applications of hydrogels can be derived based on the methods of their synthesis, response to different stimuli, and their different kinds. Hydrogels are highly biocompatible and have properties similar to human tissues that make it suitable to be used in various biomedical applications, including drug delivery and tissue engineering. The role of hydrogels in cancer therapy is highly emerging in recent years. In the present review, we highlighted different methods of synthesis of hydrogels and their classification based on different parameters. Distinctive applications of hydrogels in the treatment of cancer are also discussed.

Molecular balloon, Pd6L8 cages: recognition of alkyl sulfate surfactants

Significant structural contraction and expansion of flexible Pd₆L₈ cages by encapsulation of alkyl sulfate were demonstrated. The contact angles on the fine-ground microcrystal layers shift according to the chain length of the alkyl sulfate.

Review of Advanced Hydrogel-Based Cell Encapsulation Systems for Insulin Delivery in Type 1 Diabetes Mellitus

: Type 1 Diabetes Mellitus (T1DM) is characterized by the autoimmune destruction of β-cells in the pancreatic islets. In this regard, islet transplantation aims for the replacement of the damaged β-cells through minimally invasive surgical procedures, thereby being the most suitable strategy to cure T1DM. Unfortunately, this procedure still has limitations for its widespread clinical application, including the need for long-term immunosuppression, the lack of pancreas donors and the loss of a large percentage of islets after transplantation. To overcome the aforementioned issues, islets can be encapsulated within hydrogel-like biomaterials to diminish the loss of islets, to protect the islets resulting in a reduction or elimination of immunosuppression and to enable the use of other insulin-producing cell sources. This review aims to provide an update on the different hydrogel-based encapsulation strategies of insulin-producing cells, highlighting the advantages and drawbacks for a successful clinical application.

Hydrogels Based Drug Delivery Synthesis, Characterization and Administration

Hydrogels represent 3D polymeric networks specially designed for various medical applications. Due to their porous structure, they are able to swollen and to entrap large amounts of therapeutic agents and other molecules. In addition, their biocompatibility and biodegradability properties, together with a controlled release profile, make hydrogels a potential drug delivery system. In vivo studies have demonstrated their effectiveness as curing platforms for various diseases and affections. In addition, the results of the clinical trials are very encouraging and promising for the use of hydrogels as future target therapy strategies.